MoS2/Si Heterojunction with Vertically Standing Layered Structure for Ultrafast,High‐Detectivity,Self‐Driven Visible–Near Infrared Photodetectors

As an interesting layered material, molybdenum disulfide (MoS₂) has been extensively studied in recent years due to its exciting properties. However, the applications of MoS₂ in optoelectronic devices are impeded by the lack of high‐quality p–n junction, low light absorption for mono‐/multilayers, and the difficulty for large‐scale monolayer growth. Here, it is demonstrated that MoS₂ films with vertically standing layered structure can be deposited on silicon substrate with a scalable sputtering method, forming the heterojunction‐type photodetectors. Molecular layers of the MoS₂ films are perpendicular to the substrate, offering high‐speed paths for the separation and transportation of photo‐generated carriers. Owing to the strong light absorption of the relatively thick MoS₂ film and the unique vertically standing layered structure, MoS₂/Si heterojunction photodetectors with unprecedented performance are actualized. The self‐driven MoS₂/Si heterojunction photodetector is sensitive to a broadband wavelength from visible light to near‐infrared light, showing an extremely high detectivity up to ≈10¹³ Jones (Jones = cm Hz^1/2 W^?1), and an ultrafast response speed of ≈3 μs. The performance is significantly better than the photodetectors based on mono‐/multilayer MoS₂ nanosheets. Additionally, the MoS₂/Si photodetectors exhibit excellent stability in air for a month. This work unveils the great potential of MoS₂/Si heterojunction for optoelectronic applications.     

Carrier Modulation of Ambipolar Few‐Layer MoTe2 Transistors by MgO Surface Charge Transfer Doping

Semiconducting molybdenum ditelluride (2H‐MoTe₂), a fast‐emerging 2D material with an appropriate band gap and decent carrier mobility, is configured as field‐effect transistors and is the focus of substantial research interest, showing hole‐dominated ambipolar characteristics. Here, carrier modulation of ambipolar few‐layer MoTe₂ transistors is demonstrated utilizing magnesium oxide (MgO) surface charge transfer doping. By carefully adjusting the thickness of MgO film and the number of MoTe₂ layers, the carrier polarity of MoTe₂ transistors from p‐type to n‐type can be reversely controlled. The electron mobility of MoTe₂ is significantly enhanced from 0.1 to 20 cm² V^?1 s^?1 after 37 nm MgO film doping, indicating a greatly improved electron transport. The effective carrier modulation enables to achieve high‐performance complementary inverters with high DC gain of >25 and photodetectors based on few‐layer MoTe₂ flakes. The results present an important advance toward the realization of electronic and optoelectronic devices based on 2D transition‐metal dichalcogenide semiconductors.     

All‐Layered 2D Optoelectronics: A High‐Performance UV–vis–NIR Broadband SnSe Photodetector with Bi2Te3 Topological Insulator Electrodes

Nanoelectronics is in urgent demand of exceptional device architecture with ultrathin thickness below 10 nm and dangling‐bond‐free surface to break through current physical bottleneck and achieve new record of integration level. The advance in 2D van der Waals materials endows scientists with new accessibility. This study reports an all‐layered 2D Bi₂Te₃‐SnSe‐Bi₂Te₃ photodetector, and the broadband photoresponse of the device from ultraviolet (370 nm) to near‐infrared (808 nm) is demonstrated. In addition, the optimized responsivity reaches 5.5 A W^?1, with the corresponding eternal quantum efficiency of 1833% and detectivity of 6 × 10¹⁰ cm Hz^1/2 W^?1. These figures‐of‐merits are among the best values of the reported all‐layered 2D photodetectors, which are several orders of magnitude higher than those of the previous SnSe photodetectors. The superior device performance is attributed to the synergy of highly conductive surface state of Bi₂Te₃ topological insulator, perfect band alignment between Bi₂Te₃ and SnSe as well as small interface potential fluctuation. Meanwhile, the all‐layered 2D device is further constructed onto flexible mica substrate and its photoresponse is maintained roughly unchanged upon 60 bending cycles. The findings represent a fundamental scenario for advancement of the next generation high performance and high integration level flexible optoelectronics.     

