Donor and Acceptor Unit Sequences Influence Material Performance in Benzo[1,2‐b:4,5‐b′]dithiophene–6,7‐Difluoroquinoxaline Small Molecule Donors for BHJ Solar Cells

Well‐defined small molecule (SM) donors can be used as alternatives to π‐conjugated polymers in bulk‐heterojunction (BHJ) solar cells with fullerene acceptors (e.g., PC₆₁/₇₁BM). Taking advantage of their synthetic tunability, combinations of various donor and acceptor motifs can lead to a wide range of optical, electronic, and self‐assembling properties that, in turn, may impact material performance in BHJ solar cells. In this report, it is shown that changing the sequence of donor and acceptor units along the π‐extended backbone of benzo[1,2‐b:4,5‐b′]dithiophene–6,7‐difluoroquinoxaline SM donors critically impacts (i) molecular packing, (ii) propensity to order and preferential aggregate orientations in thin‐films, and (iii) charge transport in BHJ solar cells. In these systems ( SM1‐3 ), it is found that 6,7‐difluoroquinoxaline ([2F]Q) motifs directly appended to the central benzo[1,2‐b:4,5‐b′]dithiophene (BDT) unit yield a lower‐bandgap analogue ( SM1 ) with favorable molecular packing and aggregation patterns in thin films, and optimized BHJ solar cell efficiencies of ≈6.6%. ¹H‐¹H DQ‐SQ NMR analyses indicate that SM1 and its counterpart with [2F]Q motifs substituted as end‐group SM3 possess distinct self‐assembly patterns, correlating with the significant charge transport and BHJ device efficiency differences observed for the two analogous SM donors (avg. 6.3% vs 2.0%, respectively).     

Molecular Orientation Unified Nonfullerene Acceptor Enabling 14% Efficiency As‐Cast Organic Solar Cells

Molecular orientation and π–π stacking of nonfullerene acceptors (NFAs) determine its domain size and purity in bulk‐heterojunction blends with a polymer donor. Two novel NFAs featuring an indacenobis(dithieno[3,2‐b:2?,3?‐d]pyrrol) core with meta‐ or para‐alkoxyphenyl sidechains are designed and denoted as m‐INPOIC or p‐INPOIC , respectively. The impact of the alkoxyl group positioning on molecular orientation and photovoltaic performance of NFAs is revealed through a comparison study with the counterpart ( INPIC‐4F ) bearing para‐alkylphenyl sidechains. With inward constriction toward the conjugated backbone, m‐INPOIC presents predominant face‐on orientation to promote charge transport. The as‐cast organic solar cells (OSCs) by blending m‐INPOIC and PBDB‐T as active layers exhibit a power conversion efficiency (PCE) of 12.1%. By introducing PC₇₁BM as the solid processing‐aid, the ternary OSCs are further optimized to deliver an impressive PCE of 14.0%, which is among the highest PCEs for as‐cast single‐junction OSCs reported in literature to date. More attractively, PBDB‐T: m‐INPOIC :PC₇₁BM based OSCs exhibit over 11% PCEs even with an active layer thickness over 300 nm. And the devices can retain over 95% of PCE after storage for 20 days. The outstanding tolerance to film thickness and outstanding stability of the as‐cast devices make m‐INPOIC a promising candidate NFA for large‐scale solution‐processable OSCs.     

10.8% Efficiency Polymer Solar Cells Based on PTB7‐Th and PC71BM via Binary Solvent Additives Treatment

In this work, polymer solar cells are fabricated based on the blend of PTB7‐Th: PC₇₁BM by using a mixed solvent additive of 1,8‐diiodooctane and N‐methyl pyrrolidone to optimize the morphology of the blend. A high power conversion efficiency (PCE) of 10.8% has been achieved with a simple conventional device. In order to deeply investigate the influence of the mixed solvent additives on the morphology and device performance, the variations of the molecular packing and bulk morphology of the blend film cast from ortho‐dichlorobenzene with single or binary solvent additives are measured. Although all the blend films exhibit similar domain size and nanoscale phase separation, the blend film processed with mixed solvent additive shows the highest domain purity, resulting in the least bimolecular recombination, relatively high J_sc and FF, and hence enhanced PCE. Therefore, the best photovoltaic performance with the V_oc of 0.82 V, J_sc of 19.1 mA cm^?2, FF of 69.1%, and PCE of 10.8% are obtained for the device based on the blend with binary solvent additive treatment.     

