新型有机电致蓝色磷光器件的研究

设计了一种Ge/Si波导集成型雪崩光电二极管(APD)。器件采用将Si波导层置于Ge吸收层之下的结构,光经波导层进入吸收层只需一次耦合,降低了光的损耗,提高了光的吸收率和光电流。采用silvaco软件对器件的结构和性能进行仿真,结果表明:器件的雪崩击穿电压为-28V,最大内量子效率达到89%,在1.15~1.60μm范围内具有较高响应度,峰值波长位于1.31μm,单位响应度最高达0.74A/W,3dB带宽为10GHz。 更多还原     

Highly Efficient Greenish‐Yellow Phosphorescent Organic Light‐Emitting Diodes Based on Interzone Exciton Transfer

Phosphorescent organic light emitting diodes (PHOLEDs) have undergone tremendous growth over the past two decades. Indeed, they are already prevalent in the form of mobile displays, and are expected to be used in large‐area flat panels recently. To become a viable technology for next generation solid‐state light source however, PHOLEDs face the challenge of achieving concurrently a high color rendering index (CRI) and a high efficiency at high luminance. To improve the CRI of a standard three color white PHOLED, one can use a greenish‐yellow emitter to replace the green emitter such that the gap in emission wavelength between standard green and red emitters is eliminated. However, there are relatively few studies on greenish‐yellow emitters for PHOLEDs, and as a result, the performance of greenish‐yellow PHOLEDs is significantly inferior to those emitting in the three primary colors, which are driven strongly by the display industry. Herein, a newly synthesized greenish‐yellow emitter is synthesized and a novel device concept is introduced featuring interzone exciton transfer to considerably enhance the device efficiency. In particular, high external quantum efficiencies (current efficiencies) of 21.5% (77.4 cd/A) and 20.2% (72.8 cd/A) at a luminance of 1000 cd/m² and 5000 cd/m², respectively, have been achieved. These efficiencies are the highest reported to date for greenish‐yellow emitting PHOLEDs. A model for this unique design is also proposed. This design could potentially be applied to enhance the efficiency of even longer wavelength yellow and red emitters, thereby paving the way for a new avenue of tandem white PHOLEDs for solid‐state lighting.     

Stable efficiency roll-off in blue phosphorescent organic light-emitting diodes by host layer engineering

The device characteristics of blue phosphorescent organic light-emitting diodes (PHOLEDs) with mixed host structure were investigated by changing the combination and the composition of host materials in emissive layer. The distributed recombination zone and balanced charge carrier injection within emissive layer were achieved through mixed host optimization with a hole transport-type and an electron transport-type host materials, therefore the device performances were greatly enhanced, with external quantum and power efficiencies of 21.8% and 53 lm/W. Moreover, mixed host blue PHOLEDs exhibited a extremely low stable efficiency roll-off with quantum efficiencies of 20.3% and 18.6% at a luminance of 1000 and 10,000 cd/m².     

High efficiency green phosphorescent organic light-emitting diodes with a low roll-off at high brightness

Highly efficient green phosphorescent organic light-emitting diodes (PHOLEDs) with low efficiency roll-off at high brightness have been demonstrated with a novel iridium complex. The host material 1,3-bis(carbazol-9-yl)benzene (mCP) with high triplet energy is also used as the hole transporting layer to avoid carrier accumulation near the exciton formation interface and reduce exciton quenching. It provides a new approach for easily fabricating PHOLED with high triplet energy emitter. Moreover, the hole blocking layer is extended into the light emitting layer to form a co-host, realizing better control of the carrier balance and broader recombination zone. As a consequence, a maximum external quantum efficiency of 20.8% and current efficiency of 72.9 cd/A have been achieved, and maintain to 17.4% and 60.7 cd/A even at 10,000 cd/m², respectively.     

