Biocompatibility and photoluminescence of Sm3+-doped SiO2-Gd2O3: A promising non-toxic red phosphor to plasmatic membrane tracking

Sm³⁺ doped SiO₂-Gd₂O₃ composites were obtained by a sol-gel process, and the ideal percentage of Sm³⁺ was evaluated for bioimaging applications. By XRD, a formation of Gd₂O₃ cubic materials was observed, and TEM shows that Gd₂O₃ particles are dispersed in a SiO₂ lattice. PLE spectra confirm the main absorption bands in the UV region and emission shows the most efficient excitation at 275 nm. PL results reveal the incorporation of Sm³⁺ in Gd₂O₃ structures and lead to the understanding of the efficient energy transfer between Gd³⁺ and Sm³⁺ in the materials. The mechanism is proposed and discussed. CIE plotting shows color coordinates in the orange and red regions, mainly dependent on the excitation source. Sm³⁺ positions in Gd₂O₃ are discussed using the results obtained in the emission spectra. Materials presented high lifetime values, between 1.53 and 1.82 ms. The phosphors show tunability properties and better performance as red phosphors when excited at 275 nm. Cell viability was performed and the material is non-toxic. The materials were evaluated as biological markers, and present fluorescence under rhodamine emission filters. SiO₂-Gd₂O₃:Sm³⁺ demonstrates a good viability index and co-localizes with membrane cell markers, showing a promising material for cell tracking. The material also demonstrates potential for cancer targeting.     

Photoluminescence properties of Pr3+ ion-doped YInGe2O7 phosphor under an ultraviolet irradiation

Pr³⁺ ion-doped YinGe₂O₇ phosphors are synthesized by a vibrating milled solid state reaction. There is a red shift for the excitation peak for the charge transfer transition between In³⁺ and O^2- ion because the numbers of oxygen vacancies change the structure, which leads to a change in the crystal field. The results indicate that the emission spectra for the YinGe₂O₇:Pr samples under an excitation of 263 nm exhibit two dominant peaks at 486 and 604 nm, which are respectively assigned to the ³P₀→³H₄ and ¹D₂→³H₄ transitions. The chromaticity coordinate for (Y_1?xPr_x)InGe₂O₇ phosphors varies with the Pr³⁺ doping concentration, from white, to greenish, to blueish. This has a potential application as a white light emitting phosphor for ultraviolet light-emitting diodes.     

Synthesis and luminescence properties of novel Y2Si4N6C:Sm3+ carbonitride phosphor

Novel Y₂Si₄N₆C:Sm³⁺ phosphors for white light-emitting diodes (w-LEDs) were prepared by a carbothermal reduction and nitridation method. X-ray diffraction (XRD) and photoluminescence spectra were utilized to characterize the structure and luminescence properties of the as-synthesized phosphors. The emission spectrum obtained by excitation into 291 nm contains exclusively the characteristic emission of Sm³⁺ at 568, 607 and 654 nm which correspond to the transitions from ⁴G_5/2 to ⁶H_5/2, ⁶H_7/2, and ⁶H_9/2 of Sm³⁺, respectively. The strongest one is located at 607 nm due to ⁴G_5/2–⁶H_7/2 transition of Sm³⁺. It was found that concentration quenching occurred as a result of dipole–dipole interaction according to Dexter's theory. The temperature dependence of photoluminescence properties was investigated from 25 to 300 °C and the prepared Y₂Si₄N₆C:Sm³⁺ phosphors showed superior thermal quenching properties.     

