EFFECT OF SURFACTANT GEL AND GUM COMBINATIONS ON DOUGH RHEOLOGICAL CHARACTERISTICS AND QUALITY OF BREAD

Sodium stearoyl‐2‐lactylate (SSL), diacetyl tartaric acid esters of monoglyceride (DATEM), glycerol monostearate (GMS) and distilled glycerol monostearate (DGMS) surfactant gels were made with water. Addition of surfactant gels decreased water absorption by the bread while xanthan, karaya, guar and locust bean gums increased the same. Only DGMS or GMS and gum combinations further improved water absorption. All the gums except for guar along with surfactant gels improved dough stability. Both surfactant gels and gums improved the extensograph dough properties of wheat flour to varying degrees. Alveograph characteristics of wheat flour improved to varying extents with surfactant gels while the gums influenced the viscoelastic properties in differing ways. Different combinations of surfactant gels and gums showed varied influences on rapid visco analyzer characteristics of wheat flour. Both surfactant gels and gums improved the bread making quality. Among surfactants, SSL in combination with gums, and among gums locust bean in combination with surfactant gels improved the bread making quality of wheat flour to a maximum extent.     

EFFECT OF REPLACEMENT OF SUGAR WITH SUCRALOSE AND MALTODEXTRIN ON RHEOLOGICAL CHARACTERISTICS OF WHEAT FLOUR DOUGH AND QUALITY OF SOFT DOUGH BISCUITS

ABSTRACT

The effect of replacement of 30% sugar with 0.05% sucralose and of different levels of maltodextrin (MD) on dough rheology and quality of biscuits was studied. The results showed that replacement of sugar with increasing amount of MD from 10 to 40% along with 0.05% sucralose influenced dough rheology. The farinograph water absorption increased up to 20% addition of MD and thereafter decreased. Objective evaluation of biscuits showed that the spread ratio of biscuits with 10% MD was 7.1, 20% MD was 7.8, 30% MD was 9.4 and 40% MD was 10.5, in comparison to control biscuits (9.9) with 30% sugar. The best overall quality score was reported for the control biscuits with 30% sugar, 69 out of the maximum score of 80, followed by 30% MD (65), 40% MD (60.5), 20% MD (54) and 10% MD (49.5). The results showed the possibility of replacing sugar in biscuit with sucralose and MD.

PRACTICAL APPLICATIONS

This article discusses the changes as a result of replacement of sugar with sucralose and maltodextrin (MD) in the rheological characteristics of wheat flour dough. The level of sucralose and MD required to replace sugar from control recipe in order to produce rheological characteristics of wheat flour dough comparable with that of the control has been highlighted in the article. This information will have a practical application in the production of sugar‐free soft dough biscuits.     

EFFECT OF EMULSIFIERS AND FUNGAL α-AMYLASE ON RHEOLOGICAL CHARACTERISTICS OF WHEAT DOUGH AND QUALITY OF FLAT BREAD

Teftoon, a flat bread made of whole wheat flour, is prepared by hand sheeting of dough, followed by baking. Different emulsifiers, like lecithin, E471 (distilled monoglyceride) and E472 (diacetylated tartaric acid esters of mono- and digelycerid of fatty acids), were added to the flour at various levels ranging between 0.25 and 1.0% w/w, and it was observed that they improved the dough characteristics. Improvement in bread quality parameters, such as force to tear and sensory acceptability, were monitored. Fungal α -amylase was also incorporated into the flour at 5–20 g/100 kg flour basis alone and in combination with the emulsifier. The force required to tear the fresh bread was decreased with emulsifier and enzyme addition; however, E472 addition at 0.75% w/w of whole wheat flour gave the softest bread. The tear force of stored bread significantly increased with storage; however, bread containing E472 showed a less increase in tear force up to a period of 3 days. The sensory acceptability was found to be higher than that of the control bread for emulsifiers, and lower for enzyme at a concentration higher than 10 g/kg flour.

PRACTICAL APPLICATIONS

Flat bread is normally consumed fresh, but the staling phenomenon starts immediately after baking this kind of bread. Today, large-scale production and increased consumer demands for high-quality bread with long shelf life have created the need for functional food additives such as emulsifiers and α -amylase enzyme. Incorporation of emulsifiers and enzyme decreased the hardness of Taftoon bread. Emulsifiers and α -amylase enzyme enhanced the flat bread dough quality. The sensory acceptability also improved with the addition of emulsifiers. Optimizing the amount of emulsifiers and enzyme required for reduction of bread hardness is vital because the quality and price of the final product depend on this parameter.     

