Hot pressing diffusion bonding of a titanium alloy to a stainless steel with an aluminum alloy interlayer

The probability and appropriate processing parameters of hot pressing diffusion bonding (HP–DW) of a titanium alloy (TC4) to a stainless steel (1Cr18Ni9Ti) with an aluminum alloy (LF6) interlayer have been investigated. The microstructure of the bonded joints has been observed by optical microscopy, SEM, XRD and EDX, and the main factors affecting hot pressing and diffusion bonding process were analyzed. The results showed that atom diffused well and no intermetallic compound or other brittle compounds appeared at optimum parameters. The fracture way of joints was ductile fracture. With the increment of bonding temperature, large number of intermetallic compounds such as FeAl₆, Fe₃Al, FeAl₂ which were brittle appeared along the interface between the stainless steel and the aluminum alloy interlayer, as a result, the quality of joints was decreased significantly and the fracture way of joints was brittle fracture.     

Diffusion bonding between Ti‐6Al‐4V alloy and interstitial free steel

This work deals with diffusion bonded joints between Ti–6Al–4V alloy and interstitial free (IF) steel at different temperatures under a pressure of 5 MPa for 30 min. The effect of bonding temperature on the microstructure and mechanical properties of the joint interface was investigated using optic microscopy, a scanning electron microscope (SEM) equipped with X‐ray energy dispersive spectrometer (EDS) and shear strength measurements. The intermetallic phases such as FeTi and Fe₂Ti occurred at the interface of bonded specimens. In addition, it was seen that shear strength of bonded specimens decreased with increasing temperature due to growing intermetallics.     

Evaluation on diffusion bonded joints of TiAl alloy to Ti3SiC2 ceramic with and without Ni interlayer: Interfacial microstructure and mechanical properties

Diffusion bonding of TiAl alloys and Ti₃SiC₂ ceramics were carried out in a vacuum atmosphere. The microstructures and mechanical properties of the bonded joints were investigated. Results showed that three coherent intermetallic layers formed in the TiAl/Ti₃SiC₂ joints during bonding process. The compound layer adjacent to Ti₃SiC₂ substrate was indicated to be Ti₅Si₃, in which brittle fracture of the joints took place during shear strength test. The properties of diffusion bonded joints were greatly improved attributed to the formation of a good transition in the joint as well as the relief of the residual stress when using Ni foil as interlayer. Formation mechanisms of the compound layers during bonding process were discussed. Shear test results showed that the maximum shear strength reached 52.3 MPa. Corresponding fractograph indicated that the crack mainly propagated along Ti₃SiC₂ substrate adjacent to the bonding zone, accompanied with an intergranular and transgranular fracture mode.     

TiAl合金与高温合金的扩散焊接头组织及性能

采用直接扩散焊和加中间层的扩散焊方法进行了TiAl合金和高温合金异种材料组合的连接实验。在1000℃/20MPa/1h规范下直接扩散焊获得的TiAl/GH2036接头组织中存在大量未焊合的孔洞,接头室温剪切强度平均值仅有16MPa。采用Ti-Zr-Cu-Ni合金作为中间层在935℃加压3MPa保温10min和1h进行了TiAl/GH3536组合接头的液相扩散焊,获得的扩散焊缝中含有Ti3Al,NiTi等多种物相,中间层合金与两侧母材发生作用形成了具有一定厚度的反应层。在935℃/3MPa/1h规范下获得了与两侧母材结合良好的无缺陷扩散焊接头,室温剪切强度达到125MPa。     

Mikrostruktur und mechanische Eigenschaften der reibgeschweißten γ‐TiAl‐Feingusslegierung Ti‐47Al‐3.5(Mn+Cr+Nb)‐0.8(B+Si)

Microstructure and mechanical properties of friction welded γ‐TiAl based alloy Ti‐47Al‐3.5(Mn+Cr+Nb)‐0.8(B+Si) in investment cast condition. This paper describes properties of joints produced by friction welding of the intermetallic γ‐TiAl based alloy Ti‐47Al‐3.5(Mn+Cr+Nb)‐0.8(B+Si) in investment cast and hot‐isostatically pressed condition. The effect of friction welding parameters on microstructure and local properties are examined and discussed. It is found that the properties of the joint are essentially affected by properties of as‐cast Ti‐47Al‐3.5(Mn+Cr+Nb)‐0.8(B+Si) base material, both at room temperature and 700 °C.     

