Dibenzothiophene hydrodesulfurization over MoP/SiO<Subscript>2</Subscript> catalyst prepared with sol-gel method

Silica-supported molybdenum phosphide, MoP/SiO₂ catalysts with different Mo weight loadings were prepared by temperature programmed reduction of the oxidic catalyst precursors, which were prepared via sol-gel technique using ethyl silicate-40 as silica source. Samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), BET surface area measurements, and their catalytic activity in hydrodesulfurization (HDS) was tested with dibenzothiophene (DBT) as model compound. XRD analysis revealed the amorphous nature of the catalyst up to 10 wt% Mo loading and the formation of crystalline MoP phase on amorphous silica support with higher Mo loading. BET surface area showed high surface area for catalysts prepared by sol-gel technique with lower Mo content, and the surface area decreased with increasing in Mo loading. The HDS results showed that prepared MoP/SiO₂ exhibited high HDS activity and stability toward the catalytic test. Among the series of catalysts prepared, MoP/SiO₂ containing 20 wt% Mo was found to be the most active catalyst. And the effects of reaction temperature and hydrogen pressure on conversion and product selectivity were investigated.     

Selective oxidation of H<Subscript>2</Subscript>S to sulfur over CeO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> catalyst

The catalytic oxidation of hydrogen sulfide (H₂S) to elemental sulfur was studied over CeO₂-TiO₂ catalysts. The synthesized catalysts were characterized by various techniques such as X-ray diffraction, BET, X-ray photoelectron spectroscopy (XPS), temperature-programmed desorption of ammonia, and scanning electron microscopy (SEM). Catalytic performance studies of the CeO₂-TiO₂ catalysts showed that H₂S was successfully converted to elemental sulfur without considerable emission of sulfur dioxide. CeO₂-TiO₂ catalysts with Ce/Ti=1/5 and 1/3 exhibited the highest H₂S conversion, possibly due to the uniform dispersion of metal oxides, high surface area, and high amount of acid sites.     

Catalytic Wet Oxidation of H<Subscript>2</Subscript>S to Sulfur on V/MgO Catalyst

The V/MgO catalysts with different V₂O₅ loadings were prepared by impregnating MgO with aqueous vanadyl sulfate solution. All of the catalysts were characterized by X-ray diffraction (XRD), temperature-programmed reduction (TPR), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). It was observed that the H₂S removal capacity with respect to vanadia content increased up to 6 wt%, and then decreased with further increase in vanadia loading. The prepared catalysts had BET surface areas of 11.3 ~ 95.9 m²/g and surface coverages of V₂O₅ of 0.1 ~ 2.97. The surface coverage calculation of V₂O₅ suggested that a vanadia addition up to a monomolecular layer on MgO support increased the H₂S removal capacity of V/MgO, but the further increase of VO _x surface coverage rather decreased that. Raman spectroscopy showed that the small domains of Mg₃(VO₄)₂ could be present on V/MgO with less than 6 wt% vanadia loading. The crystallites of bulk Mg₃(VO₄)₂ and Mg₂(V₂O₇) became evident on V/MgO catalysts with vanadia loading above 15 wt%, which were confirmed by a XRD. The TPR experiments showed that V/MgO catalysts with the loading below 6 wt% V₂O₅ were more reducible than those above 15 wt% V₂O₅. It indicated that tetrahedrally coordinated V⁵⁺ in well-dispersed Mg₃(VO₄)₂ domains could be the active species in the H₂S wet oxidation. The XPS studies indicated that the H₂S oxidation with V/MgO could proceed from the redox mechanism (V⁵⁺ V⁴⁺) and that V³⁺ formation, deep reduction, was responsible for the deactivation of V/MgO.     

