Bonding Strength Regulates Anchoring-Based Self-Assembly Monolayers for Efficient and Stable Perovskite Solar Cells

Anchoring-based self-assembly (ASA) has emerged as a material-saving and highly scalable strategy to fabricate charge-transporting monolayers for perovskite solar cells (PSCs). However, the interfacial hole-extraction and electron-blocking performances are highly dependent on the compactness of the ASA monolayers, which has been largely ignored though it is very crucial to the efficiency and stability of PSCs. Here, strategically designed hole-transporting molecules with different anchoring groups are incorporated to investigate the effect of bonding strength on monolayer quality and correlate these with the performance of p-i-n structured PSCs. It is unraveled that the anchoring groups with a stronger bonding strength are advantageous for improving the assembly rate, density, and compactness of ASA monolayer, thus enhancing charge collection and suppressing interfacial recombination. The prototypical PSCs based on optimal ASA monolayer achieve a high power conversion efficiency (PCE) of 21.43% (0.09 cm²). More encouragingly, when enlarging the device area by tenfold, a comparable PCE of 20.09% (1.0 cm²) can be obtained, suggesting that the ASA strategy is practically useful for scaling-up. The robust anchoring of the ASA monolayer also enhances devices stability, retaining 90% of initial PCE after three months. This study provides important insights into the ASA charge-transporting monolayers for efficient and stable PSCs.     

Hole‐Transporting Materials Incorporating Carbazole into Spiro‐Core for Highly Efficient Perovskite Solar Cells

Hole‐transporting materials (HTMs) play a significant role in hole transport and extraction for perovskite solar cells (PeSCs). As an important type of HTMs, the spiro‐architecture‐based material is widely used as small organic HTM in PeSCs with good photovoltaic performances. The skeletal modification of spiro‐based HTMs is a critical way of modifying energy level and hole mobility. Thus, many spiro alternatives are developed to optimize the spiro‐type HTMs. Herein, a novel carbazole‐based single‐spiro‐HTM named SCZF‐5 is designed and prepared for efficient PeSCs. In addition, another single‐spiro HTM SAF‐5 with reported 10‐phenyl‐10H‐spiro[acridine‐9,9′‐fluorene] (SAF) core is also synthesized for comparison. Through varying from SAF core to SCZF core as well as comparing with the classic 9,9′‐spiro‐bifluorene, it is found that the new HTM SCZF‐5 exhibits more impressive power conversion efficiency (PCE) of 20.10% than SAF‐5 (13.93%) and the commercial HTM spiro‐OMeTAD (19.11%). On the other hand, the SCZF‐5‐based device also has better durability in lifetime testing, indicating the newly designed SCZF by integrating carbazole into the spiro concept has good potential for developing effective HTMs.     

A Review on Scaling Up Perovskite Solar Cells

Power conversion efficiency of perovskite solar cells (PSCs) has been boosted to 25.5% among the highest efficiency for single-junction solar cells, making PSCs extremely promising to realize industrial production and commercialization. Scaling up PSCs to fabricate efficient perovskite solar modules (PSMs) is the fundamental for applications. Here, present progresses on scaling up PSCs are reviewed. The structure design for PSMs is discussed. Various scalable methods and related morphology control strategies for large-area uniform perovskite films are summarized. Potential charge transport materials and electrode materials together with their scalable methods for low-cost, efficient, and stable PSMs are also summarized. Besides, current attempts on encapsulation for improving stability and reducing lead leakage are introduced, and the calculated cost and environment influence of PSMs are also outlined.     

Polyfluorene Derivatives are High‐Performance Organic Hole‐Transporting Materials for Inorganic−Organic Hybrid Perovskite Solar Cells

Photovoltaics based on organic?inorganic perovskites offer new promise to address the contemporary energy and environmental issues. These solar cells have so far largely relied on small‐molecule hole transport materials such as spiro‐OMeTAD, which commonly suffer from high cost and low mobility. In principle, polyfluorene copolymers can be an ideal alternative to spiro‐OMeTAD, given their low price, high hole mobility and good processability, but this potential has not been explored. Herein, polyfluorene derived polymers‐TFB and PFB, which contain fluorine and arylamine groups, are demonstrated and can indeed rival or even outperform spiro‐OMeTAD as efficient hole‐conducting materials for perovskite solar cells. In particular, under the one‐step perovskite deposition condition, TFB achieves a 10.92% power conversion efficiency that is considerably higher than that with spiro‐OMeTAD (9.78%), while using the two‐step perovskite deposition method, about 13% efficient solar cells with TFB (12.80%) and spiro‐OMeTAD (13.58%) are delivered. Photo­luminescence reveals the efficient hole extraction and diffusion at the interface between CH₃NH₃PbI₃ and the hole conducting polymer. Impedance spectroscopy uncovers the higher electrical conductivity and lower series resistance than spiro‐OMeTAD, accounting for the significantly higher fill factor, photocurrent and open‐circuit voltage of the TFB‐derived cells than with spiro‐MeOTAD.     