Red-emitting enhancement of Bi4Si3O12:Sm3+ phosphor by Pr3+ co-doping for White LEDs application

In this account, Bi₄Si₃O₁₂:Sm³⁺ and (Bi₄Si₃O₁₂:Sm³⁺, Pr³⁺) red phosphors were prepared by solution combustion method fueled by citric acid at 900 °C for 1 h. The effects of co-doping Pr³⁺ ions on red emission properties of Bi₄Si₃O₁₂:Sm³⁺ phosphors, as well as the mechanism of interaction between Sm³⁺ and Pr³⁺ ions were investigated by various methods. X-ray diffraction (XRD) and Scanning electron microscopy (SEM) revealed that smaller amounts of doped rare earth ions did not change the crystal structure and particle morphology of the phosphors. The photoluminescence spectroscopy (PL) indicated that shape and position of the emission peaks of (Bi₄Si₃O₁₂:Sm³⁺, Pr³⁺) phosphors excited at λ_ex=403 nm were similar to those of Bi₄Si₃O₁₂:Sm³⁺ phosphors. The strongest emission peak was recorded at 607 nm, which was attributed to the ⁴G_5/2→⁶H_7/2 transition of the Sm³⁺ ion. The photoluminescence intensities of Bi₄Si₃O₁₂:Sm³⁺ phosphors were significantly improved by co-doping with Pr³⁺ ions and were maximized at Sm³⁺ and Pr³⁺ ions doping concentrations of 4 mol% and 0.1 mol%, respectively. The characteristic peaks of Sm³⁺ ions were displayed in the emission spectra of (Bi₄Si₃O₁₂:Sm³⁺, Pr³⁺) phosphors excited at respectively λ_ex=443 nm and λ_ex=481 nm (Pr:³H₄→³P₂, ³H₄→³P₀). This indicated the existence of Pr³⁺→Sm³⁺ energy transfer in (Bi₄Si₃O₁₂:Sm³⁺, Pr³⁺) phosphors.     

Synthesis and photoluminescence enhancement of Ca3Sr3(VO4)4:Eu3+ red phosphors by co-doping with La3+

In this study, a series of red-emitting Ca₃Sr₃(VO₄)₄:Eu³⁺ phosphors co-doped with La³⁺ was prepared using the combustion method. The microstructures, morphologies, and photoluminescence properties of the phosphors were investigated. All Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ samples synthesized at temperatures greater than 700 ℃ exhibited the same standard rhombohedral structure of Ca₃Sr₃(VO₄)₄. Furthermore, the Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ phosphor was effectively excited by near-ultraviolet light of 393 nm and blue light of 464 nm. The strong excitation peak at 464 nm corresponded to the ⁷F₀→⁵D₂ electron transition of Eu³⁺. The strong emission peak observed at 619 nm corresponded to the ⁵D₀→⁷F₂ electron transition of Eu³⁺. Co-doping with La³⁺ significantly improved the emission intensity of Ca₃Sr₃(VO₄)₄:Eu³⁺ red phosphors. The optimum luminescence of the phosphor was observed at Eu³⁺ and La³⁺ concentrations of 5% and 6%, respectively. Moreover, co-doping with La³⁺ also improved the fluorescence lifetime and thermal stability of the Ca₃Sr₃(VO₄)₄:Eu³⁺ phosphor. The CIE chromaticity coordinate of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺, 0.06La³⁺ was closer to the NTSC standard for red phosphors than those of other commercial phosphors; moreover, it had greater color purity than that of all the samples tested. The red emission intensity of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺, 0.06La³⁺ at 619 nm was ~1.53 times that of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺ and 2.63 times that of SrS:Eu²⁺. The introduction of charge compensators could further increase the emission intensity of Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ red phosphors. The phosphors synthesized herein are promising red-emitting phosphors for applications in white light-emitting diodes under irradiation by blue chips.     

Spectral pure RGB up-conversion emissions in self-assembled Gd2O3: Yb3+, Er3+/Ho3+/Tm3+ 3D hierarchical architectures

Self-assembled three-dimensional Yb³⁺(Ln = Er, Ho, Tm) co-doped Gd₂O₃ up-converted (UC) phosphors were synthesized by a facile co-precipitation method, and their morphologies and microstructures were investigated by scanning electron microscope (SEM) and transmission electron microscope (TEM) analysis. Under the excitation at 980 nm, spectral pure three primary colors red, green and blue (RGB) emissions were respectively achieved in Yb³⁺/Er³⁺, Yb³⁺/Ho³⁺ and Yb³⁺/Tm³⁺ co-doped Gd₂O₃ phosphors, in which spectral color purities were tuned by adjusting the doping concentration, annealing temperature, excitation power density and the pulse-width of 980 nm laser. These results provide deeper insights into modulating spectral color purities of up-converted emission, and the potential applications of spectrally pure RGB up-converted materials in fingerprint recognition and multi-color printing were also investigated.     

