Fiber orientation in injection molding with rotating flow

The development of fiber orientation in injection molding was manipulated by a special molding tool, the RCEM mold, which imposes a rotation action by one of the cavity surfaces during the filling stage. Center‐gated disc moldings were produced from glass fiber reinforced polypropylene with different cavity rotation velocities, inducing distinct distributions and levels of fiber orientation. The morphologies of the moldings were characterized by optical and electronic microscopy. The through‐thickness profiles of fiber orientation were assessed by means of the orientation tensor, and the relationship between the processing thermo‐mechanical environment and the fiber orientation was established. At high rotation velocities, the resulting fiber orientation pattern is mainly controlled by the rotational motion, inducing a much more homogeneous through‐the‐thickness fiber orientation distribution, with a preferential alignment on the circumferential direction. POLYM. ENG. SCI., 2008. © 2007 Society of Plastics Engineers     

纤维增强复合材料的力学性能预测的数值模拟

纤维增强复合材料的力学性能和热物理性能依赖于纤维的取向状态.在注射成型过程中纤维最终的取向状态依赖于充填过程的速度场,因此最终的产品性质依赖于成型的详细过程.研究发现,注塑成型制品的结构呈层状分布,层数依赖于模具几何和成型条件,不过大多数的结构在成型表面为沿流动方向取向,而在中心层为横向排列,有时在制件表面还有一层薄的介于二者之间排列的取向层.本文主要给出两个简单模型中纤维取向预测的理论和数值方法,这两个模型分别为:中心浇口圆盘和边浇口长条.     

Facilitating transcrystallization of polypropylene/glass fiber composites by imposed shear during injection molding

The transcrystal plays an important role in the enhancement of mechanical and thermal performances for polymer/glass fiber composites. Shear has been found to be a very effective way for the formation of transcrystal. Our purpose of this study was to explore the possibility to obtain the transcrystal in real processing such as injection molding. We will report our recent efforts on exploring the development of microstructure of polypropylene (PP)/glass fiber composite from skin to core in the injection-molded bars obtained by so-called dynamic packing injection molding which imposed oscillatory shear on the melt during solidification stage. A clear-cut shear-facilitated transcrystallization of PP on glass fibers was observed in the injection-molding bar for the first time. We suggested that shear could facilitate the transcrystalline growth through significantly improving the fiber orientation and the interfacial adhesion between fiber and matrix.     

Injection molding of glass fiber reinforced phenolic composites. 2: Study of the injection molding process

This study of injection molding of glass fiber reinforced phenolic molding compounds examines fiber breakage and fiber orientation with key material and processing variables, such as injection speed, fiber volume fraction, and the extent of resin pre-cure. The fiber orientation, forming discrete skin-core arrangements, is related to the divergent gate to mold geometrical transition, the extent of pre-cure and injection speed functions of the melt viscosity. Transient modifications to the melt viscosity during mold filling produce variations in skin/core structure along the flow path, which are correlated to the mechanical properties of injection moldings. The melting characteristics of the phenolic resin during plasticization impose a severe environment of mechanical attrition on the glass fibers, which is sequentially monitored along the screw, and during subsequent flow through runners and gates of various sizes. Differences found between the processing characteristics of thermosets and thermoplastics raise questions concerning the applicability of thermoplastic injection molding concepts for thermosets.     

Investigation of fiber orientation states in injection‐compression molded short‐fiber‐reinforced thermoplastics

Injection‐compression molding (ICM) has received increased attention because of its advantages over conventional injection molding (CIM). This article aims to investigate the effects of five dominating ICM processing parameters on fiber orientation in short‐fiber‐reinforced polypropylene (SFR‐PP) parts. A five‐layer structure of fiber orientation is found across the thickness under most conditions in ICM parts. This is quite different from the fiber orientation patterns in CIM parts. The fibers orient orderly along the flow direction in the shell region, whereas most fibers arrange randomly in the skin and the core regions. Additionally, the fiber orientation changes in the width direction, with most fibers arranging orderly along the flow direction at positions near the mold cavity wall. The results also show that the compression force, compression distance, and compression speed play important roles in determining the fiber states. Thicker shell regions, in which most fibers orient remarkably along the flow direction, can be obtained under larger compression force or compression speed. Moreover, the delay time has an obvious effect on the fiber orientation at positions far from the gate. However, the effect of compression time is found to be negligible. POLYM. COMPOS., 31:1899–1908, 2010. © 2010 Society of Plastics Engineers.     