Inversion Symmetry Broken 2D 3R‐MoTe2

Inversion symmetry broken 3R phase semiconducting transition metal dichalcogenides (TMDC) have huge potential applications in many novel fields, such as valleytronics and nonlinear optics for the strong spin–orbit coupling and particularly the persistent noncentrosymmetric structure regardless the layer numbers, in stark contrast to the strict layer number requirement in other phases. Unfortunately, the fabrication of 3R phase TMDC is still a huge task to date. Molybdenum telluride (MoTe₂) attracts increasing interest in recent years due to the easy transition between its various phases and its narrow bandgap close to silicon. However, the weak Mo–Te bond and the small energy imparity among phases make it a big challenge to obtain pure‐phase single crystalline MoTe₂, especially; it is still a virgin land to obtain two‐dimensional (2D) 3R‐MoTe₂. Here, by rational controlling the deposition temperature and tellurization velocity, for the first time high quality 2D 3R‐MoTe₂ flakes are synthesized via chemical vapor deposition from a MoCl₅ precursor. Scanning transmission electron microscopy unambiguously reveals the 3R stacking mode of as‐synthesized MoTe₂. Second harmonic generation measurement confirms the excellent odd/even layer‐independent frequency conversion efficiency. Besides, the outstanding intrinsic infrared detection ability of as‐synthesized 3R‐MoTe₂ is demonstrated as well.     

Flexible and Self‐Powered Lateral Photodetector Based on Inorganic Perovskite CsPbI3–CsPbBr3 Heterojunction Nanowire Array

Self‐powered perovskite photodetectors mainly adopt the vertical heterojunction structure composed of active layer, electron–hole transfer layers, and electrodes, which results in the loss of incident light and interfacial accumulation of defects. To address these issues, a self‐powered lateral photodetector based on CsPbI₃–CsPbBr₃ heterojunction nanowire arrays is designed on both a rigid glass and a flexible polyethylene naphthalate substrate using an in situ conversion and mask‐assisted electrode fabrication method. Through adding the polyvinyl pyrrolidone and optimizing the concentration of precursors under the pressure‐assisted moulding process, both the crystallinity and stability of perovskite nanowire array are improved. The nanowire array–based lateral device shows a high responsivity of 125 mA W^?1 and a fast rise and decay time of 0.7 and 0.8 ms under a self‐powered operation condition. This work provides a new strategy to fabricate perovskite heterojunction nanoarrays towards self‐powered photodetection.     

An Ultrahigh Responsivity (9.7 mA W−1) Self‐Powered Solar‐Blind Photodetector Based on Individual ZnO–Ga2O3 Heterostructures

Highly crystallized ZnO–Ga₂O₃ core–shell heterostructure microwire is synthesized by a simple one‐step chemical vapor deposition method, and constructed into a self‐powered solar‐blind (200–280 nm) photodetector with a sharp cutoff wavelength at 266 nm. The device shows an ultrahigh responsivity (9.7 mA W^?1) at 251 nm with a high UV/visible rejection ratio (R _{251 nm}/R _{400 nm}) of 6.9 × 10² under zero bias. The self‐powered device has a fast response speed with rise time shorter than 100 µs and decay time of 900 µs, respectively. The ultrahigh responsivity, high UV/visible rejection ratio, and fast response speed make it highly suitable in practical self‐powered solar‐blind detection. Additinoally, this microstructure heterojunction design method would provide a new approach to realize the high‐performance self‐powered photodetectors.     

ReS2‐Based Field‐Effect Transistors and Photodetectors

Atomically thin 2D layered transition metal dichalcogenides (TMDs) have been extensively studied in recent years because of their appealing electrical and optical properties. Here, the fabrication of ReS₂ field‐effect transistors is reported via the encapsulation of ReS₂ nanosheets in a high‐κ Al₂O₃ dielectric environment. Low‐temperature transport measurements allow to observe a direct metal‐to‐insulator transition originating from strong electron–electron interactions. Remarkably, the photodetectors based on ReS₂ exhibit gate‐tunable photoresponsivity up to 16.14 A W^?1 and external quantum efficiency reaching 3168%, showing a competitive device performance to those reported in graphene, MoSe₂, GaS, and GaSe‐based photodetectors. This study unambiguously distinguishes ReS₂ as a new candidate for future applications in electronics and optoelectronics.     