Synthesis and photoluminescence properties of Sr3(PO4)2:Re3+, Li+ (Re = Eu,Sm) red phosphors for white light-emitting diodes

Sr₃(PO₄)₂:Re³⁺, Li⁺ (Re = Eu, Sm) red phosphors were prepared via a high temperature solid state reaction, and their structure and luminescence properties were investigated. X-ray diffraction patterns indicate that the phase of as-prepared samples is in good agreement with standard Sr₃(PO₄)₂ structure. Under 395 nm excitation, the emission of Sr₃(PO₄)₂:Eu³⁺ consists of a strong peak centered at 622 nm and two weak peaks centered at 598 nm and 660 nm, which correspond to ⁵D₀→⁷F₂, ⁵D₀→⁷F₁ and ⁵D₀→⁷F₃ transitions, respectively. Also, the emission spectrum of Sr₃(PO₄)₂:Sm³⁺ shows three main peaks at 568 nm, 603 nm and 651 nm, which are attributed to ⁴G_5/2→⁶H_I/2 (I = 5, 7, 9) transitions of Sm³⁺. Furthermore, luminescence properties of Sr₃(PO₄)₂:Re³⁺, Li⁺ (Re = Eu, Sm) samples are enhanced significantly by Li⁺ ions doping as charge compensator. Results indicate that as-prepared Sr₃(PO₄)₂:Re³⁺, Li⁺ (Re = Eu, Sm) could be the potential red phosphors used in white light-emitting diodes.     

Synthesis and characterization of Eu3+-doped C12H18Ca3O18 phosphor

A series of Eu³⁺-doped C₁₂H₁₈Ca₃O₁₈ phosphors were synthesized through a facile hydrothermal method and the properties of as-prepared phosphors were explored by X-ray diffractometer (XRD), scanning electron microscope (SEM), and photoluminescence (PL) spectrometer. The exploration results indicated that the C₁₂H₁₈Ca₃O_18:Eu³⁺ had been successfully synthesized. The morphology of C₁₂H₁₈Ca₃O_18:Eu³⁺ was a strip with the size of 100–4000 nm × 50–400 nm × 50–200 nm and the ratio of length to width of 2–80. The strongest emission peak of C₁₂H₁₈Ca₃O_18:Eu³⁺ around 620 nm was ascribed to ⁵D_o→⁷F₂ transition of Eu³⁺, and the peaks centered at 590, 653 and 694 nm respectively corresponded to ⁵D_o →⁷F₁, ⁷F₃, and ⁷F₄ transitions. C₁₂H₁₈Ca₃O_18: Eu³⁺ gave the red light emission, as indicated by color coordinate analysis. The photoluminescence intensity of the phosphors prepared under the Eu³⁺ concentration of 6% was the highest. The crystal structure of C₁₂H₁₈Ca₃O_18:Eu³⁺ was changed after europium ions occupied the lattice position of calcium ions. Europium ion could displace calcium arbitrarily. As a new kind of matrix, calcium citrate possesses the properties of both organic and inorganic compounds and the luminescent C₁₂H₁₈Ca₃O₁₈: x Eu³⁺ particles may be applied in biological fluorescent tags and luminescent materials.     