中间层Ni对TC4/2A14异种金属搅拌摩擦焊接头组织和性能的影响

目的 添加0.05 mm厚的Ni箔作为中间层,对3 mm厚的TC4钛合金和2A14铝合金进行搅拌摩擦焊,分析Ni对接头力学性能的影响。方法 采用扫描电镜、EDS能谱及XRD衍射等微观表征分析方法,对焊接接头的断口形貌、成分进行分析,探究Ni箔对焊接接头力学性能的影响。结果 由于钛合金和铝合金存在较大的物理化学性能差异,Ti/Al异种金属焊接性较差,界面容易产生TiAl3、TiAl、Ti3Al等金属间化合物,其中脆性相TiAl3对接头性能的影响最大,会导致综合力学性能下降。当加入中间层材料Ni后,由于Ni与Al晶体结构均属于面心立方,因此Ni与Al的扩散系数大于Ti与Al的扩散系数,Ni和Al之间优先形成金属间化合物且弥散分布于焊缝中,从而缩短了Ti与Al之间的相互扩散时间,减少了TiAl3相的生成。结论 在未添加中间层材料时,接头平均抗拉强度为237.3 MPa,约为2A14铝合金母材抗拉强度的56.7%;当添加中间层Ni后,对焊缝中金属间化合物的种类和数量进行了调控,减少了对性能影响最大的TiAl3相的生成,接头平均抗拉强度达到285.3 MPa,为2A14铝合金母材抗拉强度的68%。     

An effective approach for bonding of TZM and Nb-Zr system:Microstructure evolution,mechanical properties,and bonding mechanism

A novel method of liquid metallic film(LMF)bonding was developed to join titanium zirconium molyb-denum alloy(TZM)and Nb-Zr alloy with a Ni interlayer.Using this method,a Ni-Zr liquid phase was formed by the eutectic reaction and then squeezed out from the gap due to a transient pressure,leaving an LMF.It not only achieved a reliable metallurgical bonding but also served as a transition layer between TZM and Nb-Zr alloy to reduce the mismatch between them thus further improving its performance.The bonding mechanism of the TZM and Nb-Zr system was discussed based on theoretical calculation and high-resolution microscopy analysis.The advantages of this method were established by comparing the microstructure and mechanical properties of LMF bonded joints with that of traditional contact-reaction brazing and direct diffusion bonding.Additionally,the feasibility of the LMF bonding method was also demonstrated by the reliable joining of other high-temperature and immiscible systems.     

Bonding W and W–Cu composite with an amorphous W–Fe coated copper foil through hot pressing method

A new method to bond W and W–Cu composite was developed. W and W–Cu composite were bonded by hot pressing method with an amorphous W–Fe coated copper foil as the interlayer. Effects of the interlayer on the microstructure and thermal conductivity of the bonded specimen were investigated. The results showed that bonding quality was improved by using the interlayer. First, metallurgical bonding between W and W–Cu composite was obtained owing to the diffusion of Fe and the crystallization of amorphous W in the coating of the interlayer. Furthermore, both the thermal conductivity and relative thermal conductivity of the bonded specimen were increased because of the malleability of the interlayer.     

Effect of gradient thermal distribution on butt joining of magnesium alloy to steel with Cu–Zn alloy interlayer by hybrid laser–tungsten inert gas welding

Experimental investigations on butt welding of magnesium alloy to steel by hybrid laser–tungsten inert gas (TIG) welding with Cu–Zn alloy interlayer are carried out. The results show that the gradient thermal distribution of hybrid laser–TIG welding, controlled by offset adjustment, has a noticeable effect on mechanical properties and microstructure of the joints. Particularly, at the offset of 0.2 mm, defect-free joints are obtained, and the tensile strength could attain a maximum value of 203 MPa. Moreover, the fracture of the joint with the 0.2 mm offset happens in the weld seam of Mg alloy instead of the Mg/Fe interface. Owning to the addition of the Cu–Zn alloy interlayer, a metallurgical bonding between Mg alloy and steel is achieved based on the formation of intermetallic compounds of CuMgZn and solid solutions of Cu and Al in Fe. Meanwhile, the same element distribution tendency of Fe and Al indicates the intimate interaction between Fe and Al in current experimental conditions.     

