Preparation and electrochemistry of NiO/SiNW nanocomposite electrodes for electrochemical capacitors

This paper studies nickel oxide/silicon nanowires (NiO/SiNWs) as composite thin films in electrodes for electrochemical capacitors. The SiNWs as backbones were first prepared by chemical etching, and then the Ni/SiNW composite structure was obtained by electroless plating of nickel onto the surface of the SiNWs. Next, the NiO/SiNW nanocomposites were fabricated by annealing Ni/SiNW composites at different temperatures in an oxygen atmosphere. Once the electrodes were constructed, the electrochemical behavior of these electrodes was investigated with cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). In 2 M KOH solution, the electrode material was found to have novel capacitive characteristics. Finally, when the NiO/SiNW composites were annealed at 400 °C, the maximum specific capacitance value was found to be as high as 681 F g⁻¹ (or 183 F cm⁻³), and the probing of the cycling life indicated that only about 3% of the capacity was lost after 1000 charge/discharge cycles. This study demonstrated that NiO/SiNW composites were the optimal electrode choice for electrochemical capacitors.     

Preparation, electrochemical characterization and charge–discharge of reticulated vitreous carbon/polyaniline composite electrodes

Polyaniline was electrodeposited onto reticulated vitreous carbon – RVC – in order to obtain a tridimensional composite electrode. Three variations of these electrodes were analysed: a small-anion-doped polyaniline (RVC/Pani), a polyanion-doped polyaniline (RVC/PaniPSS) and a bi-layer type formed by an inner layer of the first electrode and an outer layer of the second one (RVC/Pani/PaniPSS). These composites were characterized by cyclic voltammetry, scanning electronic microscopy and electrochemical impedance spectroscopy. Photomicrographies, voltammetric profiles and impedance data pointed to different morphological and electrochemical characteristics for polyaniline doped with small or large anions, and a mixed behavior for the bi-layer electrodes. Charge–discharge tests for these tridimensional (3D) electrodes, employed as the cathode in lithium batteries, indicated better performance for the RVC/Pani electrode. These RVC composites presented higher specific capacities when compared with those obtained for Pani deposited onto bidimensional substrates.     

Electrochemically fabricated polyaniline nanowire-modified electrode for voltammetric detection of DNA hybridization

A novel and sensitive electrochemical DNA biosensor based on electrochemically fabricated polyaniline nanowire and methylene blue for DNA hybridization detection is presented. Nanowires of conducting polymers were directly synthesized through a three-step electrochemical deposition procedure in an aniline-containing electrolyte solution, by using the glassy carbon electrode (GCE) as the working electrode. The morphology of the polyaniline films was examined using a field emission scanning electron microscope (SEM). The diameters of the nanowires range from 80 to 100 nm. The polyaniline nanowires-coated electrode exhibited very good electrochemical conductivity. Oligonucleotides with phosphate groups at the 5′ end were covalently linked onto the amino groups of polyaniline nanowires on the electrode. The hybridization events were monitored with differential pulse voltammetry (DPV) measurement using methylene blue (MB) as an indicator. The approach described here can effectively discriminate complementary from non-complementary DNA sequence, with a detection limit of 1.0 × 10⁻¹² mol l⁻¹ of complementary target, suggesting that the polyaniline nanowires hold great promises for sensitive electrochemical biosensor applications.     

pH-controlled morphological structure of polyaniline during electrochemical deposition

Electrodeposition of polyaniline (PAni) was performed across a broad pH range from pH 0.0 to 14.0. PAni films were found to grow from strong acidic environments at much faster rate and appeared to adopt different growth patterns from those grown from higher pH media, thus producing PAni films with very different morphologies ranging from nanofibres to microsized tubules to flakes like structures. The various morphologies of the PAni films were results of homogeneous and heterogeneous nucleation during electrochemical polymerization. These phenomena occurred under specific conditions which could be induced by varying the pH of the reaction media. Characteristic IR absorptions of the films deposited from increasing pH environment indicated little differences in chemical structure of the polymers except for the film grown from pH 14.0. Cyclic voltammetry data also indicated different electron transfer efficiency as a result of different morphology adopted. All except for PAni films obtained from pH 2.0 to 4.0 gave high specific capacitance at around 450 F g⁻¹ in 0.5 M H₂SO₄ and in 1.0 M NaNO₃ (pH 1.0) solution using 1.0 mA cm⁻² charging and discharging current density.     

