防霉剂双乙酸钠的特征及其发展建议

本介绍双乙酸钠防霉剂产品的特性、应用及生产方法，结合双乙酸钠与其它品种防霉剂的比较、双乙酸钠产品的市场前景以及双乙酸钠产品在我国推广应用的重要意义，分析探讨了在我国推广双乙酸钠产品的有利因素和不利因素，提出了我国发展双乙酸钠防霉剂产品的建议。     

我国双乙酸钠防霉剂的发展策略

介绍了双乙酸钠防霉剂的特性、应用及生产方法 ,并与其它品种防霉剂进行了比较。阐述了双乙酸钠产品的市场前景以及在我国推广应用的意义 ,分析了在我国推广双乙酸钠产品的有利因素和不利因素 ,提出了我国发展双乙酸钠防霉剂产品的策略及建议     

一步法生产双乙酸钠新工艺

简述了双乙酸钠市场、生产现状及现有合成方法。研究了以冰醋酸和碳酸钠一步合成双乙酸钠的工艺和反应设备 ,使双乙酸钠生产工艺更为简单合理 ,经济易行 ,而且产率达 97%以上     

新型防霉保鲜剂——双乙酸钠的生产与应用研究进展

双乙酸钠是一种新型的多功能、绿色、高效防腐剂和食品添加剂,广泛用作粮食防霉剂、食品保鲜剂、饲料添加剂等。本文对双乙酸钠的生产和应用进行了总结,并对我国双乙酸钠产业的发展进行了预测和展望。     

双乙酸钠调研报告

通过对双乙酸钠的性能特点、主要用途、生产工艺、开发前景等进行调研论述,指出双乙酸钠是一种高效、广谱抗菌防霉剂,是一种极有发展前途的精细化工产品,并论述我公司发展双乙酸钠的可行性。     

新型防霉剂双乙酸钠的合成与应用

介绍了双乙酸钠的合成方法和应用,并与其他防霉剂进行了比较,指出了开发生产双乙酸钠的必要性。     

多功能饲料添加剂双乙酸钠的应用与生产方法

叙述了新型多功能饲料添加剂双乙酸钠的应用情况,并简述了国内外双乙酸钠的工业生产方法。     

双乙酸钠市场发展潜力大

有关人士指出,双乙酸钠在今后几年将供不应求;其市场前景十分看好。 双乙酸钠在工业领域中主要用作螯合剂、匀化剂、媒染剂和酸味剂等。在粮食、食品、饲料工业中用作防霉剂。双乙酸钠的防霉防腐和保     

新型防腐防霉剂双乙酸钠的制备与应用

介绍了双乙酸钠的性能、特点及其防腐机理；讨论了制备双乙酸钠的多种方法，概述了双乙酸钠在食品，粮食谷物，饲料，化工等多个领域中的应用，并根据我国的实际情况对其发展前景进行了预测和展望。     

关于双乙酸钠的分子式

在研究成功双乙酸钠零污染合成工艺的基础上 ,培养成功了晶型完美的大尺寸晶体和适宜进行X光结构分析的小尺寸单晶 ,并进一步应用四圆衍射仪测得其晶体结构。结果表明在双乙酸钠分子中不存在相对独立的水分子或乙酸分子 ,为纠正目前在文献和应用上关于双乙酸钠分子式写法上存在的混乱 ,作者根据结构测定和元素分析等结果提出了双乙酸钠分子式的合理写法 :(CH3COO) 2 HNa     

Oxidation of acylglycerols and phosphoglycerides by soybean lipoxygenase

Lipoxygenase (EC 1.13.11.12) catalyzes the incorporation of oxygen into polyunsaturated fatty acids, resulting in the formation of their corresponding hydroperoxides. The ability of a commercial preparation of soybean (Glycine max L. Merr.) lipoxygenase to catalyze the oxidation of acylglycerols and phosphoglycerides was investigated. The oxidation rate of trilinolein increased nearly 100% when 5 mM deoxycholate was added to the reaction medium. With further increases in the concentration of deoxycholate, the oxidation rate decreased slightly. The pH profile of trilinolein oxidation was bell-shaped. The rate of oxidation was maximal at pH 8, and it decreased to near zero at pH 5 and pH 11. Even under optimal conditions, the rate of trilinolein oxidation was only 3% of that of linoleic acid, and analysis of time course data showed that, at most, 15% of available linoleate was oxidized. In contrast to the slow rate of trilinolein oxidation, tested phosphoglycerides and diacylglycerols were oxidized at moderate rates. The rate of phosphoglyceride oxidation depended upon the structure of the polar head group and varied between 7–28% of the rate of linoleic acid oxidation. Diacylglycerols reacted at a rate that was 40% of that of linoleic acid. Analysis of the time course of 1,3-dilinolein oxidation showed that as much as 67% of the available linoleate could be converted to the corresponding hydroperoxide. Analyses by high-performance liquid chromatography revealed that more than 20% of the 1,3-dilinolein was converted to unidentified products that are not hydroperoxides.     