High morphology stability and ambipolar transporting host for use in blue phosphorescent single-layer organic light-emitting diodes

The authors report a small molecule host of 2,7-bis(diphenylphosphoryl)-9-[4-(N,N-diphenylamino)phenyl]-9-phenylfluorene (POAPF) doped with 8 wt% iridium(III)-bis[(4,6-difluorophenyl)pyridinato-N,C^2′]picolinate (FIrpic) for use in efficient and single-layer blue phosphorescent organic light-emitting diodes (PHOLEDs) exhibiting a maximum external quantum efficiency of ∼20.3% at brightness of 100 cd/m². The high performance of such single layer PHOLEDs is attributed to the POAPF host’s high morphological stability, suitable triplet energy level, and equal charge carrier mobilities of hole and electron to form the broad carrier recombination zone in the emitting layer, thus reducing the triplet-triplet annihilation and resulting in a slight efficiency roll off of 0.5% from the brightness of 1 and 1000 cd/m². This work also systematically investigated the arrangement of the POAPF:FIrpic recombination zone for optimizing the performance of the single layer PHOLED.     

Towards High Efficiency and Low Roll‐Off Orange Electrophosphorescent Devices by Fine Tuning Singlet and Triplet Energies of Bipolar Hosts Based on Indolocarbazole/1, 3, 5‐Triazine Hybrids

Orange‐emitting phosphorescent organic light‐emitting diodes (PHOLEDs) are drawing more and more attention; however, high‐performance hosts designed for orange PHOLEDs are rare. Here, four indolocarbazole/1, 3, 5‐triazine hybrids are synthesized to optimize the singlet and triplet energies, as well as transporting properties, for ideal orange PHOLEDs. By introducing moieties with different electronegativity, a graded reduction of the singlet and triplet energies is achieved, resulting in minimum injection barrier and minimum energy loss. Besides, the charge transporting abilities are also tuned to be balanced on the basis of the bipolar features of those materials. The optimized orange PHOLED shows a maximum external quantum efficiency (EQE) of 24.5% and a power efficiency of 64 lm W^–1, both of which are among the best values for orange PHOLEDs. What is more, the efficiency roll‐off is extremely small, with an EQE of 24.4% at 1000 cd m^–2 and 23.8% at 10 000 cd m^–2, respectively, which is the lowest efficiency roll‐off for orange PHOLEDs to date, resulting in the highest EQE for orange PHOLEDs when the luminance is above 1000 cd m^–2. Besides the balanced charges, the small roll‐off is also attributed to the wide recombination zone resulting from the bipolar features of the hosts.     

Aminoborane-based bipolar host material for blue and white-emitting electrophosphorescence devices

A novel aminoborane-based host material, 9-(dimesitylboryl)-9′-phenyl-9H, 9′H-3,3′-bicarbazole (BCzBMes) was developed for blue and white phosphorescent OLEDs (PHOLEDs). The thermal, photophysical and electrochemical properties were systematically investigated. BCzBMes not only has a high triplet energy but also shows a bipolar behavior. To validate the superior properties of BCzBMes, blue and white PHOLEDs were fabricated using BCzBMes as a bipolar host material. A blue PHOLED containing Bis(4,6-difluorophenylpyridinato-N,C2)picolinatoiridium (FIrPic) as a dopant exhibited excellent performance with a maximum external quantum efficiency (EQE) of 16.7%. In particular, the blue PHOLED exhibited an extraordinary low efficiency roll-off of 10.1% at a brightness of 5000 cd/m². Meanwhile, an all-phosphor near-white device hosted by BCzBMes was also fabricated, and a high EQE of 18.8% was achieved. This excellent performance suggests that BCzBMes is a potential bipolar host material for the PHOLEDs.     

