Green and blue-green phosphorescent heteroleptic iridium complexes containing carbazole-functionalized β-diketonate for non-doped organic light-emitting diodes

Two novel iridium complexes both containing carbazole-functionalized β-diketonate, Ir(ppy)₂(CBDK) [bis(2-phenylpyridinato-N,C²)iridium(1-(carbazol-9-yl)-5,5-dimethylhexane-2,4-diketonate)], Ir(dfppy)₂(CBDK) [bis(2-(2,4-difluorophenyl)pyridinato-N,C²)iridium(1-(carbazol-9-yl)-5,5-dimethylhexane-2,4-diketonate)] and two reported complexes, Ir(ppy)₂(acac) (acac = acetylacetonate), Ir(dfppy)₂(acac) were synthesized and characterized. The electrophosphorescent properties of non-doped device using the four complexes as emitter, respectively, with a configuration of ITO/N,N′-diphenyl-N,N′-bis(1-naphthyl)-1,1′-diphenyl-4,4′-diamine (NPB) (20 nm)/iridium complex (20 nm)/2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) (5 nm)/tris(8-hydroxyquinoline)aluminum (AlQ) (45 nm)/Mg_0.9Ag_0.1 (200 nm)/Ag (80 nm) were examined. In addition, a most simplest device, ITO/Ir(ppy)₂(CBDK) (80 nm)/Mg_0.9Ag_0.1 (200 nm)/Ag (80 nm), and two double-layer devices with configurations of ITO/NPB (30 nm)/Ir(ppy)₂(CBDK) (30 nm)/Mg_0.9Ag_0.1 (200 nm)/Ag (80 nm) and ITO/Ir(ppy)₂(CBDK) (30 nm)/AlQ (30 nm)/Mg_0.9Ag_0.1 (200 nm)/Ag (80 nm) were also fabricated and examined. The results show that the non-doped four-layer device for Ir(ppy)₂(CBDK) achieves maximum lumen efficiency of 4.54 lm/W and which is far higher than that of Ir(ppy)₂(acac), 0.53 lm/W, the device for Ir(dfppy)₂(CBDK) achieves maximum lumen efficiency of 0.51 lm/W and which is also far higher than that of Ir(dfppy)₂(acac), 0.06 lm/W. The results of simple devices involved Ir(ppy)₂(CBDK) show that the designed complex not only has a good hole transporting ability, but also has a good electron transporting ability. The improved performance of Ir(ppy)₂(CBDK) and Ir(dfppy)₂(CBDK) can be attributed to that the bulky carbazole-functionalized β-diketonate was introduced, therefore the carrier transporting property was improved and the triplet–triplet annihilation was reduced.     

Highly efficient bluish green phosphorescent organic light-emitting diodes based on heteroleptic iridium(III) complexes with phenylpyridine main skeleton

A new series of heteroleptic iridium(III) complexes, bis(2-phenylpyridinato-N,C2′)iridium (2-(2′,4′-difluorophenyl)-4-methylpyridine), (ppy)₂Ir(dfpmpy) and bis(2-(2′,4′-difluorophenyl)-4-methylpyridinato-N,C2′)iridium (2-phenylpyridine) (dfpmpy)₂Ir(ppy), have been synthesized by using phenylpyridine as a main skeleton for bluish green phosphorescent organic light-emitting diodes (PhOLEDs). The Ir(III) complexes showed high thermal stability and high photoluminescent (PL) quantum yields of 95% ± 4% simultaneously. As a result, the PhOLEDs with the heteroleptic Ir(III) complexes showed excellent performances approaching 100% internal quantum efficiency with a very high external quantum efficiency (EQE) of ∼27%, a low turn-on voltage of 2.4 V, high power efficiency of ∼85 lm/W, and very low efficiency roll-off up to 20,000 cd/m².     