Effect of TiO<Subscript>2</Subscript> loading on the activity of V/TiO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> in the catalytic oxidehydrogenation of ethylbenzene with carbon dioxide

TiO₂-Al₂O₃ mixed oxides with different compositions ranging from 40wt-% to 95wt-% of TiO₂ were prepared by sol-gel method and impregnated with different amounts of VO _x . Supports and catalysts were characterized by X-ray diffraction (XRD), physisorption, temperature preprogrammed reduction (H₂-TPR), and ammonia temperature programmed desorption (NH₃-TPD). TiO₂ content in the support had obvious effect on the crystal structure, texture characteristic, acid property, and catalytic activity in dehydrogenation of ethylbenzene (EB) with carbon dioxide. The highest catalytic activity was acquired when the TiO₂ content was 50 wt-%.     

Effects of preparation methods for V<Subscript>2</Subscript>O<Subscript>5</Subscript>-TiO<Subscript>2</Subscript> aerogel catalysts on the selective catalytic reduction of NO with NH<Subscript>3</Subscript>

A series of V₂O₅-TiO₂ aerogel catalysts were prepared by the sol-gel method with subsequent supercritical drying with CO₂. The main variables in the sol-gel method were the amounts of V₂O₅ and when the vanadium precursor was introduced. V₂O₅-TiO₂ xerogel and V₂O₅/TiO₂ (P-25) were also prepared for comparison. The V₂O₅-TiO₂ aerogel catalysts showed much higher surface areas and total pore volumes than V₂O₅-TiO₂ xerogel and impregnated V₂O₅/TiO₂ (P-25) catalysts. The catalysts were characterized by N₂ physisorption, X-ray diffraction (XRD), FT-Raman spectroscopy, temperature-programmed reduction with H₂ (H₂-TPR), and temperature-programmed desorption of ammonia (NH₃-TPD). The selective catalytic reduction of NOx with ammonia in the presence of excess O₂ was studied over these catalysts. Among various V₂O₅-TiO₂ catalysts, V₂O₅ supported on aerogel TiO₂ showed a wide temperature window exhibiting high NOx conversions. This superior catalytic activity is closely related to the large amounts of strong acidic sites as well as the surface vanadium species with characteristics such as easy reducibility and monomeric and polymeric vanadia surface species. This work was presented at the 7 ^th Korea-China Workshop on Clean Energy Technology held at Taiyuan, Shanxi, China, June 26–28, 2008.     

Reduction of CO<Subscript>2</Subscript> to CO via reverse water-gas shift reaction over CeO<Subscript>2</Subscript> catalyst

CeO₂ catalysts with different structure were prepared by hard-template (Ce-HT), complex (Ce-CA), and precipitation methods (Ce-PC), and their performance in CO₂ reverse water gas shift (RWGS) reaction was investigated. The catalysts were characterized using XRD, TEM, BET, H₂-TPR, and in-situ XPS. The results indicated that the structure of CeO₂ catalysts was significantly affected by the preparation method. The porous structure and large specific surface area enhanced the catalytic activity of the studied CeO₂ catalysts. Oxygen vacancies as active sites were formed in the CeO₂ catalysts by H₂ reduction at 400 °C. The Ce-HT, Ce-CA, and Ce-PC catalysts have a 100% CO selectivity and CO₂ conversion at 580 °C was 15.9%, 9.3%, and 12.7%, respectively. The highest CO₂ RWGS reaction catalytic activity for the Ce-HT catalyst was related to the porous structure, large specific surface area (144.9 m²?g^?1) and formed abundant oxygen vacancies.     

Selective catalytic oxidation of H<Subscript>2</Subscript>S using nonhydrolytic vanadia-titania xerogels

A series of vanadia-titania (V-Ti) xerogel catalysts were prepared by nonhydrolytic sol-gel method. These catalysts showed much higher surface area and total pore volumes than the conventional V₂O₅-TiO₂ xerogel. Two species of surface vanadium in the xerogel catalysts were identified by Raman measurements: monomeric vanadyl and polymeric vanadates. The selective oxidation of hydrogen sulfide in the presence of excess water and ammonia was studied over these catalysts. Xerogel catalysts from the nonhydrolytic method showed very high conversion of H₂S without harmful emission of SO₂. The conversion of H₂S increased with increasing vanadia loading up to 10V-Ti; however, it decreased at higher vanadia loading (12V-Ti and 18V-Ti) probably due to the formation of crystalline V₂O₅.     

