Fabrication and characterization of bioactive glass/hydroxyapatite nanocomposite foam by gelcasting method

Bioceramic foams have been applied for drug releasing agents, cell loading, and widely for hard tissue scaffold. The aim of this study was fabrication and characterization of nanostructure bioceramic composite foam (BCF) consisting of hydroxyapatite (HA) and bioactive glass (BG) via gelcasting method for applications in tissue engineering. X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) analysis techniques were utilized in order to evaluate respectively, phase composition, dimension, morphology, and interconnectivity of pores, and particle size of synthesized HA, BG, and BCF. The results showed that fabrication of the BCF with a particle size in the range 20-42 nm and pore size in the range 100-250 μm was successfully performed. The maximum values of compressive strength and elastic modulus of the BCF were found to be about 1.95 MPa and 204 MPa, respectively, related to a sample sintered at 900 °C for 4 h. The mean values of the true (total) and apparent (interconnected) porosity were calculated in the range 86-91% and 60-71%, respectively. It seems that the measured properties make the BCF a good candidate for tissue engineering applications, preferentially in drug delivery, cell loading, and other nonloading applications.     

Studies on novel bioactive glasses and bioactive glass-nano-HAp composites suitable for coating on metallic implants

A series of novel zinc oxide (ZnO) containing bioactive glass compositions in SiO₂-Na₂O-CaO-P₂O₅ system and composite with hydroxyapatite (HAp) nano-particles were developed and applied as coating on Ti-6Al-4V substrates. The bioactive glasses and their composites were also processed to yield dense scaffolds, porous scaffolds and porous bone filler materials. The coating materials and the coatings were characterized and evaluated by different in vitro techniques to establish their superior mechanical properties. The cytotoxicity test of the coating material, porous and dense scaffolds and coated specimens showed non-cytotoxicity, biocompatibility and promising in vitro bioactivity for all tested samples. The dissolution behaviour studies of the bioactive glasses and the composites in simulated body fluid showed promising in vitro release pattern and bioactivity for all tested samples. Addition of nanosized HAp improves mechanical properties of the bioactive glass coating without affecting the in vitro bioactivity.     

Influence of concentration of hydroxyapatite surface modifier agent on bioactive composite characteristics

The characterization of chitosan – hydroxyapatite (CH – HAp) composite sponges prepared via freeze-drying methodology is reported in this study. Stearic acid (SA), added as a surface modifier of the HAp nanoparticles, induced changes in the TG/DTG results, particle size distribution and particle morphology. Composite sponges prepared with SA coated HAp demonstrated enhanced biocompatibility and structural properties, as compared to the composites prepared with uncoated HAp. SA coating modified the morphology of the composite, promoting a better dispersion of HAp particles within the composite sponges, and better homogeneity of the polymeric cover with HAp particles. The viability of the composites for cell culture applications was analyzed, and the results suggest that the sponges are biocompatible. Therefore, SA proved to be a good candidate for surface coating of HAp nanoparticles prevent agglomerations, and could be used effectively in the preparation of biocompatible composite sponges with chitosan.     

In vitro cytotoxicity,corrosion and antibacterial efficiencies of Zn doped hydroxyapatite coated Ti based implant materials

Ti6Al4V alloy is successfully used as implant material in dental and orthopedic surgeries for years due to its much better compatibility, lower density, corrosion resistance, etc. compared to the other metals. Meantime, modification of the surface of these alloys is needed to enhance material-tissue interaction and osteointegration between the implant and the bone. In this study, Ti6Al4V alloy surfaces were modified by application of RF magnetron sputtering technique and coated with zinc (Zn) doped hydroxyapatite (HAp). The obtained coating was very stable with highly crystalline structure, demonstrated enhanced corrosion resistance, osteointegration and antimicrobial effectiveness against Escherichia coli (E. coli) bacteria.     

Preparation of hydroxyapatite coating on smooth implant surface by electrodeposition

A novel process for the deposition of a hydroxyapatite (HA) coating on a smooth implant surface has been developed. Specimens were firstly subjected to electrodeposition at −1.8 V (versus Ag/AgCl) in a mixed solution of 0.042 M Ca(NO₃)₂·4H₂O and 0.025 M NH₄H₂PO₄ at 85 °C for 5 s, and then post-treated in 1 M NaOH solution for 30 min. The experimental results showed the specimens prepared by the designed process to have better adhesion properties than those prepared by the traditional electrodeposition process.     

