Multilevel Plane Wave Based Near-Field Far-Field Transformation for Electrically Large Antennas in Free-Space or Above Material Halfspace

A recently presented fully probe-corrected near-field far-field transformation employing plane wave expansion and diagonal translation operators enables near-field far-field transformation for arbitrary measurement contours and arbitrary antennas. A multilevel extension, inspired by the multilevel fast multipole method, is presented that is suitable for the efficient transformation of electrically large antennas with a size of tens or even hundreds of wavelengths. The measurement points are grouped in a multilevel fashion and translations are carried out to the box centers on the highest level only. The plane waves are processed through the different levels to the measurement points using a disaggregation and anterpolation procedure resulting in a reduced overall complexity. In the second part of this paper, the influence of perfectly conducting ground planes and dielectric halfspaces, as an approximation for ground effects in a real measurement setup, is investigated. As such ground reflected waves are assumed, which propagate from the investigated antenna to the field probe and add to the direct wave contributions. The far-field conditions required for these assumptions are achieved by a source box grouping scheme. By this extension ground effects are directly considered within the near-field far-field transformation. Transformation results using simulated and measured near-field data are shown.      

Spatial sampling and filtering in near-field measurements

A sample spacing criterion and a data minimization technique for measurements made over the surface of a plane in the near field of an antenna are presented. The sample spacing is shown to depend on the distance from the antenna to the measurement plane, and on the extent to which evanescent waves can be neglected. The near-field data minimization technique utilizes two-dimensional spatial filtering to effect a significant reduction in computational effort required to calculate selected portions of the far-field pattern. Far-field patterns of anXband antenna calculated from near-field measurements are presented and compared with those measured on a standard far-field range. The far-field calculations are repeated for several near-field sample spacings and for various post-filter sample rates.     

Complex-Point Dipole Formulation of Probe-Corrected Cylindrical and Spherical Near-Field Scanning of Electromagnetic Fields

A probe-corrected electromagnetic theory based on complex-point dipoles is presented for computing the field of an arbitrary source of finite extent (for example a test antenna) from measurements of its near field on a cylindrical or spherical scanning surface. By representing the probe with complex-point dipoles, probe correction is achieved by simple factors that involve Hankel functions evaluated at complex points. Only four complex-point dipoles are needed to represent a typical precision probe used in near-field measurements. The theory uses neither translation and rotation theorems nor differential operators. One disadvantage of the theory is that it employs nonlinear optimization to determine the parameters of the probe model. The complex-point dipole representation of the probe makes realistic simulations of near-field scanning systems straightforward. The cylindrical theory is validated through a numerical example. The spherical theory is validated by experimental data.     

An overview of near-field antenna measurements

After a brief history of near-field antenna measurements with and without probe correction, the theory of near-field antenna measurements is outlined beginning with ideal probes scanning on arbitrary surfaces and ending with arbitrary probes scanning on planar, cylindrical, and spherical surfaces. Probe correction is introduced for all three measurement geometries as a slight modification to the ideal probe expressions. Sampling theorems are applied to determine the required data-point spacing, and efficient computational methods along with their computer run times are discussed. The major sources of experimental error defining the accuracy of typical planar near-field measurement facilities are reviewed, and present limitations of planar, cylindrical, and spherical near-field scanning are identified.     

Double $phi$-Step $theta$-Scanning Technique for Spherical Near-Field Antenna Measurements

Probe-corrected spherical near-field antenna measurements with an arbitrary probe set certain requirements on an applicable scanning technique. The computational complexity of the general high-order probe correction technique for an arbitrary probe, that is based on the Phi scanning, is O(N⁴), where N is proportional to the radius of the antenna under test (AUT) minimum sphere in wavelengths. With the present knowledge, the computational complexity of the probe correction for arbitrary probes in the case of the thetas scanning is O(N^-6), which is typically not acceptable. This paper documents a specific double Phi-step thetas scanning technique for spherical near-field antenna measurements. This technique not only constitutes an alternative spherical scanning technique, but it also enables formulating an associated probe correction technique for arbitrary probes with the computational complexity of 0(N4) while the possibility for the exploitation of the advantages of the thetas scanning are maintained.     

Suppression of reflections by directive probes in spherical near-field measurements

The influence of probe correction in spherical near-field measurements on signals from outside the test volume is investigated theoretically and experimentally. It is found that the suppression of reflections obtained by a directive probe is not disturbed by the probe correction. A geometric relation between the antenna "minimum sphere" and the probe pattern beamwidth is established, whose satisfaction guarantees the absence of numerical instabilities in the far-field computation. The condition is sufficient, but not necessary if the "minimum sphere" of the antenna is in the near field of the probe.     