A host material containing tetraphenylsilane for phosphorescent OLEDs with high efficiency and operational stability

A host material containing tetraphenylsilane moiety, 9-(4-triphenylsilanyl-(1,1′,4,1′′)-terphenyl-4′′-yl)-9H-carbazole (TSTC), was synthesized for green phosphorescent organic light emitting diodes. The tetraphenylsilane moiety was introduced to provide high triplet energy level, thermal and chemical stability, and glassy properties leading to high efficiency and operational stability of the devices. Ir(ppy)₃ based OLEDs using the TSTC host and DTBT (2,4-diphenyl-6-(4′-triphenylsilanyl-biphenyl-4-yl)-1,3,5-triazine) hole blocking layer (HBL) resulted in the maximum external quantum efficiency of 19.8% and the power efficiency of 59.4 lm/W. High operational stability with a half lifetime of 160,000 h at an initial luminance of 100 cd/m² was achieved from an electrophosphorescent device using TSTC host and BAlq HBL.     

Highly Efficient Orange and Green Solid‐State Light‐Emitting Electrochemical Cells Based on Cationic IrIII Complexes with Enhanced Steric Hindrance

Highly efficient orange and green emission from single‐layered solid‐state light‐emitting electrochemical cells based on cationic transition‐metal complexes [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂sb]PF₆ (where ppy is 2‐phenylpyridine, dFppy is 2‐(2,4‐difluorophenyl)pyridine, and sb is 4,5‐diaza‐9,9′‐spirobifluorene) is reported. Photoluminescence measurements show highly retained quantum yields for [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂ sb]PF₆ in neat films (compared with quantum yields of these complexes dispersed in m‐bis(N‐carbazolyl)benzene films). The spiroconfigured sb ligands effectively enhance the steric hindrance of the complexes and reduce the self‐quenching effect. The devices that use single‐layered neat films of [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂sb]PF₆ achieve high peak external quantum efficiencies and power efficiencies of 7.1 % and 22.6 lm W^–1) at 2.5 V, and 7.1 % and 26.2 lm W^–1 at 2.8 V, respectively. These efficiencies are among the highest reported for solid‐state light‐emitting electrochemical cells, and indicate that cationic transition‐metal complexes containing ligands with good steric hindrance are excellent candidates for highly efficient solid‐state electrochemical cells.     

Efficient hole-transporter for phosphorescent organic light emitting diodes with a simple molecular structure

N,N-diphenyl-4-(quinolin-8-yl)aniline (SQTPA), which composes a triphenylamine group and a quinoline group, has been synthesized and employed as a hole-transporter in phosphorescent OLEDs. It has been proved that SQTPA has efficient hole-transport property with a hole-mobility of 3.60 × 10⁻⁵ cm²/V s at the electric field of 800 (V/cm)^1/2, which is higher than that of NPB (1.93 × 10⁻⁵ cm²/V s). Blue, orange and green phosphorescent OLEDs have been fabricated based on FIrpic, Ir(2-phq)₃, Ir(ppy)₃ with typical structures by using SQTPA as the hole-transporter. The SQTPA-based devices show maximum external quantum efficiencies and power efficiencies of 17.5%, 32.5 lm/W for blue, 12.3%, 20.5 lm/W for orange and 20.3%, 64.5 lm/W for green. The performances of SQTPA-based devices are much better than that of NPB-based phosphorescent OLEDs with similar structures. Thought of its very simple molecular structure and easy synthetic route, SQTPA should be an efficient hole-transporter for phosphorescent OLEDs.     

High-color-rendering-index white polymer light-emitting electrochemical cells based on ionic host-guest systems: Utilization of blend films of blue-fluorescent cationic polyfluorenes and red-phosphorescent cationic iridium complexes