Photoluminescence properties and thermal stability of samarium-doped barium phosphate phosphors

In this paper, Sm³⁺-doped Ca₆BaP₄O₁₇ phosphors were synthesized via a conventional solid-state reaction method. Orange-red emission was observed from these phosphors under near-ultraviolet (UV) excitation at 405 nm. The luminescence properties of the obtained phosphors were characterized. The Ca₆BaP₄O₁₇:Sm³⁺ phosphor can be efficiently excited by near-UV and blue light, and their emission spectrum consists of three emission peaks, at 567, 602, and 650 nm, respectively. The thermal stability of Ca₆BaP₄O₁₇:Sm³⁺ phosphors was investigated systematically and corresponding mechanisms were proposed. Based on the results, the as-prepared Ca₆BaP₄O₁₇:Sm³⁺ phosphors are promising orange-red-emitting phosphors for near-UV-based white light-emitting diodes.     

Tunable emission of single-phased NaY(WO4)2:Sm3+ phosphor based on energy transfer

A series of NaY(WO₄)₂:Sm³⁺ phosphors were prepared by high temperature solid state reaction. When excited by ultraviolet and blue light, their emission spectra cover entirely visible light region, due to intrinsic luminescence of WO₄^2- group as well as Sm³⁺ 4f-4f transitions. White light emission was obtained from NaY_0.99Sm_0.01(WO₄)₂ phosphor under radiation of 265 nm UV light, and intense yellow and red emission from ⁶H_{J(J=5/2, 7/2, 9/2)} transitions were observed when pumped Sm^{3+ 4}G_5/2 by 405 nm blue light. With incorporation of Sm³⁺ into NaY(WO₄)₂ host, higher-level emission from Sm³⁺ at 650 nm was generated by energy transfer from WO₄^2- to Sm³⁺ under excitation of 265 nm. The corresponding energy transfer mechanism was demonstrated to be a dipole-dipole interaction. In addition, tunable emission from blue to white and, finally, to red was realized by increasing Sm³⁺ doping concentration. The band gap of NaY(WO₄)₂ calculated from diffuse reflection spectra indicates a semiconducting character. All these results show that NaY_1−xSm_x(WO₄)₂ phosphor provides promising application for conversion of frequencies emitted by UV or blue LEDs.     

Efficient sensitization of Tb3+ emission by Dy3+ in CaMoO4 phosphors: Energy transfer,tunable emission and optical thermometry

Dy³⁺/Tb³⁺ codoped CaMoO₄ phosphors were synthesized by a simple sol–gel method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence spectroscopy. The energy transfer process of Dy³⁺→Tb³⁺ was confirmed by excitation and emission spectra and luminescence decay curves, and the energy transfer efficiency was also estimated. The results verified that the efficient emission of Tb³⁺ was sensitized by Dy³⁺ under the excitation of 354 nm, realizing tunable emission in CaMoO₄ phosphors. Furthermore, optical thermometry was achieved by the fluorescence intensity ratio between Tb³⁺: ⁵D₄→⁷F₅ (~546 nm) and Dy³⁺: ⁴F_9/2→⁶H_13/2 (~575 nm). It is expected that the investigated CaMoO₄ nanograins doped with Dy³⁺/Tb³⁺ have prospective applications in display technology and optical thermometry.     

LiCa3MgV3O12:Sm3+: A new high-efficiency white-emitting phosphor

A novel single-phased white-light-emitting phosphor Sm³⁺ doped LiCa₃MgV₃O₁₂ (LCMV) was developed. The LCMV host was one self-activated bluish-green emitting phosphor, which possessed an efficient excitation band in the 250–400?nm wavelength range and showed an intense broadband bluish-green emission with internal quantum efficiency (IQE) of 39%. Doping Sm³⁺ ions in to LCMV host induced tunable-color emissions, due to the energy transfer from [VO₄]^3? to Sm³⁺ ions. Importantly, under 340?nm excitation, the LCMV:Sm³⁺ can emitted bright white light by combining the self-activated luminescence of LCMV host and the red emissions of Sm³⁺ ions, and the IQE of the white-emitting composition-optimized LCMV:0.01Sm³⁺ phosphors reached up to 45%. These white-emitting LCMV:Sm³⁺ phosphors have potential applications in white light-emitting diodes and optical display devices.     

