0.2-μm gate-length atomic-planar doped pseudomorphic Al0.3Ga0.7As/In0.25Ga0.75As MODFETswith fT over 120 GHz

The authors report the DC and RF performance of nominally 0.2-μm-gate length atomic-planar doped pseudomorphic Al_0.3Ga_0.7As/In_0.25Ga_0.75As modulation-doped field-effect transistors (MODFETs) with f_T over 120 GHz. The devices exhibit a maximum two-dimensional electron gas (2 DEG) sheet density of 2.4×10¹² cm^-2, peak transconductance g _m of 530-570 mS/mm. maximum current density of 500-550 mA/mm, and peak current-gain cutoff frequency f_T of 110-122 GHz. These results are claimed to be among the best ever reported for pseudomorphic AlGaAs/InGaAs MODFETs and are attributed to the high 2 DEG sheet density, rather than an enhanced saturation velocity, in the In_0.25Ga_0.75As channel     

DC and microwave characteristics of InAlAs/InGaAssingle-quantum-well MODFETs with GaAs gate barriers

The design and performance of In_0.53Ga_0.47As/In_0.52Al_0.48 As modulation-doped field-effect transistors (MODFETs) have been optimized by incorporating a single In_0.53Ga_0.47As quantum-well channel and a thin strained GaAs gate barrier layer. These help to lower the output conductance and gate leakage current of the device, respectively. The DC performance of 1-μm-gate devices is characterized by extrinsic transconductances of 320 mS/mm at 300 K and 450 mS/mm at 77 K and a best value of f_T=35 GHz is derived from S-parameter measurements     

Doubly strainedIn0.41Al0.59As/n+-In0.65Ga0.35As HFET with high breakdown voltage

An In_0.41Al_0.59As/n⁺-In_0.65 Ga_0.35As HFET on InP was designed and fabricated, using the following methodology to enhance device breakdown: a quantum-well channel to introduce electron quantization and increase the effective channel bandgap, a strained In_0.41Al_0.59As insulator, and the elimination of parasitic mesa-sidewall gate leakage. The In_0.65Ga_0.35As channel is optimally doped to N_D=6×10¹⁸ cm^-3. The resulting device (L_g=1.9 μm, W_g =200 μm) has f_t=14.9 GHz, f_max in the range of 85 to 101 GHz, MSG=17.6 dB at 12 GHz V_B=12.8 V, and I_D(max)=302 mA/mm. This structure offers the promise of high-voltage applications at high frequencies on InP     

W-band low-noise InAlAs/InGaAs lattice-matched HEMTs

Very low-noise 0.15-μm gate-length W-band In_0.52 Al_0.48As/In_0.53Ga_0.47As/In _0.52Al_0.48As/InP lattice-matched HEMTs are discussed. A maximum extrinsic transconductance of 1300 mS/mm has been measured for the device. At 18 GHz, a noise figure of 0.3 dB with an associated gain of 17.2 dB was measured. The device also exhibited a minimum noise figure of 1.4 dB with 6.6-dB associated gain at 93 GHz. A maximum available gain of 12.6 dB at 95 GHz, corresponding to a maximum frequency of oscillation, f_max, of 405 GHz (-6-dB/octave extrapolation) in the device was measured. These are the best device results yet reported. These results clearly demonstrate the potential of the InP-based HEMTs for low-noise applications, at least up to 100 GHz     

High-performance monolithic pin-MODFET transimpedance photoreceiver

The performance characteristics of a transimpedance photoreceiver using a In_0.53Ga_0.47As p-i-n photodiode integrated with a 0.1-μm-gate-length regrown pseudomorphic In_0.60Ga _0.40As MODFET grown by MBE have been investigated. The regrown MODFETs have extrinsic transconductance values as high as 610 mS/mm and channel currents up to 350 mA/mm at a drain bias of 1.5 V. The measured temporal response of the photoreceiver exhibits a FWHM value of 90 ps, which indicates a bandwidth of ~6 GHz and expected 10-Gb/s operation. The transimpedance gain was as high as 55 dB-Ω with an 800-Ω feedback resistor     