Trapping the western pine beetle at and near a source of synthetic attractive pheromone Effects of trap size and position

Western pine beetles were caught on unbaited sticky traps placed near a source ofexo-brevicomin, frontalin, and myrcene. Size of trap, distance and direction from the source of attractant, and height from the ground were varied. Significant differences in trap catch were observed in relation to each of the variables. Traps close to the source of attractant caught more beetles than traps farther from the source. Traps downwind of the source of attractant caught more beetles than did upwind traps. More males than females were trapped close to the source of attractant.Based in part on a thesis submitted by the senior author to the University of California, Berkeley, California, in partial fulfillment of the requirements for the degree Master of Science in entomology, December 1976. These studies were supported by the U.S. Forest Service and in part by the Rockefeller Foundation and a joint grant (NSF GB-34718/BMS 75-04223) from the U.S. National Science Foundation and the U.S. Environmental Protection Agency to the University of California. The findings, opinions, and recommendations are not necessarily those of the University of California or the funding agencies.Trade names and commercial enterprises or products are mentioned solely for information and do not constitute endorsement by the U.S. Department of Agriculture or University of California.     

Breakage patterns of agglomerates

The experimental information available in the literature regarding the patterns of breakage of agglomerate materials is scarce, particularly in dynamic loading. The primary objective of this paper is to present our findings on the breakage patterns of the agglomerates and the interparticle bond. A high-speed digital video imaging technique is used here to gain an insight into the impact behaviour of individual agglomerates against a target plate. Several breakage patterns are observed. Agglomerates may suffer localised damage only, with the disintegration of the damaged zone into very fine debris, or localised damage combined with fracture. The frequency of occurrence of these patterns depends on the impact velocity and agglomerate structure. The pattern of breakage affects significantly the size distribution of the impact product. An investigation of the breakage of individual interparticle bonds is also presented. Two forms of failure are observed, internal (cohesive) and interfacial (adhesive) failure. The morphology of the fractured surface depends greatly on the type of breakage. Internal breakage shows irregular surfaces due to crack jumping, whereas interfacial failure produces clean, smooth fracture surfaces. These observations should provide the necessary foundation for the development of a fundamental model of agglomerate breakage.     

Distribution of birch (Betula SPP.), willow (Salix SPP.), and poplar (Populus SPP.) secondary metabolites and their potential role as chemical defense against herbivores

Isoprenoids and phenolics, major metabolites of important browse species, are reviewed in regard to concentrations, distribution within tissues, and between species. Seasonal variation of specific substances and changes with age of the plant are also considered. The distribution of substances may affect food selection and feeding behavior of animals. Wild mammalian herbivores tend to avoid plant parts rich in these substances, in spite of high nutritional content of the plant tissue. Possible mechanisms for defense by plants against depredation by mammalian herbivores are discussed within the framework of the plants' biochemistry.     

Charakterisierung von Suspensionen nanoskaliger Partikel mittels Ultraschallspektroskopie und elektroakustischer Methoden

Technical control over dispersions with particles in the nanometer size realm should bring about a boost in innovations for some parts of industry. Requirements for the development of these new products is the accurate characterization of the various materials systems. A characterization should always include a determination of the particle size distribution, since it is coupled to the specific effects of these systems. Ultrasound measurement techniques and electroacoustics are two if the available techniques that allow determination of the size distribution and zeta potential of particles with dimensions up to 10 nanometers. A further fundamental advantage of the method is the possibility of carrying out measurements in high‐concentration materials systems. This report describes ultrasound spectroscopy for the measurement of fine‐ and very‐fine‐dispersion particles, and the known theoretical concepts for the interpretation of spectra. In addition, experiences in the use of currently available measurement techniques are presented.     

Mechanical Means of Enhancing Drying Rates: Effect on Drying Kinetics and Quality

The effect of various pretreatments on drying kinetics as well as quality parameters of selected vegetables and fruits was studied experimentally in a convective dryer. The pretreatments tested include application of pinholes and drilled holes of different diameters and densities, blanching and freezing. Potato, cassava, dragon fruit and red chilli were used as the sample drying materials. As expected, increase of the diameter and density of the holes under fixed drying conditions increased the drying rate. Samples with drilled holes showed better drying performance than those with pinholes. The improvement of the drying rate was found to be dependent on the physical properties and the initial moisture content of the material. Results show that the drying performance of the products that possess a skin of low moisture diffusivity, such as chilli, can be improved significantly by blanching and making perforations in the skin. Overall changes of color and volume shrinkage during drying of the samples with and without holes were similar. The effect of different modes of heat input, such as convection, conduction and radiation, on the drying performance of the treated samples was also experimentally investigated. On-off type controllers were used to regulate the power of the heaters and maintain the product temperature within a range of pre-set values. Convection combined with radiation displayed the highest drying rate.     