Improvement of photoluminescence properties of Ce3+- doped CaSrAl2SiO7 phosphors by charge compensation with Li+ and Na+

In this work, we prepared CaSr_1-xAl₂SiO₇:xCe³⁺ (0.03 ≤ x ≤ 0.12) and CaSr_0.94Al₂SiO₇:0.03Ce³⁺,0.03 M⁺ (M⁺ = Li⁺ and Na⁺) phosphors via solid-state reaction method. Structural and photoluminescence (PL) properties of the phosphors were also investigated. The prepared phosphors formed an orthorhombic crystal structure with the P2₁2₁2₁ space group. CaSr_1-xAl₂SiO₇:xCe³⁺ phosphors were effectively excited by near-ultraviolet (UV) light (345 nm), which is suitable with the emission of near-UV light emitting diode chips. A broad blue emission (402 nm) was detected in CaSr_1-xAl₂SiO₇:xCe³⁺ and CaSr_0.94Al₂SiO₇:0.03Ce³⁺,0.03 M⁺ phosphors; this was attributed to the 4f⁰5d¹ → 4f¹ transition of Ce³⁺. To maintain charge equilibrium, charge compensators, such as monovalent Li⁺ and Na⁺ ions, were doped into the CaSr_0.97Al₂SiO₇:0.03Ce³⁺ phosphor, significantly improving its PL properties. The strongest emission intensity was achieved in CaSr_0.94Al₂SiO₇:0.03Ce³⁺,0.03Li⁺ phosphor. Addition of Li⁺ charge compensator was highly effective in improving PL properties of CaSr_0.97Al₂SiO₇:0.03Ce³⁺ phosphors.     

Photoluminescence, γ-irradiation and X-ray induced luminescence studies of Sm3+-doped oxyfluorosilicate glasses and glass-ceramics

Sm³⁺-doped oxyfluorosilicate glasses were fabricated through traditional melt quenching technique. After the heat treatment of the prepared glass, transparent SrF₂ nanocrystalline glass-ceramics (GC) were obtained. The amorphous nature of the prepared glasses and crystalline phase (SrF₂) of the GC were confirmed by XRD analysis. Abbe number was calculated for all the prepared glasses by measuring refractive index at different wavelengths. In the framework of Judd-Ofelt (JO) theory, the JO intensity parameters were obtained from the absorption spectra of 1.0 mol% Sm₂O₃-doped glass. The photoluminescence spectrum was recorded with 401 nm excitation. From the analysis of optical spectra and JO parameters, the radiative properties like radiative transition probabilities, branching ratios and radiative lifetimes for the fluorescent levels of Sm³⁺ ions were determined. The effect of γ-irradiation on luminescence properties and X-ray induced luminescence properties were also studied. The emission intensity was increased for GC where as it decreases with increase of γ-irradiation dosages. There are no noticeable changes in the position as well as intensity in photoluminescence and X-ray induced luminescence spectra for GC sample but after the γ-irradiation, the emission intensity was decreased moderately. The luminescence decay profiles for ⁴G_5/2 level were recorded and it is changed from exponential to non-exponential nature for higher Sm³⁺ ion concentrations. The decay profiles which exhibit non-exponential nature are well fitted to the Inokuti-Hirayama model and determined the energy transfer parameters. By using the integrating sphere, the quantum yield values were obtained for all the prepared glasses. The detailed study of the present glasses reveals that these glasses could be useful for radiation shielding and scintillation applications.     

Improved photoluminescence,thermal stability and temperature sensing performances of K+ incorporated perovskite BaTiO3:Eu3+ red emitting phosphors