Low-temperature microwave characteristics of pseudomorphic InxGa1-xAs/In0.52Al0.48Asmodulation-doped field-effect transistors

Low-temperature microwave measurements of both lattice-matched and pseudomorphic In_xGa_1-xAs/In_0.48As (x=0.53, 0.60, and 0.70) channel MODFETs on InP substrates were carried out in a cryogenic measurement system. The measurements were done in the temperature range of 77 to 300 K and in the frequency range of 0.5 to 11.0 GHz at different bias conditions. The cutoff frequency ( f_T) for the In_xGa_1-xAs/In_0.52Al_0.48As MODFETs improved from 22 to 29 GHz, 29 to 38 GHz, and 39 to 51 GHz, for x=0.53, 0.60, and 0.70, respectively, as the temperature was lowered from 300 to 77 K, which is approximately a 31% increase at each composition. No degradations were observed in device performance. These results indicate an excellent potential of the pseudomorphic devices at low temperatures     

Gate-length dependence of DC and microwave properties ofsubmicrometer In0.53Ga0.47As HIGFETs

In_0.52Al_0.48As/In_0.53Ga_0.47 As/InP heterostructure insulated-gate field-effect transistors (HIGFETs) with gate lengths from 1.1 and 0.3 μm have been fabricated, and their electrical performance is characterized at DC and microwave frequencies. The refractory-gate self-aligned process, applied to devices with In_0.53Ga_0.47As channels, yields an unprecedented combination of very-high speed and excellent uniformity. HIGFETs with L_g=0.6 μm showed average peak transconductance g_m of 528 mS/mm and unity-current-gain cutoff frequency f_t of 50 GHz. The uniformity of g_m was better than 1%, and the voltage of the g_m peak was uniform to ±30 mV. HIGFETs with L_g=0.3 μm showed f₁ up to 63 GHz, but suffered from serious short-channel effect, due to excessive thickness of the InGaAs channel layer. A self-aligned technique for gate resistance reduction is shown to substantially improve microwave power gain     

Microwave performance of AlInAs-GaInAs HEMTs with 0.2- and0.1-μm gate length

The millimeter-wave performance is reported for Al_0.48In_0.52As-Ga_0.47In_0.53 As high-electron-mobility transistors (HEMTs) with 0.2-μm and 0.1-μm-long gates on material grown by molecular-beam epitaxy on semi-insulating InP substrates. Devices of 50-μm width exhibited extrinsic transconductances of 800 and 1080 mS/mm, respectively. External f_T (maximum frequency of oscillation) of 120 and 135 GHz, respectively, were measured. A maximum f_T of 170 GHz was obtained from a 0.1×200-μm² device. A minimum noise figure of 0.8 dB and associated gain of 8.7 dB were obtained from a single-stage amplifier at frequencies near 63 GHz     

In0.52Al0.48As/In0.53Ga0.47As MSM photodetectors and HEMT's grown by MOCVD on GaAs substrates

The authors report the first demonstration of In_0.52Al _0.48As/In_0.53Ga_0.47As metal-semiconductor-metal (MSM) photodetectors and high-electron-mobility transistors (HEMTs) grown on GaAs substrates by organometallic chemical vapor deposition. Both photodetectors and transistors showed no degradation in performance compared to devices simultaneously grown on InP substrates. The photodetectors exhibited a responsivity of 0.45 A/W and leakage current of 10 to 50 nA. The HEMTs with a gate length of 1.0 μm showed a transconductance as high as 250 mS/mm, and f_T and f_max of 25 and 70 GHz, respectively     

Millimeter-wave ion-implanted gradedInxGa1-xAs MESFETs grown by MOCVD

The authors present the fabrication and characterization of ion-implanted graded In_xGa_1-xAs/GaAs MESFETs. The In_xGa_1-xAs layers are grown on GaAs substrates by MOCVD (metal-organic chemical vapor deposition) with InAs concentration graded from 15% at the substrate to 0% at the surface. 0.5-μm gate MESFETs are fabricated on these wafers using silicon ion implantation. In addition to improved Schottky contact, the graded In_xGa _1-xAs MESFET achieves maximum extrinsic transconductance of 460 mS/mm and a current-gain cutoff frequency f_t of 61 GHz, which is the highest ever reported for a 0.5-μm gate MESFET. In comparison, In_0.1Ga_0.9As MESFETs fabricated with the same processing technique show an f_t of 55 GHz     