CO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>-free hydrogen and carbon nanofibers production by methane decomposition over nickel-alumina catalysts

Nickel catalysts supported on mesoporous nanocrystalline gamma alumina with various nickel loadings were prepared and employed for thermocatalytic decomposition of methane into CO _x -free hydrogen and carbon nanofibers. The prepared catalysts with different nickel contents exhibited mesoporous structure with high surface area in the range of 121.3 to 66.2m²g^?1. Increasing in nickel content decreased the pore volume and increased the crystallite size. The catalytic results revealed that the nickel content and operating temperature both play important roles on the catalytic performance of the prepared catalysts. The results showed that increasing in reaction temperature increased the initial conversion of catalysts and significantly decreased the catalyst lifetime. Scanning electron microscopy (SEM) analysis of the spent catalysts evaluated at different temperatures revealed the formation of intertwined carbon filaments. The results showed that increasing in reaction temperature decreased the diameters of nanofibers and increased the formation of encapsulating carbon.     

Synthesis of nickel catalysts supported on Zr-doped ordered mesoporous Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and their catalytic performance for low-temperature CO<Subscript>2</Subscript> reforming of CH<Subscript>4</Subscript>

A series of Zr-doped ordered mesoporous Al₂O₃ with various Zr contents were synthesized by evaporation-induced self-assembly strategy and the Ni-based catalysts supported on these Al₂O₃ materials were prepared by impregnation method. These catalysts with large specific surface area, big pore volume, uniform pore size possess excellent catalytic performance for the low-temperature carbon dioxide reforming of methane. The activities of these catalysts were tested in carbon dioxide reforming of methane reaction with temperature increasing from 500 to 650?°C and the stabilities of these catalysts were evaluated for long time reaction at 650?°C. It was found that when Zr/(Zr?+?Al) molar ratio?=?0.5%, the Ni/0.5ZrO₂–Al₂O₃ catalyst showed the highest activity, and exhibited superior stabilization compared to the Ni-based catalyst supported on traditional ordered mesoporous Al₂O₃. The “confinement effect” from mesoporous channels of alumina matrix is helpful to stabilize the Ni nanoparticles. As a promoter, Zr could stabilize the ordered mesoporous framework by reacting with Al₂O₃ to form ZrO₂–Al₂O₃ solid solution. Since ZrO₂ enhances the dissociation of carbon dioxide, more oxygen intermediates are given to remove the carbon formed during the reaction.     

V-promoted Ni/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst for synthetic natural gas (SNG) production: Catalyst preparation methodologies

The effect of preparation method on the catalytic performance of V-promoted Ni/Al₂O₃ catalysts for synthetic natural gas (SNG) production via CO methanation has been investigated. The Ni-V/Al₂O₃ catalysts were prepared by co-impregnation (CI) method, deposition precipitation (DP) method as well as two sequential impregnation (SI) methods with different impregnation sequence. Among the prepared catalysts, the one prepared by CI method exhibited the best catalytic performance due to its largest H₂ uptake and highest metallic Ni dispersion. In a 91h-lifetime test, this catalyst showed high stability at high temperature and weight hourly space velocity. This work demonstrates that the catalytic performance of the V-promoted Ni/Al₂O₃ catalysts can be improved by carefully controlling the preparation method/conditions.     

