Cluster Based Routing Protocol for Mobile Nodes in Wireless Sensor Network

Mobility of sensor nodes in wireless sensor network (WSN) has posed new challenges particularly in packet delivery ratio and energy consumption. Some real applications impose combined environments of fixed and mobile sensor nodes in the same network, while others demand a complete mobile sensors environment. Packet loss that occurs due to mobility of the sensor nodes is one of the main challenges which comes in parallel with energy consumption. In this paper, we use cross layer design between medium access control (MAC) and network layers to overcome these challenges. Thus, a cluster based routing protocol for mobile sensor nodes (CBR-Mobile) is proposed. The CBR-Mobile is mobility and traffic adaptive protocol. The timeslots assigned to the mobile sensor nodes that had moved out of the cluster or have not data to send will be reassigned to incoming sensor nodes within the cluster region. The protocol introduces two simple databases to achieve the mobility and traffic adaptively. The proposed protocol sends data to cluster heads in an efficient manner based on received signal strength. In CBR-Mobile protocol, cluster based routing collaborates with hybrid MAC protocol to support mobility of sensor nodes. Schedule timeslots are used to send the data message while the contention timeslots are used to send join registration messages. The performance of proposed CBR-Mobile protocol is evaluated using MATLAB and was observed that the proposed protocol improves the packet delivery ratio, energy consumption, delay and fairness in mobility environment compared to LEACH-Mobile and AODV protocols.     

ADV-MAC: Analysis and optimization of energy efficiency through data advertisements for wireless sensor networks

Several Medium Access Control (MAC) protocols have been proposed for wireless sensor networks with the objective of minimizing energy consumption. For example, Sensor-MAC (S-MAC) was proposed to reduce energy consumption by introducing a duty cycle. However, S-MAC cannot handle variable loads because of its static duty cycle. Timeout-MAC (T-MAC) introduced an adaptive duty cycle to handle variable traffic loads. However, nodes that do not take part in data exchange waste energy because of continuous renewal of their timeout values. To eliminate this energy waste, we propose ADV-MAC, a MAC protocol for wireless sensor networks that introduces the concept of advertising for data contention. ADV-MAC minimizes the energy lost in idle listening while maintaining an adaptive duty cycle to handle variable loads. Additionally, ADV-MAC enables energy efficient MAC-level multicasting. We derive an analytical model for the packet delivery ratio and the energy consumption of the protocol. We verify the analytical model with simulations and use the model to choose an optimal value of the advertisement period. Simulations show that the optimized ADV-MAC provides substantial energy gains (50–70% less than T-MAC and S-MAC for the scenarios investigated) while faring as well as T-MAC in terms of packet delivery ratio and latency.     

Adaptive Load-Aware Congestion Control Protocol for Wireless Sensor Networks

Congestion control in wireless sensor networks (WSNs) is crucial. In this article, we discuss congestion control and the adaptive load-aware problem for sensor nodes in WSNs. When the traffic load of a specific node exceeds its the available capacity of the node, a congestion problem occurs because of buffer memory overflow. Congestion may cause serious problems such as packet loss, the consumption of power, and low network throughput for sensor nodes. To address these problems, we propose a distributed congestion control protocol called adaptive load-aware congestion control protocol (ALACCP). The protocol can adaptively allocate the appropriate forwarding rate for jammed sensor nodes to mitigate the congestion load. Through the buffer management mechanism, the congestion index of neighboring sensor nodes, and an adjustment of the adaptive forwarding rate, the degree of congestion is alleviated markedly. The performance in allocating the forwarding rate effectively to neighboring sensor nodes also improves. The ALACCP can avoid packet loss because of traffic congestion, reduce the power consumption of nodes, and improve the network throughput. Simulation results revealed that the proposed ALACCP can effectively improve network performance and maintain the fairness of networks.     

An efficient energy consumption model using data aggregation for wireless sensor network

Wireless sensor networks (WSNs) have become increasingly important in recent years. Small and low-power sensor nodes make up these sensor networks. A random distribution of nodes is made throughout an unmanaged target region. One of WSN's key challenges is its limited and irreplaceable energy supply. In most situations, sensor nodes cannot be replaced since they operate in a hostile physical environment. The act of gathering and aggregating usable data from different sensor nodes situated to perceive almost the same attribute of the occurrence is known as data aggregation. The mathematical model is used in this research study to generate cluster-based data aggregation, which is an effective technique to increase energy usage by minimising the number of data transfers. The proposed mathematical model-based data aggregation (MM-DA) attains a 97% packet delivery ratio with minimal energy consumption. The MM-DA outperforms other existing approaches in terms of packet delivery ratio (PDR), energy consumption (EC), network lifetime and control overhead.     