EFFECTS OF GLUCOSE OXIDASE, HEMICELLULASE AND ASCORBIC ACID ON DOUGH AND BREAD QUALITY

ABSTRACT

In this study, glucose oxidase alone or its combinations with hemicellulase or ascorbic acid were used in bread making. Glucose oxidase alone mainly decreased dough extensibility. It produced stiffer and less extensible dough. Combinations of glucose oxidase–hemicellulase presented lower extensibility and were more resistant to extension than glucose oxidase alone. When glucose oxidase–ascorbic acid combinations were used, the softening degree significantly decreased, regardless when added the lowest glucose oxidase in combination with ascorbic acid. Glucose oxidase–ascorbic acid combinations significantly modified dough resistance. The glucose oxidase alone significantly increased specific loaf volume. The Dallman value of loaves made with glucose oxidase alone was found higher than for control. The most dramatic effect of additives on specific loaf volume was observed when glucose oxidase–hemicellulase combinations were added. This effect has been ascribed to redistribution of water from the hemicellulose to gluten, which would render the gluten more extensible. Specific loaf volume showed a significant enhancement when glucose oxidase–ascorbic acid combinations were added, but this effect was not as good as glucose oxidase–hemicellulase. The effects of glucose oxidase and its combinations with ascorbic acid and hemicellulase on dough rheology and bread quality are highly dependent on the amount of enzyme and the original wheat flour quality.

PRACTICAL APPLICATION

In practice, appropriate combinations of glucose oxidase with hemicellulase can be used as improvers in bread making, depending on their combination levels. This study will show the way to new research about glucose oxidase, ascorbic acid and hemicellulose.

     

INFLUENCE OF GUMS ON DOUGH PROPERTIES AND FLAT BREAD QUALITY OF TWO PERSIAN WHEAT VARIETIES

The effects of separate mixing of two hydrocolloids carboxymethylcellulose (CMC) and hydroxypropylmethylcellulose (HPMC) at 0.1, 0.3 and 0.5% levels with Sardary and Sorkheh wheat flours (two native Persian varieties) were studied. Chemical and rheological (Farinograph and Extensograph) tests, staling and sensory evaluations were performed on the two flours, their dough and the resulting Lavash flat bread, respectively. On the basis of split‐plot experiment in a complete random design and using the Duncan's multiple range tests, the data were evaluated and the average of replicates was compared at the statistical level of 1% (α = 0.01). Although the CMC and HPMC gums enhanced significantly the dough quality of the two wheat varieties by increasing water absorption and reducing resistances after 90 and 135 min (compared with control), the effect of HPMC was more pronounced than CMC. Anti‐staling properties of HPMC were better than CMC, especially for Sardary flour. Separate addition of 0.5% CMC and HPMC gums to Sorkheh and Sardary flours significantly delayed the staling process of the resulting Lavash bread by more than 45 and 42%, respectively. Additionally, sensory evaluation scores of the Lavash bread made from either Sorkheh flour containing 0.3% CMC or HPMC or Sardary flour containing 0.5% HPMC were 50 and 120% higher than control bread samples, respectively.     

EFFECT OF PENTOSANASE ON DOUGH AND BREAD PROPERTIES PRODUCED BY DIFFERENT TYPES OF FLOURS

ABSTRACT

The effects of pentosanase at different doses (20, 60 and 100 ppm) on physical dough properties and bread quality were studied using three types of wheat flours. Flour A was a regular bread flour, flour B had a high hardness ratio and protein content, and flour C was prepared from the same blend of flour A but had a high extraction ratio. Regarding farinograph data, water absorption values of the high extraction (86%) flour C and high hardness (65%) blend flour B increased with introduction of pentosanase. Extensibility values of the flours increased moderately with pentosanase addition, while resistance and energy values decreased. The volume of breads made with flours C and B decreased upon addition of pentosanase. But loaf volume of breads prepared with regular bread flour A with 50% hardness and 76% extraction rate increased with high levels of pentosanase addition. In conclusion, flour A as a regular bread flour gave satisfactory results with pentosanase supplementations, whereas the harder‐blend (65%) and higher‐extraction‐rate (85%) flours from the same cultivars did not.

PRACTICAL APPLICATIONS

Pentosanase addition was more effective on soluble pentosans than on insoluble ones. Because of these effects, it enhanced the bread‐making properties of regular flour more effectively than those of the high‐extraction and harder‐blend flours of the same cultivars.