Identification of inductive behavior for polyaniline via electrochemical impedance spectroscopy

Polyaniline (PANI) film electrodeposited in HCl medium using cyclic voltammetry (CV) with an upper potential limit of 0.90 V, exhibited an inductive behavior. PANI films deposited with different conditions were subjected to various applied potentials and the impedance characteristics were recorded through electrochemical impedance spectroscopy (EIS). The impedance results clearly reveal the existence of inductive behavior to PANI. Inductive behavior was observed for PANI films deposited with conditions which favor benzoquinone/hydroquinone (BQ/HQ) formation and further evidenced by X-ray photoelectron spectroscopy (XPS). A comparative analysis of the EIS and XPS results of PANI films prepared under similar conditions with the upper potential limits of 0.75 and 0.90 V, respectively, clearly documented that the presence of BQ/HQ, the degradation product of PANI, formed during the electrochemical polymerization at the upper potential limits causes inductive behavior to PANI.     

Controllable synthesis of MnO2/polyaniline nanocomposite and its electrochemical capacitive property

Polyaniline (PANI) and MnO₂/PANI composites are simply fabricated by one-step interfacial polymerization. The morphologies and components of MnO₂/PANI composites are modulated by changing the pH of the solution. Formation procedure and capacitive property of the products are investigated by XRD, FTIR, TEM, and electrochemical techniques. We demonstrate that MnO₂ as an intermedia material plays a key role in the formation of sample structures. The MnO₂/PANI composites exhibit good cycling stability as well as a high capacitance close to 207 F g⁻¹. Samples fabricated with the facile one-step method are also expected to be adopted in other field such as catalysis, lithium ion battery, and biosensor.     

A novel electrochemical DNA biosensor based on graphene and polyaniline nanowires

A novel DNA biosensor based on oxidized graphene and polyaniline nanowires (PANIws) modified glassy carbon electrode was developed. The resulting graphene/PANIw layers exhibited good DPV current response for the complementary DNA sequences. The good electron transfer activity might be attributed to the effect of graphene and PANIw. Graphene and PANIw nanolayers film with highly conductive and biocompatible nanostructure were characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The immobilization of the probe DNA on the surface of electrode was largely improved due to the unique synergetic effect of graphene and PANIw. Under optimum conditions, the biosensor exhibited a fast amperometric response, high sensitivity and good storage stability for monitoring DNA. The current response of the sensor increases linearly with the concentration of target from 2.12 × 10⁻⁶ to 2.12 × 10⁻¹² mol l⁻¹ with a relative coefficient of 0.9938. The detection limit (3σ) is 3.25 × 10⁻¹³ mol l⁻¹. The results indicate that this modified electrode has potential application in sensitive and selective DNA detection.     

Chemical and electrochemical synthesis of polyaniline/platinum composites

The synthesis of polyaniline/platinum composites (PANI/Pt) has been achieved using both chemical and electrochemical methods. The direct chemical synthesis of PANI/Pt proceeds through the oxidation of aniline by PtCl₆²⁻ in the absence of a secondary oxidant. SEM images of these samples indicate that the Pt particles are on the order of ∼1 μm for the chemically prepared composite. Electrochemical PANI/Pt synthesis is initiated by the uptake and reduction of PtCl₆²⁻ into an a priori electrochemically deposited PANI film. This method produces a uniform dispersion of Pt particles with smaller particles with diameters ranging between 200 nm and 1 μm. The results indicate that electrochemical methods may be more suitable for controlling particle dimension. Both materials show reduced proton doping relative to PANI without Pt, indicating the metal particles directly influence proton doping and the oxidation state of the polymer. The electrochemical data indicate that the conductivity in solution is sufficient such that the normal acid doping is attainable for PANI/Pt produced using either synthetic method.     