CO and CO<Subscript>2</Subscript> Methanation Over Ni/SiC and Ni/SiO<Subscript>2</Subscript> Catalysts

Ni/SiC and Ni/SiO₂ catalysts prepared by both wet impregnation (WI) and deposition–precipitation (DP) methods were compared for CO and CO₂ methanation. The prepared catalysts were characterized using N₂ physisorption, temperature-programmed reduction with H₂ (H₂-TPR), H₂ chemisorption, pulsed CO₂ chemisorption, temperature-programmed desorption of CO₂ (CO₂-TPD), transmission electron microscopy, and X-ray diffraction. H₂-TPR analysis revealed that the catalysts prepared by DP exhibit stronger interaction between the nickel oxides and support than those prepared by WI. The former catalysts exhibit higher Ni dispersions than the latter. The catalytic activities for both reactions over Ni/SiC and Ni/SiO₂ catalysts prepared by WI increase on increasing the Ni content from 10 to 20 wt%. The Ni/SiC catalyst prepared by DP shows higher catalytic activity for CO and CO₂ methanation than that of the Ni/SiC catalyst prepared by WI. Furthermore, it exhibits the highest catalytic activity for CO methanation among the tested catalysts. The high Ni dispersion achieved by the DP method and the high thermal conductivity enabled by SiC are beneficial for both CO and CO₂ methanation.     

Hydrogen Production from Glycerol Over Nickel Catalysts Supported on Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Modified by Mg,Zr, Ce or La

Hydrogen production from glycerol reforming in liquid (aqueous phase reforming, APR) and vapor (steam reforming SR) phase over alumina-supported nickel catalysts modified with Ce, Mg, Zr and La was studied. Characterization of catalysts by temperature programmed reduction and XPS analyses revealed important structural effects: (i) the intercalation of Mg between nickel and alumina that inhibited the alumina incorporation to nickel phases, (ii) the close contact between Ni and Zr phases and, (iii) the close surface interaction of La and Ce ions with NiO phases. The catalytic activity of the samples studied in this work clearly indicated the different catalyst functionalities necessary to carry out aqueous-phase and vapor-phase steam reforming of glycerol. For aqueous phase reforming of glycerol, the addition of Ce, La and Zr to Ni/Al₂O₃ improves the initial glycerol conversions obtained over the Ni/Al₂O₃ supported catalyst. It is suggested that the differences in catalytic activities are related with geometric effects caused by the decoration of Ni phases by Ce and La or by the close interaction between Ni and Zr. In spite that nickel catalysts showed high APR activities at initial times on stream, all samples showed, independently of support, important deactivation rates that deactivate the catalysts after few hours under operation. Catalysts characterization after APR showed the oxidation of the active metallic Ni during reaction as the main cause of the observed deactivation. In the case of the glycerol steam reforming in vapor phase, the use of Ce, La, Mg and Zr as promoters of Ni based catalysts increases the hydrogen selectivity. Differences in activity were explained in terms of enhancement in: surface nickel concentration (Mg), capacity to activate steam (Zr) and stability of nickel phases under reaction conditions (Ce and La).     

Influence of calcination temperature on the structure and properties of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> as support for Pd catalyst

We investigated the influence of the calcination temperature on the structural properties of Al₂O₃ and how the resultant Al₂O₃ support affects the characteristics of Pd/Al₂O₃ catalysts. Al₂O₃ pretreated at different calcination temperatures ranging from 500 °C to 1,150 °C, was used as catalyst supports. The Pd/Al₂O₃ catalysts were prepared by a deposition-precipitation method using a pH 7.5 precursor solution. Characterization of the prepared Pd/Al₂O₃ catalysts was performed by X-ray diffraction (XRD), N₂-physisorption, CO₂-temperature programmed desorption (TPD), CO-chemisorption, and field emission-transmission electron microscopic (FE-TEM) analyses. The CO-chemisorption results showed that the Pd catalyst with the Al₂O₃ support calcined at 900 °C, Pd/Al₂O₃ (900), had the highest and most uniformly dispersed Pd particles, with a Pd dispersion of 29.8%. The results suggest that the particle size and distribution of Pd are related to the phase transition of Al₂O₃ and the ratio of isolated tetrahedral to condensed octahedral coordination sites (i.e., functional groups), where the tetrahedral sites coordinate more favorably with Pd.     