Unstrained, modulation-doped, In0.3Ga0.7As/In0.29Al0.71As field-effect transistor grown on GaAssubstrate

The fabrication, structure, and properties of unstrained modulation-doped, 1-μm-long and 10-μm-wide gate, field effect transistors made of In_0.3Ga_0.7As/In_0.29As_0.71As heterojunctions grown on GaAs substrates using compositionally step-graded buffer layers are described. These devices have a transconductance of 335 mS/mm, f_max of 56 GHz, and a gate breakdown voltage of 23.5 V     

DC and microwave performance of a 0.1 μm gate InAs/In0.52Al0.8As MODFET

The authors have measured and analyzed the performance characteristics of 0.1-μm gate InAs/In_0.52Al_0.48 MODFETs grown by molecular beam epitaxy. The transistors are characterized by measured g_m(max)=840 mS/mm, f_T=128 GHz, and a very high current carrying capability, e.g. I_dss=934 mA/mm at V _gs=0.4 V and V_ds=2.7 V. The value of f _T is estimated from extrapolation of the current gain (H ₂₁) at a -6 dB/octave rolloff. This is the first report on the microwave characteristics of an InAs-channel MODFET and establishes the superiority of this heterostructure system     

Integration of InAlGaAs/InGaAs MODFETs on MQW modulators on GaAssubstrates

An In_xAl_yGa_1-x-y device layer structure that enables the monolithic integration of In_0.25Al _0.75As/In_0.15Ga_0.85As MODFETs and In _0.25Al_0.35Ga_0.40As/In_0.25Ga _0.75As MQW modulators is reported. Current gain cutoff frequencies of 10 GHz are measured for 1 μm gate length MODFETs. MQW modulators operating at 1.05 μm demonstrate 20% transmission modulation for an applied 8 V     

High-performance highly strainedGa0.23In0.77As/Al0.48In0.52As MODFET's obtained by selective and shallow etch guide recesstechniques

Record high f_TL_g products of 57 and 46 GHz-μm have been achieved in Ga_1-x In_x As/AlInAs MODFETs with a strain compensated channel of x=0.77 and a lattice-matched channel of x=0.53, respectively. Although g_m as high as 950 mS/mm has been obtained by conventional deep recess for the gate, these latter devices show a prominent kink effect which lowers f_T and the voltage gain. By limiting the depth of final nonselective recess etch to 3 nm with the help of selective step etches, f_T as high as 47 GHz and g_m as high as 843 mS/mm have been achieved for MODFETs with x=0.77 and L_g=1.1 μm     

60-GHz noise performance of ion-implanted InxGa1-xAs MESFET's

The authors report the 60-GHz noise performance of low-noise ion-implanted In_xGa_1-xAs MESFETs with 0.25 μm T-shaped gates and amplifiers using these devices. The device noise figure was 2.8 dB with an associated gain of 5.6 dB at 60 GHz. A hybrid two-state amplifier using these ion-implanted In_xGa_1-x As MESFETs achieved a noise figure of 4.6 dB with an associated gain of 10.1 dB at 60 GHz. When this amplifier was biased at 100% I _dss, it achieved 11.5-dB gain at 60 GHz. These results, achieved using low-cost ion-implantation techniques, are the best reported noise figures for ion-implanted MESFETs     

Characterization of surface-undoped In0.52Al0.48As/In0.53Ga0.47As/InP high electron mobilitytransistors