A quadtree-based hierarchical data dissemination for mobile sensor networks

The envisioned sensor network architecture where some of the nodes may be mobile poses several new challenges to this special type of ad hoc wireless network. Recently, researchers have proposed several data dissemination protocols based on either some hierarchical structure mainly constructed by a source node or source/sink oriented dissemination tree to support mobile sinks. However, such a source-initiated hierarchical structure results in significant resource consumption as the number of source-sink pairs are increased. Additionally, stimulus mobility aggravates the situation, where several sources may build a separate data forwarding hierarchy along the stimulus moving path. In this paper, we propose a new data dissemination protocol that exploits “Quadtree-based network space partitioning” to provide more efficient routing among multiple mobile stimuli and sink nodes. A common hierarchy of cluster-head nodes is constructed where the data delivery to mobile sinks is independent of the current position of mobile stimuli. Therefore, the overhead needed for hierarchy (route) maintenance is lower. Simulation results show that our work significantly reduces average energy consumption while maintaining comparably higher data delivery ratio.     

Collision Free Mobility Adaptive (CFMA) MAC for wireless sensor networks

In this paper we propose high throughput collision free, mobility adaptive and energy efficient medium access protocol (MAC) called Collision Free Mobility Adaptive (CFMA) for wireless sensor networks. CFMA ensures that transmissions incur no collisions, and allows nodes to undergo sleep mode whenever they are not transmitting or receiving. It uses delay allocation scheme based on traffic priority at each node and avoids allocating same backoff delay for more than one node unless they are in separate clusters. It also allows nodes to determine when they can switch to sleep mode during operation. CFMA for mobile nodes provides fast association between the mobile node and the cluster coordinator. The proposed MAC performs well in both static and mobile scenarios, which shows its significance over existing MAC protocols proposed for mobile applications. The performance of CFMA is evaluated through extensive simulation, analysis and comparison with other mobility aware MAC protocols. The results show that CFMA outperforms significantly the existing CSMA/CA, Sensor Mac (S-MAC), Mobile MAC (MOB-MAC), Adaptive Mobility MAC (AM-MAC), Mobility Sensor MAC (MS-MAC), Mobility aware Delay sensitive MAC (MD-MAC) and Dynamic Sensor MAC (DS-MAC) protocols including throughput, latency and energy consumption.     

Lightweight routing with dynamic interests in wireless sensor and actor networks

Wireless sensor and actor networks (WSANs) have been increasingly popular for environmental monitoring applications in the last decade. While the deployment of sensor nodes enables a fine granularity of data collection, resource-rich actor nodes provide further evaluation of the information and reaction. Quality of service (QoS) and routing solutions for WSANs are challenging compared to traditional networks because of the limited node resources. WSANs also have different QoS requirements than wireless sensor networks (WSNs) since actors and sensor nodes have distinct resource constraints.In this paper, we present, LRP-QS, a lightweight routing protocol with dynamic interests and QoS support for WSANs. LRP-QS provides QoS by differentiating the rates among different types of interests with dynamic packet tagging at sensor nodes and per flow management at actor nodes. The interests, which define the types of events to observe, are distributed in the network. The weights of the interests are determined dynamically by using a nonsensitive ranking algorithm depending on the variation in the observed values of data collected in response to interests. Our simulation studies show that the proposed protocol provides a higher packet delivery ratio and a lower memory consumption than the existing state of the art protocols.     

Hybrid routing and load balancing protocol for wireless sensor network

In wireless sensor network, when the nodes are mobile, the network structure keeps on changing dynamically, that is, new nodes enter the network and old members exit the network. As a result, the path from one node to the other varies from time to time. In addition, if the load on a particular part of the network is high, then the nodes will not be capable of transmitting the data. Thus, data delivery at the destination will be unsuccessful. Moreover, the part of the network involved in transmitting the data should not be overloaded. To overcome these issues, a hybrid routing protocol and load balancing technique is discussed in this paper for the mobile data collectors in which the path from source to destination is ensured before data transmission. The hybrid routing protocol that combines the reactive and proactive approach is used to enhance gradient based routing protocol for low power and lossy networks. This protocol can efficiently handle the movement of multiple sinks. Finally, load balancing is applied over the multiple mobile elements to balance the load of sensor nodes. Simulation results show that this protocol can increase the packet delivery ratio and residual energy with reduced delay and packet drop.     

