Effects of rare earth on inclusions and corrosion resistance of 10PCuRE weathering steel

The types,morphologies and distributions of nonmetallic inclusions in Cu-P weathering steels with and without rare earth were analyzed through a quantitative image analyzer,scanning electron microscopy(SEM)and energy dispersive spectroscopy(EDS)attached to SEM.Solid-soluble content of rare earth in the steels was analyzed by non-aqua electroanalysis and ICP.The results showed that rare earth modified the types and the morphologies of inclusions in the weathering steels.The small spherical rare earth oxysulfides and rare earth sulphides replaced the elongated MnS inclusions in the RE weathering steels.The rare earth inclusions dispersedly distributed and most inclusions were smaller than 2 μm in size.The optimum content of RE was 0.0065%-0.016% for 10PCuRE weathering steels containing about0.002% oxygen and 0.004% sulfur.Solid-soluble content of rare earth in steels was(14-20)x 10-6,which can act as a micro-alloying element.The corrosion resistance of 10PCuRE weathering steels and Q235 were studied by dry-wet cyclic immersion test.Their corrosion rates were obtained respectively.The polarization curves and pitting corrosion behaviors of weathering steels with and without rare earth were measured by electrochemical methods.The corrosion resistance of Cu-P weathering steels was improved by adding an appropriate amount of rare earth.Less and fewer rare earth inclusions largely decreased pitting susceptibility and rate of pit propagation.The pitting potential and the resistance against pitting corrosion of the RE weathering steel were significantly improved due to the modification of rare earth to inclusions.     

Lanthanide NIR luminescence for telecommunications, bioanalyses and solar energy conversion

Present-day advanced technologies heavily rely on the exciting magnetic and spectroscopic properties of lanthanide ions. In particular, their ability to generate well-characterized and intense near-infrared (NIR) luminescence is exploited in any modern fiber-optic telecommunication network. In this feature article, we first summarize the whereabouts underlying the design of highly luminescent NIR molecular edifices and materials. We then focus on describing the main trends in three applications related to this spectral range: telecommunications, biosciences, and solar energy conversion. In telecommunications, efforts concentrate presently on getting easily processable polymer-based waveguide amplifiers. Upconversion nanophosphors emitting in the visible after NIR excitation are now ubiquitous in many bioanalyses while their application to bio-imaging is still in its early stages; however, highly sensitive NIR-NIR systems start to be at hand for both in vitro and in vivo imaging, as well as dual probes combining magnetic resonance and optical imaging. Finally, both silicon-based and dye-sensitized solar cells benefit from the downconversion and upconversion capabilities of lanthanide ions to harvest UV and NIR solar light and to boost the overall quantum efficiency of these next-generation devices.     

Evaluation of D113 cation exchange resin for the removal of Eu(Ⅲ) from aqueous solution

Batch adsorption experiments were conducted for the adsorption of Eu(Ⅲ) ions from aqueous solution by D113 resin. The results indicated that D113 resin could adsorb Eu(Ⅲ) ion effectively from aqueous solution. The adsorption was strongly dependent on pH of the medium with enhanced adsorption as the pH turned from 3.50 to 7.00 and the optimal adsorption condition was in HAc-NaAc medium with pH value of 6.50. The maximum uptake capacity of Eu(Ⅲ) ions was 290.9 mg/g D113 at 298 K, at an initial pH value of 6.50. The overall adsorption process was best described by Lagergren-first-order kinetics. When Freundlich and Langmuir isotherms were tested, the latter had a better fit with the experimental data. The thermodynamic parameters such as free energy (G) which were all negative, indicated that the adsorption of Eu(Ⅲ) ions onto D113 resin was spontaneous and the positive value of enthalpy (H) showed that the adsorption was endothermic in nature. Thomas model was applied to experimental column data to determine the characteristic parameters of column useful for process design. Furthermore, Eu(Ⅲ) could be eluted by using 3.0 mol/L HCl solution and the D113 resin could be regenerated and reused.     