K⁺ ions incorporated perovskite Ba_(1−x)TiO₃:x Eu³⁺ red emitting phosphors synthesized via facile solid -state reaction method has been investigated in the current study. The photoluminescence and decay time behavior of Ba_(1−x−y)TiO₃:x Eu³⁺,yK⁺ phosphors are investigated as a function of Eu³⁺, K⁺ concentration and temperature. An intense and sharp emission peak at 615 nm was exhibited by the phosphors upon excitation at 397 nm (⁷F₀→⁵L₆). It can be credited to the hypersensitive electric dipole transition ⁵D₀→⁷F₂, which confirms that Eu³⁺ ions are located at non-centrosymmetric site of the host. The incorporation of K⁺ ions in optimized Ba_0.95TiO₃:0.05 Eu³⁺ phosphor resulted in a remarkable enhancement of photoluminescence intensity by 2.33 times as compared to bare one. The Ba_0.89TiO₃:0.05 Eu³⁺, 0.06 K⁺ phosphors were found to observe good temperature sensing along with adequate thermal stability even at 427 K. Furthermore, the photometric parameters have been also studied which are strongly facilitate the prepared ceramic samples as suitable for potential application in lighting.     

Charge transfer band excitation of La3NbO7:Sm3+ phosphors induced abnormal thermal quenching toward high-sensitivity thermometers

Different luminescent behaviors of La₃NbO₇:Sm³⁺ phosphors under the excitations of charge transfer band (CTB, 250 nm) and featured absorption peak (⁶H_5/2 → ⁴H_7/2, 405 nm) of Sm³⁺ ions were demonstrated. Under the excitation wavelength of 405 nm, the optimal La₃NbO₇:0.1Sm³⁺ phosphor exhibited an orange-red emission while the chromatic coordinate was found to be (0.609, 0.387), which also showed the excellent thermal performance, exhibiting its emission intensity of about 90.67% at 423 K with respect to 303 K. In the case of CTB excitation, the La₃NbO₇:0.1Sm³⁺ phosphor emitted an orange-yellow region with the chromaticity coordinate of (0.540, 0.443), and the emission intensity was stronger than the above one (λ_ex =405 nm) even though the optimized sample would be changed to the La₃NbO₇:0.05Sm³⁺ phosphor. With the increase of temperature, the obtained sample revealed an abnormal thermal quenching phenomenon between the emission peak of the host material and the emission transition of ⁴G_5/2 → ⁶H_9/2 under the excitation wavelength of 250 nm, which could be suggested to turn into a pair of thermal-couple levels. Therefore, the sensing sensitivity of the obtained sample was further investigated based on the fluorescence intensity ratio theory. Eventually, the absolute and relative sensing sensitivities of the La₃NbO₇:0.01Sm³⁺ phosphor were estimated to be as high as 5.379 × 10⁻² K⁻¹ and 1.60% K⁻¹, respectively.     

Down-conversion from Er3+-Yb3+ codoped CaMoO4 phosphor: A spectral conversion to improve solar cell efficiency

The present paper focuses on near infrared (NIR) down-conversion photoluminescence (PL) properties by studying the energy transfer mechanism between Er³⁺ and Yb³⁺ in CaMoO₄:Er³⁺, Yb³⁺ phosphors. We have successfully synthesized a series of Er³⁺ doped and Yb³⁺ codoped CaMoO₄ phosphors by hydrothermal method. The down-conversion of Er³⁺-Yb³⁺ combination with CaMoO₄ phosphor is designed to overcome the energy losses due to spectral mismatch when a high energy photon is incident on the Si-solar cell. The XRD, FESEM, EDX, PL, UV–Vis, Lifetime measurements were carried out to characterize the prepared down-converting phosphors. The crystallinity and surface morphology were studied by X-ray diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM) techniques. The down-conversion PL spectra have been studied using 380 nm excitation wavelength. The Er³⁺ doped phosphors exhibit hypersensitive emission at 555 nm in the visible region due to ⁴S_3/2→⁴I_15/2 transition. The addition of Yb³⁺ into Er³⁺ doped CaMoO₄ attribute an emission at 980 nm due to ²F_5/2→²F_7/2 transition. The decrease in emission intensity in visible region and increase in NIR region reveals the energy transfer from Er³⁺ to Yb³⁺ through cross relaxation. The UV–Vis–NIR spectra shows the strong absorption peak around 1000 nm due to Yb³⁺ ion. The lifetime measurement also reveals the energy transfer from Er³⁺ to Yb³⁺ ions. The maximum value of energy transfer efficiency (ETE) and corresponding theoretical internal quantum efficiency are estimated as 74% and 174% respectively.     