The authors present high-color-rendering-index (CRI) white polymer light-emitting electrochemical cells (PLECs) based on ionic host-guest systems. PLECs were fabricated with blend films composed of a blue fluorescent cationic π-conjugated polymer, poly(9,9-bis[6′-(N,N,N,-trimethylammonium)hexyl]fluorine-co-alt-1,4-phenylene)bromide (PFN⁺Br⁻), used as a host, and a red phosphorescent cationic iridium complex, [Ir(ppy)₂(biq)]⁺(PF₆)⁻ (where (ppy)⁻ = 2-phenylpyridinate and biq = 2,2′-biquinoline), used as a guest. By optimizing the composition of PFN⁺Br⁻ and [Ir(ppy)₂(biq)]⁺(PF₆)⁻ in the active layers, white light emission with Commission Internationale de l'Eclairage (CIE) coordinates of (x = 0.28, y = 0.31) and a very high CRI of 95.8 was achieved through mixing of blue and red light at an applied voltage of 4.0 V. The white light emissions were obtained at a low [Ir(ppy)₂(biq)]⁺(PF₆)⁻ concentration (PFN⁺Br⁻:[Ir(ppy)₂(biq)]⁺(PF₆)⁻ = 1:0.01 (mass ratio)), showing that [Ir(ppy)₂(biq)]⁺(PF₆)⁻ acts as a suitable energy acceptor. The emission mechanism of the ionic host-guest PLECs can be explained by Förster resonance energy transfer (FRET) and Dexter energy transfer (DET) from the excited PFN⁺Br⁻ to [Ir(ppy)₂(biq)]⁺(PF₆)⁻. Utilization of ionic host-guest PLECs is a very promising method for realizing white light-emitting devices with very high CRI.     

Unprecedented Homoleptic Bis‐Tridentate Iridium(III) Phosphors: Facile,Scaled‐Up Production,and Superior Chemical Stability

Bis‐tridentate Ir(III) metal complexes are expected to show great potential in organic light‐emitting diode (OLED) applications due to the anticipated, superb chemical and photochemical stability. Unfortunately, their exploitation has long been hampered by lack of adequate methodology and with inferior synthetic yields. This hurdle can be overcome by design of the first homoleptic, bis‐tridentate Ir(III) complex [Ir(pzpyph)(pz^Hpyph)] ( 1 ), for which the abbreviation (pzpyph)H (or pz^Hpyph) stands for the parent 2‐pyrazolyl‐6‐phenyl pyridine chelate. After that, methylation and double methylation of 1 afford the charge‐neutral Ir(III) complex [Ir(pzpyph)(pz^Mepyph)] ( 2 ) and cationic complex [Ir(pz^Mepyph)₂][PF₆] ( 3 ), while deprotonation of 1 gives formation of anionic [Ir(pzpyph)₂][NBu₄] ( 4 ), all in high yields. These bis‐tridentate Ir(III) complexes 2 – 4 are highly emitted in solution and solid states, while the charge‐neutral 2 and corresponding t ‐butyl substituted derivative [Ir(pzpy^Buph)(pz^Mepy^Buph)] ( 5 ) exhibit superior photostability versus the tris‐bidentate references [Ir(ppy)₂(acac)] and [Ir(ppy)₃] in toluene under argon, making them ideal OLED emitters. For the track record, phosphor 5 gives very small efficiency roll‐off and excellent overall efficiencies of 20.7%, 66.8 cd A^?1, and 52.8 lm W^?1 at high brightness of 1000 cd m^?2. These results are expected to inspire further studies on the bis‐tridentate Ir(III) complexes, which are judged to be more stable than their tris‐bidentate counterparts from the entropic point of view.     

Carbazole-bridged triphenylamine-bipyridine bipolar hosts for high-efficiency low roll-off multi-color PhOLEDs

Three new bipolar molecules composed of carbazole, triarylamine, and bipyridine were synthesized and utilized as host materials in multi-color phosphorescent OLEDs (PhOLEDs). These carbazole-based materials comprise a hole-transport triarylamine at C3 and an electron-transport 2,4′- or 4,4′-bipyridine at N9. The different bipyridine isomers and linking topology of the bipyridine with respect to carbazole N9 not only allows fine-tuning of physical properties but also imparts conformational change which subsequently affects molecular packing and carrier transport properties in the solid state. PhOLEDs were fabricated using green [(ppy)₂Ir(acac)], yellow [(bt)₂Ir(acac)], and red [(mpq)₂Ir(acac)] as doped emitters, which showed low driving voltage, high external quantum efficiency (EQE), and extremely low efficiency roll-off. Among these new bipolar materials, the 2Cz-44Bpy-hosted device doping with 10% (ppy)₂Ir(acac) as green emitting layer showed a high EQE of 22% (79.8 cd A⁻¹) and power efficiency (PE) of 102.5 lm W⁻¹ at a practical brightness of 100 cd m⁻². In addition, the device showed limited efficiency roll-off (21.6% EQE) and low driving voltage (2.8 V) at a practical brightness of 1000 cd m⁻².     