Phase structure and temperature dependent luminescence properties of Sr2LiSiO4F: Eu2+ and Sr2MgSi2O7: Eu2+ phosphors

Green-emitting Sr2LiSiO4F:Eu2+ and blue-emitting Sr2MgSi2O7:Eu2+ phosphors were synthesized by the conventional high temperature solid-state route,respectively.Their structures and photoluminescenee properties were comparatively investigated.It was found that the mixture phases of Sr2MgSi2O7 and SrF2 were obtained when a part of Sr2+ in Sr2LiSiO4F was replaced by some amount of Mg2+ in order to design the possible SrMgLiSiO4F:Eu2+ phosphor.Based on the photoluminescence analysis,Sr2LiSiO4F:Eu2+ phosphor exhibited a green broad emission band of main peak at 513 nm under the excitation of 365 nm,while the Sr2MgSi2O7:Eu2+ and SrMgLiSiO4F:Eu2+ phosphor showed blue emission centered at 467 nm.The temperature dependent photoluminescence properties and room temperature decay time for the three kinds of phosphors were also discussed in this paper.     

Er3+-substituted W-type barium ferrite: preparation and electromagnetic properties

Er3+-substituted W-type barium ferrites Ba1-xErx(Zn0.3Co0.7)2Fe16O27(x=0.00,0.05,0.10,0.15,0.20)were synthesized by polymer adsorbent combustion method.Samples were characterized by X-ray diffraction analysis(XRD),X-ray fluorescence(XRF),scanning electron microscopy(SEM)and network analyzer to investigate the relationships among Er3+concentration,crystal structure,surface mcrphology and electromagnetic properties.All the XRD patterns showed pure phase of W-type barium ferrite when x≤0.15,while the impurity phase of ErFeO3 appeared when x=0.20.The pure W-type barium ferrite showed a hexagonal flake shape.In addition,the microwave electromagnetic properties of samples were analyzed in the frequency range of 2-18 GHz.It was indicated that the electromagnetic properties were significantly improved when Er3+doping content was 0.10.The reasons were also discussed using electromagnetic theory.The optimized ferrite exhibited excellent microwave absoption performance.The maximum of reflection loss(RL)reached about-27.4 dB and RL was below-10dB at the frequency range from 8.4 GHz to 18 GHz,when the thickness was 2.6 mm.     

EXAFS investigation and luminescent properties of nanosized Tb: Lu2O3 phosphors

Nanosized terbium doped Lu2O3 phosphors were synthesized via a modified co-precipitation processing.The as-prepared Tb:Lu2O3 phosphors was consisted of well crystallized nanosized sphere particles with a diameter of about 30 nnx Local structure of Tb ions in Lu2O3 lattice was investigated by an analytical approach based on Fourier transformation of the extended X-ray absorption fine structure(EXAFS) data.X-ray near edge structure (XANES) spectra suggested that all Tb ions doped were tervalonce.EXAFS results indicated that Tb ions have entered the Lu2O3 cubic lattice by means of solid solution.The coordination number and first shell Tb-O distance dropped with the increasing of Tb concentration.Emission spectra of the phosphors was shown to be typical for Tb3+ with main components at 542,550 and 490 nm,derived from irradiative relaxation of 5D4 level.The emission intensity decreased severely with the increasing of Tb concentration from 1 mol.% to 15 tool.%,suggesting a significant concentration quenching above 1 mol.% Tb.The reduction of emission intensity was interpreted by higher distortion derived relaxation among the surface state resident Tb3+ ions.     

Multi-Pass Simulation of Heavy Plate Rolling Including Intermediate Forced Cooling

Thermomechanical Controlled Processing (TMCP) including accelerated cooling after the final hot rolling pass is a well-established technology,widely applied in HSLA steel plate production.However,there are still certain limitations,especially for thicker plate.The rolling schedule includes a long holding period (HP) after the roughing stage to allow the temperature to fall sufficiently for optimised TMCP during finishing.Intermediate Forced Cooling (IFC) applied during the HP can increase productivity by decreasing the required hold time,can restrict austenite grain growth,and can also improve the subsequent strain penetration in thick plate with further metallurgical benefits.Multi-pass plane strain compression (PSC) tests have been performed on the thermomechanical compression (TMC) machine at Sheffield University including different severities of IFC.Clearly it is impossible to simulate all aspects of the temperature and strain gradients present in thick plates in laboratory specimens,and most of the tests were conducted at temperatures and strains calculated by Finite Element modelling as relevant to specific positions through the plate thickness.However,some aspects of the gradients were addressed with tests using cold platens.The results have indeed shown that IFC can shorten the HP and reduce austenite grain growth and its variation across thick plate.     

