Kinetics and Mechanism of Ru(III)-Catalyzed Oxidation of Paracetamol by Chloramine-T in Aqueous Acidic Medium

The present paper deals with the kinetics and mechanism of Ru(III)-catalyzed oxidation of paracetamol by chloramine-T (CAT) in aqueous perchloric acid medium at 303 K. The experimental result shows a first order dependence on paracetamol at its low concentrations, but tending towards zeroth order at its higher concentrations. The reactions follow a first order rate dependence with respect to oxidant [CAT] and [Ru(III)]. The reaction showed negative fractional-order dependence on the rate for [H⁺] and p-toluenesulphonamide. Variation in [Cl^?] and ionic strength of the medium did not bring about any significant change on the rate of reaction. The decrease in the reaction rate with decrease in the dielectric constant of the medium was observed in the oxidation of paracetamol. Kinetic and equivalence studies together with product analysis, observed effect of dielectric constant of the medium on the rate of reaction and activation parameters furnished a basis for the formation of a common reaction mechanism for the Ru(III)-catalyzed oxidation of paracetamol by CAT in the acidic medium.     

Zeolite encapsulated Ru(III), Cu(II) and Zn(II) complexes of benzimidazole as reusable catalysts for the oxidation of organic substrates

Ru(III), Cu(II) and Zn(II) complexes of benzimidazole (BzlH) have been synthesized in the supercages of zeolite-Y by the flexible ligand method and were characterized by spectroscopic (IR, UV–Vis and ESR) studies, XRD and thermogravimetric analysis, surface area, and pore volume measurements. The zeolite encapsulated complexes catalyzed the oxidation of ethylbenzene, benzoin, and cyclohexanol. Various parameters, such as concentration of oxidant and catalyst, reaction time, temperature of the reaction and type of solvents have been optimized to obtain the maximum transformation of ethylbenzene to a mixture of acetophenone, benzaldehyde and styrene. Under the optimized reaction conditions, [Ru(BzlH)]-Y gave 80.4 % conversion of ethylbenzene in 1 h. All these zeolite encapsulated complexes were more selective towards acetophenone formation. Oxidation of benzoin catalyzed by [Cu(BzlH)]-Y, [Ru(BzlH)]-Y and [Zn(BzlH)]-Y encapsulated complexes resulted in 75.5, 78.7 and 59.9 % conversion respectively to give benzaldehyde as exclusive product. A maximum conversion of 39.1 % cyclohexanol with [Cu(BzlH)]-Y was achieved to give cyclohexanone. The activity of neat complexes towards these reactions was also carried out. The encapsulated catalysts were significantly more active than neat complexes and recyclable without much loss in catalytic activity.     

Micellar Effect of Ammonium Based Cationic Surfactants on Kinetics of Methylene Blue‐Assisted Ru (III) and Cu (II) Catalyzed Cysteine/Cystine Transformation in Acidic Aqueous Media

Kinetic investigations of cysteine–cystine transformation assisted by model electron acceptor methylene blue (MB) and catalyzed synergistically by Ru (III) and Cu (II) in aqueous media of varying pH, temperature and micellar solutions of two ammonium based cationic surfactants viz. octadecylammonium chloride (OAC) and octadecylpyridine‐2‐ylmethylammonium chloride (OPMAC) were carried out. The homogeneous electron transfer between cysteine and MB was observed to exhibit pH sensitive kinetics that is affected by the presence of ammonium based cationic surfactants. While the postmicellar concentrations of OAC decrease the rate of the cysteine oxidation, the presence of OPMAC micelles was observed to accelerate the said reaction. The observed micellar kinetic effects modeled through quantum mechanical calculations are explained in light of the reactant‐micelle interactions. To the best of our knowledge the synthesis, micellization and micellar catalytic activity of OPMAC are yet to be reported in the literature.     

