Investigation of the inhibition effect of 5-((E)-4-phenylbuta-1,3-dienylideneamino)-1,3,4-thiadiazole-2-thiol Schiff base on mild steel corrosion in hydrochloric acid

The inhibition effect of 5-((E)-4-phenylbuta-1,3-dienylideneamino)-1,3,4-thiadiazole-2-thiol (PDTT) Schiff base on mild steel corrosion in 0.5 M HCl was studied for both short and long immersion time. For this purpose, potentiodynamic polarization, electrochemical impedance spectroscopy, linear polarization resistance, hydrogen gas evolution, the change of open circuit potential as a function of immersion time, SEM and AFM techniques were utilized. The PDTT Schiff base has shown remarkable inhibition on the corrosion of mild steel in 0.5 M HCl solution. The high inhibition efficiency was attributed to the blocking of active sites by adsorption of inhibitor molecules on the steel surface.     

Thermodynamic, electrochemical and quantum chemical investigation of some Schiff bases as corrosion inhibitors for mild steel in hydrochloric acid solutions

The corrosion inhibition of mild steel in 1.0 M HCl solution by four Schiff bases was investigated using weight loss and electrochemical measurements and quantum chemical calculations. All compounds showed >90% inhibition efficiency at their optimum concentrations. The activation energy (E_a) of corrosion and other thermodynamic parameters were calculated to elaborate the mechanism of corrosion inhibition. The adsorption of the inhibitors on the mild steel surface follows Langmuir isotherm model. Polarization studies indicated that all studied inhibitors are mixed type. The computed quantum chemical properties viz., electron affinity (EA) and molecular band gap (ΔE_MBG) show good correlation with experimental inhibition efficiencies.     

Corrosion inhibition of mild steel by plant extract in dilute HCl medium

The inhibition effect of Zenthoxylum alatum plant extract on the corrosion of mild steel in 5% and 15% aqueous hydrochloric acid solution has been investigated by weight loss and electrochemical impedance spectroscopy (EIS). The corrosion inhibition efficiency increases on increasing plant extract concentration till 2400 ppm. The effect of temperature on the corrosion behaviour of mild steel in 5% and 15% HCl with addition of plant extract was studied in the temperature range 50-80 °C. Surface analysis (SEM, XPS and FT-IR) was also carried out to establish the corrosion inhibitive property of this plant extract in HCl solution. Plant extract is able to reduce the corrosion of steel more effectively in 5% HCl than in 15% HCl. The adsorption of this plant extract on the mild steel surface obeys the Langmuir adsorption isotherm.     

A cationic gemini-surfactant as effective inhibitor for mild steel in HCl solutions

A cationic gemini-surfactant, namely 1,4-bis (1-chlorobenzyl-benzimidazolyl)-butane (CBB) was synthesized and its inhibition effect on the corrosion of mild steel in 0.5 M HCl solution was investigated by weight loss and electrochemical techniques. The results showed that CBB acts as an excellent corrosion inhibitor in 0.5 M HCl by suppressing simultaneously the cathodic and anodic processes via chemical adsorption on the surface of steel, which followed the Langmuir adsorption isotherm. The inhibition efficiency increased with the increase of CBB concentration and temperature. The adsorption mechanism of the compound was discussed in terms of thermodynamic and kinetic parameters deduced from the experimental data.     

Novel isoxazolium cationic Schiff base compounds as corrosion inhibitors for carbon steel in hydrochloric acid

The corrosion of carbon steel in 0.5 M HCl at 25 °C was investigated in the presence of two synthesized quaternary isoxazolium Schiff base series using gravimetric, polarization and electrochemical impedance measurements. The measurements showed a gradual increase in the inhibitors efficiencies by increasing the dose and hydrophobic chain length. The calculated activation energies proposed that the inhibitor molecules are adsorbed physically onto the metal surface. Surface activity-inhibition tendency relation showed the gradual increase of the inhibition efficiency by increasing the hydrophobic chain length.     