Fully Transparent p‐MoTe2 2D Transistors Using Ultrathin MoOx/Pt Contact Media for Indium‐Tin‐Oxide Source/Drain

Since transition metal dichalcogenide (TMD) semiconductors are found as 2D van der Waals materials with a discrete energy bandgap, many 2D‐like thin field effect transistors (FETs) and PN diodes are reported as prototype electrical and optoelectronic devices. As a potential application of display electronics, transparent 2D FET devices are also reported recently. Such transparent 2D FETs are very few in report, yet no p‐type channel 2D‐like FETs are seen. Here, 2D‐like thin transparent p‐channel MoTe₂ FETs with oxygen (O₂) plasma‐induced MoO_x/Pt/indium‐tin‐oxide (ITO) contact are reported for the first time. For source/drain contact, 60 s short O₂ plasma and ultrathin Pt‐deposition processes on MoTe₂ surface are sequentially introduced before ITO thin film deposition and patterning. As a result, almost transparent 2D FETs are obtained with a decent mobility of ≈5 cm² V^?1 s^?1, a high ON/OFF current ratio of ≈10⁵, and 70% transmittance. In particular, for normal MoTe₂ FETs without ITO, O₂ plasma process greatly improves the hole injection efficiency and device mobility (≈60 cm² V^?1 s^?1), introducing ultrathin MoO_x between Pt source/drain and MoTe₂. As a final device application, a photovoltaic current modulator, where the transparent FET stably operates as gated by photovoltaic effects, is integrated.     

Efficient Assembly of Bridged β‐Ga2O3 Nanowires for Solar‐Blind Photodetection

An increasing number of applications using ultraviolet radiation have renewed interest in ultraviolet photodetector research. Particularly, solar‐blind photodetectors sensitive to only deep UV (<280 nm), have attracted growing attention because of their wide applicability. Among recent advances in UV detection, nanowire (NW)‐based photodetectors seem promising, however, none of the reported devices possesses the required attributes for practical solar‐blind photodetection, namely, an efficient fabrication process, a high solar light rejection ratio, a low photocurrent noise, and a fast response. Herein, the assembly of β‐Ga₂O₃ NWs into high‐performance solar‐blind photodetectors by use of an efficient bridging method is reported. The device is made in a single‐step chemical vapor deposition process and has a high 250‐to‐280‐nm rejection ratio (～2 × 10³), low photocurrent fluctuation (<3%), and a fast decay time (<<20 ms). Further, variations in the synthesis parameters of the NWs induce drastic changes in the photoresponse properties, which suggest a possibility for tuning the performance of the photodetectors. The efficient fabrication method and high performance of the bridged β‐Ga₂O₃ NW photodetectors make them highly suitable for solar‐blind photodetection.     

Mixed‐Dimensional 1D ZnO–2D WSe2 van der Waals Heterojunction Device for Photosensors

2D layered van der Waals (vdW) atomic crystals are an emerging class of new materials that are receiving increasing attention owing to their unique properties. In particular, the dangling‐bond‐free surface of 2D materials enables integration of differently dimensioned materials into mixed‐dimensional vdW heterostructures. Such mixed‐dimensional heterostructures herald new opportunities for conducting fundamental nanoscience studies and developing nanoscale electronic/optoelectronic applications. This study presents a 1D ZnO nanowire (n‐type)–2D WSe₂ nanosheet (p‐type) vdW heterojunction diode for photodetection and imaging process. After amorphous fluoropolymer passivation, the ZnO–WSe₂ diode shows superior performance with a much‐enhanced rectification (ON/OFF) ratio of over 10⁶ and an ideality factor of 3.4–3.6 due to the carbon–fluorine (C? F) dipole effect. This heterojunction device exhibits spectral photoresponses from ultraviolet (400 nm) to near infrared (950 nm). Furthermore, a prototype visible imager is demonstrated using the ZnO–WSe₂ heterojunction diode as an imaging pixel. To the best of our knowledge, this is the first demonstration of an optoelectronic device based on a 1D–2D hybrid vdW heterojunction. This approach using a 1D ZnO–2D WSe₂ heterojunction paves the way for the further development of electronic/optoelectronic applications using mixed‐dimensional vdW heterostructures.     