NbF5: A Novel α‐Phase Stabilizer for FA‐Based Perovskite Solar Cells with High Efficiency

The HC(NH₂)₂⁺(FA⁺) is a well‐known substitute to CH₃NH₃⁺(MA⁺) for its capability to extend light utilization for improved power conversion efficiency for perovskite solar cells; unfortunately, the dark cubic phase (α‐phase) can easily transition to the yellow orthorhombic phase (δ‐phase) at room temperature, an issue that prevents its commercial application. In this report, an inorganic material (NbF₅) is developed to stabilize the desired α‐phase perovskite material by incorporating NbF₅ additive into the perovskite films. It is found that the NbF₅ additive effectively suppresses the formation of the yellow δ‐phase in the perovskite synthesis and aging process, thus enhancing the humidity and light‐soaking stability of the perovskite film. As a result, the perovskite solar cells with the NbF₅ additive exhibit improved air stability by tenfold, retaining nearly 80% of their initial efficiency after aging in air for 50 d. In addition, under full‐sun AM 1.5 G illumination of a xenon lamp without any UV‐reduction, the perovskite solar cells with the NbF₅ additive also show fivefold improved illumination stability than the control devices without NbF₅.     

Difluorobenzothiadiazole‐Based Small‐Molecule Organic Solar Cells with 8.7% Efficiency by Tuning of π‐Conjugated Spacers and Solvent Vapor Annealing

The synthesis of a series of tetrafluorine‐substituted, wide‐bandgap, small molecules consisting of various π‐conjugated spacers (furan, thiophene, selenophene) between indacenodithiophene as the electron‐donating core and the electron‐deficient difluorobenzothiadiazole unit is reported and the effect of the π‐conjugated spacers on the photovoltaic properties is investigated. The alteration of the π‐conjugated spacer enables fine‐tuning of the photophysical properties and energy levels of the small molecules, and allows the adjustment of the charge‐transport properties, the morphology of the photoactive films, as well as their photovoltaic properties. Moreover, most of these devices exhibit superior device performances after CH₂Cl₂ solvent annealing than without annealing, with a high fill factor (0.70–0.75 for all cases). Notably, the devices based on the new molecule BIT4FTh (with thiophene as the spacer) show an outstanding PCE of 8.7% (with an impressive FF of 0.75), considering its wide‐bandgap (1.81 eV), which is among the highest efficiencies reported so far for small‐molecules‐based solar cells. The morphologies of the photoactive layers with/without CH₂Cl₂ solvent annealing are characterized by atomic force microscopy, transmission electron microscopy and two‐dimensional grazing incidence X‐ray diffraction analysis. The results reported here clearly indicate that highly efficient small‐molecules‐based solar cells can be achieved through rational design of their molecular structure and optimization of the phase‐separated morphology via an adapted solvent–vapor annealing process.     

Efficient and Scalable Large-Area Organic Solar Cells by Asymmetric Nonfullerene Acceptors Based on 9H-Indeno[1,2-b]pyrazine-2,3,8-Tricarbonitrile

It remains challenging to fabricate efficient, scalable large-area organic solar cells (OSCs) owing to the unfavorable morphology of photoactive blend films. To address this challenge, two asymmetric nonfullerene acceptors (NFAs) IPC1CN-BBO-IC2F and IPC1CN-BBO-IC2Cl are synthesized, where 12,13-bis(2-butyloctyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2′“,3′”:4′,5′]thieno[2′,3′:4,5]pyrrolo[3,2-g]thieno[2′,3′:4,5]thieno-[3,2-b]indole (BBO) is the molecular core, and two types of end groups are appended to its ends, namely the 9H-indeno[1,2-b]pyrazine-2,3,8-tricarbonitrile (IPC1CN) end group and one of 2-(5,6-dihalo-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile end groups (IC2F or IC2Cl). These NFAs facilitate effective tuning of light absorption and energy levels, offer high carrier mobilities, and allow for the formation of appropriate morphologies. Note that these benefits apply even to large-area devices, unlike typical Y6-based NFAs. In addition, a random copolymer PM6-PBDBT(55) is synthesized and its energy levels are optimally matched with those of the asymmetric NFAs. The blade-coated 1 cm²-area OSCs based on PM6-PBDBT(55):IPC1CN-BBO-IC2Cl exhibit a PCE of 14.12%, which is higher than that of PM6-PBDBT(55)-IPC1CN-BBO-IC2F-based OSCs. More importantly, the PM6-PBDBT(55):IPC1CN-BBO-IC2Cl-based large-area (58.50 cm²) modules yield an impressive PCE of 11.28% with a small cell-to-module loss in fill factor. These results suggest that a combination of the asymmetric molecular design using the IPC1CN group and the terpolymer strategy will pave a new path for fabricating highly efficient and scalable large-area OSCs.     