In vitro behavior of bioactive phosphate glass–ceramics from the system P2O5–Na2O–CaO containing titania

Soda lime phosphate bioglass–ceramics with incorporation of small additions of TiO₂ were prepared in the metaphosphate and pyrophosphate region, using an appropriate two-step heat treatment of controlled crystallization defined by differential thermal analysis results. Identification and quantification of crystalline phases precipitated from the soda lime phosphate glasses were performed using X-ray diffraction analysis. Calcium pyrophosphate (β-Ca₂P₂O₇), sodium metaphosphate (NaPO₃), calcium metaphosphate (β-Ca(PO₃)₂), sodium pyrophosphate (Na₄P₂O₇), sodium calcium phosphate (Na₄Ca(PO₃)₆) and sodium titanium phosphate (Na₅Ti(PO₄)₃) phases were detected in the prepared glass–ceramics. The degradation of the prepared glass–ceramics was carried out for different periods of time in simulated body fluid at 37 °C using granules in the range 0.300–0.600 mm. The released ions were estimated by atomic absorption spectroscopy and the surface textures were measured by scanning electron microscopy. Investigation of in vitro bioactivity of the prepared glass–ceramics was done by the measurement of the infrared reflection spectra for the samples after immersion in the simulated body fluid for different periods at 37 °C. The result showed that no apatite layer was formed on the surface of the samples and the dominant phase remained on the surface was β-Ca₂P₂O₇, which is known for its bioactivity.     

Nanoindentation study of microplasma sprayed hydroxyapatite coating

The microplasma sprayed (MPS) hydroxyapatite (HAP) coating on surgical grade SS316L, is an emerging material for bio-ceramic based implant application involving higher reliability. For this purpose, a 200 μm thick MPS-HAP coating was developed on SS316L substrate and characterized by XRD, SEM and FE-SEM techniques. The local mechanical properties of the coating, e.g. nano-hardness and Young's modulus were evaluated by nanoindentation technique carried out with a Berkovich indenter at various depths in the range of about 170–3000 nm on a polished top surface. The characteristic values of nano-hardness (1.5–5 GPa) and Young's modulus (∼60–100 GPa) obtained through the application of Weibull statistics to the experimentally measured data revealed a strong indentation size effect (ISE). Attempts were made to explain the genesis of ISE on the basis of some existing and some new concepts.     

Fabrication,characterization and cellular biocompatibility of porous biphasic calcium phosphate bioceramic scaffolds with different pore sizes

Facile wet-chemical methods are applied to synthesize hydroxyapatite and β-tricalcium phosphate nanoparticles, respectively. Porous biphasic calcium phosphate (BCP) bioceramic scaffolds are then fabricated using as-prepared HA and β-tricalcium phosphate nanoparticle powders. The macro pore diameter of BCP bioceramic scaffolds can be controlled by adjusting the amount of surfactants. The average diameter of the macro pores in BCP bioceramic scaffolds increases from 100 to 600 µm with the decrease amount of sodium dodecyl sulfate from 0.8 to 0.5 g, respectively. The BCP bioceramic scaffolds gradually degrade and the calcium-phosphate compounds fully deposit when soaking in simulated body fluid solution. Moreover, The BCP bioceramic scaffolds have outstanding biocompatibility to promote the cellular growth and proliferation of human dental pulp stem cells (hDPSCs). The hDPSCs also demonstrate favorable cellular adhering capacity on the pore surface of scaffolds, especially on the scaffolds with 100–200 µm pore diameter. The porous BCP bioceramic scaffold with inter-connected pore structure, outstanding in vitro cellular biocompatibility, favorable cell viability and adhesion ability will be a promising biomaterial for bone or dentin tissue regeneration.     

A comparative physico-chemical study of bioactive glass and bone-derived hydroxyapatite

This study aimed at comparing the physico-chemical properties of bioactive glass and bone-derived hydroxyapatite (HA). 63S bioglass particles were obtained by sol-gel process and HA samples were derived from bovine bone. The chemical composition and the crystalline structure of both bioceramics were evaluated. Then the zeta potential in physiological saline and at different pH values was determined. It was found that the negativity of zeta potential for 63S bioglass is higher than that of bone-derived HA. The exothermal behavior through the hydration process was evaluated by isothermal microcalorimetry. The results showed that the librated heat during bioactive glass hydration process and its rate are almost ten times higher than HA. It could be related to different hydration mechanisms of bioglass and HA. However, for both bioglass and HA, this value is in the safe range and cannot be harmful for the adjacent tissues in the body.     