Very High Efficiency Orange‐Red Light‐Emitting Devices with Low Roll‐Off at High Luminance Based on an Ideal Host–Guest System Consisting of Two Novel Phosphorescent Iridium Complexes with Bipolar Transport

Two phosphorescent iridium complexes with bipolar transporting ability, namely FPPCA (500 nm) and BZQPG (600 nm), are synthesized and employed as an ideal host‐guest system for phosphorescent organic light emitting diodes (PHOLEDs).The devices give very high‐efficiency orange‐red emission from BZQPG with maximum external quantum efficiency (EQE or η_ext) of >27% and maximum power efficiency (PE or η_p) of >75 lm/W, and maintain high levels of 26% and 55 lm/W, 25% and 40 lm/W at high luminance of 1000 and 5000 cd m^?2, respectively, within a range of 8–15 wt% of BZQPG. The realization of such high and stable EL performance results from the coexistence of two parallel paths: i) effective energy transfer from host (FPPCA) to guest (BZQPG) and ii) direct exciton formation on the BZQPG emitter, which can alternately dominate the electrophosphorescent emission. This all‐phosphor doping system removes the charge‐injection barrier from the charge‐transport process to the emissive layer (EML) due to the inherent narrow E_g of both phosphors. Therefore, this ideal host–guest system represents a new design to produce PHOLEDs with high efficiency and low efficiency roll‐off using a simple device configuration.     

Soluble processed low-voltage and high efficiency blue phosphorescent organic light-emitting devices using small molecule host systems

We report low voltage driving and highly efficient blue phosphorescence organic light emitting diodes (PHOLEDs) fabricated by soluble process. A soluble small molecule mixed host system consisting of hole transporting 4,4’,4’’ tris(N-carbazolyl)triphenylamine (TCTA) and bipolar carrier transporting 2,6-bis(3-(carbazol-9-yl)phenyl)pyridine (26DCzPPy) exhibits high solubility with smooth surface properties. Moreover, this small molecule host shows the smoothest morphological property similar to a vacuum deposited amorphous film. A low driving voltage of 5.4 V at 1000 cd/m² and maximum external quantum efficiency 14.6% obtained in the solution processed blue PHOLEDs are useful for large area low cost manufacturing.     

Synthesis and device properties of mCP analogues based on fused-ring carbazole moiety

Novel mCP analogues consisting of blue phosphorescent host materials with fused-ring, 1,3-bis(5H-benzofuro[3,2-c]carbazol-5-yl)benzene (BFCz) and 1,3-bis(5H-benzo[4,5]thieno[3,2-c]carbazol-5-yl)benzene (BTCz) were designed and synthesized using benzofurocarbazole and benzothienocarbazole donor moieties. BFCz and BTCz exhibit high glass transition temperatures of 147 and 157 °C, respectively, and high triplet bandgaps of 2.94 and 2.93 eV, respectively. To explore the electroluminescence properties of these materials, multilayer blue phosphorescent organic light-emitting diodes (PHOLEDs) were fabricated in the following device structure: indium–tin-oxide (ITO)/PEDOT:PSS/4,4’-cyclohexylidene bis[N,N-bis(4-methylphenyl)aniline] (TAPC)/1,3-bis(N-carbazolyl) benzene (mCP)/host:FIrpic/diphenylphosphine oxide-4-(triphenylsilyl)phenyl (TSPO1)/LiF)/Al. The PHOLEDs with BTCz exhibited efficient blue emission with luminous and quantum efficiencies of 30.9 cd/A and 15.5% at 1000 cd/m², respectively.     

4, 6-Bis[3-(dibenzothiophen-2-yl)phenyl] pyrimidine bipolar host for bright,efficient and low efficiency roll-off phosphorescent organic light-emitting devices

A bipolar host 4, 6-Bis[3-(dibenzothiophen-2-yl)phenyl] pyrimidine (DBTPhPm) with small singlet-triplet splitting has been synthesized and confirmed through a series of photophysical and electrochemical properties. Monochromatic phosphorescent organic light-emitting devices (PHOLEDs) based on different hosts [(4,4′-N,N'-dicarbazole) biphenyl, 2,7-bis (diphenylphosphoryl)-9-[4-(N,Ndiphenylamino) phenyl]-9-phenylfluorene, (3,3'-bicarbazole) phenyl and DBTPhPm] and dopants are fabricated. Compared to other hosts, the DBTPhPm-based PHOLEDs exhibited high brightness, high efficiency and low efficiency roll-off. The maximum power efficiency of the DBTPhPm-based red (R), green (G), blue (B), yellow (Y), and orange (O) PHOLEDs are 12.2, 47.2, 17.6, 42.6 and 15.1 lm/W, respectively. The current efficiency roll-off of the R, G, B, Y, and O PHOLEDs are 29.8%, 8.6%, 18.2%, 5.9%, and 22.4% from the maximum current efficiency to the high brightness of 5000 cd/m². The detailed working mechanism of the DBTPhPm-based device is discussed.     