An efficient bis(2-phenylquinoline) (acetylacetonate) iridium(III)-based red organic light-emitting diode with alternating guest:host emitting layers

We report a highly efficient electrophosphorescent bis(2-phenylquinoline) (acetylacetonate) iridium(III) [Ir(2-phq)₂(acac)]-based red organic light-emitting diode. The emission layer consists of a periodic thin layer of guest material of Ir(2-phq)₂(acac) separated by host material of 4,4′-Bis(carbazol-9-yl)biphenyl. The guest and host thicknesses were optimized independently to obtain the best performance. The current efficiency reaches to a maximum of 16.2 cd/A then drops to 15 and 11 cd/A at brightness of 10 and 100 cd/m², respectively. By reducing the thickness of the host layer, the power efficiency was further improved. Device with a maximum power efficiency of 8.3 lm/W was obtained. We also found that the concentration quenching in Ir(2-phq)₂(acac) is dominated by molecular aggregation. Excitonic quenching by radiationless Förster process is miniscule.     

Blue‐Emitting Cationic Iridium Complexes with 2‐(1H‐Pyrazol‐1‐yl)pyridine as the Ancillary Ligand for Efficient Light‐Emitting Electrochemical Cells

Two blue‐emitting cationic iridium complexes with 2‐(1H‐pyrazol‐1‐yl)pyridine (pzpy) as the ancillary ligands, namely, [Ir(ppy)₂(pzpy)]PF₆ and [Ir(dfppy)₂(pzpy)]PF₆ (ppy is 2‐phenylpyridine, dfppy is 2‐(2,4‐difluorophenyl) pyridine, and PF₆^? is hexafluorophosphate), have been prepared, and their photophysical and electrochemical properties have been investigated. In CH₃CN solutions, [Ir(ppy)₂(pzpy)]PF₆ emits blue‐green light (475 nm), which is blue‐shifted by more than 100 nm with respect to the typical cationic iridium complex [Ir(ppy)₂(dtb‐bpy)]PF₆ (dtb‐bpy is 4,4′‐di‐tert‐butyl‐2,2′‐bipyridine); [Ir(dfppy)₂(pzpy)]PF₆ with fluorine‐substituted cyclometalated ligands shows further blue‐shifted light emission (451 nm). Quantum chemical calculations reveal that the emissions are mainly from the ligand‐centered ³π–π* states of the cyclometalated ligands (ppy or dfppy). Light‐emitting electrochemical cells (LECs) based on [Ir(ppy)₂(pzpy)]PF₆ gave green‐blue electroluminescence (486 nm) and had a relatively high efficiency of 4.3 cd A^?1 when an ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate was added into the light‐emitting layer. LECs based on [Ir(dfppy)₂(pzpy)]PF₆ gave blue electroluminescence (460 nm) with CIE (Commission Internationale de L'Eclairage) coordinates of (0.20, 0.28), which is the bluest light emission for iTMCs‐based LECs reported so far. Our work suggests that using diimine ancillary ligands involving electron‐donating nitrogen atoms (like pzpy) is an efficient strategy to turn the light emission of cationic iridium complexes to the blue region.     