Signal power random fading based interference-aware routing for wireless sensor networks

Power loss and interference coexist in wireless transmissions where random uncertainty is aggravated due to the mobility of sensor nodes. A probability interference model was proposed, based on the physical model and random fading of the received signal power, to depict the uncertainty of wireless interference. In addition, an interference-aware routing metric was designed, in which interference, routing convergence and residual energies of nodes were integrated. Furthermore, an interference-aware probabilistic routing algorithm was proposed for mobile wireless sensor networks, and its correctness and time and space complexities were proved. The NS-2 simulation experiments showed that the proposed algorithm can achieve higher packet delivery ratio than Greedy Perimeter Stateless Routing in various cases like the pause time and maximum moving speed. Simultaneously, the energy consumption of a packet and average delay were taken into consideration to better meet the needs of mobile scenarios with higher reliability.     

Load balancing clustering and routing for IoT-enabled wireless sensor networks

Internet of things (IoT) devices are equipped with a number of interconnected sensor nodes that relies on ubiquitous connectivity between sensor devices to optimize information automation processes. Because of the extensive deployments in adverse areas and unsupervised nature of wireless sensor networks (WSNs), energy efficiency is a significant aim in these networks. Network survival time can be extended by optimizing its energy consumption. It has been a complex struggle for researchers to develop energy-efficient routing protocols in the field of WSNs. Energy consumption, path reliability and Quality of Service (QoS) in WSNs became important factors to be focused on enforcing an efficient routing strategy. A hybrid optimization technique presented in this paper is a combination of fuzzy c-means and Grey Wolf optimization (GWO) techniques for clustering. The proposed scheme was evaluated on different parameters such as total energy consumed, packet delivery ratio, packet drop rate, throughput, delay, remaining energy and total network lifetime. According to the results of the simulation, the proposed scheme improves energy efficiency and throughput by about 30% and packet delivery ratio and latency by about 10%, compared with existing protocols such as Chemical Reaction Approach based Cluster Formation (CHRA), Hybrid Optimal Based Cluster Formation (HOBCF), GWO-based clustering (GWO-C) and Cat Swarm Optimization based Energy-Efficient Reliable sectoring Scheme with prediction algorithms (P_CSO_EERSS). The study concludes that the protocol suitable for creating IoT monitoring system network lifetime is an important criteria.     

Energy‐efficient void avoidance geographic routing protocol for underwater sensor networks

Underwater wireless sensor networks (UWSNs) consist of a group of sensors that send the information to the sonobuoys at the surface level. Void area, however, is one of the challenges faced by UWSNs. When a sensor falls in a void area of communication, it causes problems such as high latency, power consumption, or packet loss. In this paper, an energy‐efficient void avoidance geographic routing protocol (EVAGR) has been proposed to handle the void area with low amount of energy consumption. In this protocol, a suitable set of forwarding nodes is selected using a weight function, and the data packets are forwarded to the nodes inside the set. The weight function includes the consumed energy and the depth of the candidate neighboring nodes, and candidate neighboring node selection is based on the packet advancement of the neighboring nodes toward the sonobuoys. Extensive simulation experiments were performed to evaluate the efficiency of the proposed protocol. Simulation results revealed that the proposed protocol can effectively achieve better performance in terms of energy consumption, packet drop, and routing overhead compared with the similar routing protocol.     

Enhanced mobility aware routing protocol for Low Power and Lossy Networks

Due to the technological advancement in Low Power and Lossy Networks (LLNs), sensor node mobility becomes a basic requirement for many extensive applications. Routing protocol designed for LLNs must ensure real-time data transmission with minimum power consumption. However, the existing mobility support protocols cannot work efficiently in LLNs as they are unable to adapt to the change in the network topology quickly. Therefore, we propose an Enhanced Routing Protocol for LLNs (ERPL), which updates the Preferred Parent (PP) of the Mobile Node (MN) quickly whenever the MN moves away from the already selected PP. Further, a new objective function that takes the mobility of the node into an account while selecting a PP is proposed. Performance of the ERPL has been evaluated with the varying system and traffic parameters under different topologies similar to most of the real-life networks. The simulation results showed that the proposed ERPL reduced the power consumption, packet overhead, latency and increased the packet delivery ratio as compared to other existing works.