Template-based fabrication and electrochemical performance of CoSb nanowire arrays

Large aspect ratio single crystalline cobalt antimony (CoSb) nanowire arrays were synthesized by a pulsed electrodeposition technique. X-ray diffraction analysis showed that the as-synthesized nanowires have a highly preferential orientation. Scanning electron microscopy, transmission electron microscopy, and high-resolution transmission electron microscopy indicate that high-filling, ordered, and single-crystalline nanowires were obtained. Energy dispersive spectrometry analysis shows that the atomic ratio of Co to Sb is very close to 1:1, and the growth mechanism and the electrodeposition process are below discussed, together with a chemical composition analysis. The electrochemical performance shows that the discharge capacity is very high for the CoSb nanowire/AAM electrodes, and the electrodes exhibit better capacity retention than the pure metal Sb electrodes.     

Influence of microstructure on the capacitive performance of polyaniline/carbon nanotube array composite electrodes

A series of polyaniline/carbon nanotube array (PANI/CNTA) composite electrodes are prepared by electrodeposition of PANI onto CNTA electrodes by 100-500 cyclic voltammetry (CV) cycles, with the aim to investigate the influence of microstructure on the capacitive performance of PANI/CNTA composites. The morphology of PANI/CNTA composites varies remarkably with the CV cycles of electrodeposition. The optimum condition is obtained for the PANI/CNTA composite prepared by 100 CV cycles, corresponding to the highest specific capacitance, best rate performance, and longest cycle life, which are much better than that of activated carbon fiber cloth, the PANI electrodeposited on stainless steel substrate, and CNTA electrode. The forming process of the microstructure and its influence on the capacitive performance of PANI/CNTA composites are presented in this paper.     

Electrospun polyaniline nanofibers web electrodes for supercapacitors

Polyaniline nanofibers (PANI‐NFs) web are fabricated by electrospinning and used as electrode materials for supercapacitors. Field‐emission scanning electron microscope micrographs reveal nanofibers web were made up of high aspect ratio (>50) nanofibers of length ～30 μm and average diameter ～200 nm. Their electrochemical performance in aqueous (1M H₂SO₄ and Na₂SO₄) and organic (1M LiClO₄ in propylene carbonate) electrolytes is compared with PANI powder prepared by in situ chemical oxidative polymerization of aniline. The electrochemical properties of PANI‐NFs web and PANI powder are studied using cyclic voltammetry, galvanostatic charge/discharge, and electrochemical impedance spectroscopy. PANI‐NFs web show higher specific capacitance (～267 F g^?1) than chemically synthesized PANI powder (～208 F g^?1) in 1M H₂SO₄. Further, PANI‐NFs web demonstrated very stable and superior performance than its counterpart due to interconnected fibrous morphology facilitating the faster Faradic reaction toward electrolyte and delivered specific capacitance ～230 F g^?1 at 1000th cycle. Capacitance retention of PANI‐NFs web (86%) is higher than that observed for PANI powder (48%) indicating the feasibility of electro spun PANI‐NFs web as superior electrode materials for supercapacitors. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Improving the electrochemical properties of polyaniline by co-doping with titanium ions and protonic acid

Polyaniline co-doped with titanium ions and protonic acid was synthesized in aqueous H₂SO₄ solution containing Ti(SO₄)₂ (pH 2), and was characterized via Fourier-transform infrared spectra, UV–vis spectroscopy, X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy and cyclic voltammetry. Its conductivity was 2.8 S cm⁻¹ at room temperature (25 °C), which is the same order of magnitude as polyaniline doped with protonic acid (5 S cm⁻¹). Compared with polyaniline doped with protonic acid, it showed a better redox reversibility and cycling stability in aqueous pH 4.0 media, even in an acetate electrolyte (pH 4.0). It could be a promising material for several applications due the increase of the operating pH window of polyaniline in an aqueous environment.     