Zeolite encapsulated Ru(III), Cu(II) and Zn(II) complexes as effective catalysts for the oxidation of ethylbenzene

Ru(III), Cu(II) and Zn(II) complexes of imidazole (ImzlH) have been synthesized in the supercages of zeolite-Y by flexible ligand method and characterized by spectroscopic (IR and UV?CVis) studies, XRD and thermogravimetric analysis, surface area, and pore volume measurements. These complexes were screened for their catalytic study towards the oxidation of ethylbenzene to a mixture of acetophenone, benzaldehyde and styrene using tert-butylhydroperoxide (TBHP) as an oxidant. A best-suited reaction condition has been optimized for these catalysts by varying the amount of the oxidant and catalyst, reaction time and volume of solvent for maximum transformation of ethylbenzene. Under the optimized reaction conditions, [Cu(ImzlH)]-Y gave 79.3% conversion after 1?h of reaction time. All these catalysts were more selective towards acetophenone formation. Among the prepared catalysts, zeolite encapsulated Cu(II) complex was found to be more active than the corresponding Ru(III) and Zn(II) complexes and all the complexes were stable enough to be reused. The catalytic activities of the neat complexes and metal exchanged zeolites were also compared with the zeolite encapsulated metal complexes.     

Selective Competitive Biosorption of Au(III) and Cu(II) in Binary Systems by Magnetospirillum gryphiswaldense

The biosorption of Au(III) and Cu(II) ions in both single and binary systems by Magnetospirillum gryphiswaldense (MSR-1) was investigated. For comparison with the selective reinforced competitive biosorption process in a binary system, the experimental research first explored the biosorption of Au(III) and Cu(II) in a single system under various conditions. The biomass exhibited the highest single Au(III) and Cu(II) ion adsorption yields at room temperature (25°C), pH values of 2.5 and 5.0, respectively, and a biomass concentration of 10 g · L^?1 (3.83 g · L^?1, dry basis). The experimental data from the single component system for the two metallic ions fitted well to a Langmuir isotherm and a pseudo second-order kinetic models. In the Au(III)-Cu(II) binary system, the coexistence of Cu(II) cations promoted the adsorption of Au(III) within a certain range of ratios. A new sigmoidal Cu(II) biosorption isotherm was determined specifically to reveal the Cu(II) adsorption behavior in this case.     

Synthesis and Characterization of a Novel Gd(III)-Cu(II) Dinuclear Adduct

Two novel Gd(III)-Cu(II) dinuclear complexes have been prepared by the acid-base reaction between Gd(hfa)(3) and Cu(2,2-oxomac) (1, Cu(2,2-oxomac)Gd(hfa)(3)) and between Gd(hfa)(3) and Cu(3,2-oxomac) (2, Cu(3,2-oxomac)Gd(hfa)(3)). These complexes have been characterized by elemental analysis and infrared spectroscopy. The structure of 1 has been determined by X-ray diffraction. The copper atom is square pyramidal, bound to the four planar nitrogen atoms of the macrocycle and weakly bound to the oxygen atom of a dimethylformamide (dmf) molecule. The gadolinium atom is at the center of a tricapped trigonal prism. The nine-coordinate gadolinium atom is bound to six oxygen atoms of three hfa ligands, the two oxamide oxygen atoms of the copper macrocycle, and one oxygen atom of a second coordinated dmf molecule. Unsymmetric binding of the copper macrocycle to gadolinium leads to a distortion in the bridging atoms not observed in reactions of the copper macrocycles with transition metal hfa's. GRAPHICAL ABSTRACT: The reaction of Cu(2,2-oxomac) with Gd(hfa)(3) yields a Gd(III)-Cu(II) dinuclear complex with an oxamide bridge between copper(II) and gadolinium(III). The gadolinium atom adopts a tricapped trigonal prismatic geometry.     

Mechanistic studies of ruthenium(III)-catalyzed oxidation of DL-methionine by hexacyanoferrate(III) in an alkaline medium

The kinetics and mechanism of ruthenium(III) catalyzed oxidation of dl-methionine by alkaline hexacyanoferrate(III) (HCF(III)) in an alkaline medium were studied spectrophotometrically at 30±0.1°C. The reaction was first-order-dependent each on [HCF(III)] and [ruthenium(III)] and fractional-order-dependent on [alkali]. The rate of the reaction was found to be decreased with the increase in [methionine]. The main product of oxidation was methionine sulfone nitrile (3-(methylsulfonyl)propanenitrile) and it was identified and confirmed by FT-IR and mass spectral studies. Further, no effect of added reaction product was observed. A plausible mechanism was proposed involving complexation between methionine and ruthenium(III) species, [Ru(H₂O)₅OH]²⁺. Thermodynamic parameters for the reaction, E _a and Δ S ^#, were computed using linear least squares method and are found to be 65.83±1.03 kJ/mol and?249.58±3.35 J/K mol, respectively.