Water‐Soluble Lacunary Polyoxometalates with Excellent Electron Mobilities and Hole Blocking Capabilities for High Efficiency Fluorescent and Phosphorescent Organic Light Emitting Diodes

High performance solution‐processed fluorescent and phosphorescent organic light emitting diodes (OLEDs) are achieved by water solution processing of lacunary polyoxometalates used as novel electron injection/transport materials with excellent electron mobilities and hole blocking capabilities. Green fluorescent OLEDs using poly[(9,9‐dioctylfluorenyl‐2,7‐diyl)‐co‐(1,4‐benzo‐{2,1′,3}‐thiadiazole)] (F8BT) as the emissive layer and our polyoxometalates as electron transport/hole blocking layers give a luminous efficiency up to 6.7 lm W^?1 and a current efficiency up to 14.0 cd A^?1 which remained nearly stable for about 500 h of operation. In addition, blue phosphorescent OLEDs (PHOLEDs) using poly(9‐vinylcarbazole) (PVK):1,3‐bis[2‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazo‐5‐yl]benzene (OXD‐7) as a host and 10.0 wt% FIrpic as the blue dopant in the emissive layer and a polyoxometalate as electron transport material give 12.5 lm W^?1 and 30.0 cd A^?1 power and luminous efficiency, respectively, which are among the best performance values observed to date for all‐solution processed blue PHOLEDs. The lacunary polyoxometalates exhibit unique properties such as low electron affinity and high ionization energy (of about 3.0 and 7.5 eV, respectively) which render them as efficient electron injection/hole blocking layers and, most importantly, exceptionally high electron mobility of up to 10^?2 cm² V^?1 s^?1.     

Dependence of Light‐Emitting Characteristics of Blue Phosphorescent Organic Light‐Emitting Diodes on Electron Injection and Transport Materials

We investigate the light‐emitting performances of blue phosphorescent organic light‐emitting diodes (PHOLEDs) with three different electron injection and transport materials, that is, bathocuproine(2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline) (Bphen), 1,3,5‐tri(m‐pyrid‐3‐yl‐phenyl)benzene (Tm3PyPB), and 2,6‐bis(3‐(carbazol‐9‐yl)phenyl)pyridine (26DCzPPy), which are partially doped with cesium metal. We find that the device characteristics are very dependent on the nature of the introduced electron injection layer (EIL) and electron transporting layer (ETL). When the appropriate EIL and ETL are combined, the peak external quantum efficiency and peak power efficiency improve up to 20.7% and 45.6 lm/W, respectively. Moreover, this blue PHOLED even maintains high external quantum efficiency of 19.6% and 16.9% at a luminance of 1,000 cd/m² and 10,000 cd/m², respectively.     

Orthogonally substituted aryl derivatives as bipolar hosts for blue phosphorescent organic light-emitting diodes