Heteroatom Effect on Star‐Shaped Hole‐Transporting Materials for Perovskite Solar Cells

Three new star‐shaped hole‐transporting materials (HTMs) incorporating benzotripyrrole, benzotrifuran, and benzotriselenophene central cores endowed with three‐armed triphenylamine moieties ( BTP‐1 , BTF‐1 , and BTSe‐1 , respectively) are designed, synthesized, and implemented in perovskite solar cells (PSCs). The impact that the heteroatom‐containing central scaffold has on the electrochemical and photophysical properties, as well as on the photovoltaic performance, is systematically investigated and compared with their sulfur‐rich analogue ( BTT‐3 ). The new HTMs exhibit suitable highest‐occupied molecular orbitals (HOMO) levels regarding the valence band of the perovskite, which ensure efficient hole extraction at the perovskite/HTM interface. The molecular structures of BTF‐1 , BTT‐3 , and BTSe‐1 are fully elucidated by single‐crystal X‐ray crystallography as toluene solvates. The optimized (FAPbI₃)_0.85(MAPbBr₃)_0.15‐based perovskite solar cells employing the tailor‐made, chalcogenide‐based HTMs exhibit remarkable power conversion efficiencies up to 18.5%, which are comparable to the devices based on the benchmark spiro‐OMeTAD. PSCs with BTP‐1 exhibit a more limited power conversion efficiency of 15.5%, with noticeable hysteresis. This systematic study indicates that chalcogenide‐based derivatives are promising HTM candidates to compete efficiently with spiro‐OMeTAD.     

Solution‐Processable Perovskite Solar Cells toward Commercialization: Progress and Challenges

In the last few years, organometal halide perovskites (OHPs) have emerged as a promising candidate for photovoltaic (PV) applications. A certified efficiency as high as 23.7% has been achieved, which is comparable with most of the well‐established PV technologies. Their good solubility due to the ionic nature enables versatile low‐temperature solution processes, including blade coating, slot‐die coating, etc., most of which are scalable and compatible with roll‐to‐roll large‐scale manufacturing processes. The low cost, high efficiency, and facile processable features make perovskite solar cells (PSCs) a very competitive PV technology. Despite the great progress, long‐term durability concerns, toxicity issues of both materials and manufacturing process, and lack of robust high‐throughput production technology for fabricating efficient large‐area modules are major obstacles toward commercialization. In this review, the recent progress of commercially available process of PSCs is surveyed, the underlying determinants for upscaling high‐quality PSCs from hydrodynamic characteristics and crystallization thermodynamic mechanism are identified, the influence of external stress factors on stability of PSCs and intrinsic instability mechanism in OHPs themselves is revealed, and the environmental impact and sustainable development of PSC technology are analyzed. Strategies and opportunities for large‐scale production of PSCs are suggested to promote the development of PSCs toward commercialization.     

Side‐Chain Engineering on Dopant‐Free Hole‐Transporting Polymers toward Highly Efficient Perovskite Solar Cells (20.19%)

A variety of dopant‐free hole‐transporting materials (HTMs) is developed to serve as alternatives to the typical dopant‐treated ones; however, their photovoltaic performance still falls far behind. In this work, the side chain of a polymeric HTM is engineered by partially introducing diethylene glycol (DEG) groups in order to simultaneously optimize the properties of both the bulk of the HTM layer and the HTM/perovskite interface. The intermolecular π–π stacking interaction in the HTM layer is unexpectedly weakened after the incorporation of DEG groups, whereas the lamellar packing interaction is strengthened. A doubled hole mobility is obtained when 3% of the DEG groups replace the original alkyl side chains, and a champion power conversion efficiency (PCE) of 20.19% (certified: 20.10%) is then achieved, which is the first report of values over 20% for dopant‐free organic HTMs. The device maintains 92.25% of its initial PCE after storing at ambient atmosphere for 30 d, which should be due to the enhanced hydrophobicity of the HTM film.     