Naphtho[1,2‐c:5,6‐c′]bis[1,2,5]thiadiazole‐Containing π‐Conjugated Compound: Nonfullerene Electron Acceptor for Organic Photovoltaics

The development of nonfullerene acceptor materials applicable to organic photovoltaics (OPVs) has attracted considerable attention for the achievement of a high power conversion efficiency (PCE) in recent years. However, it is still challenging due to the insufficiency of both the variety of effective electron‐deficient units and certain guidelines for the design of such materials. This work focusses on naphtho[1,2‐c:5,6‐c′]bis[1,2,5]thiadiazole (NTz) as a key electron‐deficient unit. Therefore, a new electron‐accepting π‐conjugated compound (NTz‐Np), whose structure is based on the combination of NTz and the fluorene‐containing imide‐annelated terminal units (Np), is designed and synthesized. The NTz‐Np compound exhibits a narrow optical energy gap (1.73 eV), a proper energy level (?3.60 eV) of the lowest unoccupied molecular orbital, and moderate electron mobility (1.6 × 10^?5 cm² V^?1 s^?1), indicating that NTz‐Np has appropriate characteristics as an acceptor against poly(3‐hexylthiophene) (P3HT), a representative donor. OPV devices based on NTz‐Np under the blend with P3HT show high photovoltaic performance with a PCE of 2.81%, which is the highest class among the P3HT/nonfullerene‐based OPVs with the conventional device structure. This result indicates that NTz unit can be categorized as a potential electron‐deficient unit for the nonfullerene acceptors.     

Boosting Performance of Non‐Fullerene Organic Solar Cells by 2D g‐C3N4 Doped PEDOT:PSS

The power‐conversion efficiency (PCE) of single‐junction organic solar cells (OSCs) has exceeded 16% thanks to the development of non‐fullerene acceptor materials and morphological optimization of active layer. In addition, interfacial engineering always plays a crucial role in further improving the performance of OSCs based on a well‐established active‐layer system. Doping of graphitic carbon nitride (g‐C₃N₄) into poly(3,4‐ethylene‐dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) as a hole transport layer (HTL) for PM6:Y6‐based OSCs is reported, boosting the PCE to almost 16.4%. After being added into the PEDOT:PSS, the g‐C₃N₄ as a Bronsted base can be protonated, weakening the shield effect of insulating PSS on conductive PEDOT, which enables exposures of more PEDOT chains on the surface of PEDOT:PSS core‐shell structure, and thus increasing the conductivity. Therefore, at the interface between g‐C₃N₄ doped HTL and PM6:Y6 layer, the charge transport is improved and the charge recombination is suppressed, leading to the increases of fill factor and short‐circuit current density of devices. This work demonstrates that doping g‐C₃N₄ into PEDOT:PSS is an efficient strategy to increase the conductivity of HTL, resulting in higher OSC performance.     

A Highly Crystalline Fused‐Ring n‐Type Small Molecule for Non‐Fullerene Acceptor Based Organic Solar Cells and Field‐Effect Transistors