One step method to synthesize flower-like hydroxyapatite architecture using mussel shell bio-waste as a calcium source

Mussel shell, a calcium-rich resource, is found plenty in nature. We have developed a novel and facile method to convert mussel shell bio-waste into hydroxyapatite (HAp) biomaterial using microwave irradiation with the aid of ethylenediaminetetraacetic acid (EDTA) as chelating agent. The obtained HAp had flower-like morphology which can be a potential candidate for developing biomaterial for orthopedic applications. Moreover, the developed method has the potential to recover the bio-waste and reduce environment pollution.     

Marine biological waste as a source of hydroxyapatite for bone tissue engineering applications

The demand for bone graft substitutes for orthopedics and dentistry is constantly growing due to the increase of ageing-related diseases. Synthetic hydroxyapatite (HA) is largely used as a bone graft material thanks to its biocompatibility, osteointegration, osteoconductive and osteoinductive properties and similarity to biological apatite, the main mineral component of bones and teeth. Biogenic apatite has gained attention due to its peculiar intrinsic characteristics: multi-doped ion composition and micro- and nano-scale architecture make natural-derived HA particularly promising for biomedical applications.At the same time, the growing interest in green materials is pushing towards the use of more sustainable biomaterials precursors, including re-use materials: marine waste, such as mollusk-shells, shellfish carapaces, cuttlefish bone, and fishbone have become widely studied sources of biogenic HA. Indeed, they are rich in calcium carbonate (CaCO₃), which can be converted into HA by environmentally sustainable processes. This allows the transformation of waste into valuable materials, while paying attention to the issues of sustainability and circular economy.In this review, we listed and discussed the methods to produce HA starting from shell-derived CaCO₃, describing all the steps and synthesis routes proposed for the conversion procedure, with a special focus on the different species of marine shells used. We discussed the use of HA alone or in combination with other materials (natural and synthetic polymers), used to enhance the mechanical and biological properties.We summarized the types of devices obtained by marine-derived HA, including nanorods, particulates and scaffolds and we described their in vitro and in vivo behavior.The up-to-date literature was summarized in tables with a special focus on the in vitro and in vivo biological evaluation of such materials.In conclusion, composite biomaterials based on marine-derived biogenic HA are reported as potential candidates for synthetic bone substitutes highlighting their potential, limitations and future perspectives.     

Influence of silver on the structure,dielectric and antibacterial effect of silver doped bioglass-ceramic nanoparticles

We present the structural, dielectric, biocompatibility and antibacterial properties of nano-sized calcium phosphosilicate bioglass ceramics doped with 0, 2, 4 and 6 mol% Ag₂O. Sol-gel processes were chosen to synthesize the silver embedded nanosized glass ceramic particles. All samples were characterized by powder X-ray diffraction (XRD), thermogravimetric analysis, Fourier transform infrared (FTIR) spectroscopy, UV–visible and high resolution transmission electron microscopy (HR-TEM). The glass-ceramic nature of the samples is confirmed by XRD analysis. The FTIR spectra reveal the probable stretching and bending vibration modes of silicate and phosphate groups. UV–visible absorption spectra reveal the silver embedment as Ag⁺/Ag° form in the glass matrix. Nano-size of the glass ceramics and silver nanoparticle embedment in glass matrix are confirmed by HR-TEM analysis. Dielectric spectra of samples reveal non-Debye relaxation processes. The dielectric constant of samples initially decreased and then increased with Ag₂O content. The antibacterial activities of these bioceramics were tested with different bacteria using an agar well diffusion method. Silver doped samples show good antibacterial effects without compromising the formation of hydroxyapatites. The dielectric constant of the bioglass ceramics is correlated to their antibacterial performance, with low dielectric constants giving higher antibacterial activity.     

Electrophoretic deposition (EPD) of nanohydroxyapatite - nanosilver coatings on Ti13Zr13Nb alloy

