Quantum Dot Light‐Emitting Transistors—Powerful Research Tools and Their Future Applications

In this progress report, the recent work in the field of light‐emitting field‐effect transistors (LEFETs) based on colloidal quantum dots (CQDs) as emitters is highlighted. These devices combine the possibility of electrical switching, as known from field‐effect transistors, with the possibility of light emission in a single device. The properties of field‐effect transistors and the prerequisites of LEFETs are reviewed, before motivating the use of colloidal quantum dots for light emission. Recent reports on these quantum dot light‐emitting field‐effect transistors (QDLEFETs) include both materials emitting in the near infrared and the visible spectral range—underlining the great potential and breadth of applications for QDLEFETs. The way in which LEFETs can further the understanding of the CQD material properties—their photophysics as well as the carrier transport through films—is discussed. In addition, an overview of technology areas offering the potential for large impact is provided.     

Recent Developments and Novel Applications of Thin Film,Light‐Emitting Transistors

Light‐emitting field‐effect transistors (LEFETs) combine switching and amplification with light emission and thus represent an interesting optoelectronic device. They are not limited anymore to a few examples and specific materials but are nearly universal for a wide range of semiconductors, from organic to inorganic and nanoscale. This review introduces the basic working principles of lateral unipolar and ambipolar LEFETs and discusses recent examples based on various solution‐processed semiconducting materials. Applications beyond simple light emission are presented and possible future directions for light‐emitting transistors with added functionalities are outlined.     

Ambipolar Light‐Emitting Transistors of a Tetracene Single Crystal

The first ambipolar light‐emitting transistor of an organic molecular semiconductor single crystal, tetracene, is demonstrated. In the device configuration, electrons and holes injected from separate magnesium and gold electrodes recombined radiatively within the channel. By varying the applied voltages, the position of the recombination/emission zone could be moved to any position along the channel. Because of the changes made to the device structure, including the use of single crystals and polymer dielectric layers and the adoption of an inert‐atmosphere fabrication process, the set of materials that can be used for light‐emitting transistors has been expanded to include monomeric molecular semiconductors.     

Organic Light‐Emitting Transistors Containing a Laterally Arranged Heterojunction

An approach to produce organic light‐emitting transistors (OLETs) containing a laterally arranged heterojunction structure, which minimizes exciton quenching at the metal electrodes, is described. This device configuration provides an organic light‐emitting diode (OLED) structure where the anode (source) electrode, hole‐transport material (field‐effect material), light‐emitting material, and cathode (drain) electrode are laterally arranged, thus offering a chance to control the electroluminescent intensity by changing the gate bias. Pentacene and tris(8‐quinolinolato)aluminum (Alq₃) are employed as the field‐effect and light‐emitting materials, respectively. The laterally arranged heterojunction structures are achieved by successively inclined deposition of the field‐effect and light‐emitting materials. After deposition of pentacene, a narrow gap of about 10–20 nm between the drain electrode and pentacene was obtained, thereby creating an opportunity to fabricate a laterally arranged heterojunction. In the OLETs, unsymmetrical source and drain electrodes, that is, Au and LiF/Al ones, are used to ensure efficient injection of holes and electrons. Visible‐light emission from OLETs is observed under ambient atmosphere. This result is ascribed to efficient carrier injection and transport, formation of a heterojunction, as well as good luminescence from the organic emissive layer. The device structure serves as an excellent model system for OLETs and demonstrates a general concept of adjusting the charge‐carrier injection and transport, as well as the electroluminescent properties, by forming laterally arranged heterojunctions.     

High Mobility and Luminescent Efficiency in Organic Single‐Crystal Light‐Emitting Transistors

A high‐performance ambipolar light‐emitting transistor (LET) that has high hole and electron mobilities and excellent luminescence characteristics is described. By using this device, a conspicuous light‐confined edge emission and current‐density‐dependent spectral evolution are observed. These findings will result in broader utilization of device potential and they provide a promising route for realizing electrically driven organic lasers.     