N‐type organic small molecules (SMs) are attracting attention in the organic electronics field, due to their easy purification procedures with high yield. However, only a few reports show SMs that perform well in both organic field‐effect transistors (OFETs) and organic solar cells (OSCs). Here, the synthesis and characterization of an n‐type small molecule with an indacenodithieno[3,2‐b]thiophene (IDTT) core unit and linear alkylated side chain (C₁₆) (IDTTIC) are reported. Compared to the state‐of‐the‐art n‐type molecule IDTIC, IDTTIC exhibits smaller optical bandgap and higher absorption coefficient, which is due to the enhanced intramolecular effect. After mixing with the polymer donor PBDB‐T, IDTIC‐based solar cells deliver a power conversion efficiency of only 5.67%. In stark contrast, the OSC performance of IDTTIC improves significantly to 11.2%. It is found that the superior photovoltaic properties of PBDB‐T:IDTTIC blends are mainly due to reduced trap‐assisted recombination and enhanced molecular packing coherence length and higher domain purity when compared to IDTIC. Moreover, a significantly higher electron mobility of 0.50 cm² V⁻¹ s⁻¹ for IDTTIC in OFET devices than for IDTIC (0.15 cm² V⁻¹ s⁻¹) is obtained. These superior performances in OSCs and OFETs demonstrate that SMs with extended π‐conjugation of the backbone possess a great potential for application in organic electronic devices.     

Alternating Copolymers of Cyclopenta[2,1‐b;3,4‐b′]dithiophene and Thieno[3,4‐c]pyrrole‐4,6‐dione for High‐Performance Polymer Solar Cells

A series of alternating copolymers of cyclopenta[2,1‐b;3,4‐b′]dithiophene (CPDT) and thieno[3,4‐c]pyrrole‐4,6‐dione (TPD) have been prepared and characterized for polymer solar cell (PSC) applications. Different alkyl side chains, including butyl (Bu), hexyl (He), octyl (Oc), and 2‐ethylhexyl (EH), are introduced to the TPD unit in order to adjust the packing of the polymer chain in the solid state, while the hexyl side chain on the CPDT unit remains unchanged to simplify discussion. The polymers in this series have a simple main chain structure and can be synthesized easily, have a narrow band gap and a broad light absorption. The different alkyl chains on the TPD unit not only significantly influence the solubility and chain packing, but also fine tune the energy levels of the polymers. The polymers with Oc or EH group have lower HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital) energy levels, resulting higher open circuit voltages (V_oc) of the PSC devices. Power conversion efficiencies (PCEs) up to 5.5% and 6.4% are obtained from the devices of the Oc substituted polymer (PCPDTTPD‐Oc) with PC₆₁BM and PC₇₁BM, respectively. This side chain effect on the PSC performance is related to the formation of a fine bulk heterojunction structure of polymer and PCBM domains, as observed with atomic force microscopy.     

Efficient Red/Near‐Infrared Fluorophores Based on Benzo[1,2‐b:4,5‐b′]dithiophene 1,1,5,5‐Tetraoxide for Targeted Photodynamic Therapy and In Vivo Two‐Photon Fluorescence Bioimaging

Red/near‐infrared dyes are highly demanded for biological applications but most of them are far from satisfactory. In this work, a series of red/near‐infrared fluorophores based on electron‐withdrawing benzo[1,2‐b:4,5‐b′]dithiophene 1,1,5,5‐tetraoxide (BDTO) are synthesized and characterized. They possess both aggregation‐induced emission, and hybridized local and charge‐transfer characteristics. Crystallographic, spectroscopic, electrochemical and computational results reveal that the oxidation of benzo[1,2‐b:4,5‐b′]dithiophene to BDTO can endow the fluorophores with greatly red‐shifted emission, enhanced emission efficiency, reduced energy levels, enlarged two‐photon absorption cross section, and increased reactive oxygen species generation efficiency. The nanoparticles fabricated with a near‐infrared fluorophore TPA‐BDTO show high photostability and biocompatibility with good performance in targeted photodynamic ablation of cancer cells and two‐photon fluorescence imaging of intravital mouse brain vasculature.     

Dithieno[3,2‐b:2′,3′‐d]pyrrol‐Cored Hole Transport Material Enabling Over 21% Efficiency Dopant‐Free Perovskite Solar Cells