     

Optical and EPR Studies of Redox Interactions of Polyvalent Ions (Cr, Cu) in Glass

Chromium centers in isolated Cr ions and Cr(III)-Cu(II) redox interactions were investigated by optical and EPR spectra. Line shapes and intensities of high-field Cr(III)-Cu(II) superimposed EPR absorption lines were sensitive to alkali content of host glasses. High-field chromium g values (1.94 to 1.99) and intensities (190 to 3600) were calculated. The increase in g values from 1.96 to 1.98 is related to an increase in Cr(V) and to a conversion from Cu(I) to Cu(II) with increased alkali content. Two components of Cr powder spectra near g = 2.0 and g = 5.0 correspond to isolated octahedral Cr centers described by Landry et al. Cr-Cr pair structure was not observed for low Cr₂O₃ concentrations. Three components of optical absorption bands near 340 nm, 430 to 460 nm, and 600 nm were measured in Cr(III)-Cu(II) redox systems. Electronic interactions of Cr(III)-Cu(II) redox systems and the structure of Cr centers are discussed.     

A Novel Oxidation of Valine by N-Bromophthalimide in the Presence of Ruthenium(III) Chloride as a Homogeneous Catalyst

Kinetics of Ruthenium(III) [Ru(III)] chloride catalyzed oxidation of valine (Val) has been studied by N-bromophthalimide (NBP) in the acidic medium at 35 °C. The reaction rate follows first-order and zero-order dependence with respect to [NBP] and [Val]. First-order kinetics was observed for Ru(III) chloride at low range of concentrations and tending towards zero-order at higher concentrations. A negative effect was observed for [H⁺] and [phthalimide], while a positive effect was observed for [Cl^?] on the reaction rate. Hg(OAc)₂, ionic strength (I), and dielectric constant (D) of the medium did not change significantly the reaction rate. The rate constants as a function of temperature (298–318 K) were used to calculate activation parameters of the oxidation of Val by NBP. A plausible mechanism was proposed to explain the results of kinetic studies, reaction stoichiometry and product analysis.     

Mechanistic Aspects of Os(VIII)/Ru(III) Catalysed Oxidation of L-phenylalanine by Ag(III) Periodate Complex in Aqueous Alkaline Medium

The kinetics of oxidation of ruthenium(III) (Ru(III)) and osmium(VIII) (Os(VIII)) catalysed oxidation of L-phenylalanine (L-Pal) by diperiodatoargentate(III) (DPA) in aqueous alkaline medium at 27 °C and a constant ionic strength of 0.25 mol dm^?3 was studied spectrophotometrically. The involvement of free radicals was observed in the reactions. The reaction between DPA and L-Pal in alkaline medium exhibits stoichiometry as [L-Pal]:[DPA] = 1:1. The reaction is of first order in [Os(VIII)], [Ru(III)] and [DPA] and has negative fractional order in [IO₄ ^?]. It has less than unit order in [L-Pal] and [OH^?]. However, the order in [L-Pal] and [OH^?] changes from first order to zero order as their concentrations increase. The main oxidation products were identified by spot test and spectral studies. The probable mechanisms were proposed and discussed. The catalytic constant (K _c) was also calculated for Os(VIII) and Ru(III) catalysis at different temperatures. The activation parameters with respect to slow step of the mechanisms were computed and discussed and thermodynamic quantities were also calculated. It has been observed that the catalytic efficiency for the present reaction is in the order of Os(VIII) > Ru(III). The active species of catalyst and oxidant have been identified.     