The Inhibition Effect of Synthesized 4-Hydroxybenzaldehyde-1,3propandiamine on the Corrosion of Mild Steel in 1 M HCl

The corrosion inhibition of mild steel in 1 M HCl by 4-hydroxybenzaldehyde-1,3propandiamine (4-HBP) has been investigated using potentiodynamic polarization, electrochemical impedance spectroscopy and chronoamperometry measurements. The experimental results suggest that this compound is an excellent corrosion inhibitor for mild steel and the inhibition efficiency increases with the increase in inhibitor concentration. Polarization curves reveal that this organic compound is a mixed-type inhibitor. The effect of temperature on the corrosion behavior of mild steel in 1 M HCl with the addition of the Schiff base was studied in the temperature range from 25 to 65 °C. The experimentally obtained adsorption isotherms follow the Langmuir equation. Activation parameters and thermodynamic adsorption parameters of the corrosion process such as E _a, ΔH, ΔS, K _ads, and ΔG _ads were calculated by the obtained corrosion currents at different temperatures and using the adsorption isotherm. The morphology of mild steel surface after its exposure to 1 M HCl solution in the absence and in the presence of 4-HBP was examined by AFM images.     

The inhibitive effect of some bis-N,S-bidentate Schiff bases on corrosion behaviour of 304 stainless steel in hydrochloric acid solution

The inhibition effect of four new Schiff bases on the corrosion of 304 stainless steel in 1 M HCl has been studied by polarization, electrochemical impedance spectroscopy (EIS) and weight loss measurements. Polarization curves indicated that all studied Schiff bases act as mixed type (cathodic/anodic) inhibitors. The adsorption of the inhibitors was well described by the Langmuir adsorption isotherm and the adsorption isotherm parameters (K_ads, ΔG_ads) were determined at room temperature. Effect of temperature on the efficiency of the corrosion inhibition process was studied and the values of activation energy, pre-exponential factor (λ), enthalpy of activation and entropy of activation were calculated to elaborate the mechanism of corrosion inhibition. Differences in inhibition efficiency between four tested inhibitors are correlated with their chemical structures.     

Corrosion inhibition of mild steel by schiff base compounds in various aqueous solutions: part 1

The corrosion inhibition by Schiff base compounds derived from diamines and o-hydroxy, o-methoxy aromatic aldehydes was investigated by weight loss, electrochemical measurements and surface analysis of SS 400 in various aqueous solutions such as tap water (LC), concentrated tap water (HC) and HCl solutions. The maximum inhibition efficiency (η) of N,N′-bis (salicylaldehyde)-1,12-diaminododecane (Saldn) for SS 400 in HCl solution approached 93%. The adsorption of Saldn on mild steel in HCl solution was obeyed Langmuirs isotherm.     

Electrochemical and theoretical investigation on the corrosion inhibition of mild steel by thiosalicylaldehyde derivatives in hydrochloric acid solution

Inhibitory effect of three Schiff bases 2-{[(2-sulfanylphenyl)imino]methyl}]phenol (A), 2-{[(2)-1-(4-methylphenyl)methylidene]amino}-1-benznethiol (B), and 2-[(2-sulfanylphen-yl)ethanimidoyl)]phenol (C) on corrosion of mild steel in 15% HCl solution has been studied using weight loss measurements, polarization and electrochemical impedance spectroscopy (EIS) methods. The results of the investigation show that the compounds A and B with mean efficiency of 99% at 200 mg/L additive concentration have fairly good inhibiting properties for mild steel corrosion in hydrochloric acid, and they are as mixed inhibitor. All measurements show that inhibition efficiencies increase with increase in inhibitor concentration. This reveals that inhibitive actions of inhibitors were mainly due to adsorption on mild steel surface. Adsorption of these inhibitors follows the Langmuir adsorption isotherm. Thermodynamic adsorption parameters (K_ads, ΔG_ads) of studied Schiff bases were calculated using the Langmuir adsorption isotherm. Activation parameters of the corrosion process such as activation energies, E_a, activation enthalpies, ΔH^∗, and activation entropies, ΔS^∗, were calculated by the obtained corrosion currents at different temperatures. Obvious correlation was found between the corrosion inhibition efficiency and the calculated parameters. The obtained theoretical results have been adapted with the experimental data.     

Corrosion inhibition of mild steel in hydrochloric acid solution by some double Schiff bases

The inhibition effect of four double Schiff bases on the corrosion of mild steel in 2 M HCl has been studied by polarization, electrochemical impedance spectroscopy (EIS) and weight loss measurements. The inhibitors were adsorbed on the steel surface according to the Langmuir adsorption isotherm model. From the adsorption isotherm, some thermodynamic data for the adsorption process were calculated and discussed. Kinetic parameters activation such as E_a, ΔH∗, ΔS∗ were evaluated from the effect of temperature on corrosion and inhibition processes. Quantum chemical calculations have been performed and several quantum chemical indices were calculated and correlated with the corresponding inhibition efficiencies.     