Dopant‐free hole transport materials (HTMs) are essential for commercialization of perovskite solar cells (PSCs). However, power conversion efficiencies (PCEs) of the state‐of‐the‐art PSCs with small molecule dopant‐free HTMs are below 20%. Herein, a simple dithieno[3,2‐b:2′,3′‐d]pyrrol‐cored small molecule, DTP‐C6Th, is reported as a promising dopant‐free HTM. Compared with commonly used spiro‐OMeTAD, DTP‐C6Th exhibits a similar energy level, a better hole mobility of 4.18 × 10^?4 cm² V^?1 s^?1, and more efficient hole extraction, enabling efficient and stable PSCs with a dopant‐free HTM. With the addition of an ultrathin poly(methyl methacrylate) passivation layer and properly tuning the composition of the perovskite absorber layer, a champion PCE of 21.04% is achieved, which is the highest value for small molecule dopant‐free HTM based PSCs to date. Additionally, PSCs using the DTP‐C6Th HTM exhibit significantly improved long‐term stability compared with the conventional cells with the metal additive doped spiro‐OMeTAD HTM. Therefore, this work provides a new candidate and effective device engineering strategy for achieving high PCEs with dopant‐free HTMs.     

FAPbI3‐Based Perovskite Solar Cells Employing Hexyl‐Based Ionic Liquid with an Efficiency Over 20% and Excellent Long‐Term Stability

Formamidinium lead triiodide (FAPbI₃)‐based perovskite materials are of interest for photovoltaics in view of their close‐to‐ideal bandgap, allowing absorption of photons over a broad solar spectrum. However, FAPbI₃‐based materials suffer from a notorious phase transition from the photoactive black phase (α‐FAPbI₃) to nonperovskite yellow phase (δ‐FAPbI₃) under ambient conditions. This transition dramatically reduces light absorbtion, thus, degrading the photovoltaic performance and stability of ensuring solar cells. In this study, 1‐hexyl‐3‐methylimidazolium iodide (HMII) ionic liquid (IL) is employed as an additive for the first time in FAPbI₃ perovskite to overcome the above‐mentioned issues. HMII incorporation facilitates the grain coarsening of FAPbI₃ crystal owing to its high‐polarity and high‐boiling point, which yields liquid domains between neighboring grains to reduce the activation energy of the grain‐boundary migration. As a result, the FAPbI₃ active layer exhibits micron‐sized grains with substantially suppressed parasitic traps with an Urbach energy reduced by 2 meV. Hence, the resulting perovskite solar cell achieves an efficiency of 20.6% with notable increase in open circuit voltage (V_OC) of 80 mV compared with HMII‐free cells (17.1%). More importantly, the HMII‐doped FAPbI₃‐based cells show a striking enhancement in shelf‐stability under high humidity and thermal stress, retaining >80% of their initial efficiencies at 60 ± 10% relative humidity and ≈95% at 65 °C.     

Highly Stable and Efficient Perovskite Solar Cells with 22.0% Efficiency Based on Inorganic–Organic Dopant‐Free Double Hole Transporting Layers

Most of the high performance in perovskite solar cells (PSCs) have only been achieved with two organic hole transporting materials: 2,2′,7,7′‐tetrakis(N,N‐di‐p‐methoxyphenylamine)‐9,9‐spirobifluorene (Spiro‐OMeTAD) and poly(triarylamine) (PTAA), but their high cost and low stability caused by the hygroscopic dopant greatly hinder the commercialization of PSCs. One effective alternative to address this problem is to utilize inexpensive inorganic hole transporting layer (i‐HTL), but obtaining high efficiency via i‐HTLs has remained a challenge. Herein, a well‐designed inorganic–organic double HTL is constructed by introducing an ultrathin polymer layer dithiophene‐benzene (DTB) between CuSCN and Au contact. This strategy not only enhances the hole extraction efficiency through the formation of cascaded energy levels, but also prevents the degradation of CuSCN caused by the reaction between CuSCN and Au electrode. Furthermore, the CuSCN layer also promotes the formation of a pinhole‐free and compact DTB over layer in the CuSCN/DTB structure. Consequently, the PSCs fabricated with this CuSCN/DTB layer achieves the power conversion efficiency of 22.0% (certified: 21.7%), which is among the top efficiencies for PSCs based on dopant‐free HTLs. Moreover, the fabricated PSCs exhibit high light stability under more than 1000 h of light illumination and excellent environmental stability at high temperature (85 °C) or high relative humidity (>60% RH).     