Reconfigurable and Broadband Polarimetric Photodetector

The sensitive detection of light polarization besides the intensity and wavelength, can provide a new degree of freedom for more and clearer information of imaging targets in night, fog, and smoke environment. However, the conventional filter-integrated polarimetric photodetectors suffer from the complicated fabrication process and limited spectral range. Herein, broadband and polarization-sensitive photodetectors are achieved with reconfigurable operation mode, utilizing the linear dichroism and narrow band gap of 2D As_0.4P_0.6 with in-plane anisotropic structure. In As_0.4P_0.6-MoTe₂ heterojunction device, both photo-gating and photovoltaic modes are operated and switchable, contributing to high responsivity (1590 A W⁻¹ at 405 nm and 14.7 A W⁻¹ at 1550 nm) and ultrafast speed (25 µs) in the wide spectral band (405–1550 nm). Interestingly, an optical reversal is observed on both linear dichroism and polarimetric photocurrent due to the wavelength-dependent polarization reverse nature of the As_0.4P_0.6 flakes. The dichroism ratio of photocurrent can be modulated from unity to ≈10 by varying the gate voltage, enabling the reconfigurable detection mode from polarization-independence to polarization-susceptibility. This study demonstrates a new prototype device comprising low symmetric van der Waals heterostructure, possessing the gate-tunability on both photo-gain and dichroism ratio, toward high performance, reconfigurable, broadband, and polarization-resolved photodetection and imaging applications.     

Non‐Lithographic Fabrication of All‐2D α‐MoTe2 Dual Gate Transistors

As one of the emerging new transition‐metal dichalcogenides materials, molybdenum ditelluride (α‐MoTe₂) is attracting much attention due to its optical and electrical properties. This study fabricates all‐2D MoTe₂‐based field effect transistors (FETs) on glass, using thin hexagonal boron nitride and thin graphene in consideration of good dielectric/channel interface and source/drain contacts, respectively. Distinguished from previous works, in this study, all 2D FETs with α‐MoTe₂ nanoflakes are dual‐gated for driving higher current. Moreover, for the present 2D dual gate FET fabrications on glass, all thermal annealing and lithography processes are intentionally exempted for fully non‐lithographic method using only van der Waal's forces. The dual‐gate MoTe₂ FET displays quite a high hole and electron mobility over ≈20 cm² V^?1 s^?1 along with ON/OFF ratio of ≈10⁵ in maximum as an ambipolar FET and also demonstrates high drain current of a few tens‐to‐hundred μA at a low operation voltage. It appears promising enough to drive organic light emitting diode pixels and NOR logic functions on glass.     

Ultrahigh Stability 3D TI Bi2Se3/MoO3 Thin Film Heterojunction Infrared Photodetector at Optical Communication Waveband

Infrared (IR) detection at 1300–1650 nm (optical communication waveband) is of great significance due to its wide range of applications in commerce and military. Three dimensional (3D) topological insulator (TI) Bi₂Se₃ is considered a promising candidate toward high‐performance IR applications. Nevertheless, the IR devices based on Bi₂Se₃ thin films are rarely reported. Here, a 3D TI Bi₂Se₃/MoO₃ thin film heterojunction photodetector is shown that possesses ultrahigh responsivity (R_i), external quantum efficiency (EQE), and detectivity (D*) in the broadband spectrum (405–1550 nm). The highest on–off ratio of the optimized device can reach up to 5.32 × 10⁴. R_i, D*, and the EQE can reach 1.6 × 10⁴ A W^?1, 5.79 × 10¹¹ cm² Hz^1/2 W^?1, and 4.9 × 10⁴% (@ 405 nm), respectively. Surprisingly, the R_i can achieve 2.61 × 10³ A W^?1 at an optical communication wavelength (@ 1310 nm) with a fast response time (63 µs), which is two orders of magnitude faster than that of other TIs‐based devices. In addition, the device demonstrates brilliant long‐term (>100 days) environmental stability under environmental conditions without any protective measures. Excellent device photoelectric properties illustrate that the 3D TI/inorganic heterojunction is an appropriate way for manufacturing high‐performance photodetectors in the optical communication, military, and imaging fields.     

A Noble Metal Dichalcogenide for High‐Performance Field‐Effect Transistors and Broadband Photodetectors

2D layered materials are an emerging class of low‐dimensional materials with unique physical and structural properties and extensive applications from novel nanoelectronics to multifunctional optoelectronics. However, the widely investigated 2D materials are strongly limited in high‐performance electronics and ultrabroadband photodetectors by their intrinsic weaknesses. Exploring the new and narrow bandgap 2D materials is very imminent and fundamental. A narrow‐bandgap noble metal dichalcogenide (PtS₂) is demonstrated in this study. The few‐layer PtS₂ field‐effect transistor exhibits excellent electronic mobility exceeding 62.5 cm² V^?1 s^?1 and ultrahigh on/off ratio over 10⁶ at room temperature. The temperature‐dependent conductance and mobility of few‐layer PtS₂ transistors show a direct metal‐to‐insulator transition and carrier scattering mechanisms, respectively. Remarkably, 2D PtS₂ photodetectors with broadband photodetection from visible to mid‐infrared and a fast photoresponse time of 175 µs at 830 nm illumination for the first time are obtained at room temperature. Our work opens an avenue for 2D noble‐metal dichalcogenides to be applied in high‐performance electronic and mid‐infrared optoelectronic devices.     