Titanium and its alloys are the biomaterials most frequently used in medical engineering, especially as parts of orthopedic and dental implants. The surfaces of titanium and its alloys are usually modified to improve their biocompatibility and bioactivity, for example, in connection with the deposition of hydroxyapatite coatings.The objective of the present research was to elaborate the technology of electrophoretic deposition (EPD) of nanohydroxyapatite (nanoHAp) coatings decorated with silver nanoparticles (nanoAg) and to investigate the mechanical and chemical properties of these coatings as determined by EPD voltage and the presence of nanoAg. The deposition of nanoHAp was carried out at two voltage values, 15 and 30 V. The decoration of nanoHAp coatings with nanoAg was carried out using the EPD process at a voltage value of 60 V and a deposition time of 5 min. The thickness of the undecorated coatings was found to be 2.16 and 5.14 µm for applied EPD voltages of 15- and 30-V, respectively. The release rate of silver nanoparticles into an artificial saliva solution increased with exposure time and EPD voltage. The corrosion current, between 1 and 10 nA/cm², was significantly higher for undecorated nanoHAp coatings and close to that of the substrate for decorated nanoHAp coatings. The hardness of the undecorated nanoHAp coatings obtained at 15 and 30 V of EPD voltage attained 0.2245±0.036 and 0.0661±0.008 GPa, respectively. Resistance to nanoscratching was higher for thicker coatings. The wettability angle was lower for coatings decorated with nanoAg.     

Structural,optical, and electrical properties of cellulose/titanate nanosheets composite with enhanced protection against gamma irradiation

Two-dimensional (2D) materials have emerged as a promising functional filler in nanocomposites due to their unique anisotropy and resilience to harsh conditions. We report herein the use of Ti_0.91O₂ nanosheets as a protective component against γ-irradiation to cellulose paper. The titanate nanosheets were prepared via a sequence of solid-state synthesis of lepidocrocite-type Cs_0.7Ti_1.825O₄, proton exchange to H_0.7Ti_1.825O₄·H₂O, and exfoliation with tetrabutylammonium hydroxide. The nanosheets were incorporated into the commercial cellulose filter paper by a simple dip coating up to 0.6 mg cm⁻², equivalent to 10 wt% TiO₂. The nanosheets distribution was demonstrated by energy dispersive X-ray (EDX) mapping, synchrotron radiation X-ray tomographic microscopy (SRXTM), and atomic force microscopy (AFM). It is found that γ-irradiation (up to 50 kGy) destroyed the cellulose Iβ crystallinity of uncoated paper, but this is less pronounced in the cellulose/titanate nanosheets composite. This was also confirmed by the lack of a 235 nm-absorption characteristics of irradiation-induced decomposition product(s) in nanosheets-containing papers, which also exhibit UVA shielding property. The coated samples remained white while the uncoated ones were darkened with γ-irradiation. In addition, the nanosheets-coated papers showed dielectric permittivity, loss tangent, and AC conductivity which were invariant of the γ-dose, unlike those from the uncoated ones. Our work demonstrates the use of lead-free Ti_0.91O₂ nanosheets as a γ-shielding component to slow down/prevent structural, optical, and electrical properties damages in cellulose paper, which could extend to other nature-derived materials.     

Characterization,in vitro bioactivity and biological studies of sol-gel synthesized SrO substituted 58S bioactive glass

Bioactive glasses (BGs) are considered as a high potential candidate in bone repair and replacement. In the present study, sol–gel derived BGs based on 60% SiO₂-(36%-x) CaO-4%P₂O₅-x SrO (where x = 0, 5 and 10 mol%) quaternary system were synthesized and characterized. The effect of Sr substitutions on bioactivity, proliferation, alkaline phosphatase activity of osteoblast cell line MC3T3-E1 and antibacterial activity were investigated. Dried gels were stabilized at 700 °C to eliminate the nitrates and prevent the crystallization of bioactive glasses. X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy results confirmed the formation of hydroxycarbonate apatite on the BG surfaces. The 3-(4,5dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide and alkaline phosphate activity results showed that 5% SrO increased both differentiation and proliferation of MC3T3-E1 cells, while 10% SrO resulted in a decrease in bioactivity. Live/Dead and DAPI/Actin staining exhibited viable cell and the morphology of actin fibers and nuclei of MC3T3 cells treated with BG-0 and BG-5. The result of antibacterial test showed that strontium substituted 58S BG exhibited antibacterial effect against methicillin-resistant Staphylococcus aureus bacteria. Taken together, results suggest that 58S BG with 5 mol% SrO is a good candidate for bone tissue engineering with maximum cell proliferation and ALP activity, good bioactivity and high antibacterial efficiency.     