High-performance 0.3-μm-gate-length surface-undoped In_0.52 Al_0.48As/In_0.53Ga_0.47As/InP high-electron-mobility transistors (HEMTs) grown by molecular beam epitaxy (MBE) have been characterized and compared with a surface-doped structure. At 18 GHz, the surface-undoped HEMT has achieved a maximum stable gain (MSG) of 19.2 dB compared to 16.0 dB for the surface-doped structure. The higher MSG value of the surface-undoped HEMTs is obtained due to the improved g_m/g₀ ratio associated with the surface-induced electric field spreading effect. Comparison of identical 0.3-×150-μm-gate devices fabricated on surface-undoped and -doped structures has shown greatly improved gate leakage characteristics and much lower output conductance for the surface-undoped structure. It is demonstrated that the surface potential, modulated by different surface layer designs, affects the charge control in the conducting channel, especially the carrier injection into the buffer, resulting in excess output conductance. Several millimeter-wave coplanar waveguide (CPW) monolithic distributed amplifiers have been successfully fabricated by using the surface-undoped HEMT structure. A high gain per stage distributed amplifier with 170-dB±1-dB small-signal gain across a frequency band of 24-40 GHz, a W-band monolithic integrated circuit with 6.4-dB gain at 94 GHz, and a broad bandwidth distributed amplifier with 5-dB gain across a frequency band of 5 to 100 GHz have been demonstrated by using the surface-undoped structures     

In0.52Al0.48As/InxGa1-xAs (0.53⩽x⩽0.70) lattice-matched and strainedheterostructure insulated-gate FETs

The DC and microwave properties of In_0.52Al_0.48 Al/In_xGa_1-xAs (0.53⩽x⩽0.70) heterostructure insulated gate field-effect transistors (HIGFETs) with a quantum well channel design are presented. DC and microwave transconductances (g_m) are enhanced as the In content is increased in the InGaAs channel. An intrinsic microwave g _m value of 428 mS/mm and a K-factor of 1140 mS/mm-V have been obtained for 1.0-μm gate length with the 65% In channel devices. The sheet charge density, drift mobility, transconductance, current-gain cutoff frequency (f_T), and maximum oscillation frequency (f _max) all show a continuous improvement up to 65% In content ( f_T=22.5 GHz with 53% and f_T=27 GHz with 65% In; the corresponding f_max change is from 6.5 to 8 GHz). The device performance degrades as the In content is increased to 70%. DC and microwave characteristics show the presence of negative differential resistance (NDR) up to 2.7 GHz     

A pseudomorphic AlGaAs/n+-InGaAs metal-insulator-dopedchannel FET for broad-band, large-signal applications

Molecular beam epitaxy (MBE)-grown L_g=1.7-μm pseudomorphic Al_0.38Ga_0.62As/n⁺-In_0.15Ga _0.85As metal-insulator-doped channel FETs (MIDFETs) are presented that display extremely broad plateaus in both f_T and f_max versus V_GS, with f_T sustaining 90% of its peak over a gate swing of 2.6 V. Drain current is highly linear with V_GS over this swing, reaching 514 mA/mm. No frequency dispersion in g _m up to 3 GHz was found, indicating the absence of electrically active traps in the undoped AlGaAs pseudoinsulator layer. These properties combine to make the pseudomorphic MIDFET highly suited to linear, large-signal, broadband applications     

Improved strained HEMT characteristics using double-heterojunctionIn0.65Ga0.35As/In0.52Al0.48As design

The DC and microwave properties of strained In_0.65Ga _0.35As/In₀₅₂Al_0.48As HEMTs (high electron-mobility transistors) with double-heterojunction design are presented. The high sheet carrier density and good carrier confinement give rise to excellent device performance with very low output conductance. For 1×150-μm² long-gate HEMTs, the measured cutoff frequency f_T and maximum frequency of oscillation f_max are as high as 37 and 66 GHz, respectively     

Highly lattice-mismatched In0.26Ga0.74As/GaAsMESFET's: impact of critical thickness on device performance

Fabrication of 0.25-μm-gate MESFETs directly on In_0.26 Ga_0.74As epitaxial layers which are much thicker than the pseudomorphic critical thickness is described. The InAs mole fraction is increased in the MESFET channel to 26%. Whether the device performance can be further improved without detrimental dislocation effects as the channel thickness exceeds the critical thickness considerably is investigated. Despite large lattice mismatch and high defect density, these devices show excellent microwave performance with an extrinsic f_t of 120 GHz. Bias-dependent S-parameters indicate that the In_0.26Ga_0.74As MESFET maintains excellent device performance down to very low drain current without showing any performance degradation due to misfit or threading dislocations