3-氨基-1,2,4-三氮唑及3-氨基-1,2,4-三氮唑并芳香醛类希夫碱自组装膜对碳钢在0.5mol/L盐酸中的缓蚀性能研究

目的通过自组装技术在碳钢表面得到3-氨基-1,2,4-三氮唑及3种3-氨基-1,2,4-三氮唑并芳香醛类希夫碱的三种自组装膜,提高碳钢在0.5 mol/L HCl溶液中的缓蚀性能。方法采用电化学方法如电化学阻抗谱、tafel极化曲线等研究席夫碱类自组装膜在盐酸中的电化学参数,如阻抗变化、腐蚀电位、腐蚀电流。采用XPS方法对自组装膜的成分进行表征。结果计算自组装膜在盐酸溶液中的最高缓蚀效率达到92.72%,XPS测试表明自组装分子与金属原子以化学键的方式结合。结论 3-氨基-1,2,4-三氮唑及3种3-氨基-1,2,4-三氮唑并芳香醛类希夫碱自组装膜均对碳钢在盐酸中有良好的缓蚀性能,缓蚀效率的大小与分子结构有关,分子中的O、N杂原子、卤素基团、三唑环及苯环等有利于自组装膜的形成。     

Corrosion inhibition efficiency and surface activity of benzothiazol-3-ium cationic Schiff base derivatives in hydrochloric acid

Two series of cationic Schiff base surfactants namely: 2-(benzylideneamino)-3-(2-oxo-2-alkoxyethyl)-1,3-benzothiazol-3-ium bromide and 2-[(4-methoxybenzylidene)amino]-3-(2-oxo-2-alkoxyethyl)-1,3-benzothiazol-3-ium bromide were prepared and confirmed using elemental analysis, FTIR, and ¹H NMR spectra. The surface activity of the synthesized Schiff bases showed their tendency towards adsorption at the interfaces. The prepared compounds were evaluated as corrosion inhibitors for carbon steel in 0.5 M HCl solution using gravimetric and polarization measurements. By fitting the gravimetric data, some thermodynamic and kinetic parameters were estimated. The adsorption of the inhibitors on the carbon steel surface obeyed Langmuir adsorption isotherm and had a physical mechanism. Polarization measurements showed that the synthesized inhibitors act as mixed inhibitors for carbon steel in the acidic media. The results of the corrosion inhibition using two different methods showed narrow differences in the obtained values between the two methods within 5%.     

Novel thiophene symmetrical Schiff base compounds as corrosion inhibitor for mild steel in acidic media

The inhibiting effect of two Schiff bases on the corrosion of the mild steel (MS) in 1 M HCl has been studied by electrochemical impedance spectroscopy (EIS) and Tafel polarisation measurements. The Schiff bases, 4,4′-bis(3-carboxaldehyde thiophene) diphenyl diimino ether (L₁) and 4,4′-bis(3-carboxaldehyde thiophene) diphenyl diimino ethane (L₂), were synthesized using 3-carboxaldehydethiophene and its corresponding amine. Polarisation curves reveal that both compounds are mixed type (cathodic/anodic) inhibitors and inhibition efficiency (% IE) increases with increasing concentration of compounds. It is suggested that their effects depend on their concentrations and the molecular structures. Adsorption of compounds on mild steel surface is spontaneous and obeys Langmuir’s isotherm.     

Cefotaxime sodium: A new and efficient corrosion inhibitor for mild steel in hydrochloric acid solution

The corrosion inhibition of mild steel in 1 M HCl solution by cefotaxime sodium has been studied by Tafel polarization, electrochemical impedance spectroscopy (EIS) and weight loss measurement. The inhibitor showed 95.8% inhibition efficiency at optimum concentration 300 ppm. Results obtained revealed that inhibition occurs through adsorption of the cefotaxime on metal surface without modifying the mechanism of corrosion process. Potentiodynamic polarization studies suggest that it is a mixed type of inhibitor. Electrochemical impedance spectroscopy techniques were also used to investigate the mechanism of corrosion inhibition.     

Investigation on some Schiff bases as corrosion inhibitors for mild steel

In the present work, the effect of some newly synthesized Schiff bases containing sulphur nitrogen as heteroatom was investigated on mild steel corrosion in acidic media. Electrochemical studies of the mild steel samples were performed in an aerated solution of 0.1 M HCl + dimethyl sulphoxide (DMS) as co-solvent. DMS is also behaving as a corrosion inhibitor for mild steel. At low inhibitor concentration and short immersion time one can see only the inhibitive effect of DMS as anodic inhibitor for mild steel. At high concentration and long immersion time inhibition efficiencies are increased and cathodic inhibition is observed.     