Fabrication and electrochemical characterization of polyaniline nanorods modified with sulfonated carbon nanotubes for supercapacitor applications

The novel composites of sulfonated multi-walled carbon nanotubes (sMWCNTs) modified polyaniline (PANI) nanorods (PANI/sMWCNTs) were synthesized successfully by in situ oxidative polymerization method in the HClO₄ solution. FTIR and Raman spectra revealed the presence of π–π interaction between the PANI and the sulfonated carbon nanotubes and the formation of charge transfer composites. It was found that the specific capacitance of the PANI/sMWCNT composites was markedly influenced by their morphological structure and the content of PANI which was coated onto the sMWCNT. The specific capacitance of the PANI/sMWCNT composite exhibited a maximum value of 515.2 F g⁻¹ at the 76.4 wt% PANI. The charge–discharge tests showed the PANI/sMWCNT composites possessed a good cycling stability (below 10% capacity loss after 1000 cycles) compared to PANI nanorods.     

Synthesis of carbon-coated graphene electrodes and their electrochemical performance

In this work, C-graphene composed of core graphene and carbon shells was prepared to obtain a new type of carbon electrode materials. Carbon shells containing nitrogen groups were prepared by coating polyaniline (PANI) onto graphene by in situ polymerization and subsequent carbonization at 850 °C. After carbonization, the C-graphene contained 6.5% nitrogen and showed a 2D plate structure and crystallinity like that of pristine graphene. In addition, the C-graphene exhibited electrochemical performance superior to that of pristine graphene, and the highest specific capacitance (170 F/g) of the C-graphene was obtained at a scan rate of 0.1 A/g, as compared to 138 F/g for pristine graphene. This superior performance was attributed to the synergistic effect of porous carbon layer and the graphene and the pseudocapacitive effect by the nitrogen groups formed on the carbon electrode after carbonization.     

Improving the electrochemical performance of polyaniline electrode for supercapacitor by chemical oxidative copolymerization with p-phenylenediamine

A series of poly(aniline-co-p-phenylenediamine) (P(ANI-co-PPDA)) copolymers were synthesized via the chemical oxidative polymerization of aniline with p-phenylenediamine (PPDA) as the comonomer. The structure and morphology of the P(ANI-co-PPDA) copolymers prepared with different feeding ratio of PPDA under different polymerizing temperature were compared with the two homopolymers polyaniline (PANI) and poly(p-phenylenediamine) (PPPDA). It is interesting to find that the electrical conductivity, specific capacitance and cycling stability of the P(ANI-co-PPDA) copolymer electrode materials were obviously improved with certain feeding ratio of PPDA, compared with those two homopolymers.     

The significance of electrochemical noise measurements on asymmetric electrodes

The technique of electrochemical noise measurement has now reached a relatively mature state, in that the methods required to make reliable measurements are well-understood, and some aspects of the analysis of such measurements have achieved general acceptance. Thus, the analysis of the resultant data in terms of the noise resistance, R_n, is widely accepted, and methods for the extraction of information about corrosion type are starting to become available.One requirement of most of the analysis methods is the assumption that the two electrodes used to determine the current noise are similar. This assumption is always something of a concern, and a number of methods have been proposed to enable the simultaneous or sequential determination of both potential and current noise associated with a single electrode, so that the assumption of similarity is not necessary. This paper is concerned with methods that use deliberately asymmetric electrodes.The normal justification for using deliberately asymmetric electrodes is to permit the study of what is happening on one of the two electrodes. The situation that applies when two asymmetric working electrodes are coupled together and the current and potential noise determined has been analysed previously. Unfortunately, however, the significance of this work has not generally been appreciated by those groups using asymmetric electrodes. In part this may be because the prior analysis did not explicitly consider the theoretical and experimental justification claimed for this type of experiment, and this paper aims to review this analysis, and to rationalise the claims and observations of previous workers.     