Near-field diagnostics of small printed antennas using theequivalent magnetic current approach

A near-field to far-field transformation based on the antenna representation by equivalent magnetic current (EMC) sources has been proposed and validated experimentally on large high-directivity antenna arrays. In this paper, the use of EMC is extended to the diagnostics of low-directivity printed antennas. The limitation of the near-field to far-field transformation applied to EMC models of low-directivity antennas, caused by the finite dimensions of the antenna ground plane, is demonstrated. A method to partially overcome this limitation by including the contribution of diffracted rays is implemented, and its effectiveness is demonstrated with antenna prototypes. It is shown that the agreement between the far-field patterns measured in an anechoic chamber and the patterns computed from the EMC model obtained from the near-field measurements is significantly improved upon, within a sector of ±90° with respect to the antenna boresight in the E plane. The influence of the near-field sampling density and topology of the EMC model on the accuracy of the predicted far-field pattern is examined     

Determination of far-field antenna patterns from near-field measurements

In many cases, it is impractical or impossible to make antenna pattern measurements on a conventional far-field range; the distance to the radiating far field may be too long, it may be impractical to move the antenna from its operating environment to an antenna range, or the desired amount of pattern data may require too much time on a far-field range. For these and other reasons, it is often desirable or necessary to determine far-field antenna patterns from measurements made in the radiating near-field region; three basic techniques for accomplishing this have proven to be successful. In the first technique, the aperture phase and amplitude distributions are sampled by a scanning field probe, and then the measured distributions are transformed to the far field. In the second technique, a plane wave that is approximately uniform in amplitude is created by a feed and large reflector in the immediate vicinity of the test antenna. And in the third technique, the test antenna is focused within the radiating near-field region, patterns are measured at the reduced range, and then the antenna is refocused to infinity. Each of these techniques is discussed, and the various advantages and limitations of each technique are presented.     

球面近远场和远近场变换算法

天线的远场对于研究天线辐射特性具有重大意义，近场测量技术因其能够避免直接测量远场而得到广泛应用，该技术采用近远场变换获得远场，然而，检验该远场的准确性也是很重要的.为了解决此类问题，文中以球面近场测量为例，提供了一种解决方案.该方案主要探讨了球面波模式展开理论，该理论是实现球面近远场变换算法的关键，其将待测天线在空间建立的场展开成球面波函数之和，天线的加权系数既包含了远场信息也包含了近场信息.因此，不仅能够利用近场测量信息获得远场辐射特性，同样能够利用远场辐射特性反推得到近场处电场，这样就能检验由近远场变换算法得到的远场是否准确.文中首先推算得到了近远场变换公式，随后进一步推算得到远近场变换的公式，最后将本文算法计算结果与FEKO测量结果进行比较，二者吻合良好，从而证实了本文两种算法的有效性.     

A plane-polar approach for far-field construction from near-field measurements

It is well-known that the far field of an arbitrary antenna may be calculated from near-field measurements. Among various possible nearfield scan geometries, the planar configuration has attracted considerable attention. In the past the planar configuration has been used with a probe scanning a rectangular geometry in the near field, and computation of the far field has been made with a two-dimensional fast Fourier transform (FFT). The applicability of the planar configuration with a probe scanning a polar geometry is investigated. The measurement process is represented as a convolution derivable from the reciprocity theorem. The concept of probe compensation as a deconvolution is then discussed with numerical results presented to verify the accuracy of the method. The far field is constructed using the Jacobi-Bessel series expansion and its utility relative to the FFT in polar geometry is examined. Finally, the far-field pattern of the Viking high gain antenna is constructed from the plane-polar near-field measured data and compared with the previously measured far-field pattern. Some unique mechanical and electrical advantages of the plane-polar configuration for determining the far-field pattern of large and gravitationally sensitive space antennas are discussed. The time convention exp (j omega r) is used but is suppressed in the formulations.     

球模式展开理论近远场变换及快速算法

基于球模式展开理论的近远场变换是天线球面近场测量系统实现的关键,它将待测天线在空间建立的场展开成球面波函数之和,由于其计算公式复杂,因而计算耗费时间长。该文在实际计算中利用快速傅里叶变换及矩阵的思想可以大幅度提高程序运行速度,节省计算时间。采用该方法对角锥喇叭天线的近远场数据进行仿真验证,结果表明外推远场的结果和理论值吻合良好,说明了该方法在保证计算精度的同时,可缩短计算时间。     

Far-field predictions from near-field measurements using an exactintegral equation solution

This paper presents a new approach to derive far-field data needed in antenna and EMI/EMC testing from near-field measurements. An exact integral equation solution to the wave propagation problem is used to transform the near-field data to the far field. The method requires near-field measurements on two closed surfaces enclosing all sources and inhomogeneities. The approach is validated with numerical simulation of measurements of fields radiated from a known antenna     

Formulation of probe-corrected planar near-field scanning in thetime domain

Probe-corrected planar near-field formulas in the time domain are derived for both acoustic and electromagnetic fields, so that a single set of near-field measurements in the time domain yields the fields of the test antenna directly in the time domain. The time-domain probe-corrected formulas are first derived by taking the inverse Fourier transform-of the corresponding frequency-domain formulas, and then by using a time-domain expansion for the fields of the test antenna and a time-domain receiving characteristic of the probe. Because these general formulas, which involve a double integral over the scan plane and an infinite time-convolution integral, are rather complicated, we consider a special probe whose output due to an incoming time domain plane wave is proportional to the time derivative of the field of that plane wave. For this special “D-dot probe”, the probe-corrected formulas simplify to give the time-domain far-held pattern as a double spatial integral of the time-domain output of the probe over the scan plane multiplied by the angular dependence of the inverse receiving characteristic of the probe. Time-domain reciprocity relations are derived for reciprocal probes, and their time-domain receiving characteristics are related to their far fields. Finally, a time-domain sampling theorem is derived and a numerical example illustrates the use of the time-domain probe-corrected formulas     