Ru(III)/Os(VIII) Catalysed Oxidation of Gabapentin (Neurotin) Drug by Diperiodatoargentate(III) in Aqueous Alkaline Medium (Stopped Flow Technique): A Comparative Study

The kinetics of ruthenium(III) (Ru(III)) and osmium(VIII) (Os(VIII)) catalysed oxidation of neuroleptic drug, gabapentin (GBP) by diperiodatoargentate(III) (DPA) in alkaline medium at 27 °C and a constant ionic strength of 0.60 mol dm^?3 was studied spectrophotometrically. The oxidation products in both the cases are 1-(hydroxymethyl) cyclohexane acetic acid and Ag(I). The stoichiometry is the same in both the catalysed reactions i.e. [gabapentin]:[DPA] = 1:1. The reaction is of first order in Os(VIII)/Ru(III) and [DPA] and has less than unit order in both [GBP] and [alkali]. The oxidation reaction in alkaline medium has been shown to proceed via a Os(VIII)/Ru(III)-gabapentin complex, which further reacts with one mole of monoperiodatoargentate(III) (MPA) species in a rate determining step followed by other fast steps to give the products. The main products were identified by spot test and spectroscopic studies. The reaction constants involved in the different steps of the mechanism are calculated. The catalytic constant (K _c) was also calculated for both catalysed reactions at different temperatures. From the plots of log K _c versus 1/T, values of activation parameters with respect to the catalyst have been evaluated. The activation parameters with respect to slow step of the mechanism are computed and discussed and thermodynamic quantities are also determined. It has been observed that the catalytic efficiency for the present reaction is in the order of Os(VIII)>Ru(III). The probable active species of catalyst and oxidant have been identified.     

Catalytic effect of the Cu(II)‐ and Fe(III)‐cyclo‐hexanebutyrates on olive oil oxidation measured by Rancimat

In this work the Rancimat technique (temperature 110 °C and air flow 20 l/h) was used in order to test the catalytic effect induced by Cu(II)‐and Fe(III)‐ions on olive oil oxidation. Different amounts of Cu(II)‐ and Fe(III)‐cyclohexanebutyrates were added to a refined olive oil. Copper was shown to be a more active catalyst than iron. In fact, the induction time of the oil was halved by the addition of about 120 ng/g of copper versus 9000 ng/g of iron. The effect of copper and iron was also evaluated on the oil enriched with increasing quantities of caffeic acid (50, 100 and 200 mg/kg). The addition of this phenol induced a significant protective effect which delayed the oxidation of both the control and the oil samples enriched with metals. However, copper‐catalyzed oxidation also in the presence of the antioxidant, thus decreasing the oil oxidative stability approximately three times compared to the control.     

Bioaccumulation and biosorption of copper(II) and chromium(III) from aqueous solutions by Pichia stipitis yeast

BACKGROUND: Bioaccumulation and biosorption by Pichia stipitis yeast has not yet been explored. This paper evaluates, for the first time, the use of both viable and nonviable P. stipitis yeast to eliminate Cu(II) and Cr(III) from aqueous solutions. The effect of Cu(II) and Cr(III) ions on the growth and bioaccumulation properties of adapted and nonadapted biomass is investigated as a function of initial metal concentration. Binding capacity experiments using nonviable biomass are also performed as a function of temperature. RESULTS: The addition of Cu(II) and Cr(III) had a significant negative effect on the growth of yeast. Nonadapted cells could tolerate Cu(II) and Cr(III) ions up to a concentration of 75 ppm. The growth rate of nonadapted and adapted cells decreased with the increase in Cu(II) and Cr(III) concentration. Adapted P. stipitis biomass was capable of removing Cu(II) and Cr(III) with a maximum specific uptake capacity of 15.85 and 9.10 mg g⁻¹, respectively, at 100 ppm initial Cu(II) and Cr(III) concentration at pH 4.5. Adsorption data on nonviable cells were found to be well modeled by the Langmuir and Temkin isotherms. The maximum loading capacity of dry biomass predicted from Langmuir isotherm for Cu(II) and Cr(III) at 20 °C were 16.89 and 19.2 mg g⁻¹, respectively, at pH 4.5. Biosorptive capacities were dependent on temperature for Cu(II) and Cr(III) solutions. CONCLUSION: Cu(II)‐ and Cr(III)‐adapted cells grow and accumulate these ions at high ratios. On the other hand, nonviable P. stipitis was found to be an effective biosorbent for Cu(II) and Cr(III) biosorption. Copyright © 2008 Society of Chemical Industry     