TC4合金TLP扩散焊的组织与性能

采用ＢＴｉ３５ＺｒＣｕＮｉ非晶箔中间层合金对ＴＣ４钛合金进行了瞬间液相扩散焊（ＴＬＰ）,对接头的组织和性能、元素分布情况进行了测试分析。结果表明,在合适的规范下所得ＴＬＰ接头组织为网蓝组织,强度达９０７ＭＰａ,断口分析表明,接头具有较好的韧性。     

Auswirkungen von statischen Langzeitglühungen auf Gefüge und mechanische Eigenschaften einer γ‐TiAl Basislegierung

Influence of long‐term ageing on microstructure and mechanical properties of a γ‐TiAl based alloy This work deals with the results of static annealing treatments (700 °C and 800 °C in air, up to 10.000 hours) conducted on a powder metallurgical processed Ti‐46.5at.%‐4at.%(Cr,Nb,Ta,B) alloy with a designed fully lamellar (DFL) microstructure. It is the aim of this work to discuss possible changes in microstructure and related changes in mechanical properties as a function of annealing time and temperature. After long‐term exposure it can be expected that amount, type and composition of constitutional phases have reached their thermodynamic equilibrium values. These experimental results were compared with theoretical considerations based on thermodynamic equilibrium calculations which provide baseline information upon amount, type and composition of constituting phases.     

Transient liquid phase bonding of Gamma Met PX: microstructure and mechanical properties

Abstract

An investigation of microstructural development and structure–property relationships of transient liquid phase (TLP) bonded current generation γ-TiAl alloy, known as Gamma Met PX, is presented. This joining technique employed a composite interlayer consisting of a non-melting constituent (TiAl alloy) and a liquid forming constituent (copper). The microstructures of the bonds, identified using light microscopy and scanning electron microscopy, are correlated with room temperature mechanical performance. These studies suggested that joints can retain properties similar (i.e. >90%) to that of the bulk material when employing a suitable composite interlayer, bonding conditions and post-bond heat treatment. Additionally, comparisons are drawn between wide gap TLP bonding of an earlier generation γ-TiAl alloy, Ti–48Al–2Cr–2Nb (at.-%), and wide gap TLP bonding of Gamma Met PX.     

The microstructure and mechanical properties of prolonged and lower temperature aged Fe–Ni–Mn–Mo–Ti–Cr maraging steel

In this study, the microstructure and mechanical properties of Fe–Ni–Mn–Mo–Ti–Cr maraging steel at low temperature and prolonged aging condition were investigated. Optical and scanning electron microscopy examinations, tensile and hardness tests were conducted to study the microstructure, aging behavior and mechanical properties of the cold‐rolled steel. The results showed that aging of cold rolled Fe–Ni–Mn–Mo–Ti–Cr maraging steel resulted in the formation of Mo rich and Ti rich Lave phase precipitates. Existence of many dislocation cores due to cold rolling and subsequently, low temperature aging caused to formation of uniform distribution of very fine precipitates. The presence of these precipitates increased the yield and ultimate tensile strengths but couldn't improve the uniform tensile ductility. This alloy showed ultra‐high fracture stress of about 1950 MPa with a negligible tensile elongation (about 2 %) at the peak aged condition. The fractographic studies indicated this alloy shows semi‐brittle fracture in the subsequent aging treatment.     

Diffusion bonding between Ti–6Al–4V alloy and ferritic stainless steel

In the present study, Ti–6Al–4V alloy was diffusion bonded to a ferritic stainless steel. The effect of bonding temperature on the microstructural development across the joint region was investigated. After diffusion bonding, microstructural analysis including metallographic examination, energy dispersive spectrograph (EDS) and shear strength was conduced. From the results, it was seen that bonding on the temperature was affecting the Fe and Ti mutual diffusion which controls the interface microstructure. The microstructure of the interface region was formed, consisting of Fe and Ti intermetallics.     

Mg/Zn/Al瞬间液相过冷连接界面的组织与性能研究

采用瞬间液相过冷连接方法对AZ31镁合金/锌中间层/5083铝合金进行连接,利用SEM、XRD、拉伸实验机和微观硬度计对结合界面的微观组织、力学性能进行了表征。结果表明,以锌作中间层,采用瞬间液相过冷连接可以实现AZ31镁合金与5083铝合金的有效连接,接头的最高抗拉强度可以达到38.5MPa,随着低温扩散保温时间的延长,扩散层厚度随之增加,接头的抗拉强度也随之升高;接头的拉伸断口属于脆性断裂,结合界面形成了MgZn2和少量的Mg17Al12金属间化合物;结合界面的微观硬度最高达170。     