Overview of Particles and Bubbles in Continuously Cast Steel

This paper gives an overview of phenomena associated with particles and bubbles in continuously cast steel. During steel processing from deoxidation to solidification the inclusion population undergoes changes with opportunities of removal. Flotation is an important separation mechanism. Inclusion particles may accumulate in the solidifying strand, thus forming enriched bands, which depend on the type of casting machine. Bubbles are created during inert gas injection. They also change in size, can float out, but also form accumulation bands. The interaction of bubbles and particles is discussed. Internal structure that recently has been observed on the inner surface of bubbles will be reviewed.     

烦恼 快乐 艺术——池莉“人生三部曲”解读

池莉的"人生三部曲"--<烦恼人生>、<不谈爱情>、<太阳出世>诉尽了普普通通的市民烦恼,小说中主人公被柴米油盐、吃喝拉撒、老婆孩子等琐事所烦着,从而构成他们的"烦恼人生".然而池莉通过自己的艺术创作,以积极的人生态度,又让读者体会到生活本身的快乐,"烦恼人生"中包含着"快乐人生".     

属性块在工程图形中的研究与应用

介绍了在工程图形中用属性块标注表面粗糙度的方法.采用属性块不仅能避免大量重复性的工作,还能节省大量的存储空间,具有提高绘图速度、质量,便于修改,资源共享等应用价值.     

深云立交桥梁检测及加固改造

根据深云立交桥梁的检测结果，对该桥目前的整体状况、工作状态，及其使用情况做出综合评价，对桥的病害原因进行了分析，并提出合理的加固方案。     

材料科学技术转型发展与钢铁创新基础设施的建设

摘要：在第4次工业革命浪潮的推动下,钢铁科学与技术正在经历数字化、智能化转型。钢铁行业全流程各工序均为“黑箱”,为多场、多相、多变的巨系统,具有复杂相关关系和遗传效应等。这些不确定性带来了巨大的挑战。挑战和机遇并存。这些不确定性提供了智能化和数字化技术的应用场景资源;钢铁行业极为丰富的大数据提供了挖掘其中蕴含客观规律的数据资源;现代的数据科学、智能技术为解决不确定性问题提供了强大的手段。以数据为中心,以工业互联网为载体,以实验工具、数字数据、计算工具为支撑,建设钢铁企业材料创新基础设施,将可以大幅度提高研发效率,降低研发成本,有力地支撑钢铁材料科学与技术的转型发展。实验工具平台除了传统的实验室仪器装备和中试装备之外,实际生产线被作为主要的实验工具。这些实验工具提供丰富、精准、写实的历史数据和现实生产数据,特别是生产线装备提供实际生产大数据,蕴含着生产过程中的全部规律,是极宝贵的数据资源。利用机器学习、深度学习等现代数据挖掘技术为计算工具,对这些数据资源进行处理、分析、计算,将数据转换为高保真度模型,可以得到具有“原位分析能力”的数字孪生。在工业互联网的总体架构下,以数字孪生为核心,组成信息物理系统,构建起基于数据自动流动的状态感知、实时分析、科学决策、精准执行的闭环赋能体系,解决生产制造、应用服务过程中的复杂性和不确定性问题,提高资源配置效率,实现资源优化,对材料行业转型发展提供关键技术支撑。虚实映射、实时交互、精准控制的信息物理系统与材料创新基础设施合二为一,以材料创新基础设施为基盘,形成具有“原位分析能力”的数字孪生,建设钢铁生产全流程、一体化的信息物理系统,必将推进钢铁行业智能制造蓬勃开展和数字化、智能化转型。     

Praise and Blame and Robinson.