Flexible and Stretchable Smart Display: Materials,Fabrication, Device Design,and System Integration

Recent technological advances in nanomaterials have driven the development of high‐performance light‐emitting devices with flexible and stretchable form factors. Deformability in such devices is mainly achieved by replacing the rigid materials in the device components with flexible nanomaterials and their assemblies (e.g., carbon nanotubes, silver nanowires, graphene, and quantum dots) or with intrinsically soft materials and their composites (e.g., polymers and elastomers). Downscaling the dimensions of the functional materials to the nanometer range dramatically decreases their flexural rigidity, and production of polymer/elastomer composites with functional nanomaterials provides light‐emitting devices with flexibility and stretchability. Furthermore, monolithic integration of these light‐emitting devices with deformable sensors furnishes the resulting display with various smart functions such as force/capacitive touch‐based data input, personalized health monitoring, and interactive human–machine interfacing. These ultrathin, lightweight, and deformable smart optoelectronic devices have attracted widespread interest from materials scientists and device engineers. Here, a comprehensive review of recent progress concerning these flexible and stretchable smart displays is presented with a focus on materials development, fabrication techniques, and device designs. Brief overviews of an integrated system of advanced smart displays and cutting‐edge wearable sensors are also presented, and, to conclude, a discussion of the future research outlook is given.     

Solution‐Processed Organic Light‐Emitting Transistors Incorporating Conjugated Polyelectrolytes

Improved performance of p‐type organic light‐emitting transistors (OLETs) is demonstrated by introducing a conjugated polyelectrolyte (CPE) layer and symmetric high work function (WF) source and drain metal electrodes. The OLET comprises a tri‐layer film consisting of a hole transporting layer, an emissive layer, and a CPE layer as an electron injection layer. The thickness of the CPE layer is critical for achieving good performance and provides an important structural handle for consideration in future optimization studies. We also demonstrate for the first time, good performance solution‐processed blue‐emitting OLETs. These results further demonstrate the simplification of device fabrication and improved performance afforded by integrating CPE interlayers into organic optoelectronic devices.     

Simultaneous Tenfold Brightness Enhancement and Emitted‐Light Spectral Tunability in Transparent Ambipolar Organic Light‐Emitting Transistor by Integration of High‐k Photonic Crystal

In organic light‐emitting transistors, the structural properties such as the in‐plane geometry and the lateral charge injection are the key elements that enable the monolithic integration of multiple electronic, optoelectronic, and photonic functions within the same device. Here, the realization of highly integrated multifunctional optoelectronic organic device is reported by introducing a high‐capacitance photonic crystal as a gate dielectric into a transparent single‐layer ambipolar organic light‐emitting transistor (OLET). By engineering the photonic crystal multistack and bandgap, it is showed that the integration of the photonic structure has a twofold effect on the optoelectronic performance of the device, i.e., i) to modulate the spectral profile and outcoupling of the emitted light and ii) to enhance the transistor source–drain current by a 25‐fold factor. Consequently, the photonic‐crystal‐integrated OLET shows an order of magnitude higher emitted power and brightness with respect to the corresponding polymer‐dielectric device, while presenting as‐designed electroluminescence spectral and spatial distribution. The results validate the efficacy of the proposed approach that is expected to unravel the technological potential for the realization of highly integrated optoelectronic smart systems based on organic light‐emitting transistors.     

High Performance p‐ and n‐Type Light‐Emitting Field‐Effect Transistors Employing Thermally Activated Delayed Fluorescence

Light‐emitting field‐effect transistors (LEFETs) are an emerging type of devices that combine light‐emitting properties with logical switching function. One of the factors limiting their efficiency stems from the spin statistics of electrically generated excitons. Only 25% of them, short lived singlet states, are capable of light emission, with the other 75% being long lived triplet states that are wasted as heat due to spin‐forbidden processes. Traditionally, the way to overcome this limitation is to use phosphorescent materials as additional emission channel harnessing the triplet excitons. Here, an alternative strategy for triplet usage in LEFETs in the form of thermally activated delayed fluorescence (TADF) is presented. Devices employing a TADF capable material, 4CzIPN (2,4,5,6‐tetra[9H‐carbazol‐9‐yl]isophthalonitrile), in both n‐type and p‐type configurations are shown. They manifest excellent electrical characteristics, consistent brightness in the range of 100–1,000 cd m^‐2 and external quantum efficiency (EQE) of up to 0.1%, which is comparable to the equivalent organic light‐emitting diode (OLED) based on the same materials. Simulation identifies the poor light out‐coupling as the main reason for lower than expected EQEs. Transmission measurements show it can be partially alleviated using a more transparent top contact, however more structural optimization is needed to tap the full potential of the device.     

