Interrogation of “surface,” “skin,” and “core” orientation in thermotropic liquid‐crystalline copolyester moldings by near‐edge X‐ray absorption fine structure and wide‐angle X‐ray scattering

Injection molding thermotropic liquid‐crystalline polymers (TLCPs) usually results in the fabrication of molded articles that possess complex states of orientation that vary greatly as a function of thickness. “Skin‐core” morphologies are often observed in TLCP moldings. Given that both “core” and “skin” orientation states may often differ both in magnitude and direction, deconvolution of these complex orientation states requires a method to separately characterize molecular orientation in the surface region. A combination of two‐dimensional wide‐angle X‐ray scattering (WAXS) in transmission and near‐edge X‐ray absorption fine structure (NEXAFS) spectroscopy is used to probe the molecular orientation in injection molded plaques fabricated from a 4,4′‐dihydroxy‐α‐methylstilbene (DHαMS)‐based thermotropic liquid crystalline copolyester. Partial electron yield (PEY) mode NEXAFS is a noninvasive ex situ characterization tool with exquisite surface sensitivity that samples to a depth of 2 nm. The effects of plaque geometry and injection molding processing conditions on surface orientation in the regions on‐ and off‐ axis to the centerline of injection molded plaques are presented and discussed. Quantitative comparisons are made between orientation parameters obtained by NEXAFS and those from 2D WAXS in transmission, which are dominated by the microstructure in the skin and core regions. Some qualitative comparisons are also made with 2D WAXS results from the literature. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Salt‐Controlled Selectivity in “on Water” and “in Water” Passerini‐Type Multicomponent Reactions

We have demonstrated that simple sodium salts can completely reverse the product ratios of the Passerini reaction in aqueous media. Furthermore, the use of the “salting‐in” salt and a small excess of the nucleophile gives significantly higher yields than the use of the saturated solution of the nucleophile alone.     

Solvent extraction — the challenges of a “mature” technology

The solvent extraction area is perceived by some chemical engineers as being mature and fully developed. The present review shows that this is not the case. Many chemical engineering problems must be solved before equipment can be confidently designed from first principles. The review also outlines progress in extraction process chemistry, and in new techniques such as membrane extraction.     

The “alexandrite effect” in gemstones

The term “alexandrite effect” is used in gemology to describe a distinct change of color appearance when a gemstone is switched from daylight to incandescent light. Gemstones that exhibit the alexandrite effect can actually be divided into four categories based upon the value of the calculated absolute hue-angle change of the material under different pairs of illuminants. the alexandrite effect is a non-color-constancy phenomenon. It can be explained by a combination of both chromaticity adaptations to the different light sources, and vision system responses to the spectral distribution of the light emitted by alexandrite effect gemstones when they are illuminated alternatively by the different light sources.     

Fatty acids characterization in “Alicante” and “Jijona” nougat bars,two Spanish sweets

In this work the fatty acids in two typical Spanish sweets have been characterized: Alicante and Jijona nougat bars, using gas chromatography with a flame-ionization detector. The majority of the fatty acids in these two sweets are unsaturated, and only a low proportion is saturated, which turns them into a type of food with low influence on cholesterol resulting in low atherogenic power, due to the low amount of saturated fatty acids, which is far from constituting 1/3 of the total sum of fatty acids granted by a diet, a limit that has been advised by a great number of International Scientific Committees.     

Mossgas “gas-to-liquid” diesel fuels—an environmentally friendly option

This paper presents a brief summary and comparison of heavy vehicle emissions using Mossgas synthetically derived diesel as opposed to a US Regular Federal 49-state number 2 diesel fuel. A series of engine dynamometer and heavy-duty chassis dynamometer tests were performed at West Virginia University early in 1999.

The Mossgas gas-to-liquid (GTL) low sulphur diesel fuel is produced primarily by the conversion of olefins to distillate (COD) process in conjunction with a high temperature Fisher–Tropsch technology process.

Findings were that there were significant emission benefits when using Mossgas GTL diesel fuel. Oxides of nitrogen (NO_x) and particulate matter (PM) emissions were substantially lower when compared to normal fossil fuel-derived diesel. Additionally the benefits have been found to cut across different engine technologies, various test cycles, engine age (1991–1999), as with or without engine aftertreatment catalysts.

The Mossgas GTL diesel meets the world-wide challenge to produce environmentally friendly transportation fuels and sets the benchmark for future diesel specifications. Accordingly Mossgas has petitioned the US Department of Energy to register this fuel as an alternative fuel under its EPACT program [1 and 2].     

Let's call it “color‐gamut rendering”

The term “color gamut” historically has been associated with color output such as optimal color stimuli and additive and subtractive imaging systems. Recently, this term has been used with input devices such as scanners and digital cameras. It is proposed that the term “color‐gamut rendering” should be used instead of input devices. This clarifies the distinction between input (analysis) and output (synthesis) color systems in terms of the effect of an input system on defining the colorimetric properties of an output system. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 334–335, 2007