Formation mechanism of high-pressure water penetration induced fiber orientation in overflow water-assisted injection molded short glass fiber-reinforced polypropylene

Recently, there has been growing interest in water-assisted injection molding (WAIM) not only for its advantages over gas-assisted molding (GAIM) and conventional injection molding (CIM), but also for its great potential advantages in industrial applications. To understand the formation mechanism of water penetration induced fiber orientation in overflow water-assisted injection molding (OWAIM) parts of short glass fiber-reinforced polypropylene (SGF/PP), in this work, the external fields and water penetration process within the mold cavity were investigated by experiments and numerical simulations. The results showed that the difference of fiber orientation distribution in thickness direction between WAIM moldings and CIM moldings was mainly ascribed to the great external fields generated by water penetration. Besides, fiber orientation depended on the position both across the part thickness and along the flow direction. Especially in the radial direction, fiber orientation varied considerably. The results also showed that the melt temperature is the principal parameter affecting the fiber orientation along the flow direction, and a higher melt temperature significantly facilitated more fibers to be oriented along the flow direction, which is quite different from the results as previously reported in short-shot water-assisted injection molding (SSWAIM). A higher water pressure, shorter water injection delay time, and higher melt temperature significantly induced more fibers to be orderly oriented in OWAIM moldings, which may improve their mechanical performances and broaden their application scope.     

Measurement and numerical prediction of fiber‐reinforced thermoplastics' thermal conductivity in injection molded parts

Recent improvements in injection molding numerical simulation software have led to the possibility of computing fiber orientation in fiber reinforced materials during and at the end of the injection molding process. However, mechanical, thermal, and electrical properties of fiber reinforced materials are still largely measured experimentally. While theoretical models that consider fiber orientation for the prediction of those properties exist, estimating them numerically has not yet been practical. In the present study, two different models are used to estimate the thermal conductivity of fiber reinforced thermoplastics (FRT) using fiber orientation obtained by injection molding numerical simulation software. Experimental data were obtained by measuring fiber orientation in injection molded samples' micrographs by image processing methods. The results were then compared with the numerically obtained prediction and good agreement between numerical and experimental fiber orientation was found. Thermal conductivity for the same samples was computed by applying two different FRT thermal conductivity models using numerically obtained fiber orientation. In the case of thermal conductivity, predicted results were consistent with experimental data measurements, showing the validity of the models. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39811.     

Injectin molding of short fiber reinforced thermoplastics in a center‐gated mold

We have studied injection molding of a rectangular box using short fiber reinforced polypropylene. The fiber orientation distribution and the local stiffness properties in radial and transverse directions have been measured in the bottom plane. The deduced orientation tensors are compared with predictions of a commercial computer code. Discrepancies are related to approximations made in the calculations and effects not accounted for by the present modeling approach. In the calculations the fiber interaction coefficient was varied seeking to fit experiments. We comment on the out‐of‐plane components of the orientation tensor, the relative thickness of skin and core layers, and the radial dependence of the fiber orientation in each layer. Values of the components of the 4^th‐order orientation tensor calculated from the measured orientation distribution are used to compare different closure approximations referred in the literature. Anisotropy in the stiffness properties, calculated form the measured fiber orientation, agree well with measurements.     

短纤维—热塑性聚氨酯弹性体注射充模过程的研究进展

介绍了短纤维－热塑性聚氨酯弹性体（ＳＦ－ＴＰＵ）注射充模过程国内外的研究进展,ＳＦ－ＴＰＵ注射充模过程与通常高聚物有许多相似之处,更有其不同特点。国内外的研究者们对其注射充填过程中的传热、流动、纤维取向与加工条件、模腔几何参数之间的关系进行了研究,但纤维与流体的相互作用、前锋流对纤维取向的影响等,还须进一步研究。     

Extrusion blow molding of long fiber reinforced polyolefins

A 58% (by weight) long glass fiber reinforced (LGF)‐HDPE master batch was blended with a typical blow molding HDPE grade. HDPE composites having between 5% and 20% (by weight) long fiber content were extruded at different processing conditions (extrusion speed, die gap, hang time). The parison swell (diameter and thickness) decreased with increasing fiber content. Although the HDPE exhibited significant shear rate dependence, the LGF/HDPE composites were shear rate insensitive. Both the diameter and weight swell results also indicated very different sagging behavior. The LGF/HDPE parisons did sag as a solid‐body (equal speed at different axial locations) governed by the orientation caused by the flow in the die. Samples taken from blown bottles showed that fiber lengths decreased to 1‐3 mm, from the original 11 mm fiber length fed to the extruder. No significant difference in fiber length distribution was found when samples for different regions of the bottle were analyzed. SEM micrographs corroborate the absence of fiber segregation and clustering or the occurrence of fiber bundles (homogeneous spatial fiber distribution) as well as a preferential fiber orientation with the direction of flow. The blowing step did not change the orientation of the fibers. Five‐percent (5%) and 10% LGF/HDPE composites could be blown with very slight variations to the neat HDPE inflation conditions. However, 20% LGF/HDPE composites could not be consistently inflated. Problems related to blowouts and incomplete weldlines were the major source of problems.     

Mechanical properties of glass fiber reinforced polypropylene injection molded with a rotation mold

A special mold (Rotation, Compression, and Expansion Mold) was used to impose a controlled shear action during injection molding of short glass fiber reinforced polypropylene discs. This was achieved by superimposing an external rotation to the pressure‐driven advancing flow front during the mold filling stage. Central gated discs were molded with different cavity rotation velocities, inducing distinct levels of fiber orientation through the thickness. The mechanical behavior of the moldings was assessed, in tensile and flexural modes on specimens cut at different locations along the flow path. Complete discs were also tested in four‐point flexural and in impact tests. The respective results are analyzed and discussed in terms of relationships between the developed fiber orientation level and the mechanical properties. The experimental results confirm that mechanical properties of the moldings depend strongly on fiber orientation and can thus be tailored by the imposed rotation during molding. POLYM. ENG. SCI. 46:1598–1607, 2006. © 2006 Society of Plastics Engineers.     

Prediction of fiber orientation in a rotating compressing and expanding mold

In the rotating/compressing/expanding mold (RCEM), one mold wall can expand, compress, and rotate during injection molding, thus offering opportunities to control the thermomechanical history of a polymer and its microstructure. A computer simulation of flow and fiber orientation in RCEM was developed. The predictive model extends the generalized Hele‐Shaw formulation to account for compression/expansion and rotation of the mold wall, and uses the Folgar–Tucker model for fiber orientation predictions. A 20% GF polypropylene was molded under various molding conditions. The predicted fiber orientation distributions were compared with experiments. The model compares favorably with experiments, provided that the fiber orientation equation is modified by a strain‐reduction factor that slows the transient development of fiber alignment. The effect of fountain flow on orientation must also be included to correctly predict fiber orientation near the mold walls, mainly for the case of stationary and linear motions of the mold surface. Compression or expansion of the mold has only a small effect on fiber orientation, but rotation of the mold dramatically changes the orientation, causing fibers to align in the tangential direction across the entire thickness of the molding. This rotation action perturbs the fountain flow and becomes the dominant factor affecting fiber alignment across the entire cavity thickness. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers.     

成型工艺对短玻璃纤维增强聚丙烯注塑管件的壁厚分布及玻璃纤维取向的影响

以气体辅助注射成型(GAIM)、水辅助注射成型(WAIM)、气体驱动弹头辅助注射成型(G-PAIM)及水驱动弹头辅助注射成型(W-PAIM)制备了一系列短玻璃纤维增强聚丙烯弯形管件,对比了各成型工艺对其管件壁厚及玻璃纤维取向分布的影响.结果表明,以管件总体壁厚大小排序为GAIM>WAIM>W-PAIM>G-PAIM,其...     

Compressibility and relaxation of fiber reinforcements during composite processing

In many reinforced composite manufacturing processes it is necessary to compact the fiber materials to obtain the desired fiber/resin ratio in the finished part. Detailed knowledge of applied surface force versus material fiber volume is particularly important in processes such as pultrusion, resin transfer molding, and compression molding. The force required to compact a stack of reinforcing material is strongly dependent on the type of fiber used and its material form. Complicated interactions are possible, particularly when mixtures of unidirectional, oriented cloth and random fiber mats are used. This paper will present results of an experimental and analytical investigation of the response of various dry reinforcing materials subjected to compressive forces applied normal to their principle plane. Experiments were conducted by applying up to 8.6 MPa normal force to thick stacks of E-glass, graphite cloth, mat and unidirectional material and combinations of two different fiber orientation. Pressure versus fiber volume data were generated for both individual materials and various combinations. Experimental results were compared to analytical predictions. Data showed that the force versus deformation is very strongly dependent on the details of the fiber form or forms being used. There is structural relaxation during fiber compression. Relaxation is very related to fiber orientation, span length, and fiber breakage during compaction. Relaxation behavior decreases with fiber alignment. Random mats and 0/90 cloth show much more relaxation than unidirectional fibers. Data of relaxation is very well fitted with a Maxwell-Wiechert viscoelastic model.     

Fiber orientation and mechanical properties of short-fiber-reinforced injection-molded composites: Simulated and experimental results

A numerical simulation is presented that combines the flow simulation during injection molding with an efficient algorithm for predicting the orientation of short fibers in thin composite parts. Fiber-orientation state is represented in terms of a second-order orientation tensor. Fiber-fiber interactions are modeled by means of an isotropic rotary diffusion. The simulation predicts flow-aligned fiber orientation (shell region)near the surface with transversely aligned (core region) fibers in the vicinity of the mid-plane. The effects of part thickness and injection speed on fiber orientation are analyzed. Experimental measurements of fiber orientation in plaque-shaped parts for three different combinations of cavity thickness and injection speed are reported. It is found that gapwise-converging flow due to the growing layer of solidified polymer near the walls tends to flow-align the fibers near the entrance, whereas near the melt front, gapwise-diverging flow due to the diminishing solid layer tends to lign the fibers transverse to the flow. The effect of this gapwise-converging-diverging flow is found to be especially significant for thin parts molded at slower injection speeds, which have a proportionately thicker layer of solidified polymer during the filling process. If the fiber orientation is known, predictions of the anisotropic tensile moduli and thermal-expansion coefficients of the composite are obtained by using the equations for unidirectional composites and taking an orientation average. These predictions are found to agree reasonably well with corresponding experimental measurements.     

Properties enhancement of short glass fiber‐reinforced thermoplastics via sandwich injection molding

This article demonstrates using sandwich injection molding in order to improve the mechanical properties of short glass fiber‐reinforced thermoplastic parts by investigating the effect of fiber orientation, phase separation, and fiber attrition compared to conventional injection molding. In the present case, the effect of short glass fiber content (varying from 0–40 wt%) within the skin and core materials were studied. The results show that the mechanical properties strongly depend not only on the fiber concentration, but also on the fiber orientation and the fiber length distribution inside the injection‐molded part. Slight discrepancies in the findings can be assumed to be due to fiber breakage occurring during the mode of processing. POLYM. COMPOS., 26:823–831, 2005. © 2005 Society of Plastics Engineers     