Four novel bipolar hosts, namely 9,9′-(2-(4,6-diphenylpyrimidin-2-yl)-1,3-phenylene)bis(9H-carbazole) (2CzPm), 9,9′-(2-(4,6-diphenylpyrimidin-2-yl)-1,3-phenylene)bis(3,6-di-tert-butyl-9H-carbazole) (2TCzPm), 5,5′-(2-(4,6-diphenylpyrimidin-2-yl)-1,3-phenylene)bis(5H-benzofuro[3,2-c]carbazole) (2BFCzPm) and 5,5′-(2-(4,6-diphenyl-1,3,5-triazin-2-yl)-1,3-phenylene)bis(5H-benzofuro[3,2-c]carbazole) (2BFCzTrz) were designed and synthesized with diphenylpyrimidine and diphenyltriazine as electron-transporting units and carbazole derivatives as hole-transporting motifs for the application in blue phosphorescent organic light-emitting diodes (PHOLEDs). These electron-accepting and -donating functional groups were attached to the central phenylene bridge in an ortho-substituted fashion, which led to high triplet energies (2.97–3.00 eV) and wide bandgap (3.43–3.55 eV). The effect of modulation of electron-accepting and donating groups on the photophysical properties, frontier orbital energy levels, charge carrier transport properties and device performance of these four hosts has been investigated. 2BFCzPm and 2BFCzTrz featured with large conjugation system exhibited high thermal stability as compared to 2CzPm and 2TCzPm. The bis[2-(4,6-difluorophenyl)-pyridinato-C2,N](picolinato)iridium(III) (FIrpic) based blue PHOLEDs hosted by 2BFCzPm exhibited excellent electroluminescence performance with a peak current efficiency of 38.2 cd/A and a maximum external quantum efficiency of 19.0%, which could be ascribed to the enhanced thermal stability, high triplet energy and good bipolar charge transport properties of the host material.     

Highly efficient phosphorescent organic light-emitting diodes using a beryllium metal–chelate complex as electron-transporting host material

A classical fluorescent metal–chelate complex bis(2-(2-hydroxyphenyl)-pyridine)beryllium (Bepp₂) has been used as an efficient electron-transporting host material to construct highly efficient phosphorescent organic light-emitting diodes (PHOLEDs) with an orange-emitting phosphorescent guest bis(7,8-benzoquinolinato) iridium (III) (N,N′-diisopropyl-benzamidine) ((bzq)₂Ir(dipba)). Due to the well-matched energy levels of Bepp₂ with the corresponding hole-/electron- transporting (HT/ET) materials and the high-efficiency and complete energy transfer of this host–guest system, the Bepp₂-based PHOLEDs exhibit rather low driving voltage (2.8 V) and high peak EL efficiencies of over 70 cd A⁻¹ for luminous efficiency, 55 lm W⁻¹ for power efficiency, and 23% for external quantum efficiency, a performance significantly better than that using CBP as the host.     

Efficient,color-stable flexible white top-emitting organic light-emitting diodes

Flexible white top-emitting organic light-emitting diodes (WTEOLEDs) with red and blue phosphorescent dual-emitting layers were fabricated onto polyethylene terephthalate (PET) substrates. By inserting a 2-nm thin tris(phenypyrazole)iridium between the red and the blue emitters as an electron/exciton blocking layer, significant improvements on luminous efficiency and color stability were observed, reaching 9.9 cd/A (3.74 lm/W) and a small chromaticity change of (0.019, 0.011) in a wide luminance range of 80–5160 cd/m². The origin on color stability was explored by analyzing the electroluminescent spectra, the time-resolved transient photoluminescence decay lifetimes of phosphors, and the tunneling phenomenon. In addition, mechanical bending lifetimes in WTEOLEDs with spin-coated     

Green phosphorescent organic light-emitting devices based on different electron transport layers combining with fluorescent sub-monolayer

We report a small molecule host of 4,4(-N,N)-dicarbazole-biphenyl (CBP) doped with 8% tris(2-phenylpyridine) iridium (Irppy3) for use in efficient green phosphorescent organic light-emitting devices (PHOLEDs) combined with different electron transport layers of Alq and BAlq. The PHOLEDs exhibit maximum current efficiency and power efficiency of 19.8 cd/A and 6.21 lm/W, respectively. The high performance of such PHOLEDs is attributed to the better electron mobile ability of BAlq and sub-monolayer quinacridone (QAD) as carrier trapping layer and equal charge carrier mobilities of hole and electron to form the broad carrier recombination zone in the emitting layer, which can reduce the triplet-triplet annihilation and improve the efficiency of the device. #$TABThis work has been supported by the Major Project of Science and Technology Office of Fujian Province of China (No.2014H0042), the Natural Science Foundation of Fujian Province of China (No.2015J01664), the Project of Science and Technology Research of Quanzhou in Fujian Province of China (Nos.2013Z125 and 2014Z137), and the 2016 Annual National or Ministries Preparatory Research Foundation Project in Quanzhou Normal University (No.2016YYKJ21). E-mail:yanghuishan1697@163.com      