Highly efficient solution-processed small-molecule white organic light-emitting diodes

Solution-processed small-molecule white organic light-emitting diodes (WOLEDs) were fabricated with a co-host of hole-transporter 4,4′,4″-Tris(carbazol-9-yl)triphenylamine (TCTA) and electron-transporter 2,7-Bis(diphenylphosphoryl)-9,9'-spirobifluorene (SPPO13). By doping 15 wt% FIrpic or F₃Irpic and 0.5 wt% Ir(MDQ)₂(acac) in to the TCTA/SPPO13 host, highly efficient white OLEDs have been achieved which exhibit nearly identical emission spectra at different luminance. The F₃Irpic and Ir(MDQ)₂(acac)-based WOLED shows maximum efficiencies of 40.9 cd/A, 36.7 lm/W and 16.9%, and even high efficiencies of 30.1 cd/A and 12.3% at the practical luminance of 1000 cd/m², which are among the highest efficiencies of the solution-processed small-molecule WOLEDs. These results demonstrate a convenient way to realize solution-processed WOLEDs with high efficiency and high spectral stability through full small-molecule materials system.     

New hole blocking material for green-emitting phosphorescent organic electroluminescent devices

The new amorphous molecular material, 2,5-bis(4-triphenylsilanyl-phenyl)-[1,3,4]oxadiazole, that functions as good hole blocker as well as electron transporting layer in the phosphorescent devices. The obtained material forms homogeneous and stable amorphous film. The new synthesized showed the reversible cathodic reduction for hole blocking material and the low reduction potential for electron transporting material in organic electroluminescent (EL) devices. The fabricated devices exhibited high performance with high current efficiency and power efficiency of 45 cd/A and 17.7 lm/W in 10 mA/cm², which is superior to the result of the device using BAlq (current efficiency: 31.5 cd/A and power efficiency: 13.5 lm/W in 10 mA/cm²) as well-known hole blocker. The ITO/DNTPD/α-NPD/6% Ir(ppy)₃ doped CBP/2,5-bis(4-triphenylsilanyl-phenyl)-[1,3,4]oxadiazole as both hole blocking and electron transporting layer/Al device showed efficiency of 45 cd/A and maximum brightness of 3000 cd/m² in 10 mA/cm².     

Electrical and optical characteristics of phosphorescent organic light-emitting device with thin-codoped layer insertion

In this paper, we demonstrated the changes of electrical and optical characteristics of a phosphorescent organic light-emitting device (OLED) with tris(phenylpyridine)iridium Ir(ppy)₃ thin layer (4 nm) slightly codoped (1%) inside the emitting layer (EML) close to the cathode side. Such a thin layer helped for electron injection and transport from the electron transporting layer into the EML, which reduced the driving voltage (0.40 V at 100 mA/cm²). Electroluminescence (EL) spectral shift at different driving voltage was observed in our blue OLED with [(4,6-di-fluoropheny)-pyridinato-N,C^2′]picolinate (FIrpic) emitter, which came from the recombination zone shift. With the incorporation of thin-codoped Ir(ppy)₃, such EL spectral shift was almost undetectable (color coordinate shift (0.000, 0.001) from 100 to 10,000 cd/m²), due to the compensation of Ir(ppy)₃ emission at low driving voltage. Such a methodology can be applied to a white OLED which stabilized the EL spectrum and the color coordinates ((0.012, 0.002) from 100 to 10,000 cd/m²).     

Charge conduction study of phosphorescent iridium compounds for organic light-emitting diodes application

The charge conduction properties of a series of iridium-based compounds for phosphorescent organic light-emitting diodes (OLEDs) have been investigated by thin-film transistor (TFT) technique. These compounds include four homoleptic compounds: Ir(ppy)₃, Ir(piq)₃, Ir(Tpa-py)₃, Ir(Cz-py)₃, and two heteroleptic compounds Ir(Cz-py)₂(acac) and FIrpic. Ir(ppy)₃, Ir(piq)₃ and FIrpic are commercially available compounds, while Ir(Tpa-py)₃, Ir(Cz-py)₃ and Ir(Cz-py)₂(acac) are specially designed to test their conductivities with respect to the commercial compounds. In neat films, with the exception of FIrpic, all Ir-compounds possess significant hole transporting capabilities, with hole mobilities in the range of about 5 × 10⁻⁶–2 × 10⁻⁵ cm² V⁻¹ s⁻¹. FIrpic, however, is non-conducting as revealed by TFT measurements. We further investigate how Ir-compounds modify carrier transport as dopants when they are doped into a phosphorescent host material CBP. The commercial compounds are chosen for the investigation. Small amounts of Ir(ppy)₃ and Ir(piq)₃ (<10%) behave as hole traps when they are doped into CBP. The hole conduction of the doped CBP films can be reduced by as much as 4 orders of magnitude. Percolating conduction of Ir-compounds occurs when the doping concentrations of the Ir-compounds exceed 10%, and the hole mobilities gradually increase as their values reach those of the neat Ir films. In contrast to Ir(ppy)₃ and Ir(piq)₃, FIrpic does not participate in hole conduction when it is doped into CBP. The hole mobility decreases monotonically as the concentration of FIrpic increases due to the increase of the average charge hopping distance in CBP.     