Light‐Emitting Devices Based on Electrochemiluminescence Gels

Electrochemiluminescence (ECL) is a self‐emission of light from electrochemically excited luminophores via a series of redox reactions. Over the past decade, light‐emitting devices based on gel‐phase ECL active materials, i.e., gel electrolyte composites (referred to as ECL gels) containing an ECL luminophore, electrolyte, and network matrix, have attracted considerable attention as a complementary device platform to conventional electroluminescent devices for low‐cost printable displays and solid‐state light sources. Although the ECL phenomenon is extensively exploited in analytical diagnostics and sensing, the development of printable and fast‐response gel‐type luminescent materials may further expand the potential application of ECL in solid‐state flexible, bendable, and stretchable light‐emitting devices. This review summarizes the operation mechanisms of ECL‐based light‐emitting devices, ECL emitters and electrolytes, engineering strategies for obtaining printable high‐strength/high‐conductivity ECL gels, and emerging applications of gel‐type ECL devices.     

Cover Picture: An Organic Light‐Emitting Diode with Field‐Effect Electron Transport (Adv. Funct. Mater. 1/2008)

The cover shows an organic light‐emitting diode with remote metallic cathode, reported by Sarah Schols and co‐workers on p. 136. The metallic cathode is displaced from the light‐emission zone by one to several micrometers. The injected electrons accumulate at an organic heterojunction and are transported to the light‐emission zone by field‐effect. The achieved charge‐carrier mobility and in combination with reduced optical absorption losses because of the remoteness of the cathode may lead to applications as waveguide OLEDs and possibly a laser structure. (The result was obtained in the EU‐funded project “OLAS” IST‐ FP6‐015034.) We describe an organic light‐emitting diode (OLED) using field‐effect to transport electrons. The device is a hybrid between a diode and a field‐effect transistor. Compared to conventional OLEDs, the metallic cathode is displaced by one to several micrometers from the light‐emitting zone. This micrometer‐sized distance can be bridged by electrons with enhanced field‐effect mobility. The device is fabricated using poly(triarylamine) (PTAA) as the hole‐transport material, tris(8‐hydroxyquinoline) aluminum (Alq₃) doped with 4‐(dicyanomethylene)‐2‐methyl‐6‐(julolindin‐4‐yl‐vinyl)‐4H‐pyran (DCM₂) as the active light‐emitting layer, and N,N′‐ditridecylperylene‐3,4,9,10‐tetracarboxylic diimide (PTCDI‐C₁₃H₂₇), as the electron‐transport material. The obtained external quantum efficiencies are as high as for conventional OLEDs comprising the same materials. The quantum efficiencies of the new devices are remarkably independent of the current, up to current densities of more than 10 A cm^–2. In addition, the absence of a metallic cathode covering the light‐emission zone permits top‐emission and could reduce optical absorption losses in waveguide structures. These properties may be useful in the future for the fabrication of solid‐state high‐brightness organic light sources.     

Progress on Light‐Emitting Electrochemical Cells toward Blue Emission,High Efficiency,and Long Lifetime

Since their emergence in the 1990s, light‐emitting electrochemical cells (LECs) have attracted much attention due to their unique properties and potential for use as an alternative technology for illuminations and displays. After decades of development, however, the performance of LECs remains far from satisfactory for practical applications, in particular for those requiring blue light. Efforts have been made to develop of highly efficient blue‐emitting materials and more advanced device structures, aiming at realizing blueshifted emission, enhancing efficiency, and extending prolonged device lifetimes. A timely review into the current state of blue LECs is deemed imperative, as a full understanding of the molecular and device design strategy and identification of the major challenges that must be addressed to realize practical applications is necessary. A specific summary of recent progress on blue LECs is provided, with the focus placed on design strategies for blue emitters for LECs and device structures with respect to color tuning, efficiency enhancement, and stability improvement. Finally, the direction of development strategies in the future is suggested.     

Recent Advances in Optical Engineering of Light‐Emitting Electrochemical Cells

Since the first demonstration of light‐emitting electrochemical cells (LECs) in 1995, much effort has been made to develop this technology for display and lighting. A common LEC generally contains a single emissive layer blended with a salt, which provides mobile ions under a bias. Ions accumulated at electrodes facilitate electrochemical doping such that operation voltage is low even when employing high‐work‐function inert electrodes. The superior properties of simple device architecture, low‐voltage operation, and compatibility with inert metal electrode render LECs suitable for cost‐effective light‐emitting sources. In addition to enormous progress in developing novel emissive materials for LECs, optical engineering has been shown to improve device performance of LECs in an alternative way. Light outcoupling enhancement technologies recycle the trapped light and increase the light output from LECs. Techniques to estimate emission zone position provide a powerful tool to study carrier balance of LECs and to optimize device performance. Spectral tailoring of the output emission from LECs based on microcavity effect and localized surface plasmon resonance of metal nanoparticles improves the intrinsic emission properties of emissive materials by optical means. These reported optical techniques are overviewed in this review.     