Preparation and properties of chitosan‐graft‐poly(methyl methacrylate) nanoparticles using potassium diperiodatocuprate (III) as an initiator

Graft copolymer nanoparticles prepared from chitosan (CS) and methyl methacrylate (MMA) monomer were synthesized in aqueous solution by using potassium diperiodatocuprate [Cu(III)] as an initiator and characterized in terms of particle size, zeta potential, transmission electron microscopy (TEM), Fourier transform infrared spectroscopy, thermal stability, and X‐ray diffraction spectrometry. The results indicated that CS was covalently linked to poly(methyl methacrylate) (PMMA), and the resulting copolymers formed nanoparticles. These nanoparticles [prepared at 35°C, in a weight ratio of MMA/CS of 5 : 1 and with a Cu(III) concentration of 1.5 × 10⁻³ mol/L] were 54–350 nm in size, with a mean hydrodynamic diameter of 183 ± 3 nm and were highly uniform in particle‐size distribution, with a rather spherical shape and an obvious positive charge surface. The effect of reaction conditions such as Cu(III) concentration, reaction temperature, and the weight ratio of MMA/CS on the mean particle size was also investigated. Insulin‐loaded nanoparticles were prepared, and their maximal association efficiency was up to 85.41%. The experiment of release in vitro showed that the nanoparticles gave an initial burst release followed by a slowly sustained one. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Metal complexes of 2-methylimidazole encapsulated in zeolite-Y as efficient and reusable catalysts for oxidation of phenol and benzyl alcohol

Copper(II), ruthenium(III) and zinc(II) complexes of 2-methylimidazole (2-MeImzlH) encapsulated in the supercages of zeolite-Y have been synthesized and characterized by various physicochemical measurements. The catalytic potential of these complexes were tested for the oxidation of phenol and benzyl alcohol using 30 % H₂O₂ as an oxidant. Various parameters, such as concentration of oxidant and catalyst, reaction time, temperature of the reaction, volume of solvent and type of solvents have been optimized to obtain the maximum transformation of phenol to catechol and hydroquinone. The catalytic activity of zeolite encapsulated complexes followed the order: [Cu(2-MeImzlH)]-Y (72.5 %) > [Ru(2-MeImzlH)]-Y (57.8 %) > [Zn(2-MeImzlH)]-Y (43.2 %) after 5 h of reaction time. Oxidation of benzyl alcohol catalyzed by these encapsulated complexes gave only benzaldehyde as the product. The zeolite-encapsulated complexes could be easily separated after the reaction and reused. The neat complexes gave low conversions as compared to the encapsulated catalysts and decomposed. The catalytic activity of zeolite encapsulated complexes was found to be better than their respective non-encapsulated complexes and metal exchanged zeolites.     

Kinetic,Mechanistic and Spectral Investigation of Ruthenium(III) Catalysed Oxidation of Atenolol by Alkaline Diperiodatonickelate(IV) (Stopped Flow Technique)

The kinetics of ruthenium(III) catalysed oxidation of atenolol by diperiodatonickelate(IV) (DPN) in alkaline medium at a constant ionic strength of 1.0 mol dm^–3 has been studied spectrophotometrically using a rapid kinetic accessory. The reaction exhibits 1:1 stoichiometry (DPN:atenolol). The reaction shows first order dependence on [DPN] and [Ruthenium(III)] and apparent less than unit order dependence each in atenolol and alkali concentrations. Addition of periodate has no effect on the rate of reaction. Effect of added products, ionic strength and dielectric constant of the reaction medium have been investigated. The main products were identified by IR, NMR, fluorimetry and mass spectral studies. The results suggest the formation of a complex between the atenolol and ruthenium(III) species which reacts with one mole of diperiodatonickelate(IV) species in a rate determining step, resulting in the formation of a free radical, which in a subsequent fast step yields the products. The reaction constants involved in the mechanism were evaluated. The activation parameters were computed with respect to the slow step of the mechanism and discussed.     