An investigation on microstructure and mechanical properties of Al7075 to Ti–6Al–4V Transient Liquid Phase (TLP) bonded joint

Transient Liquid Phase (TLP) bonding of two dissimilar alloys Al7075 and Ti–6Al–4V has been done at 500 °C under 5 × 10⁻⁴ torr. Cu was electrodeposited on Al7075 and Ti–6Al–4V surfaces, 50 μm thick Sn–4Ag–3.5Bi film was used as interlayer and bonding process was carried out at several bonding times. The microstructure of the diffusion bonded joints was evaluated by Light Optical Microscopy (LOM), Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS). The eutectic and intermetallic compounds formation along Al7075 grain boundaries and Ti/Al interface such as θ(Al₂Cu), TiAl and Ti₃Al were responsible for joint formation at the aluminum and titanium interfaces. Microhardness and shear strength tests were used to investigate the mechanical properties of the bonds. Hardness of the joints increased with increasing bonding time which can be attributed to the intermetallics formation at the interface. The study showed that the highest bond strength was 36 MPa which was obtained for the samples joined for 60 min.     

Ti/Nb作中间层脉冲加压扩散连接TiC金属陶瓷与不锈钢

用Ti/Nb作中间层,在温度890℃、时间4~12min、脉冲压力2~10MPa、频率f=0.5Hz、恒压10MPa下,对TiC金属陶瓷和304不锈钢(304SS)进行脉冲加压与恒压扩散焊,获得了牢固的固相扩散焊接头。通过扫描电镜SEM、能谱EDS、X射线衍射XRD与剪切性能测试,对接头的显微组织、界面产物与强度进行分析。结果显示:两种接头的界面物相相似,主要有σ相,(β-Ti,Nb)与α+β-Ti固溶体。连接时间10min时,恒压下的TiC/304SS接头抗剪强度为55.6MPa,而脉冲加压下的接头抗剪强度达110MPa。恒压下接头断裂方式为TiC陶瓷断裂,而脉冲压力下接头断裂方式为TiC陶瓷与界面产物间交替进行的混合断裂。     

Vacuum diffusion bonding of TiB2 cermet to TiAl based alloys

Abstract

Vacuum diffusion bonding of TiB₂ cermet to TiAl based alloys was carried out at 1123 – 1323 K for 0.6 – 3.6 ks under 80 MPa. The microstructural analyses indicate that a compound Ti(Cu, Al)₂ is formed in the interface of the TiB₂ /TiAl joints, and the width and quantity of the Ti(Cu, Al)₂ compound increase with the increase of the bonding temperature and bonding time. The experimental results show that the shear strength of the diffusion bonded TiB₂ /TiAl joint is 103 MPa, when TiB₂ cermet is bonded to TiAl based alloy at 1223 K for 1.8 ks under 80 MPa.     

Direct Friction Welding of TiAl Alloy to 42CrMo Steel Rods

The effect of post-weld heat treatment (PWHT) on the mechanical properties and microstructure of direct friction-welded joint between TiAl alloy and 42CrMo steel rods was investigated in this paper. It was found that solid joint between TiAl alloy and 42CrMo steel could be obtained without adding interlayer. After PWHT at 580°C for 2 h, the tensile strength of the joint reached 405 MPa, and fracture happened through the TiAl alloy substrate with quasi-cleavage features. The tempered sorbite formed near the interface, improving the joint strength significantly. It was found that TiFe₂, TiAl, and small amount of TiC brittle phases formed at the interface, and the interfacial layer was as thin as 2–5 µm. The precipitated phases were 1 µm in average size, and distributed discontinuously at the interface.     

Al2O3/Ti6Al4V diffusion bonding joints using Ag–Cu interlayer

Ceramic materials, such us alumina, are widely used for wear resistant and industrial components as in aircraft applications. On the other hand, Ti6Al4V is commonly used for aeronautical applications, due to its superplasticity, low weight and high mechanical resistance but has poor wear resistance because of its low resistance to plastic shearing. For these reasons numerous techniques have been developed to improve its wear resistance including joining to ceramic materials. Ceramics and alloys can be joined by several different processes and the use of an interlayer can further facilitate this process. In the present work Al₂O₃ and Ti6Al4V alloy have been diffusion bonded using a (Ag–Cu) interlayer. Identification of intermetallic phases formed within the bonded region enables the mechanical behaviour of the joints to be explained. These intermetallic phases are related to the bonding conditions applied (750 °C, 3 MPa with bonding times varied from 10 to 60 min).