Achieving a High Fill Factor and Stability in Perylene Diimide–Based Polymer Solar Cells Using the Molecular Lock Effect between 4,4′‐Bipyridine and a Tri(8‐hydroxyquinoline)aluminum(III) Core

Two novel perylene diimide (PDI)–based derivatives, Alq₃‐PDI and Alq₃‐PDI 2, are synthesized by flanking a 3D tri(8‐hydroxyquinoline)aluminum(III) (Alq₃) core with PDI and a helical PDI dimer (PDI2) to construct high‐performance small molecular nonfullerene acceptors (SMAs). The 3D Alq₃ core significantly suppresses the molecular aggregation of the resulting SMAs, leading to a well‐mixed blend with a PTTEA donor polymer and weak phase separation. Compared with Alq₃‐PDI , the extended π‐conjugation of Alq₃‐PDI2 results in higher‐order molecular packing, which improves the absorption and phase separation behavior. Thus, the Alq₃‐PDI2 devices have higher J_sc and FF values and better device performance, which are further enhanced by a small amount of 4,4′‐bipyridine (Bipy) as an additive. The coordination between Bipy and the Alq₃ core promotes molecular packing and phase separation, which lower charge recombination and enhanced charge collection in the resulting devices. Therefore, a largely improved J_sc of 15.74 mA cm^?2 and very high FF of 71.27% are obtained in the Alq₃‐PDI2 devices, resulting in a power conversion efficiency of 9.54%, which is the best value reported for PDI‐based polymer solar cells. The coordination can also serve as a “molecular lock,” which prevents molecular motion and thus improves device stability.     

Hole Transport Materials Based on 6,12‐Dihydroindeno[1,2‐b]fluorine with Different Periphery Groups: A New Strategy for Dopant‐Free Perovskite Solar Cells

Although several hole‐transporting materials (HTMs) have been designed to obtain perovskite solar cells (PSCs) devices with high performance, the dopant‐free HTMs for efficient and stable PSCs remain rare. Herein, a rigid planar 6,12‐dihydroindeno[1,2‐b]fluorine (IDF) core with different numbers of bulky periphery groups to construct dopant‐free HTMs of IDF‐SFXPh, IDF‐DiDPA, and IDF‐TeDPA is modified. Thanks to the contributions of the planar IDF core and the twisted SFX periphery groups, the dopant‐free IDF‐SFXPh‐based PSCs device achieves a device performance of 17.6%, comparable to the doped 2,2′,7,7′‐tetrakis(N,N‐di‐p‐methoxyphenylamine)‐9,9′‐spirobifluorene (spiro‐OMeTAD)‐based device (17.6%), with much enhanced device stability under glovebox and ambient conditions.     

Wide Bandgap Copolymers Based on Quinoxalino[6,5‐f].quinoxaline for Highly Efficient Nonfullerene Polymer Solar Cells

Two novel wide bandgap copolymers based on quinoxalino[6,5‐f]quinoxaline (NQx) acceptor block, PBDT–NQx and PBDTS–NQx, are successfully synthesized for efficient nonfullerene polymer solar cells (PSCs). The attached conjugated side chains on both benzodithiophene (BDT) and NQx endow the resulting copolymers with low‐lying highest occupied molecular orbital (HOMO) levels. The sulfur atom insertion further reduces the HOMO level of PBDTS–NQx to ?5.31 eV, contributing to a high open‐circuit voltage, V _oc, of 0.91 V. Conjugated n ‐octylthienyl side chains attached on the NQx skeletons also significantly improve the π–π* transitions and optical absorptions of the copolymers in the region of short wavelengths, which induce a good complementary absorption when blending with the low bandgap small molecular acceptor of 3,9‐bis(2‐methylene‐(3‐(1,1‐dicyanomethylene)‐indanone))‐5,5,11,11‐tetrakis(4‐hexylphenyl)‐dithieno[2,3‐d:2′,3′‐d′]‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene. The wide absorption range makes the active blends absorb more photons, giving rise to a high short‐circuit current density, J _sc, value of 15.62 mA cm^?2. The sulfur atom insertion also enhances the crystallinity of PBDTS–NQx and presents its blend film with a favorable nanophase separation, resulting in improved J _sc and fill factor (FF) values with a high power conversion efficiency of 11.47%. This work not only provides a new fused ring acceptor block (NQx) for constructing high‐performance wide bandgap copolymers but also provides the NQx‐based copolymers for achieving highly efficient nonfullerene PSCs.