Properties and application of poly(acrylphenylamidrazone‐phenylhydrazide) chelating fiber for enrichment–separation of trace gold and ruthenium from solution samples

An ICP‐OES method using a new poly(acrylphenylamidrazone‐phenylhydrazide) chelating fiber to enrich and separate trace Au(III) and Ru(III) ions from solution samples is established. The results show that 50–500 ng/mL of Au or Ru ions can be enriched quantitatively by 0.1 g of the fiber at pH 4, with recoveries > 96%. The ions can be desorbed quantitatively with 10 mL of 4 M HCl and 3.0% CS(NH₂)₂ solution from the fiber column, with recoveries > 97%, and 200–1000‐fold excesses of Cu(II), Zn(II), Ca(II), Mg(II), Mn(II), Cr(III), Fe(III), Ba(II), and Al(III) caused little interference in the determination of these ions by ICP–OES. The chelating fiber can be reused eight times, and the recoveries are all > 95%. The relative standard deviations for enrichment and determination of 50 ng/mL of Au and Ru are in the range 1.8–1.9% (1.9% for Au and 1.8% for Ru). The recoveries of trace Au and Ru ions added to real waste water and alloy samples are 96–98%. The concentration of each ion found in the alloy samples was in good agreement with that provided by the plant. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2656–2660, 2001     

联吡啶钌催化的异丙苯自动氧化反应

联吡啶钌[Ru(bpy)_3~(2+)]的光化学始于1972年,它是一种理想的进行激发态电子转移反应的试剂。但迄今其作为光氧化反应敏化剂的研究还不多。根据文献报道,认为它是一种单重态氧的敏化剂。 氧在有机化合物的氧化反应中一般以三种不同的形态出现,即单重态氧,超氧离子以     

Characterization of Several Metalloporphyrins in Unusual Oxidation States. The Effect of Axial and Equatorial Ligands

The effect of axial and equatorial ligands on the generation of unusual oxidation states in metalloporphyrins is discussed. Selected examples have been taken from the literature. These include the generation of Ni(III) and Ru(III) porphyrins from Ni(II) and Ru(II) complexes containing specific axial and equatorial ligands as well as the generatoin of a Cu(I) metalloporphyrin dianion which is produced upon the overall three-electron reduction of Cu(II) tetracyanoporphyrin. Special emphasis is placed on the oxidation and reduction of σ bonded iron phenyl porphyrins. These complexes, which are stable as Fe(III), may be oxidized by a single electron to yield unstable compounds characterized as containing a great deal of Fe(IV) character, or reduced by a single electron to produce stable species which resemble, in part, radical anions of Fe(III). This singly deduced species may be described by a resonance equilibria between an Fe(III) porphyrin anion radical and an Fe(II) porphyrin anion. Likewise, the singly oxidized complex may be described by a resonance equilibria between an Fe(IV) porphyrin cation and an Fe(III) cation radical.     

Investigation of electron-transfer reaction between alkaline hexacyanoferrate(III) and ranitidine hydrochloride – a histamine H2 receptor antagonist,in the presence of homogenous ruthenium(III) catalyst

The ruthenium(III)-catalyzed electron-transfer reaction between hexacyanoferrate(III) and ranitidine hydrochloride is studied in alkaline medium at 25°C and at an ionic strength of 1.10?mol/dm³. The reaction stoichiometry is established and is found to be 1:4, that is, for the oxidation of one mole of ranitidine, four moles of hexacyanoferrate(III) are consumed. The reaction products were characterized by spectral studies such as IR, GC-MS, ¹H-NMR and ¹³C-NMR. The reaction rate shows a less than unit order in substrate and alkali and a first-order dependence in oxidant, [Fe(CN)₆]^3? and the catalyst, ruthenium(III) concentrations. The active species of ruthenium(III), [Ru(H₂O)₅OH]²⁺, forms an intermediate complex with the substrate. The attack of complex by hexacyanoferrate(III) in the rate determining step produces a radical cation, which is further oxidized in the subsequent step to form the oxidation product. The effect of the reaction environment on the rate constant upon adding varying concentrations of KNO₃ and t-butanol was studied. The initially added products did not have any significant effect on the reaction rate. A plausible mechanism is proposed based on the experimental results. The effect of varying temperature on the reaction rate was also studied. The activation parameters for the slow step and the thermodynamic quantities for the equilibrium steps were evaluated.

The mechanism of title reaction has been studied and one mole of ranitidine consumes four moles of [Fe(CN)₆]^3?, as shown in the following equation: