New Intermediates and Dyes for Synthetic–polymer Fibres 4–(4–Methoxyanilino)–3–nitro–l, 8–naphthalimides

The synthesis of a series of 4–(4–methoxyanilinoj–3–nitro–1, 8–naphthalimides by condensation of amines with 4–(4–methoxyanilino)–3–nitronaphthalene–l, 8–dicarboxylic anhydride, and also by condensation of 4–halogeno–3–nitro–1, 8–naphthalimides with 4–methoxyaniline is described. They dye synthetic–polymer fibres, particularly polyesters, deep orange of excellent fastness properties. In presence of strong bases, e. g. 3–aminopropan–l–ol, the 4–arylamino group is replaced, giving a series of yellow dyes. A method is described for preparing the dyes without isolation of intermediate stages.     

Substituent Effects on the Colour,Dyeing and Fastness Properties of Trisubstituted 4–N–β–Hydroxyethyl–N–β–Cyanoethylaminoazobenzenes

School of Chemistry and Chemical Technology University of Bradford Bradford West Yorkshire BD7 1DP The synthesis of a series of 2′, 4′, 6′-trisubstituted derivatives of 4–N–β–hydroxyethyl–4– N–β–cyanoeth ylaminoazobenzene is reported, and the effect of the nature of the substituents on the colour, dyeing and fastness properties of these dyes is described. The dyes coloured synthetic–polymer fibres well, with the exception of those containing a methylsulphonyl group, which gave weaker dyeings on polyester. Dyes substituted by 2′-nitro groups tended to have poor light fastness, and reasons for the variations in the light fastness of monoazo dyes of this type are discussed.     

Properties of Monoazo Disperse Dyes,Derivatives of 3– and 4–Aminophthalimide

The synthesis of several disperse dyes, from 3–amino–12–phthalimide and its N–methyl derivative as diazo component and N, N–dialky lanilines as coupling component is described. The dyeing behaviour and some physical properties of these dyes are investigated and compared with those of isomeric dyes containing azo groups in the 4–position, previously studied [5]. These properties were found to be considerably affected by the presence of an alkyl sub–stituent on the nitrogen atom of imide group. Further, dyes containing unsubstituted –NH groups showed somewhat better thermal properties (higher melting points and dyeings of better fastness to sublimation), but at the same time their dyeability was worse for all the known processes of dyeing polyester fibres. Based on the i. r. and visible spectra of the dyes under investigation, it was concluded that the dyes containing unsubstituted –NH groups are highly associated; dyes containing azo groups in the 4–position associate to give one product, whereas association of the dyes with azo groups in the 3–position leads to two different products.     

Benzo[k,l], xanthene–3, 4–dicarboximides and benzimidazoxanthenoisoquinolinones – yellow and orange dyes for synthetic–polymer fibres

Condensation of 4–chloro–l, 8–naphthalic anhydride with 2–nitrophenol afforded 4–(2–nitrophenoxy)–l, 8–naphthalic anhydride, which on reduction followed by Pschorr intramolecular cyclisation gave benzo[k, l]xanthene–3, 4–dicarboxylic acid anhydride. The identity of the product was confirmed by its alternative synthesis from 5–amino–4–phenoxy–l, 8–naphthalic anhydride. Benzo[k, l]xanthene–3, 4–dicarbox–ylic acid anhydride condensed with alkylamines or arylamines and with o–phenylenediamines to yield the corresponding imides and imidazole derivatives, which coloured polyester in fluorescent greenish–yellow to orange hues, respectively, of good fastness to light and sublimation. The colour of the dyes is discussed with respect to analogous ring–closed sulphur– containing heterocycles.     

Synthesis and characterisation of microencapsulated 7‐alkyloxy‐4‐trifluoromethylcoumarin dyes

Five new 7‐alkyloxy‐4‐trifluoromethylcoumarin fluorescent dyes were synthesised using the Pechmann and Williamson etherification reactions. The structures of these coumarin dyes were characterised by Fourier Transform–infrared, proton and carbon nuclear magnetic resonance and mass spectra. One of the new coumarin compounds, 7‐isopropyloxy‐4‐trifluoromethylcoumarin, was microencapsulated with melamine–formaldehyde as the shell material by in situ polymerisation. The microcapsules were characterised in terms of Fourier Transform–infrared spectrum, particle size distribution and scanning electron microscopy morphology. The cotton fabric finished with the microencapsulated coumarin dye showed strong fluorescence under ultraviolet light.     

A Proton–magnetic–resonance Spectroscopic Investigation of Intramolecular Hydrogen Bonding in 4–Substituted–2–nitrodiphenylamine Disperse Dyes

Detection of long–range coupling constants, JNH, H5, in 100–MHz proton–magnetic–resonance spectra confirms the presence of intramolecular NH ON hydrogen bonding in some 2–nitrodiphenylamine disperse dyes. Measurements in polar and non–polar solvents on 2–nitrodiphenylamine and on twelve 4–substituted derivatives indicate weakening of the bonding, which is related to light fastness, when the 4–substituent is a strong electron acceptor.     

A green process for recovery of H2SO4 and Fe2O3 from FeSO4·7H2O by modeling phase equilibrium of the Fe(П)– –H+–Cl– system

Ferrous sulfate heptahydrate FeSO₄·7H₂O is a major waste produced in titanium dioxide industry by the sulfate process and has caused heavy environmental problem. A new green process for the treatment of FeSO₄·7H₂O was proposed to make use of iron source and recycle sulfate source as H₂SO₄. It was found that by adding concentrated HCl to the FeSO₄ solution, FeCl₂·4H₂O was crystallized out, which was subsequently calcined to produce Fe₂O₃ and HCl. Concentrated H₂SO₄ solution (about 65 wt %) was obtained by evaporating the FeCl₂·4H₂O‐saturated filtrate. To facilitate the process development and design, the solubilities of FeCl₂·4H₂O in HCl, H₂SO₄, and HCl + H₂SO₄ solutions were measured and the experimental data were regressed with both the mixed‐solvent electrolyte model and the electrolyte NRTL model. On the basis of the prediction of the optimum conditions for the crystallization of FeCl₂·4H₂O, material balance of the new process was calculated. FeCl₂·4H₂O and Fe₂O₃ were obtained from a laboratory‐scale test with about 70% recovery of ferrous source for a single cycle, indicating the feasibility of the process. © 2017 American Institute of Chemical Engineers AIChE J, 63: 4549–4563, 2017     

Fading of Phenylazo–β–naphthol Dyes on Polypropylene*

The fading of a series of phenylazo–β–naphthol dyes on polypropylene by exposure to either long– or short–wavelength ultraviolet radiation and under nitrogen and oxygen atmospheres, respectively, is reported. The half–lives and relative rates of fading of the dyes were calculated at the wavelength of maximum absorption of the hydrazone band and the hydrazone–azo ratios of the dyes were determined on polypropylene and in ethanol. The relative rates of fading were plotted against the appropriate Hammett constants for the substituents. In general, a linear relation was observed. The graphs had positive slopes, but negative slopes were also obtained with the dyes bearing electropositive groups. Graphs of relative rates of fading against hydrazone?azo ratio were also drawn. The results were generally similar to those obtained with the plots of Hammett constants, but correlation was better. The results indicate that, on polypropylene, the most important fading mechanism for the hydrazone form of the dye is reductive, although there is evidence that oxidation may occur, especially in the presence of oxygen.     

The Dyeing Properties of Monoazo Reactive Disperse Dyes Derived from –Chloro–4–aminoacetophonone on Polyester Fibre Blends

The preparation of monoazo reactive disperse dyes from –chloro–4–aminoacetophenone and the dyeing properties of these dyes on polyester–cotton and polyester–wool blends are reported.     

Synthesis and spectroscopic investigation of cationic donor‐(π‐bridge)‐acceptor dye, 4‐[N‐(5,6,7,8‐tetrahydroisoquinolinium‐5‐ylidene)methyl]‐N,N‐dialkylaniline iodide

The synthesis and fundamental spectroscopic properties of eight hemicyanine (HC) dyes are presented. The dyes were prepared by the condensation of N‐methyl‐5,6,7,8‐tetrahydroisoquinolinium iodide with p‐(N,N‐dialkylamino)benzaldehydes. The compounds were characterised by nuclear magnetic resonance spectroscopy and their purity was checked with the use of thin‐layer chromatography. The spectroscopic properties of the dyes were determined in three organic solvents. The electronic absorption spectra of the dyes demonstrate moderate sensitivity to the nature of the substituent present in the aromatic ring and low solvent polarity dependence. In contrast to this, the positions of fluorescence bands are affected by the structure of an electron donor and solvent polarity. The 4‐[N‐(5,6,7,8‐tetrahydroisoquinolinium‐5‐ylidene)methyl]‐N,N‐dialkylaniline iodides were applied as fluorescent probes for the monitoring of the progress of free radical polymerisation. The study on the changes in the fluorescence intensity and spectroscopic shifts of the dyes was carried out during thermally initiated polymeriszation of methyl methacrylate. The purpose of these studies was to find a relationship between the changes in the shape and intensity of probe fluorescence and the degree of monomer conversion into polymer.     

New Intermediates and Dyes for Synthetic–polymer Fibres

Condensation of benzo(k, l)thioxanthene–3, 4–dicarboxylic anhydride with o–phenylenediamines affords isomeric derivatives of the new heterocycles benzimiaazo(1, 2, b)–thioxantheno(2, 1, 9–d, e, f)iso–quinolin– 7–one and benzimidazo–(2, I–a)thioxantheno(2, 1, 9–d, e, f,) isoquinolin–8–one. They are excellent new dyes for polyester fibres, giving fluorescent orange to red dyeings of outstanding fastness to light and sublimation.     

The reactions of 2‐(4‐morpholinothio)‐ and 2‐(4‐morpholinodithio) benzothiazole in the absence of polyisoprene

2‐(4‐morpholinothio)benzothiazole (MOR) and 2‐(4‐morpholinodithio)benzothiazole (MDB) were heated with sulfur and ZnO in a DSC. The products formed at various temperatures were identified and analyzed by HPLC. At temperatures below 200°C, decomposition of the accelerator in the absence of other curatives was slow, degradation products being mainly 2‐bisbenzothiazole‐2,2′‐disulfide (MBTS) and 2‐mercaptobenzothiazole (MBT). A rapid exothermic decomposition above 200°C resulted in the formation of MBT (or its amine salt) and 2‐(4‐morpholino)benzothiazole (MB). MOR and MDB reacted with sulfur to form higher polysulfides. MDB was shown to react more readily with sulfur than MOR and the delayed action of MOR in rubber can therefore not be ascribed to a stable polysulfide as suggested by other authors. Neither MOR nor MDB was found to react with ZnO. A limited reaction between MBT and ZnO was observed. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1235–1240, 1999     

r-5-(α-Halogenbenzyl)-3, t-4-diaryl-c-4-hydroxy-oxazolidin-2-one als Ringtautomere von α-(Arylaminocarbonyloxy)-β-halogen-dihydrochalkonen

r-5-(α-Halogenobenzyl)-3, t-4-diaryl-c-4-hydroxy-oxazolidin-2-ones as Ring Tautomers of α-(N-Arylaminocarbonyloxy)-β-halogeno-dihydrochalcones The reaction of chalcone halogenohydrins ( 1–3 ) with arylisocyanates does not stop at the stage of the α-arylaminocarbonyloxy-β-halogeno-dihydrochalcones ( 7 ), but the cyclic urethanes 4–6 are formed. Compound 7h was synthesized independently. The structure and stereochemistry of 4–6 and 7h were determined by ¹³C n.m.r. spectroscopy.     

Compositional effects on the crosslink density of Ca–(Mg)–(Y)–Si–Al–oxyfluoronitride glasses

The effects of fluorine and nitrogen substitution for oxygen in aluminosilicate glasses, effectively oxyfluoronitride (OFN) glasses, modified by calcium, calcium–yttrium or calcium–magnesium on thermal and physical/mechanical properties have been compared. Thus, 42 glasses in the Ca–(Mg)–(Y)–Si–Al–O–(N)–(F) system have been prepared and characterized with respect to density (ρ), molar volume (MV), compactness (C), free volume (FV), glass transition temperatures measured by DTA (T_g,DTA) and dilatometry (T_g,dil), dilatometric softening point (T_DS), microhardness (μHv) and Young's modulus (E). Gradients of property variation with nitrogen or fluorine substitutions for oxygen are similar for all three different oxyfluoronitride glass systems and are comparable with those reported for other OFN glasses, again indicating independent and additive effects of nitrogen and fluorine. In attempting to further understand how fluorine affects the cross‐link density (CLD) in OFN glasses, it becomes apparent that it is necessary to allow for a greater contribution by aluminum in a modifier role as fluorine content is increased. This modified calculation of CLD values results in good linear fits between T_g and CLD values. This analysis clearly demonstrates and endorses the concepts that thermal properties are related to CLD while physical/mechanical properties are dependent on glass compactness.     

Fibre–reactive Basic Dyes I–Polymethine Dyes Containing the N–Chloroacetyl Group

Several fibre–reactive basic (polymethine) dyes containing the N–chloroacetyl group have been prepared. They had better washing fastness on wool than their non–reactive analogues. Exhaustion figures were obtained in the usual way (colorimetrically) for all the dyes in Table 1 at the following pH: 2. 5, 3. 6, 4. 7, 5. 8, 6. 9 and 8. 4. However, these results were not in accord with visual assessments of the depths and it appears likely that some decomposition of the dyes takes place, in the presence of wool, particularly at higher pH values.     

Structural,spectroscopic and computational study of 5‐(substituted phenylazo)‐3‐cyano‐1‐ethyl‐6‐hydroxy‐4‐methyl‐2‐pyridones

Ten 5‐(substituted phenylazo)‐3‐cyano‐1‐ethyl‐6‐hydroxy‐4‐methyl‐2‐pyridones were studied (five new compounds) to provide insight into the electronic effects of diverse substituents located at different positions in their phenyl moieties. The structural features of these dyes were examined by combining experimental and theoretical approaches. The crystal structures of two derivatives were revealed by X‐ray crystallography and diverse packing modes owing to different intermolecular interactions (π–π stacking and lone pair–π interactions, as well as hydrogen bonds) were found. A study on lattice energy and energy related to the molecular pairs obtained from their crystal packing was performed. The tautomerism and ionisation of the dyes in ethanol or N,N ‐dimethylformamide solution were rationalised in terms of diazo component substitution pattern.     

A facile synthesis and tautomeric structure of novel 4‐arylhydrazono‐3‐(2‐hydroxyphenyl)‐2‐pyrazolin‐5‐ones and their application as disperse dyes

The main target of this paper was the synthesis of novel azo disperse dyes with better dyeing properties, together with a systematic investigation to determine their dominant tautomer(s) from 12 possible tautomeric structures. In this regard, novel azopyrazolin‐5‐one dyes were synthesised via the reaction of hydrazine hydrate with 2,3,4‐chromantrione‐3‐arylhydrazones. The acid dissociation constants both in the ground and in the excited state for the series prepared were determined and correlated by the Hammett equation. The results of this correlation, together with spectral data, indicated that the compounds under scrutiny exist predominantly in the keto‐hydrazo structure as a Z‐configuration, both in the ground and in the excited state. Finally, the synthesised dyes were applied as disperse dyes for dyeing polyester fabrics, and their fastness properties were evaluated. Also, the position of colour in CIELAB coordinates was estimated and discussed.     

New Intermediates and Dyes for Synthetic-polymer Fibres Derivatives of 2-Chloro-4-nitro-4‘-(N-β-hydroxyethyl-N- β-cyanoethylamino)azobenzene

Condensation of 2-chloro-4-nitro-4^t-(N-(β-hydroxyethyl-N-β-cy anoethylamino)azobenzene with various acid chlorides, chloroformates, isocyanates, isothiocyanates and reactive halogeno compounds gives dyes of excellent fastness to light and sublimation on polyester fibres.     

Organosoluble and light‐colored fluorinated polyimides based on 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]propane and aromatic dianhydrides

A novel fluorinated diamine monomer, 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]propane (2), was prepared through the nucleophilic substitution reaction of 2‐chloro‐5‐nitrobenzotrifluoride with 2,2‐bis(4‐hydroxyphenyl)propane in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. Polyimides were synthesized from diamine 2 and various aromatic dianhydrides 3a–f via thermal imidization. These polymers had inherent viscosities ranging from 0.73 to 1.29 dL/g. Polyimides 5a–f were soluble in amide polar solvents and even in less polar solvents. These films had tensile strengths of 87–100 MPa, elongations to break of 8–29%, and initial moduli of 1.7–2.2 GPa. The glass transition temperatures (T_g) of 5a–f were in the range of 222–271°C, and the 10% weight loss temperatures (T₁₀) of them were all above 493°C. Compared with polyimides 6 series based on 2,2‐bis[4‐(4‐aminophenoxy)phenyl]propane (BAPP) and polyimides 7 based on 2,2‐Bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane (6FBAPP), the 5 series showed better solubility and lower color intensity, dielectric constant, and lower moisture absorption. Their films had cutoff wavelengths between 363 and 404 nm, b* values ranging from 8 to 62, dielectric constants of 2.68–3.16 (1 MHz), and moisture absorptions in the range of 0.04–0.35 wt %. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 922–935, 2005     

Synthesis of novel azo‐containing polyureas derived from 4‐[4′‐(2‐hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione

4‐[4′‐(2‐Hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione ( HNAPTD ) ( 1 ) has been reacted with excess amount of n‐propylisocyanate in DMF (N,N‐dimethylformamide) solution at room temperature. The reaction proceeded with high yield, and involved reaction of both N? H of the urazole group. The resulting bis‐urea derivative 2 was characterized by IR, ¹H‐NMR, elemental analysis, UV‐Vis spectra, and it was finally used as a model compound for the polymerization reaction. Solution polycondensation reactions of monomer 1 with Hexamethylene diisocyanate ( HMDI ) and isophorone diisocyanate ( IPDI ) were performed in DMF in the presence of pyridine as a catalyst and lead to the formation of novel aliphatic azo‐containing polyurea dyes, which are soluble in polar solvents. The polymerization reaction with tolylene‐2,4‐diisocyanate ( TDI ) gave novel aromatic polyurea dye, which is insoluble in most organic solvents. These novel polyureas have inherent viscosities in a range of 0.15–0.22 g dL^?1 in DMF at 25°C. Some structural characterization and physical properties of these novel polymers are reported. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3177–3183, 2001