Inorganic/organic nanocomposite coatings: The next step in coating performance

Inorganic/organic hybrid materials have considerable promise and are beginning to become a major area of research for many coating usages, including abrasion and corrosion resistance. Our primary approach is to prepare the inorganic phase in situ within the film formation process of the organic phase. The inorganic phase is introduced via sol-gel chemistry into a thermosetting organic phase. By this method, the size, periodicity, spatial positioning, and density of the inorganic phase can be controlled. An important aspect of the inorganic/organic hybrid materials is the coupling agent. The initial task of the coupling agent is to provide uniform mixing of the oligomeric organic phase with the sol-gel precursors, which are otherwise immiscible. UV-curable inorganic/organic hybrid systems have the advantages of a rapid cure and the ability to be used on heat sensitive substrates such as molded plastics. Also, it is possible to have better control of the growth of the inorganic phase using UV curing. It is our ultimate goal to completely separate the curing of inorganic and organic phases to gain complete control over the morphology, and hence optimization of “all” the coating properties. Thus far, it has been found that concomitant UV curing of the inorganic and organic phases using titanium sol-gel precursors afforded nanocomposite coatings which completely block the substrate from UV light while maintaining a transparent to visible light. Also, it has been found that the morphology of the inorganic phase is highly dependent on the concentration and reactivity of the coupling agent. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004, in Chicago, IL.     

Effect of Dose and Administration Period of Seed Cake of Genetically Modified and Non-Modified Flax on Selected Antioxidative Activities in Rats

Flaxseed cake containing antioxidants is a valuable dietary component. Its nutritional effect may be diminished by the presence of anti-nutrients. The work was aimed at determining the effect of different contents of flaxseed cake in diets and their administration period on the development of rats and selected parameters of their health status. Diets with 15% and 30% addition of genetically modified (GM) flax seed cake with enhanced synthesis of polyphenols, as well as Linola non-GM flax were administered in short-term (33 days) and long-term (90 days) experiments. The 30% addition of flaxseed cake reduced digestibility of dietary nutrients, GM flaxseed cake lowered body weight gains. The relative weight of selected organs, hematological blood markers and serum activities of aspartate and alanine aminotransferases (AST, ALT) were not affected. Flaxseed cake consumption reduced serum concentration of albumins and increased globulins. Administration of 30% flaxseed cake improved plasma total antioxidant status and 30% GM flaxseed cake lowered liver thiobarbituric acid reactive substances. The activities of superoxide dismutase in erythrocytes, glutathione peroxidase in plasma and the liver concentration of 8-oxo-2′-deoxyguanosine were not changed. Most morphometric parameters of the small intestine did not differ between feeding groups. The administration of diets with 30% addition of flaxseed cake for 90 days improved the antioxidant status in rats.     

Emerging role of nanobiocatalysts in hydrolysis of lignocellulosic biomass leading to sustainable bioethanol production

Catalytic conversion (hydrolysis) of carbohydrate polymers present in the lignocellulosic biomass into fermentable sugars is a key step in the production of bioethanol. Although, acid and enzymatic catalysts are conventionally used for the catalysis of various lignocellulosic biomass, recently application of immobilized enzymes (biocatalysts) have been considered as the most promising approach. Immobilization of different biocatalysts such as cellulase, β-glucosidase, cellobiose, xylanase, laccase, etc. on support materials including nanomaterials to form nanobiocatalyst increases catalytic efficacy and stability of enzymes. Moreover, immobilization of biocatalysts on magnetic nanoparticles (magnetic nanobiocatalysts) facilitates easy recovery and reuse of biocatalysts. Therefore, utilization of nanobiocatalysts for catalysis of lignocellulosic biomass is helpful for the development of cost-effective and ecofriendly approach. In this review, we have discussed various conventional methods of hydrolysis and their limitations. Special emphasis has been made on nanobiocatalysts used for hydrolysis of lignocellulosic biomass. Moreover, the other most important aspects, like nanofiltration of biomass, conversion of lignocellulose to nanocellulose, and toxicological issues associated with application of nanomaterials are also discussed.     

Allelopathic interactions among algae

Five species of green algae isolated from the Cleveland County, Oklahoma, area and a commercially obtained yellow-green alga were tested for allelopathic interactions. Axenic cultures ofPandorina morum Bory were stimulated in three sterile filtrates from nonaxenic cultures ofScenedesmus incrassatulus var.mononae G.M. Smith, with the oldest filtrate showing the least stimulation. By measuring the growth of axenic cultures inoculated into sterile filtrates of old cultures, instances of inhibition and stimulation were recorded in three screening experiments.Cosmarium vexatum West filtrate was inhibitory to the five other species, a characteristic probably important in its role of producing waterblooms in ponds and swamps. The allelopathic effects of filtrates of the five other species onBolrydium becherianum Vischer could be a key to its restriction to terrestrial sites. Instances of heat lability of the active substances were noted. These interactions, both allelopathic and stimulatory, probably play a significant role in the succession of algal blooms in nature.