A study of the electrochemical behaviour of electrodes in operating solid-state supercapacitors

The electrochemical behaviour of electrodes and of complete solid-state supercapacitors has been studied by cyclic voltammetry (CV) and galvanostatic charge/discharge (CD) measurements using two independent electrochemical equipments. The first one controlled the execution of the test and recorded the voltage and current values of the complete supercapacitor while the other one recorded the potential changes of the single electrodes. In this work, two different types of capacitors were studied: (a) a symmetric supercapacitor using carbon electrodes, and (b) a hybrid (asymmetric) supercapacitor with ruthenium oxide/carbon in the positive electrode and carbon in the negative electrode. The studies evidenced that in the symmetric capacitors the positive electrode controlled the capacitive performance and an optimal mass ratio from 1.2:1 to 1.3:1 between the positive and the negative electrodes was found in the investigated conditions. For the hybrid supercapacitor it was observed that the ruthenium-based positive electrode influenced the capacitive performance of carbon-based negative electrode and that an accurate balance of carbon loading in the negative electrode was necessary.     

Concatenation of electrochemical grafting with chemical or electrochemical modification for preparing electrodes with specific surface functionality

Surface modified electrodes are used in electro-analysis, electro-catalysis, sensors, biomedical applications, etc. and could also be used in batteries. The properties of modified electrodes are determined by the surface functionality. Therefore, the steps involved in the surface modification of the electrodes to obtain specific functionality are of prime importance. We illustrate here bridging of two routes of surface modifications namely electrochemical grafting, and chemical or electrochemical reduction. First, by electrochemical grafting an organic moiety is covalently immobilized on the surface. Then, either by chemical or by electrochemical route the terminal functional group of the grafted moiety is transformed. Using the former route we prepared lithium alkyl carbonate (–O(CH₂)₃OCO₂Li) modified carbon with potential applications in batteries, and employing the latter we prepared phenyl hydroxyl amine (–C₆H₄NHOH) modified carbon which may find application in biosensors. Benzyl alcohol (–C₆H₄CH₂OH) modified carbon was prepared by both chemical as well as electrochemical route. We report combinations of conjugating the two steps of surface modifications and show how the optimal route of terminal functional group modification depends on the chemical nature of the moiety attached to the surface in the electrochemical grafting step.     

Electrochemical synthesis and characterization of polyaniline thin film and polyaniline powder

The polyaniline thin film electrode and powder have been synthesized on graphite electrodes from 0.5 M hydrochloric acid solution under galvanostatic conditions. The water insoluble and acetone soluble polyaniline mass fractions of the powder, as well as the polymerization efficiency, based on the emeraldine salt have been determined. The morphology of the obtained emeraldine salt powder has been investigated by the optical microscopy.     

Preparation and electrochemical investigation of the polyaniline/activated carbon nanocomposite for supercapacitor applications

The polyaniline (PANI)/activated carbon (AC) nanocomposite electrodes were prepared by electropolymerization of aniline monomers on the surface of AC/polyvinyl alcohol (PVA) electrodes for supercapacitor studies. Fourier transforms infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) analyses were performed to characterize the structure and morphology of the nanocomposite electrodes. The electrochemical properties of the prepared nanocomposite electrodes and the supercapacitive behavior of the PANI, AC, and AC/PANI/PVA electrodes were investigated using cyclic voltammetry (CV) and galvanostatic charge/discharge measurements, respectively. Morphological studies showed that a thin film of PANI has been uniformly deposited on the porous surface of AC electrode, and an ordered arrangement of nanostructures with interlinked porous network has been made. Electrochemical measurements showed that AC particles prevent the degradation of PANI chains during charge/discharge cycles. The specific capacitance of the AC/PANI/PVA nanocomposite electrode was 338.15 F/g which is higher than that of the pristine AC electrode (0.08 F/g). This is due to the contribution of PANI chains by their pseudocapacitance (redox reaction) properties. Although the specific capacitance of PANI electrode (378.57 F/g) was greater than that of the nanocomposite electrode, the cyclic stability of the PANI electrode was lower than that of the AC/PANI/PVA nanocomposite electrode.