Low‐Temperature‐Grown Transition Metal Oxide Based Storage Materials and Oxide Transistors for High‐Density Non‐volatile Memory

An effective stacked memory concept utilizing all‐oxide‐based device components for future high‐density nonvolatile stacked structure data storage is developed. GaInZnO (GIZO) thin‐film transistors, grown at room temperature, are integrated with one‐diode (CuO/InZnO)–one‐resistor (NiO) (1D–1R) structure oxide storage node elements, fabricated at room temperature. The low growth temperatures and fabrication methods introduced in this paper allow the demonstration of a stackable memory array as well as integrated device characteristics. Benefits provided by low‐temperature processes are demonstrated by fabrication of working devices over glass substrates. Here, the device characteristics of each individual component as well as the characteristics of a combined select transistor with a 1D–1R cell are reported. X‐ray photoelectron spectroscopy analysis of a NiO resistance layer deposited by sputter and atomic layer deposition confirms the importance of metallic Ni content in NiO for bi‐stable resistance switching. The GIZO transistor shows a field‐effect mobility of 30 cm² V⁻¹ s⁻¹, a V_th of +1.2 V, and a drain current on/off ratio of up to 10⁸, while the CuO/InZnO heterojunction oxide diode has forward current densities of 2 × 10⁴ A cm⁻². Both of these materials show the performance of state‐of‐the‐art oxide devices.     

High Performance BiOCl Nanosheets/TiO2 Nanotube Arrays Heterojunction UV Photodetector: The Influences of Self‐Induced Inner Electric Fields in the BiOCl Nanosheets

BiOCl nanosheets/TiO₂ nanotube arrays heterojunction UV photodetector (PD) with high performance is fabricated by a facile anodization process and an impregnation method. The heterojunction at the interface and the internal electric fields in the BiOCl nanosheets faciliate the separation of photogenerated charge carriers and regulate the transportation of the electrons. Compared with the large dark current (≈10^?5 A), low on/off ratio (8.5), and slow decay time (>60 s) of the TiO₂ PD, the optimized heterojunction PD (6‐BiOCl–TiO₂) yields dramatically decreased dark current (≈1 nA), ultrahigh on/off ratio (up to 2.2 × 10⁵), and fast decay speed (0.81 s) under 350 nm light illumination at ?5 V. Moreover, it exhibits an increased responsivity of 41.94 A W^?1, a remarkable detectivity (D*) of 1.41 × 10¹⁴ Jones, and a high linear dynamic range of 103.59 dB. The loading amount and growth orientations of the BiOCl nanosheets alter the roles of the self‐induced internal electric field in regulating the behaviors of the charge carriers, thus affecting the photoelectric properties of the heterojunction PDs. These results demonstrate that rational construction of novel heterojunctions hold great potentials for fabricating photodetectors with high performance.     

Scalable All‐Evaporation Fabrication of Efficient Light‐Emitting Diodes with Hybrid 2D–3D Perovskite Nanostructures

Quasi‐2D (Q2D) lead halide perovskites have emerged as promising materials for light‐emitting diodes (LEDs) due to their tunable emission, slowed‐down carrier diffusion, and improved stability. However, they are primarily fabricated through solution methods, which hinders its large‐scale manufacture and practical applications. Physical‐vapor‐deposition (PVD) methods have well demonstrated the capability for reproducible, scalable, and layer‐by‐layer fabrication of high quality organic/inorganic thin films. Herein, for the first time, the full‐evaporation fabrication of organic–inorganic hybrid ((BA)₂Cs_n?1Pb_nBr_3n+1) Q2D–3D PeLEDs is demonstrated. The morphology and crystal phase of the perovskite are controlled from 3D to 2D by modulating material composition, annealing temperature, and film thicknesses. The confinement of carriers in 3D layers and the energy funnel effect are discovered and discussed. Importantly, a record high external quantum efficiency (EQE) of 5.3% based on evaporation method is achieved. Moreover, a centimeter‐scale PeLED (1.5 cm × 2 cm) is obtained. Furthermore, the T₅₀ lifetime of the device with an initial brightness of 100 cd m^?2 is found to be 90 min with a thin layer PMMA passivation, which is among the longest for all PVD processed PeLEDs. Overall, this work casts a solid stepping stone towards the fabrication of high‐performance PeLEDs on a large‐scale.     