Linear spiral sampling for the bipolar planar near-field antennameasurement technique

This paper investigates linear spiral sampling for bipolar planar near-field antenna measurements. This sampling scheme is, depending on range implementation, the most rapid polar near-filed data acquisition mode. The near-field to far-field transformation is performed using a modified optimal sampling interpolation (OSI)/fast Fourier transform (FFT) approach. Measured far-field pattern results for a waveguide-fed slot array antenna are presented and are shown to have excellent agreement with results obtained from a conventional bipolar measurement     

A near-field to far-field transformation for spheroidal geometry utilizing an eigenfunction expansion

This work presents a near-field to far-field (NF-FF) transformation for antenna and scatterer radiation evaluation. The transformation allows practical computation by making use of a sampling surface in the near-field that is spheroidal in shape: namely a prolate or oblate spheroid. The resulting vector wave equation does not support orthogonal vector solutions in spheroidal coordinates and instead rectangular field components are solved for using the scalar wave equation in spheroidal coordinates. The new transformation only requires knowledge of the completely-specified near-field electric field along the spheroidal transformation surface and does not need any information associated with the corresponding magnetic field. The benefit of using a spheroidal near-field geometry is its ability to closely conform to both linear and planar radiating structures while still permitting evaluation of the full far-field radiation pattern. Our approach makes use of an eigenfunction expansion of spheroidal wave-harmonics to develop two distinct, yet closely related, NF-FF transformation algorithms for each type of spheroidal surface. The spheroidal NF-FF transformation is validated and performance assessed using a well-characterized radiation structure. By applying the prolate and oblate algorithms to a radiating structure with known analytical near- and far-field electric fields, viz., a filament dipole with sinusoidal current distribution, we are able to setup and conduct multiple numerical tests that serve as a proof-of-concept for the spheroidal NF-FF transformation.     

平面波谱恢复算法在平面近场测量中的应用

介绍用于天线平面近场测量的一种近远场变换新算法。该法利用被测天线的平面波谱和口径场幅相分布之间的关系,以及天线口面的约束条件,用G-P迭代算法从平面波谱的置信谱域部分恢复出置信谱域外的平面波谱。这种方法减小了较小截断角下有限扫描面对测量精度的影响,并提高了天线近场测量的效率。     

Correction of near-field antenna measurements made with an arbitrary but known measuring antenna

We describe a technique for rigorously correcting for the effects of an arbitrary but known measuring antenna (or `probe?) in determination of vectorial far-field antenna pattern and power-gain function from near-field measurements.     

脉冲参数对脉冲天线测量的影响

研究了脉冲参数及其对测量的影响,根据时域场的平面波理论,给出了根据惠更斯源得到的时、频域远场方向图以及近远场变换公式。最后根据实测结果具体分析了脉冲天线测量中脉冲参数的选择要求。     

Planar near-field scanning in the time domain .2. Sampling theoremsand computation schemes

For part 1 see ibid. vol.47, no.9, p.1280 (1994). Two computation schemes for calculating the far-field pattern in the time domain from sampled near-field data are developed and applied. The sampled near-field data consists of the values of the field on the scan plane measured at discrete times and at discrete points on the scan plane. The first computation scheme is based on a frequency-domain near-field to far-field formula and applies frequency-domain sampling theorems to the computed frequency-domain near field. The second computation scheme is based on a time-domain near-field to far-field formula and computes the time-domain far field directly from the time-domain near field. A time-domain sampling theorem is derived to determine the spacing between sample points on the scan plane. The computer time for each of the two schemes is determined and numerical examples illustrate the use and the general properties of the schemes. For large antennas the frequency-domain computation scheme takes less time to compute the full far field than the time-domain computation scheme. However, the time-domain computation scheme is simpler, more direct, and easier to program. It is also found that planar time-domain near-field antenna measurements, unlike single-frequency near-field measurements, have the capability of eliminating the error caused by the finite scan plane, and thus can be applied to broadbeam antennas     

A First/Third-Order Probe Correction Technique for Spherical Near-Field Antenna Measurements Using Three Probe Orientations

A probe correction technique is described for spherical near-field antenna measurements based on sampling the near field for three probe orientations in each measurement direction. The technique applies to odd-order probes whose radiated field contains (significant) power only in the first (mu = plusmn1) and third- order (mu = plusmn3) azimuthal spherical modes. The technique is ideally suited as an optional probe correction technique for high-accuracy measurements in existing measurement systems that employ a rectangular or square waveguide probe and the traditional first-order probe correction technique.