     

BECPA: Bandwidth Efficient Cluster Based Packet Aggregation in Wireless Sensor Network

In recent years, energy consumption and data gathering is a foremost concern in many applications of wireless sensor networks (WSNs). The major issue in WSNs is effective utilization of the resource as energy and bandwidth with a large gathering of data from the monitoring and control applications. This paper proposes novel Bandwidth Efficient Cluster based Packet Aggregation algorithm for heterogeneous WSNs. It combines the idea of variable packet generation rate of each node with random data. The nodes are randomly distributed with different energy level and are equal in numbers. It uses the perfectly compressible aggregation function at cluster head based on the correlation of packets and data generated by each node. Compare to state-of-the-art solutions, the algorithm shows 4.43 % energy savings with reduced packet delivery ratio (62.62 %) at the sink. It shows better bandwidth utilization in packet aggregation than data aggregation.     

RM-MAC: a reservation based multi-channel MAC protocol for wireless sensor networks

Convergecast is a general communication pattern of wireless sensor networks (WSNs) in which sensed data is collected from outlying sensor nodes and is transmitted to a sink node. In this paper, we consider periodic convergecast, in which data packets are generated and transmitted repeatedly with a certain interval. To support the periodical packet delivery efficiently, we propose a reservation based multi-channel MAC protocol (RM-MAC) which employs a time reservation mechanism. Periodical packet delivery allows receiver nodes to recognize when the next packet is transmitted, which makes the nodes reserve the time for the next packet transmission. Consequently, our proposed mechanism can guarantee minimum delivery latency from source nodes to a sink node. Furthermore, RM-MAC provides a collision resolution mechanism which coordinates the reserved periodical transmissions among multiple sender nodes. It can prevent repeated collisions caused by the multiple-senders-single-receiver problem. We implement RM-MAC by using an ns-2 simulator to compare its performance with other protocols. The simulation results show that RM-MAC outperforms existing protocols in terms of energy efficiency and packet delivery latency.     

Moralism: mobility prediction with link stability based multicast routing protocol in MANETs

In recent research, link stability is getting tremendous attention in mobile adhoc networks (MANETs), because of several impediments that occur in a reliable and robust network. Link stability metric is used to improve network performance in terms of end-to-end delay, data success delivery ratio (DSDR) and available route time (ART). Energy consumption, bandwidth and communication delay of major concern in ad hoc networks. A high mobility of MANET nodes reduces the reliability of network communication. In a dynamic networks, high mobility of the nodes makes it very difficult to predict the dynamic routing topology and hence cause route/link failures. Multicast in MANETs is an emerging trend that effectively improves the performance while lowering the energy consumption and bandwidth usage. Multicast routing protocol transmits a packet to multicast a group at a given time instant to achieve a better utilization of resources. In this paper, node mobility is considered to map better their movement in the network. So, the links with long active duration time can be identified as a stable link for route construction. Variation in signal strength is used to identify whether the direction of the node is towards or away from estimating node. We consider signal strength as QoS metric to calculate link stability for route construction. Efforts are made to identify the link with highly probable longer lifetime as the best suitable link between two consecutive nodes. We predict the movement time of nodes that define the route path to the node destination. Exata/cyber simulator is used for network simulation. The simulation results of the proposed routing protocol are compared with on-demand multicast routing protocol and E-ODMRP, which works on minimum hop count path. Analysis of our simulation results has shown improvement of various routing performance metrics such as DSDR, ART, routing overhead and packet drop ratio.     

A Green Clustering Protocol for Mobile Sensor Network Using Particle Swarm Optimization

Energy consumption of sensor nodes is one of the crucial issues in prolonging the lifetime of wireless sensor networks. One of the methods that can improve the utilization of sensor nodes batteries is the clustering method. In this paper, we propose a green clustering protocol for mobile sensor networks using particle swarm optimization (PSO) algorithm. We define a new fitness function that can optimize the energy consumption of the whole network and minimize the relative distance between cluster heads and their respective member nodes. We also take into account the mobility factor when defining the cluster membership, so that the sensor nodes can join the cluster that has the similar mobility pattern. The performance of the proposed protocol is compared with well-known clustering protocols developed for wireless sensor networks such as LEACH (low-energy adaptive clustering hierarchy) and protocols designed for sensor networks with mobile nodes called CM-IR (clustering mobility-invalid round). In addition, we also modify the improved version of LEACH called MLEACH-C, so that it is applicable to the mobile sensor nodes environment. Simulation results demonstrate that the proposed protocol using PSO algorithm can improve the energy consumption of the network, achieve better network lifetime, and increase the data delivered at the base station.     