     

EFFECT OF SODIUM METABISULFITE ADDITION AND BAKING TEMPERATURE ON MAILLARD REACTION IN BREAD

ABSTRACT

In this study, the effect of sodium metabisulfite (SMBS) doses (0, 25, 50, 100 mg/kg dough) and baking temperatures (200, 230 and 250C) on the physical, chemical and sensory properties of bread were researched to reduce 5‐hydroxymethyl‐2‐furfural (HMF) and acrylamide contents. HMF and acrylamide contents of bread crust were decreased significantly by increasing SMBS dose and decreasing baking temperature. The HMF (137.29 mg/kg) and acrylamide (671.44 µg/kg) contents of bread crust were decreased by 33 and 67%, respectively by addition of 100 mg/kg SMBS. The maltol content of bread crusts were significantly affected by baking temperature, and were 7.19, 10.23 and 22.69 mg/kg in breads baked at 200, 230 and 250C, respectively. No HMF, acrylamide and maltol were detected in the bread crumb. The sulfur dioxide content of the crust and crumb of control bread was 6.99 and 10.69 mg/kg, and increased by 49 and 59%, respectively at 100 mg/kg SMBS dose. All breads were evaluated as acceptable by a sensory panel.

PRACTICAL APPLICATIONS

Since Maillard reaction products such as acrylamide and 5‐hydroxymethyl‐2‐furfural (HMF) are known as toxic compounds, mitigation of these compounds is important subject for health and nutrition. There is not an efficient method to prevent the formation of acrylamide and HMF in bread crusts comparison with potato crisps. The purpose of this research is to slow down Maillard reaction by addition of sodium metabisulfite in bread‐making process. As a result of this research, acrylamide and HMF content of bread crusts decreased by 33 and 67%, respectively with acceptable sensory evaluation.     

苎麻纤维物理性能的研究

通过实验找出苎麻纤维的长度分布、细度(直径)分布以及长度和强度、细度(直径)和强度之间的关系。     

聚酯切片质量对FDY可纺性及丝条质量的影响

分析了聚酯切片各项指标如:熔点、粘度、凝胶粒子含量等对涤纶FDY可纺性及丝条质量(如强度、伸度、条干均匀度等)的影响。     

INFLUENCE OF HYDROXYPROPYL METHYLCELLULOSE ON THE RHEOLOGICAL AND MICROSTRUCTURAL CHARACTERISTICS OF WHOLE WHEAT FLOUR DOUGH AND QUALITY OF PURI

Puri is a traditional unleavened fried product prepared from whole wheat flour. Hydroxypropyl methylcellulose (HPMC) was used to study its effect on rheological characteristics of whole wheat flour dough and puri making quality. Addition of HPMC at 0.5 and 1.0% w/w increased the water absorption and dough stability whereas the resistance to extension and extensibility decreased. Pasting temperature, peak viscosity and cold paste viscosity gradually decreased. The moisture and fat contents of puri increased marginally. Quality parameters and sensory acceptability were monitored after 0 and 8 h of storage. Addition of 0.5% HPMC gave higher sensory scores. Microscopic observations during puri processing showed that the starch granules in the control dough were clearly visible in the protein matrix, which reduced on frying due to partial gelatinization. Microstructure of puri with HPMC showed higher gelatinization of starch. It also helped in moisture retention and hence, resulted in highly pliable and soft-textured puri .

PRACTICAL APPLICATIONS

Puri is a traditional unleavened fried product that is prepared by mixing whole wheat flour and water, sheeted to a desirable thickness and fried. Use of hydroxypropyl methylcellulose (HPMC) affected the whole wheat flour dough and puri making quality. It helped in moisture retention and hence, resulted in highly pliable and soft-textured puri . Microstructure of puri with HPMC showed higher gelatinization of starch.     

EFFECT OF BAKING INGREDIENTS AND MIXING DURATION ON DOUGH DEVELOPMENT, GAS RELEASE AND BREAD MAKING PROPERTIES

Three trials were carried out to determine the effect of wet gluten, acetic acid, fat, sodium chloride and mixing duration on dough development, gas release and bread characteristics using regression analysis. Maximum dough height was significantly affected by acetic acid, wet gluten, mixing duration and sodium chloride whereas maximum gas formation was significantly affected by acetic acid and sodium chloride levels. The addition of fat had significant effects on bread volume. Sodium chloride affected overall acceptability followed by wet gluten, mixing duration and fat levels. Bread volume and overall acceptability decreased with an increase in mixing duration. Increased levels of sodium chloride increased bread volume and overall acceptability and decreased CO₂ production. Addition of fat at a level of more than 3% caused a decrease in acceptability. Bread volume and acceptability progressively increased with the increase in wet gluten levels.