Adsorption and inhibitive properties of some new Mannich bases of Isatin derivatives on corrosion of mild steel in acidic media

Adsorption of four derivatives of piperidinylmethylindoline-2-one on mild steel surface in 1 M HCl solution and its corrosion inhibition properties has been studied by a series of techniques, such as polarization, electrochemical impedance spectroscopy (EIS), weight loss and quantum chemical calculation methods. The values of activation energy (E_a) for mild steel corrosion and various thermodynamic parameters were calculated and discussed. Potentiodynamic polarization measurements showed that all inhibitors are mixed type. The degree of surface coverage was determined by using weight loss measurements and it was found that adsorption process of studied inhibitors on mild steel surface obeys Langmuir adsorption isotherm.     

Investigation of the inhibiting effect of N-[(Z)-1-phenylemethyleidene]-N-{2-[(2-{[(Z)-1phenylmethylidene]amino}phenyl)disulfanyl]phenyl} amine and its derivatives on the corrosion of stainless steel 304 in acid media

The effect of newly synthesized S₂N₂-Schiff bases is investigated on stainless steel 304 corrosion in 15% hydrochloric acid. The Tafel curves of the steel in hydrochloric acid containing Schiff bases show inhibition for both cathodic and anodic processes. Moreover, double layer capacitance and charge transfer resistance values are derived from Nyquist plots. The inhibition efficiency of Schiff bases increases with the increase in inhibitor concentration and temperature. Moreover, Langmuir adsorption isotherm is suitable to fit experimental data of the studied inhibitors. Effect of temperature on the efficiency of the corrosion inhibition shows chemisorption of inhibitors on the surface of metal.     

Electrochemical effect of cationic gemini surfactant and halide salts on corrosion inhibition of low carbon steel in acid medium

In this paper, the corrosion inhibition of cationic gemini surfactant, in the absence and presence of halide salts (NaCl, NaBr and NaI) on steel in HCl was investigated at 20 ± 1 °C. The effects of pH, immersion time and salt concentration on the corrosion inhibition of steel were studied using weight loss, open circuit potential and electrochemical impedance spectroscopy. Inhibition efficiency increases by increasing surfactant concentration. Synergistic effect between surfactant and salts was studied. The inhibition efficiency increases by increasing salt concentration. This composite inhibitor containing gemini surfactant and halide was efficient and low-cost for steel corrosion inhibition in HCl.     

Experimental and theoretical studies for mild steel corrosion inhibition in 1 M HCl by two new benzothiazine derivatives

The inhibition effect of new heterocyclic compounds, namely 2-aryl-benzothiazin-3-one (P1) and 3-aryl-benzothiazin-2-one (P2) on mild steel corrosion in 1 M HCl was investigated using electrochemical measurements. The results indicated that the inhibition efficiency depends on concentration and molecular structure of the investigated compounds. It is also found that the inhibition of P1 is greater than P2. The molecular structure effect on the corrosion inhibition efficiency was investigated using DFT calculations. The structural and electronic parameters were calculated and discussed. The obtained results show that the experimental and theoretical studies agree well and confirm that P1 is the better inhibitor.     

Schiff’s base of pyridyl substituted triazoles as new and effective corrosion inhibitors for mild steel in hydrochloric acid solution

Three Schiff’s bases namely (3-phenylallylidene) amino-5-(pyridine-4-yl)-4H-1,2,4-triazole-3-thiol (SB-1), 3-mercapto-5 (pyridine-4-yl)-4H-1,2,4-triazole-4-yl) imino) methyl) phenol (SB-2) and (4-nitrobenzylidene) amino)-5-(pyridine-4-yl)-4H-1,2,4-triazole-3-thiol (SB-3) were synthesized and investigated as corrosion inhibitors for mild steel (MS) in 1 M HCl. SB-1 exhibited best inhibition performance (96.6 η%) at 150 mg L⁻¹. The studied inhibitors follow Langmuir adsorption isotherm. Potentiodynamic polarization data suggests mixed-mode of corrosion inhibition. The effect of molecular structure on inhibition efficiency was investigated by theoretical calculations using density function theory (DFT) methods. Surface analysis supports the formation of a protective inhibitor film on the mild steel surface.