Osseointegration of sputtered SiC-added hydroxyapatite for orthopaedic applications

Over the last few years, a trend in medical applications is to find solutions for metallic implants using coatings that can improve bioactivity and osseointegration. The goal of this study was to obtain and investigate sputtered hydroxyapatite coatings enriched with SiC to enhance the bioactivity and osseointegration of Ti alloys used in orthopaedic applications. The films were characterized in terms of phase composition, roughness, corrosion resistance in a synthetic body fluid (SBF) and in vitro biocompatibility with MG 63 osteoblast-like cells. All of the investigations were conducted using XRD, AFM, cell viability assays and proliferation tests. The results revealed that the addition of SiC had a positive influence on the properties of the sputtered hydroxyapatite. The addition of SiC led to an improvement in coating adhesion and corrosion resistance in an SBF solution over the HAP coating. All of the coatings presented cell viability values over 90%, revealing their suitability for medical applications.     

Comparative study of the hydroxyapatite coatings prepared with/without substrate bias

The aim of this paper is to prepare the hydroxyapatite by Ion Beam Assisted Deposition and to investigate in terms of its elemental and phase composition, roughness and in vitro corrosion resistance. The coatings were prepared with and without applying bias on substrate, in order to find the effect of bias on the chemical, structural, morphological and anti-corrosive properties. The biased coatings exhibited Ca/P ratio closer to the value of the stoichiometric HAP (1.67). The phase composition is not affected by the bias evolution. The adhesion of both coatings is still satisfactory for biomedical applications, irrespective of the bias. Hydroxyapatite deposited without bias presented the best corrosion resistance in SBF at 37 °C, probably due to its smooth surface and low porosity. Moreover, this coating proved to have the highest protection ability at the SBF corrosive attack.     

TBA-based freeze/gel casting of porous hydroxyapatite scaffolds

Porous ceramic scaffolds with a controlled “designer” pore structure have been prepared by the freeze/gel casting route using a TBA-based hydroxyapatite slurry system with 20–40 wt.% solid content. The products were characterized in terms of sintered microstructure, together with physical and mechanical properties. After sintering at 1050–1250 °C, the advantages of freeze casting and gel casting appeared in the pore structure and compressive strength of the ceramics, i.e., unidirectional aligned macro-pore channels developed by controlling the solidification direction of the TBA solvent used in the freeze casting together with small diameter (micron sized) isolated pores formed in the dense outer walls of the pore channels when processed by gel casting. The sintered porosity and pore size generally resulted in a high solid loading giving low porosity and small pore size, this leading to higher compressive strengths. The scaffolds obtained exhibited an average porosity and compressive strength in the range 41.9–79.3% and 35.1–2.7 MPa, respectively, depending on the processing conditions used.     

Development of macroporous nanocomposite scaffolds of gelatin/bioactive glass prepared through layer solvent casting combined with lamination technique for bone tissue engineering

In this study, macroporous bioactive nanocomposite scaffolds were developed using cross-linked gelatin and bioactive glass (BaG) nanoparticles. First, BaG nanoparticles were synthesized via sol–gel method and characterized. Then, macroporous nanocomposites were prepared through layer solvent casting combined with freeze-drying and lamination techniques. This research has developed a new composition to produce a new bioactive nanocomposite which is porous with three-dimensional (3D) inter-connected microstructure, pore sizes are 200–500 μm, porosity are 72–86% and BaG nanoparticles are dispersed evenly among cross-linked gelatin matrices. It is mentionable that in this study, we have reported the formation of chemical bonds between BaG nanoparticles and gelatin for the first time. Finally, the in vitro cytocompatibility of the nanocomposite scaffolds was tested using SaOS-2 cell line.     

Microwave-induced small size effect of (Ba,Sr)3MgSi2O8:0.06Eu, 0.1Mn phosphor for 660 nm-featured bio-lighting

The 660 nm-featured (Ba, Sr) ₃MgSi₂O₈:0.06Eu^{2 +}, 0.1Mn²⁺(AMS-EM) phosphor in violet for red/blue bio-lighting LEDs was prepared by 2.45 GHz microwave (MW) high temperature firing procedure. The phase-pure host phase, (Ba, Sr) ₃MgSi₂O₈, was formed to be responsible for simultaneous red band emission from Mn ion and blue band emission from Eu ion, while the formation of an impurity phase of Sr₂SiO₄ responsible for 505 nm-peaked green band emission for Eu ion was effectively suppressed owing to MW fast-heating procedure. Small sized and agglomeration-free phosphor particles were either observed, which was probably resulted from suppressing the grain growth in as-formed host particles, compared with conventional high-temp solid state (SS) reaction firing procedure. These results indicate that high-temp MW firing procedure is suitable for preparing this simultaneously red- and blue-emitting AMS-EM phosphor in the application of bio-lighting for plant cultivation.