HEAP: A packet authentication scheme for mobile ad hoc networks

In mobile ad hoc networks (MANETs) and wireless sensor networks (WSNs), it is easy to launch various sophisticated attacks such as wormhole, man-in-the-middle and denial of service (DoS), or to impersonate another node. To combat such attacks from outsider nodes, we study packet authentication in wireless networks and propose a hop-by-hop, efficient authentication protocol, called HEAP. HEAP authenticates packets at every hop by using a modified HMAC-based algorithm along with two keys and drops any packets that originate from outsiders. HEAP can be used with multicast, unicast or broadcast applications. We ran several simulations to compare HEAP with existing authentication schemes, such as TESLA, LHAP and Lu and Pooch’s algorithm. We measured metrics such as latency, throughput, packet delivery ratio, CPU and memory utilization and show that HEAP performs very well compared to other schemes while guarding against outsider attacks.     

Clustering Based Two Dimensional Motion of Sink Node in Wireless Sensor Networks

The wireless sensor network (WSN) is always known for its limited-energy issues and finding a good solution for energy minimization in WSNs is still a concern for researchers. Implementing mobility to the sink node is used widely for energy conservation or minimization in WSNs which reduces the distance between sink and communicating nodes. In this paper, with the intention to conserve energy from the sensor nodes, we designed a clustering based routing protocol implementing a mobile sink called ‘two dimensional motion of sink node (TDMS)’. In TDMS, each normal sensor node collects data and send it to their respective leader node called cluster head (CH). The sink moves in the two dimensional direction to collect final data from all CH nodes, particularly it moves in the direction to that CH which has the minimum remaining energy. The proposed protocol is validated through rigorous simulation using MATLAB and comparisons have been made with WSN’s existing static sink and mobile sink routing protocols over two different geographical square dimensions of the network. Here, we found that TDMS model gives the optimal result on energy dissipation per round and increased network lifetime.

     

A Proxy Mobile IPv6 Based Global Mobility Management Architecture and Protocol

This paper specifies a global mobility management architecture and protocol procedure called GPMIP, which is based on Proxy Mobile IPv6. In GPMIP, mobility management is performed by the network entity rather than individual mobile nodes. The benefit is the elimination of the wireless link data delivery tunnel overhead between a mobile node and the access router. To compare with the well known Hierarchical Mobile IPv6 mobility management protocol, the location update, packet delivery, and total cost functions generated by a mobile node during its average domain residence time are formulated for each protocol based on fluid flow mobility model. Then, the impacts of various system parameters on the cost functions are analyzed. The analytical results indicate that the proposed global mobility management protocol can guarantee lower total costs. Furthermore, a qualitative comparison between GPMIP and some other global management protocols is also investigated.     

HVE-mobicast: a hierarchical-variant-egg-based mobicast routing protocol for wireless sensornets

In this paper, we propose a new mobicast routing protocol, called the HVE-mobicast (hierarchical-variant-egg-based mobicast) routing protocol, in wireless sensor networks (WSNs). Existing protocols for a spatiotemporal variant of the multicast protocol called a “mobicast” were designed to support a forwarding zone that moves at a constant velocity, \(\stackrel{\rightarrow}{v}\), through sensornets. The spatiotemporal characteristic of a mobicast is to forward a mobicast message to all sensor nodes that are present at time t in some geographic zone (called the forwarding zone) Z, where both the location and shape of the forwarding zone are a function of time over some interval (t _start ,t _end ). Mobicast routing protocol aims to provide reliable and just-in-time message delivery for a mobile sink node. To consider the mobile entity with the different moving speed, a new mobicast routing protocol is investigated in this work by utilizing the cluster-based approach. The message delivery of nodes in the forwarding zone of the HVE-mobicast routing protocol is transmitted by two phases; cluster-to-cluster and cluster-to-node phases. In the cluster-to-cluster phase, the cluster-head and relay nodes are distributively notified to wake them up. In the cluster-to-node phase, all member nodes are then notified to wake up by cluster-head nodes according to the estimated arrival time of the delivery zone. The key contribution of the HVE-mobicast routing protocol is that it is more power efficient than existing mobicast routing protocols, especially by considering different moving speeds and directions. Finally, simulation results illustrate performance enhancements in message overhead, power consumption, needlessly woken-up nodes, and successful woken-up ratio, compared to existing mobicast routing protocols.