Effects of La<Subscript>2</Subscript>O<Subscript>3</Subscript> on ZrO<Subscript>2</Subscript> supported Ni catalysts for autothermal reforming of CH<Subscript>4</Subscript>

The effect of La₂O₃ content in Ni-La-Zr catalyst was investigated for the autothermal reforming (ATR) of CH₄. The catalysts were prepared by the coprecipitation method and had a mesoporous structure. Temperature programmed reduction (TPR) and X-ray photoelectron spectroscopy (XPS) indicated that a strong interaction developed between Ni species and the support with the addition of La₂O₃. Thermogravimetric analysis (TGA) and H₂-pulse chemisorption showed that the addition of La₂O₃ led to well dispersed NiO molecules on the support. Ni-La-Zr catalysts gave much higher CH₄ conversion than Ni-Zr catalyst. The Ni-La-Zr containing 3.2 wt% La₂O₃ showed the highest activity. The optimum conditions for maximal CH₄ conversion and H₂ yield were H₂O/CH₄=1.00, O₂/CH₄=0.75. Under these conditions, CH₄ conversion of 83% was achieved at 700 °C. In excess O₂ (O₂/CH₄>0.88), the catalytic activity was decreased due to sintering of the catalyst.     

Maximization of total surface area of Pt-SnO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst by the Taguchi method

The maximization of the total surface area of Pt-SnO₂/Al₂O₃ catalyst was studied by using the Taguchi method of experimental design. The catalysts were prepared by sol-gel method. The effects of HNO₃, H₂O and aluminum nitrate concentrations and the stirring rate on the total surface area were studied at three levels of each. L₉ orthogonal array leading nine experiments was used in the experimental design. The parameter levels that give maximum total surface area were determined and experimentally verified. In the range of conditions studied it was found that, medium levels of HNO₃ and H₂O concentration and lower levels of aluminum nitrate concentration and stirring rate maximize the total surface area.     

Improving the SO<Subscript>2</Subscript> absorption rate of CeFeMg-based sorbent promoted with titanium promoter

To improve the poor SO₂ absorption rate of CeFeMgTi sorbent with high sulfur removal capacity and fast regeneration, a new sorbent, CeFeMgTi-sol was prepared by the modified co-precipitation method and tested in a packed bed reactor at RFCC conditions (sulfation of MgO to MgSO₄ in the presence of low concentration of SO₂ at 973 K, regeneration of MgSO₄ to MgO and H₂S in the presence of H₂ at 803 K). The CeFeMgTi-sol sorbent showed excellent SO₂ absorption and sulfur removal capacity (46.2 sulfur g/g absorbent×100). It was found that the SO₂ absorption rates were related to the structure of the Mg and Ti and the textural properties such as surface area and pore volume. In the case of the fresh state of CeFeMgTi sorbent, CeO₂, MgO and MgTiO₃ structures were observed. But the new CeFeMgTisol sorbent before SO₂ absorption, showed a separated MgO and TiO₂ peak only. These differences in the sorption rates were discussed by the difference in the XRD pattern, surface area and pore volume.     

Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and CeO<Subscript>2</Subscript>-promoted MgO sorbents for CO<Subscript>2</Subscript> capture at moderate temperatures

A series of Al₂O₃ and CeO₂ modified MgO sorbents was prepared and studied for CO₂ sorption at moderate temperatures. The CO₂ sorption capacity of MgO was enhanced with the addition of either Al₂O₃ or CeO₂. Over Al₂O₃-MgO sorbents, the best capacity of 24.6 mg- CO₂/g-sorbent was attained at 100 °C, which was 61% higher than that of MgO (15.3 mg-CO₂/g-sorbent). The highest capacity of 35.3 mg-CO₂/g-sorbent was obtained over the CeO₂-MgO sorbents at the optimal temperature of 200 °C. Combining with the characterization results, we conclude that the promotion effect on CO₂ sorption with the addition of Al₂O₃ and CeO₂ can be attributed to the increased surface area with reduced MgO crystallite size. Moreover, the addition of CeO₂ increased the basicity of MgO phase, resulting in more increase in the CO₂ capacity than Al₂O₃ promoter. Both the Al₂O₃-MgO and CeO₂-MgO sorbents exhibited better cyclic stability than MgO over the course of fifteen CO₂ sorption-desorption cycles. Compared to Al₂O₃, CeO₂ is more effective for promoting the CO₂ capacity of MgO. To enhance the CO₂ capacity of MgO sorbent, increasing the basicity is more effective than the increase in the surface area.