Synthesis and photoluminescence properties of the high-brightness Eu3+-doped Sr3Y(PO4)3 red phosphors

A series of red-emitting phosphors Eu³⁺-doped Sr₃Y(PO₄)₃ have been successfully synthesized by conventional solid-state reaction, and its photoluminescence properties have been investigated. The excitation spectra reveal strong excitation bands at 392 nm, which match well with the popular emissions from near-UV light-emitting diode chips. The emission spectra of Sr₃Y(PO₄)₃:Eu³⁺ phosphors exhibit peaks associated with the ⁵D₀ → ⁷F_J (J = 0, 1, 2, 3, 4) transitions of Eu³⁺ and have dominating emission peak at 612 nm under 392 nm excitation. The integral intensity of the emission spectra of Sr₃Y_0.94(PO₄)₃:0.06Eu³⁺ phosphors excited at 392 nm is about 3.4 times higher than that of Y₂O₃:Eu³⁺ commercial red phosphor. The Commission Internationale de l’Eclairage chromaticity coordinates, the quantum efficiencies and decay times of the phosphors excited under 392 nm are also investigated. The experimental results indicate that the Eu³⁺-doped Sr₃Y(PO₄)₃ phosphors are promising red-emitting phosphors pumped by near-UV light.     

Yellow-emitting (Tb1−xCex)3Al5O12 phosphor powder and ceramic (0≤x≤0.05): Phase evolution,photoluminescence, and the process of energy transfer

(Tb_1-xCe_x)₃Al₅O₁₂ yellow phosphors (0≤x≤0.05) were calcined from their coprecipitated carbonate precursors, and the effects of the temperature and atmosphere (air and H₂) of calcination on the sequence of phase evolution and the characteristics of the powders were investigated in detail. The activation energy for the crystallite growth during calcination was estimated to be ~39 kJ/mol. The powder calcined at 1000 °C showed good reactivity and was sintered into a ceramic plate of ~97% dense (average grain size: ~1.3 µm) in a H₂/Ar gas mixture at the relatively low temperature of 1500 °C. The phosphors simultaneously exhibit the 4f⁸→4f⁷5d¹, ⁷F₆→⁵D₃ and ⁷F₆→⁵D₄ excitations of Tb³⁺ and the 4f¹→5d¹ excitation of Ce³⁺ when monitoring the yellow emission of Ce³⁺ at 560 nm, suggesting the presence of efficient Tb³⁺→Ce³⁺ energy migration. The optimal Ce³⁺ content for luminescence was found to be x=0.015 and 0.01 under the direct excitation of Ce³⁺ and through Tb³⁺→Ce³⁺ energy transfer, respectively, and concentration quenching of luminescence was analyzed to be resulted from exchange interaction. Luminescence features of the phosphors, including excitation, emission, quantum yield, fluorescence lifetime, color coordinates and color temperature, were thoroughly investigated against the processing temperature and Ce³⁺ content, with an in-depth discussion on the process of energy transfer among the optically active Tb³⁺ and Ce³⁺ ions. The materials may find application in blue-light excited white LEDs.     

Characterizations and optical properties of Sm3+-doped Sr2SiO4 phosphors

Optical properties of samarium-doped strontium orthosilicate for near ultra-violet excitation are studied. Sr₂SiO₄:Sm³⁺ phosphor is synthesized by using the solid-state reaction method. The structure and physical properties of the phosphor are characterized by using X-ray diffractometer, scanning electron microscope, UV–visible spectrophotometer, high-resolution secondary ion mass spectrometer, and X-ray photoelectron spectrometer. Optical properties are studied by taking excitation and emission spectra. A strong red-orange luminescence corresponding to ⁴G_5/2 → ⁶H_7/2 transition of Sm³⁺ for near ultra-violet excitation is observed. It is found that Sr₂SiO₄:Sm³⁺ is a red-orange emitting phosphor and has higher efficiency for the operation with near ultra-violet excitation.