Sensitive and Ultrabroadband Phototransistor Based on Two‐Dimensional Bi2O2Se Nanosheets

Bi₂O₂Se, a high‐mobility and air‐stable 2D material, has attracted substantial attention for application in integrated logic electronics and optoelectronics. However, achieving an overall high performance over a wide spectral range for Bi₂O₂Se‐based devices remains a challenge. A broadband phototransistor with high photoresponsivity (R) is reported that comprises high‐quality large‐area ( ≈ 180 µm) Bi₂O₂Se nanosheets synthesized via a modified chemical vapor deposition method with a face‐down configuration. The device covers the ultraviolet (UV), visible (Vis), and near‐infrared (NIR) wavelength ranges (360–1800 nm) at room temperature, exhibiting a maximum R of 108 696 A W^?1 at 360 nm. Upon illumination at 405 nm, the external quantum efficiency, R, and detectivity (D*) of the device reach up to 1.5 × 10⁷%, 50055 A W^?1, and 8.2 × 10¹² Jones, respectively, which is attributable to a combination of the photogating, photovoltaic, and photothermal effects. The devices reach a ?3 dB bandwidth of 5.4 kHz, accounting for a fast rise time (τ_rise) of 32 µs. The high sensitivity, fast response time, and environmental stability achieved simultaneously in these 2D Bi₂O₂Se phototransistors are promising for high‐quality UV and IR imaging applications.     

Salt‐Assisted Growth of P‐type Cu9S5 Nanoflakes for P‐N Heterojunction Photodetectors with High Responsivity

P‐n junctions based on two dimensional (2D) van der Waals (vdW) heterostructure are one of the most promising alternatives in next‐generation electronics and optoelectronics. By choosing different 2D transition metal dichalcogenides (TMDCs), the p‐n junctions have tailored energy band alignments and exhibit superior performance as photodetectors. The p‐n diodes working at reverse bias commonly have high detectivity due to suppressed dark current but suffer from low responsivity resulting from small quantum efficiency. Greater build‐in electric field in the depletion layer can improve the quantum efficiency by reducing recombination of charge carriers. Herein, Cu₉S₅, a novel p‐type semiconductor with direct bandgap and high optical absorption coefficient, is synthesized by salt‐assisted chemical vapor deposition (CVD) method. The high density of holes in Cu₉S₅ endows the constructed p‐n junction, Cu₉S₅/MoS₂, with strong build‐in electric field according to Anderson heterojunction model. Consequently, the Cu₉S₅/MoS₂ p‐n heterojunction has low dark current at reverse bias and high photoresponse under illumination due to the efficient charge separation. The Cu₉S₅/MoS₂ photodetector exhibits good photodetectivity of 1.6 × 10¹² Jones and photoresponsivity of 76 A W^?1 under illumination. This study demonstrates Cu₉S₅ as a promising p‐type semiconductor for high‐performance p‐n heterojunction diodes.     

Role of Molecular Sieves in the CVD Synthesis of Large‐Area 2D MoTe2

The synthesis of high‐quality 2D MoTe₂ with a desired phase on SiO₂/Si substrate is crucial to its diverse applications. A side reaction of Te with the substrate Si leading to SiTe and Si₂Te₃ tends to happen during growth, resulting in the failure to obtain MoTe₂. It has been found that molecular sieves can adsorb the silicon telluride byproducts and eliminate the influence of the side reaction during the chemical vapor deposition synthesis of MoTe₂. With the help of molecular sieves, few‐layer 1T′ MoTe₂ can be grown from the MoO_x precursor. Pure 1T′ MoTe₂ and 2H MoTe₂ regions in centimeter‐sized areas synthesized on the same piece of SiO₂/Si substrate can be obtained by using an overlapped geometry. The strategy provides a new method to controllably synthesize MoTe₂ with desired phases and can be generalizable to the synthesis of other tellurium‐based layered materials.