注塑成型FRP的力学性能预测的数值模拟

纤维增强复合材料的力学性能和热物理性能强烈地依赖于纤维的取向状态，在注射成型过程中，纤维最终的取向状态依赖于充填过程的速度场，因此最终的产品性质依赖于成型的详细过程。研究发现，注塑成型制品的结构呈层状分布，层的数目依赖于模具几何和成型条件，不过大多数的结构在成型表面为沿流动方向取向，而在中心层为横向排列，有时在制件表面还有一层薄的介于二者之间排列的取向层。本文主要给出在两个简单模型中的纤维取向预测的理论和数值方法，这两个模型分别为：中心浇口圆盘和边浇口长条。     

Multi‐gating injection molding to enhance the thermal conductivity of carbon fiber/polysulfone composite

Carbon fiber was blended into the polysulfone matrix by twin screw extruder. The polymer composites samples were prepared using four different processing technologies, the compression molding, edge‐gating injection molding, sprue‐gating injection molding, and the multi‐gating injection molding techniques. Among four techniques, the composite samples manufactured by multi‐gating injection molding technique got a higher value of thermal conductivity, which is due to the carbon fibers orientation and distribution. The experimental result indicated that the fiber orientation have a significant influence on the thermal conductivity of polymer composites. The thermal conductivity of sample made by multi‐gating injection molding was 1.82 W/(m·K) when the fiber content was 26 vol%, which was nearly twice than the values obtained by conventional technologies. POLYM. COMPOS., 38:185–191, 2017. © 2015 Society of Plastics Engineers     

Study on mechanical properties and material distribution of sandwich plaques molded by co‐injection

In the sandwich injection molding process (co‐injection), two different polymer melts are sequentially injected into a mold to form a part with a skin/core structure. Sandwich molding can be used for recycling, improving barrier and electrical properties, or producing parts with tailored mechanical properties. In this study the evaluation of flexural modulus and impact strength of co‐injected plaques have been investigated. Virgin and short glass fiber reinforced (10 and 40%) polypropylene were used in six different combinations of sandwiched layers. The skin and core thicknesses were measured by optical microscopy and used to calculate the theoretical flexural modulus, which was compared to the experimentally measured modulus. Fiber orientation states were also observed by scanning electronic microscopy (SEM) at some specific locations and their effect on mechanical properties discussed. The experimental results indicate that an important improvement in transverse modulus, near the gate, is obtained when the virgin polypropylene (PP) is used as a skin and 40% short glass fiber polypropylene (PP40) as core. When both skin and core are made of PP40, the flexural moduli are slightly higher than conventionally injected PP40. POLYM. COMPOS. 26:265–275, 2005. © 2005 Society of Plastics Engineers.     

Shear Enhanced Fiber Orientation and Adhesion in PP/Glass Fiber Composites

Summary: In order to achieve better mechanical properties, most work on polymer/fiber composites has been focused on the importance of the chemistry used to modify the surface of the fibers and improving the adhesion between the fiber and the matrix using coupling agents. Our purpose in this study was to determine the effect of shear on the fiber orientation and interfacial adhesion in poly(propylene)/glass fiber composites via dynamic packing injection molding (DPIM), in which the melt is first injected into the mold and then forced to move repeatedly in a chamber by two pistons that move reversibly with the same frequency as the solidification progressively occurs from the mold wall to the molding core part. SEM, TGA, FT‐IR, AFM and mechanical testing were used to characterize the samples obtained. The majority of fibers are aligned parallel to the flow direction along the sample thickness, even at the core, in contrast to the products obtained via conventional injection molding where the orientation of fibers is observed only at the skin. More importantly, we found that shear could enhance not only the fiber orientation, but also the interfacial adhesion between the fibers and the matrix, particularly for samples with higher fiber contents, resulting in an obvious increase in tensile strength and the onset degradation temperature. A possible transcrystallization was evidenced by AFM investigations of the dynamic packing injection molded samples, which is worth further study.

SEM micrographs representing the glass fiber after PP in the composites was extracted (GF30, dynamic sample).