Daniel Robinson suggests that much of the civil and criminal law "serves as the institutionalized form of praise and blame". Indeed it does. Pulling at this thread of Robinson's tapestry leads the reader straightaway to a host of truths about how law and morality not only intersect, but work together in harmony. "[L]aw", Robinson says, is a "vivid expression of deeper and impenetrably complex moral theories". This essay explores several of these harmonies, but focuses on two. One is that political society must be seen as the cooperation of free persons according to law, which persons hold common moral understandings. The second has to do with retribution as the moral justifying aim of punishing criminals. The author goes beyond Robinson's limited praise of retribution, and shows that some central features of our practice of punishment are understandable only within the retributive framework. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

《儿子与情人》的语码转换与男女二元对立

劳伦斯小说《儿子与情人》一个鲜明的语言特色就是标准英语和当地方言频繁的语码转换。莫瑞尔用方言来对抗妻子,而妻子坚持用标准英语,偶尔也用方言来讽刺、挖苦丈夫。语码转换反映了劳伦斯男女二元对立的哲学思想。     

Status and solidarity in social comparison: Agentic and communal values and vertical and horizontal directions.

Social comparison involves positioning the self relative to others on a vertical or status dimension (ranging from upward to downward comparisons) and a horizontal or solidarity dimension (ranging from contrastive to connective comparisons). Across 3 studies in which 389 undergraduates recorded everyday social comparisons (n = 4,417), downward and connective comparisons were rated as more helpful and mood enhancing than upward and contrastive comparisons. The effects of horizontal comparisons were greater for people for whom solidarity was an important value; however, the effects of vertical comparisons were not greater for people who valued status. The roles of the comparison target, topic, and situation were also explored; for example, noticing undesirable features of the target enhanced status but undermined solidarity. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Voices of fear and anxiety and sadness and depression: The effects of speech rate and loudness on fear and anxiety and sadness and depression.

Two studies investigated the role of expressive vocal behavior (specifically, speech rate and loudness) in fear and anxiety and in sadness and depression. In the 1st study, participants spoke about personally experienced fear and anxiety-arousing and neutral events using 3 different voice styles: fast and loud, normal, and slow and soft. In the 2nd study, participants spoke about personally experienced sad or depressing and neutral events using the same 3 voice styles. In both studies, the participants' highest levels of subjective affective and cardiovascular (CV) arousal occurred when they spoke about the emotional events in a mood-congruent voice style: fast and loud in the case of fear and anxiety, and slow and soft in the case of sadness or depression. Mood-incongruent voice styles canceled the heightened levels of CV arousal normally associated with these negative emotions. The voice-style manipulation had no significant effect on the participants' levels of CV arousal during the neutral discussions. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

钢铁产品交易与展示平台的设计与应用

为解决单个企业的信息化投资风险、从整体上降低企业信息化投入,针对大邱庄钢铁产业的类型特点,设计了一种新型信息化公共服务平台。详细阐述了钢铁产品展示及交易平台的建设内容及系统开发技术。该平台集产品展示、信息查询、用户管理功能于一体,实现了全自动、全智能的在线管理和维护,适用于中小型企业。该平台的应用最大化地发挥了大邱庄的产业优势,对大邱庄工业园区的宣传和市场开拓起到了一定的作用。     

Aging and negative affect: The rise and fall and rise of anxiety and depression symptoms.

The relationship between aging and negative affect is dynamic and complex. Although prior studies have often cited lower prevalence rates of anxiety and mood disorders among older individuals, these studies may miss the dynamic relationship between symptoms and aging. To evaluate a nonlinear model of the relationship between aging and negative affect, the author examined measures of neuroticism, anxiety, and depression symptoms in a cross-sectional, community sample (N = 335), ages 18 to 93. Results indicated a curvilinear relationship, with mean symptom levels increasing during early adulthood (until the mid-30s) and then showing a small decline until older adulthood (the mid-70s), when symptoms again increase with age. (PsycINFO Database Record (c) 2010 APA, all rights reserved)