Solution‐Processed Zinc Oxide as High‐Performance Air‐Stable Electron Injector in Organic Ambipolar Light‐Emitting Field‐Effect Transistors

Electron injection from the source–drain electrodes limits the performance of many n‐type organic field‐effect transistors (OFETs), particularly those based on organic semiconductors with electron affinities less than 3.5 eV. Here, it is shown that modification of gold source–drain electrodes with an overlying solution‐deposited, patterned layer of an n‐type metal oxide such as zinc oxide (ZnO) provides an efficient electron‐injecting contact, which avoids the use of unstable low‐work‐function metals and is compatible with high‐resolution patterning techniques such as photolithography. Ambipolar light‐emitting field‐effect transistors (LEFETs) based on green‐light‐emitting poly(9,9‐dioctylfluorene‐alt‐benzothiadiazole) (F8BT) and blue‐light‐emitting poly(9,9‐dioctylfluorene) (F8) with electron‐injecting gold/ZnO and hole‐injecting gold electrodes show significantly lower electron threshold voltages and several orders of magnitude higher ambipolar currents, and hence light emission intensities, than devices with bare gold electrodes. Moreover, different solution‐deposited metal oxide injection layers are compared. By spin‐coating ZnO from a low‐temperature precursor, processing temperatures could be reduced to 150 °C. Ultraviolet photoemission spectroscopy (UPS) shows that the improvement in transistor performance is due to reduction of the electron injection barrier at the interface between the organic semiconductor and ZnO/Au compared to bare gold electrodes.     

Organic–Inorganic Perovskite Light‐Emitting Electrochemical Cells with a Large Capacitance

While perovskite light‐emitting diodes typically made with high work function anodes and low work function cathodes have recently gained intense interests. Perovskite light‐emitting devices with two high work function electrodes with interesting features are demonstrated here. Firstly, electroluminescence can be easily obtained from both forward and reverse biases. Secondly, the results of impedance spectroscopy indicate that the ionic conductivity in the iodide perovskite (CH₃NH₃PbI₃) is large with a value of ≈10^?8 S cm^?1. Thirdly, the shift of the emission spectrum in the mixed halide perovskite (CH₃NH₃PbI_3?xBr_x) light‐emitting devices indicates that I^? ions are mobile in the perovskites. Fourthly, this work shows that the accumulated ions at the interfaces result in a large capacitance (≈100 μF cm^?2). The above results conclusively prove that the organic–inorganic halide perovskites are solid electrolytes with mixed ionic and electronic conductivity and the light‐emitting device is a light‐emitting electrochemical cell. The work also suggests that the organic–inorganic halide perovskites are potential energy‐storage materials, which may be applicable in the field of solid‐state supercapacitors and batteries.     

Fundamentals of Materials Selection for Light‐Emitting Electrochemical Cells

The in situ formation of a light‐emitting p–n or p–i–n junction in light‐emitting electrochemical cells (LECs) necessitates mixed ionic–electronic conductors in the active layer. This unique characteristic requires electronic, luminescent, and ionic ingredients that work synergistically in the LECs. The material requirements that lead to promising electroluminescent properties are discussed and the important components reported so far are surveyed. Particular attention is paid to the working mechanisms behind junction formation and stabilization to create efficient and stable electroluminescence in conjugated‐polymer‐based LECs. Keeping these fundamentals in mind explains how LEC devices have evolved from classic conjugated polymer blends into highly stable crosslinked, hybrid composite, and stretchable device architectures. To conclude, a future development strategy is proposed based on a dual approach: develop new materials specifically for LEC devices and explore novel ways to efficiently process and stabilize the p–i–n junction, which will drive improvements in both LEC external quantum efficiency and operating lifetime toward truly low‐cost solid‐state lighting applications.     