Improved hole-transporting properties of Ir complex-doped organic layer for high-efficiency organic light-emitting diodes

We have investigated the hole-transporting properties of three different Ir complexes doped 4,4′,4″-tri (N-carbazolyl) triphenylamine (TCTA) using a series of hole-only devices. The improvement of hole-transporting ability was depended on the species of Ir complexes and their doping concentrations. We attributed the improved performance to their strong electron-accepting abilities or hole-transfer capabilities. Yellow organic light-emitting diodes (OLEDs) based on bis(2-phenylbenzothiazolato)(acetylacetonate)iridium bt₂Ir(acac) were fabricated by utilizing this method with optimized doping concentration. The best electroluminescent (EL) performance of maximum 83.6 lm/W was obtained for the yellowing-emitting OLED by doping of Firpic into TCTA hole transport layer, compared with the cases of doping of Ir(ppy)₃ into TCTA and doping of Ir(bpiq)₂acac into TCTA. Moreover, the turn-on voltage of device decreased to 2.2 V, which was corresponding to the optical band gap of the emitter.     

High efficiency, solution-processed, red phosphorescent organic light-emitting diodes from a polymer doped with iridium complexes

High efficiency, solution-processed, red emissive phosphorescent organic light-emitting diodes (PhOLEDs) have been developed. The PhOLEDs utilize bis[9-ethyl-3-(4-phenylquinolin-2-yl)-9H-carbazolato-N,C²′]iridium picolinate (Et-Cvz-PhQ)₂Ir(pic) and bis[9-(2-(2-methoxyethoxy)ethyl)-3-(4-phenylquinolin-2-yl)-9H-carbazolato-N,C²′]iridium picolinate (EO-Cvz-PhQ)₂Ir(pic) in a nonconjugated polymer host of PVK that contains the electron transport material of OXD-7 and the hole transport material TPD. The electroluminescence (EL) spectra of the PhOLEDs parallel those of (Et-Cvz-PhQ)₂Ir(pic) and (EO-Cvz-PhQ)₂Ir(pic) with maxima at 608 nm and a CIE (Commission International de l’Eclairage) coordinate of (0.62, 0.38). The red emitting PhOLEDs, based on ITO/PEDOT:PSS/PVK:OXD-7:TPD:Ir complex/cathode configuration, have a maximum external quantum efficiency of 10.6% and a luminance efficiency of 17.5 cd/A. The efficiency is significantly higher than those obtained using common solution-processed red emissive PhOLEDs.     

Efficient single layer RGB phosphorescent organic light-emitting diodes

We report efficient single layer red, green, and blue (RGB) phosphorescent organic light-emitting diodes (OLEDs) using a “direct hole injection into and transport on triplet dopant” strategy. In particular, red dopant tris(1-phenylisoquinoline)iridium [Ir(piq)₃], green dopant tris(2-phenylpyridine)iridium [Ir(ppy)₃], and blue dopant bis(3,5-difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl)iridium [FIrpic] were doped into an electron transporting 1,3,5-tris(N-phenylbenzimidazole-2-yl)benzene (TPBi) host, respectively, to fabricate RGB single layer devices with indium tin oxide (ITO) anode and LiF/Al cathode. It is found that the maximum current efficiencies of the devices are 3.7, 34.5, and 6.8 cd/A, respectively. Moreover, by inserting a pure dopant buffer layer between the ITO anode and the emission layer, the efficiencies are improved to 4.9, 43.3, and 9.8 cd/A, respectively. It is worth noting that the current efficiency of the green simplified device was as high as 34.6 cd/A, even when the luminance was increased to 1000 cd/m² at an extremely low applied voltage of only 4.3 V. A simple accelerated aging test on the green device also shows the lifetime decay of the simplified device is better than that of a traditional multilayered one.     