Open image in new window

     

Effect of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-ZrO<Subscript>2</Subscript> xerogel support on hydrogen production by steam reforming of LNG over Ni/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-ZrO<Subscript>2</Subscript> catalyst

An Al₂O₃-ZrO₂ xerogel (AZ-SG) was prepared by a sol-gel method for use as a support for a nickel catalyst. The Ni/AZ-SG catalyst was then prepared by an impregnation method, and was applied to hydrogen production by steam reforming of LNG. A nickel catalyst supported on commercial alumina (A-C) was also prepared (Ni/A-C) for comparison. The hydroxyl-rich surface of the AZ-SG support increased the dispersion of nickel species on the support during the calcination step. The formation of a surface nickel aluminate-like phase in the Ni/AZ-SG catalyst greatly enhanced the reducibility of the Ni/AZ-SG catalyst. The ZrO₂ in the AZ-SG support increased the adsorption of steam onto the support and the subsequent spillover of steam from the support to the active nickel sites in the Ni/AZ-SG catalyst. Both the high surface area and the well-developed mesoporosity of the Ni/AZ-SG catalyst improved the gasification of adsorbed surface hydrocarbons in the reaction. In the steam reforming of LNG, the Ni/AZ-SG catalyst showed a better catalytic performance than the Ni/A-C catalyst. Moreover, the Ni/AZ-SG catalyst showed strong resistance toward catalyst deactivation.     

Reduced graphene oxide supported V<Subscript>2</Subscript>O<Subscript>5</Subscript>-WO<Subscript>3</Subscript>-TiO<Subscript>2</Subscript> catalysts for selective catalytic reduction of NOx

We present a reduced-graphene-oxide (rGO)-supported V2O₅-WO₃-TiO₂ (VWTi) catalysts for the efficient selective catalytic reduction of NOx. The rGO support provides well-dispersed functional sites for the nucleation of nanoparticles, allowing the formation of VWTi catalysts with high specific surface areas. The dispersion of the nanoparticles, as observed by transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS), confirmed the uniform dispersion of the particles on the rGO surface. Detailed Fourier-transform infrared (FT-IR) and NH₃ temperature-programmed desorption (NH₃-TPD) analyses indicated that the high density of acidic sites provided by the rGO is key to the observed enhancement of NOx removal efficiency, and the rGO-supported catalysts exhibit improved NOx removal efficiencies with smaller amounts of V₂O₅ and WO₃ compared with the commercially available V₂O₅-WO₃-TiO₂ catalysts.     

Coprecipitated Ni‐Co Bimetallic Nanocatalysts for Methane Dry Reforming

Methane dry reforming was studied over nanostructure bimetallic Ni‐Co‐MgO catalysts. The catalysts were prepared by coprecipitation with different Ni‐Co contents and characterized by XRD, BET, N₂ adsorption/desorption, temperature‐programmed reduction (TPR), SEM, and temperature‐programmed oxidation (TPO) techniques. XRD results let conclude that all samples contained MgO crystallite phases. With a higher Ni content the intensity of the diffraction peaks became stronger, indicating growth of the crystallite size of the prepared solid solutions. BET analysis demonstrated that a higher Ni‐Co content decreased the surface area. The optimal catalyst could be determined which had the highest activity and a good stability in dry reforming reaction.