Benzodithiophene Hole‐Transporting Materials for Efficient Tin‐Based Perovskite Solar Cells

Developing efficient interfacial hole transporting materials (HTMs) is crucial for achieving high‐performance Pb‐free Sn‐based halide perovskite solar cells (PSCs). Here, a new series of benzodithiophene (BDT)‐based organic small molecules containing tetra‐ and di‐triphenyl amine donors prepared via a straightforward and scalable synthetic route is reported. The thermal, optical, and electrochemical properties of two BDT‐based molecules are shown to be structurally and energetically suitable to serve as HTMs for Sn‐based PSCs. It is reported here that ethylenediammonium/formamidinium tin iodide solar cells using BDT‐based HTMs deliver a champion power conversion efficiency up to 7.59%, outperforming analogous reference solar cells using traditional and expensive HTMs. Thus, these BDT‐based molecules are promising candidates as HTMs for the fabrication of high‐performance Sn‐based PSCs.     

Improving Performance of Perovskite Solar Cells Using [7]Helicenes with Stable Partial Biradical Characters as the Hole‐Extraction Layers

Organic–inorganic hybrid perovskites have realized a high power conversion efficiency (PCE) in both n–i–p and p–i–n device configurations. However, since the p–i–n structure exempts the sophisticated processing of charge‐transporting layers, it seems to possess better potential for practical applications than the n–i–p one. Currently, the inorganic NiO_x is the most prevailing hole‐transporting layer (HTL) used in p–i–n perovskite solar cells. Nevertheless, defects might exist on its surface to influence the charge transfer/extraction across the interface with perovskite and to affect the quality of the perovskite film grown on it. Herein, two novel [7]helicenes with stable open‐shell singlet biradical ground states at room temperature are demonstrated as an effective surface modifier of the NiO_x HTL. Their nonpolar feature effectively promotes the crystallinity of the perovskite film grown on them; meanwhile, their unique partial biradical character seems to provide a certain degree of defect passivation function at the perovskite interface to facilitate interfacial charge transfer/extraction. As a result, both 1ab‐ and 1bb‐modifed devices yield a PCE of >18%, exceeding the value (15.6%) of the control device using a sole NiO_x HTL, and the maximum PCE can reach 19%. Detailed characterizations are carefully conducted to understand the underlying reasons behind such enhancement.     

Self‐Crystallized Multifunctional 2D Perovskite for Efficient and Stable Perovskite Solar Cells

Recently, perovskite solar cells (PSC) with high power‐conversion efficiency (PCE) and long‐term stability have been achieved by employing 2D perovskite layers on 3D perovskite light absorbers. However, in‐depth studies on the material and the interface between the two perovskite layers are still required to understand the role of the 2D perovskite in PSCs. Self‐crystallization of 2D perovskite is successfully induced by deposition of benzyl ammonium iodide (BnAI) on top of a 3D perovskite light absorber. The self‐crystallized 2D perovskite can perform a multifunctional role in facilitating hole transfer, owing to its random crystalline orientation and passivating traps in the 3D perovskite. The use of the multifunctional 2D perovskite (M2P) leads to improvement in PCE and long‐term stability of PSCs both with and without organic hole transporting material (HTM), 2,2′,7,7′‐tetrakis‐(N,N‐di‐p‐methoxyphenyl‐amine)‐9,9′‐spirobifluorene (spiro‐OMeTAD) compared to the devices without the M2P.     

Dopant‐Free Spiro‐Triphenylamine/Fluorene as Hole‐Transporting Material for Perovskite Solar Cells with Enhanced Efficiency and Stability

Chemical doping is often used to enhance electric conductivity of the conjugated molecule as hole‐transporting material (HTM) for the application in optoelectronics. However, chemical dopants can promote ion migration at the electrical field, which deteriorates the device efficiency as well as increases the fabrication cost. Here, two star HTMs, namely 2,2′,7,7′‐tetrakis(N,N‐di‐p‐methoxyphenyl‐amine) 9,9′‐spirobifluorene (Spiro‐OMeTAD) and poly(triarylamine) are subjeted to chemical combination to yield dopant‐free N2,N2,N2′,N2′,N7,N7,N7′,N7′‐octakis(4‐methoxyphenyl)‐10‐phenyl‐10H‐spiro[acridine‐9,9′‐fluorene]‐2,2′,7,7′‐tetraamine (SAF‐OMe). The power conversion efficiencies (PCEs) of 12.39% achieved by solar cells based on pristine, dopant‐free SAF‐OMe are among the highest reported for perovskite solar cells and are even comparable to devices based on chemically doped Spiro‐OMeTAD (14.84%). Moreover, using a HTM comprised of SAF‐OMe with an additional dopant results in a record PCE of 16.73%. Compared to Spiro‐OMeTAD‐based devices, SAF‐OMe significantly improves stability.     

Improving Performance and Stability of Flexible Planar‐Heterojunction Perovskite Solar Cells Using Polymeric Hole‐Transport Material

For realizing flexible perovskite solar cells (PSCs), it is important to develop low‐temperature processable interlayer materials with excellent charge transporting properties. Herein, a novel polymeric hole‐transport material based on 1,4‐bis(4‐sulfonatobutoxy)benzene and thiophene moieties (PhNa‐1T) and its application as a hole‐transport layer (HTL) material of high‐performance inverted‐type flexible PSCs are introduced. Compared with the conventionally used poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), the incorporation of PhNa‐1T into HTL of the PSC device is demonstrated to be more effective for improving charge extraction from the perovskite absorber to the HTL and suppressing charge recombination in the bulk perovskite and HTL/perovskite interface. As a result, the flexible PSC using PhNa‐1T achieves high photovoltaic performances with an impressive power conversion efficiency of 14.7%. This is, to the best of our knowledge, among the highest performances reported to date for inverted‐type flexible PSCs. Moreover, the PhNa‐1T‐based flexible PSC shows much improved stability under an ambient condition than PEDOT:PSS‐based PSC. It is believed that PhNa‐1T is a promising candidate as an HTL material for high‐performance flexible PSCs.     

Achieving 20% Efficiency for Low‐Temperature‐Processed Inverted Perovskite Solar Cells

Low‐temperature‐processed inverted perovskite solar cells (PVSCs) attract increasing attention because they can be fabricated on both rigid and flexible substrates. For these devices, hole‐transporting layers (HTLs) play an important role in achieving efficient and stable inverted PVSCs by adjusting the anodic work function, hole extraction, and interfacial charge recombination. Here, the use of a low‐temperature (≤150 °C) solution‐processed ultrathin film of poly[(9,9‐dioctyl‐fluorenyl‐2,7‐diyl)‐co‐(4,4′‐(N‐(4‐secbutylphenyl) diphenylamine)] (TFB) is reported as an HTL in one‐step‐processed CH₃NH₃PbI₃ (MAPbI₃)‐based inverted PVSCs. The fabricated device exhibits power conversion efficiency (PCE) as high as 20.2% when measured under AM 1.5 G illumination. This PCE makes them one of the MAPbI₃‐based inverted PVSCs that have the highest efficiency reported to date. Moreover, this inverted PVSC also shows good stability, which can retain 90% of its original efficiency after 30 days of storage in ambient air.     

Carbon Counter Electrodes in Dye‐Sensitized and Perovskite Solar Cells

Developing highly effective and stable counter electrode (CE) materials to replace rare and expensive noble metals for dye‐sensitized and perovskite solar cells (DSC and PSC) is a research hotspot. Carbon materials are identified as the most qualified noble metal‐free CEs for the commercialization of the two photovoltaic devices due to their merits of low cost, excellent activity, and superior stability. Herein, carbonaceous CE materials are reviewed extensively with respect to the two devices. For DSC, a classified discussion according to the morphology is presented because electrode properties are closely related to the specific porosity or nanostructure of carbon materials. The pivotal factors influencing the catalytic behavior of carbon CEs are also discussed. For PSC, an overview of the new carbon CE materials is addressed comprehensively. Moreover, the modification techniques to improve the interfacial contact between the perovskite and carbon layers, aiming to enhance the photovoltaic performance, are also demonstrated. Finally, the development directions, main challenges, and coping approaches with respect to the carbon CE in DSC and PSC are stated.     

Copper(I) Thiocyanate (CuSCN) Hole‐Transport Layers Processed from Aqueous Precursor Solutions and Their Application in Thin‐Film Transistors and Highly Efficient Organic and Organometal Halide Perovskite Solar Cells

This study reports the development of copper(I) thiocyanate (CuSCN) hole‐transport layers (HTLs) processed from aqueous ammonia as a novel alternative to conventional n‐alkyl sulfide solvents. Wide bandgap (3.4–3.9 eV) and ultrathin (3–5 nm) layers of CuSCN are formed when the aqueous CuSCN–ammine complex solution is spin‐cast in air and annealed at 100 °C. X‐ray photoelectron spectroscopy confirms the high compositional purity of the formed CuSCN layers, while the high‐resolution valence band spectra agree with first‐principles calculations. Study of the hole‐transport properties using field‐effect transistor measurements reveals that the aqueous‐processed CuSCN layers exhibit a fivefold higher hole mobility than films processed from diethyl sulfide solutions with the maximum values approaching 0.1 cm² V^?1 s^?1. A further interesting characteristic is the low surface roughness of the resulting CuSCN layers, which in the case of solar cells helps to planarize the indium tin oxide anode. Organic bulk heterojunction and planar organometal halide perovskite solar cells based on aqueous‐processed CuSCN HTLs yield power conversion efficiency of 10.7% and 17.5%, respectively. Importantly, aqueous‐processed CuSCN‐based cells consistently outperform devices based on poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate HTLs. This is the first report on CuSCN films and devices processed via an aqueous‐based synthetic route that is compatible with high‐throughput manufacturing and paves the way for further developments.     

Synergistic Toughening and Self-Healing Strategy for Highly Efficient and Stable Flexible Perovskite Solar Cells

Halide perovskites are qualified to meet the flexibility demands of optoelectronic field because of their merits of flexibility, lightness, and low cost. However, the intrinsic defects and deformation-induced ductile fracture in both perovskite and buried interface significantly restrict the photoelectric performance and longevity of flexible perovskite solar cells (PVSCs). Here, a dual-dynamic cross-linking network is schemed to boost the photovoltaic efficiency and mechanical stability of flexible PVSCs by incorporating natural polymerizable small molecule α-lipoic acid (LA). The LA therein can be autonomously ring-opening polymerized through dynamic disulfide bonds and hydrogen bonds, concurrently forming coordination bonds to interact with perovskite component. Importantly, the polymerization product can serve as efficacious passivating and toughening agents to simultaneously optimize interfacial contact, enhance perovskite crystallinity and sustain robust mechanical bendability. Subsequently, the rigid (or flexible) p-i-n device realizes a champion efficiency of 22.43% (or 19.03%) with prominent operational stability. Moreover, the dual-dynamic cross-linking network endows PVSCs with bendability and self-healing capacity, allowing the optimized devices to retain >80% efficiency after 3000 bending cycles, and subsequently restore to ≈95% of its initial efficiency under mild heat-treatment. This toughening and self-healing strategy provides a facile and efficient path to prolong operational lifetime of flexible device.     

Water‐Soluble Triazolium Ionic‐Liquid‐Induced Surface Self‐Assembly to Enhance the Stability and Efficiency of Perovskite Solar Cells

Despite being a promising candidate for next‐generation photovoltaics, perovskite solar cells (PSCs) exhibit limited stability that hinders their practical application. In order to improve the humidity stability of PSCs, herein, a series of ionic liquids (ILs) “1‐alkyl‐4‐amino‐1,2,4‐triazolium” (termed as RATZ; R represents alkyl chain, and ATZ represents 4‐amino‐1,2,4‐triazolium) as cations are designed and used as additives in methylammonium lead iodide (MAPbI₃) perovskite precursor solution, obtaining triazolium ILs‐modified PSCs for the first time (termed as MA/RATZ PSCs). As opposed to from traditional methods that seek to improve the stability of PSCs by functionalizing perovskite film with hydrophobic molecules, humidity‐stable perovskite films are prepared by exploiting the self‐assembled monolayer (SAM) formation of water‐soluble triazolium ILs on a hydrophilic perovskite surface. The mechanism is validated by experimental and theoretical calculation. This strategy means that the MA/RATZ devices exhibit good humidity stability, maintaining around 80% initial efficiency for 3500 h under 40 ± 5% relative humidity. Meanwhile, the MA/RATZ PSCs exhibit enhanced thermal stability and photostability. Tuning the molecule structure of the ILs additives achieves a maximum power conversion efficiency (PCE) of 20.03%. This work demonstrates the potential of using triazolium ILs as additives and SAM and molecular design to achieve high performance PSCs.     

Multifunctional Enhancement for Highly Stable and Efficient Perovskite Solar Cells

With a certified efficiency as high as 25.2%, perovskite has taken the crown as the highest efficiency thin film solar cell material. Unfortunately, serious instability issues must be resolved before perovskite solar cells (PSCs) are commercialized. Aided by theoretical calculation, an appropriate multifunctional molecule, 2,2-difluoropropanediamide (DFPDA), is selected to ameliorate all the instability issues. Specifically, the carbonyl groups in DFPDA form chemical bonds with Pb²⁺ and passivate under-coordinated Pb²⁺ defects. Consequently, the perovskite crystallization rate is reduced and high-quality films are produced with fewer defects. The amino groups not only bind with iodide to suppress ion migration but also increase the electron density on the carbonyl groups to further enhance their passivation effect. Furthermore, the fluorine groups in DFPDA form both an effective barrier on the perovskite to improve its moisture stability and a bridge between the perovskite and HTL for effective charge transport. In addition, they show an effective doping effect in the HTL to improve its carrier mobility. With the help of the combined effects of these groups in DFPDA, the PSCs with DFPDA additive achieve a champion efficiency of 22.21% and a substantially improved stability against moisture, heat, and light.