Recent Progress in White Light‐Emitting Electrochemical Cells

Solid‐state white light‐emitting electrochemical cells (LECs) exhibit the following advantages: simple device structures, low operation voltage, and compatibility with inert metal electrodes. LECs have been studied extensively since the first demonstration of white LECs in 1997, due to their potential application in solid‐state lighting. This review provides an overview of recent developments in white LECs, specifically three major aspects thereof, namely, host–guest white LECs, nondoped white LECs, and device engineering of white LECs. Host–guest strategy is widely used in white LECs. Host materials are classified into ionic transition metal complexes, conjugated polymers, and small molecules. Nondoped white LECs are based on intra‐ or intermolecular interactions of emissive and multichromophore materials. New device engineering techniques, such as modifying carrier balance, color downconversion, optical filtering based on microcavity effect and localized surface plasmon resonance, light extraction enhancement, adjusting correlated color temperature of the output electroluminescence spectrum, tandem and/or hybrid devices combining LECs with organic light‐emitting diodes, and quantum‐dot light‐emitting diodes improve the device performance of white LECs by ways other than material‐oriented approaches. Considering the results of the reviewed studies, white LECs have a bright outlook.     

Two‐Component Molecular Materials of 2,5‐Diphenyloxazole Exhibiting Tunable Ultraviolet/Blue Polarized Emission,Pump‐enhanced Luminescence,and Mechanochromic Response

The development of π‐conjugated molecular systems with high‐efficiency generation of UV and blue light plays an important role in the fields of light‐emitting diodes, fluorescent imaging, and information storage. Herein, supramolecular construction of solid‐state UV/blue luminescent materials are assembled using 2,5‐diphenyloxazole (DPO) with four typical co‐assembled building blocks (1,4‐diiodotetrafluorobenzene, 4‐bromotetrafluorobenzene carboxylic acid, pentafluorophenol, and octafluoronaphthalene). Compared with the pristine DPO sample, the as‐prepared two‐component molecular materials feature ease of crystallization, high crystallinity, enhanced thermal stability and tunable luminescence properties (such as emissive wavelength, color, fluorescence lifetime, and photoluminescence quantum yield) as well as multicolor polarized emission in the UV/blue region. Moreover, pump‐enhanced luminescence and reversible mechanochromic fluorescence (MCF) properties can also be obtained for these molecular solids, which are absent for the pristine DPO sample. Therefore, this work provides a procedure for the facile self‐assembly of ordered two‐component molecular materials with tunable UV/blue luminescence properties, which have potential application in the areas of light‐emitting displays, polarized emission, frequency doubling, and luminescent sensors.     

Merging Biology and Solid‐State Lighting: Recent Advances in Light‐Emitting Diodes Based on Biological Materials

Solid‐state lighting (SSL) is one of the biggest achievements of the 20^th century. It has completely changed our modern life with respect to general illumination (light‐emitting diodes), flat devices and displays (organic light‐emitting diodes), and small labeling systems (light‐emitting electrochemical cells). Nowadays, it is however mandatory to make a transition toward green, sustainable, and equally performing lighting systems. In this regard, several groups have realized that the actual SSL technologies can easily and efficiently be improved by getting inspiration from how natural systems that manipulate light have been optimized over millennia. In addition, various natural and biocompatible materials with suitable properties for lighting applications have been used to replace expensive and unsustainable components of current lighting devices. Finally, SSL has also started to revolutionize the biomedical field with the achievement of efficient implantable lighting systems. Herein, the‐state‐of‐art of (i) biological materials for lighting devices, (ii) bioinspired concepts for device designs, and (iii) implantable SSL technologies is summarized, highlighting the perspectives of these emerging fields.     

Monothiatruxene‐Based,Solution‐Processed Green,Sky‐Blue,and Deep‐Blue Organic Light‐Emitting Diodes with Efficiencies Beyond 5% Limit

The development of blue materials with good efficiency, even at high brightness, with excellent color purity, simple processing, and high thermal stability assuring adequate device lifetime is an important remaining challenge for organic light‐emitting didoes (OLEDs) in displays and lightning applications. Furthermore, these various features are typically mutually exclusive in practice. Herein, four novel green and blue light‐emitting materials based on a monothiatruxene core are reported together with their photophysical and thermal properties, and performance in solution‐processed OLEDs. The materials show excellent thermal properties with high glass transition temperatures ranging from 171 to 336 °C and decomposition temperatures from 352 to 442 °C. High external quantum efficiencies of 3.7% for a deep‐blue emitter with CIE color co‐ordinates (0.16, 0.09) and 7% for green emitter with color co‐ordinates (0.22, 0.40) are achieved at 100 cd m^?2. The efficiencies observed are exceptionally high for fluorescent materials with photoluminescence quantum yields of 24% and 62%, respectively. The performance at higher brightness is very good with only 38% and 17% efficiency roll‐offs at 1000 cd m^?2. The results indicate that utilization of this unique molecular design is promising for efficient deep‐blue highly stable and soluble light‐emitting materials.