Extremely low driving voltage electrophosphorescent green organic light-emitting diodes based on a host material with small singlet–triplet exchange energy without p- or n-doping layer

In order to achieve low driving voltage, electrophosphorescent green organic light-emitting diodes (OLEDs) based on a host material with small energy gap between the lowest excited singlet state and the lowest excited triplet state (ΔE_ST) have been fabricated. 2-biphenyl-4,6-bis(12-phenylindolo[2,3-a] carbazole-11-yl)- 1,3,5-triazine (PIC–TRZ) with ΔE_ST of only 0.11 eV has been found to be bipolar and used as the host for green OLEDs based on tris(2-phenylpyridinato) iridium(III) (Ir(ppy)₃). A very low onset voltage of 2.19 V is achieved in devices without p- or n-doping. Maximum current and power efficiencies are 68 cd/A and 60 lm/W, respectively, and no significant roll-off of current efficiency (58 cd/A at 1000 cd/m² and 62 cd/A at 10,000 cd/m²) have been observed. The small roll-off is due to the improved charge balance and the wide charge recombination zone in the emissive layer.     

Green and blue–green light-emitting electrochemical cells based on cationic iridium complexes with 2-(4-ethyl-2-pyridyl)-1H-imidazole ancillary ligand

The ionic iridium complexes, [Ir(ppy)₂(EP-Imid)]PF₆ (Complex 1) and [Ir(dfppy)₂(EP-Imid)]PF₆ (Complex 2) are used as the light-emitting material for the fabrication of light-emitting electrochemical cells (LECs). These complexes have been synthesized, employing 2-(4-ethyl-2-pyridyl)-1H-imidazole (EP-Imid) as the ancillary ligand, 2-phenylpyridine (ppy) and 2-(2,4-difluorophenyl)pyridine (dfppy) as the cyclometalated ligands, which were characterized by various spectroscopic, photophysical and electrochemical methods. The photoluminescence (PL) emission spectra in acetonitrile solution show blue–green and blue light emission for Complexes 1 and 2 respectively. However, LECs incorporating these complexes resulted in green (522 nm) light emission for Complex 1 with the Commission Internationale de L’Eclairage (CIE) coordinates of (0.33, 0.56) and blue–green (500 nm) light emission for Complex 2 with the CIE coordinates of (0.24, 0.44). Using Complex 1, a maximum luminance of 1191 cd m⁻² and current efficiency of 1.0 cd A⁻¹ are obtained while that of Complex 2 are 741 cd m⁻² and 0.88 cd A⁻¹ respectively.     

1.54 μm Near-infrared photoluminescent and electroluminescent properties of a new Erbium (III) organic complex

The crystal structure of Er(PM)₃(TP)₂ [PM = 1-phenyl-3-methyl-4-isobutyryl-5-pyrazolone, TP = triphenyl phosphine oxide] was reported and its photoluminescence properties were studied by UV–vis absorption, excited, and emission spectra. The Judd–ofelt theory was introduced to calculate the radiative transition rate and the radiative decay time of 3.65 ms for the ⁴I_13/2 → ⁴I_15/2 transition of Er³⁺ ion in this complex. The antenna-effect and phonon-assisted energy-transfer were introduced to discuss the intramolecular energy transfer from ligands to Er³⁺ ion. Based on this Er(III) complex as the emitter, the multilayer phosphorescent organic light emitting diode was fabricated with the structure of ITO/NPB 20 nm/Er(PM)₃(TP)₂ 50 nm/BCP 20 nm/AlQ 40 nm/LiF 1 nm/Al 120 nm, which shows the typical 1.54 μm near-infrared (NIR) emission from Er³⁺ ion with the maximum NIR irradiance of 0.21 μW/cm².