Deep blue phosphorescent organic light-emitting diodes with excellent external quantum efficiency

Highly efficient deep blue phosphorescent organic light-emitting diodes (PHOLEDs) using two heteroleptic iridium compounds, (dfpypy)₂Ir(acac) and (dfpypy)₂Ir(dpm), as a dopant and 9-(3-(9H-carbazol-9-yl)phenyl)-9H-carbazol-3-yl)diphenylphosphine oxide as a host material have been developed. The electroluminescent device of (dfpypy)₂Ir(dpm) at the doping level of 3 wt% shows the best performance with external quantum efficiency of 18.5–20.4% at the brightness of 100–1000 cd/m² and the color coordinate of (0.14, 0.18) at 1000 cd/m².     

Insights into charge balance and its limitations in simplified phosphorescent organic light-emitting devices

Simplified phosphorescent organic light-emitting device (PHOLED), which utilizes only two organic layers, showed record-high efficiency when first introduced. It is quite surprising that this device can have such high efficiency without the use of complex carrier and exciton confinement layers that are common in the state-of-the-art PHOLEDs nowadays. Therefore, it is important to understand how good charge balance is in simplified PHOLED and why. In this work, we study the effects of altering charge balance in simplified PHOLED through means of changing layer thickness in the hole transport layer (HTL) and electron transport layer (ETL) as well as intentionally doping hole and electron traps in the HTL and ETL, respectively, on device efficiency. The results show that when using high carrier mobility charge transport materials, changing layer thickness does not impact charge balance appreciably. On the other hand, introducing charge traps in a thin layer within the HTL or ETL can, in comparison, influence charge balance more significantly, and proves to be a more effective approach for studying the factors limiting charge balance in these devices. The results reveal that simplified PHOLEDs are generally hole-rich, and that the leakage of electrons to the counter electrode is also a major mechanism behind the poor charge balance and efficiency loss in these devices. In order to optimize charge balance in simplified PHOLED, it is important to reduce hole transport in the device so that e-h ratio can be brought closer to unity, as well as eliminate electron leakage. Finally, we show that by simply using an electron blocking HTL, the efficiency of the device can be enhanced by as much as 25%, representing the highest reported for simplified PHOLEDs.     

A Multifunctional Blue‐Emitting Material Designed via Tuning Distribution of Hybridized Excited‐State for High‐Performance Blue and Host‐Sensitized OLEDs

Actualizing full singlet exciton yield via a reverse intersystem crossing from the high‐lying triplet state to singlet state, namely, “hot exciton” mechanism, holds great potential for high‐performance fluorescent organic light‐emitting diodes (OLEDs). However, incorporating comprehensive insights into the mechanism and effective molecular design strategies still remains challenging. Herein, three blue emitters (CNNPI, 2TriPE‐CNNPI, and 2CzPh‐CNNPI) with a distinct local excited (LE) state and charge‐transfer (CT) state distributions in excited states are designed and synthesized. They show prominent hybridized local and charge‐transfer (HLCT) states and aggregation‐induced emission enhancement properties. The “hot exciton” mechanism based on these emitters reveals that a balanced LE/CT distribution can simultaneously boost photoluminescence efficiency and exciton utilization. In particular, a nearly 100% exciton utilization is achieved in the electroluminescence (EL) process of 2CzPh‐CNNPI. Moreover, employing 2CzPh‐CNNPI as the emitter, emissive dopant, and sensitizing host, respectively, the EL performances of the corresponding nondoped pure‐blue, doped deep‐blue, and HLCT‐sensitized fluorescent OLEDs are among the most efficient OLEDs with a “hot exciton” mechanism to date. These results could shed light on the design principles for “hot exciton” materials and inspire the development of next‐generation high‐performance OLEDs.