基于能量和密度的WSNs动态分区成簇路由算法

针对传统的层次型网络存在的分簇不合理和能耗不均衡等问题,提出了一种基于能量和密度的动态非均匀分区成簇路由算法。该算法先根据节点与基站之间的距离将网络合理地进行动态的区域划分,在区域内成簇,使靠近基站的簇规模小于距离基站较远的簇,减少靠近基站的簇首负担和能量消耗;通过综合考虑节点剩余能量和节点密度等因素来优化簇的非均匀划分和簇首的选择,簇首间采取基于数据聚合的多跳传输机制。仿真结果表明,与经典路由算法LEACH相比,该算法能有效均衡节点能耗,延长网络生命周期。     

Dual head static clustering algorithm for wireless sensor networks

Clustering of nodes is often used in wireless sensor networks to achieve data aggregation and reduce the number of nodes transmitting the data to the sink. This paper proposes a novel dual head static clustering algorithm (DHSCA) to equalise energy consumption by the sensor nodes and increase the wireless sensor network lifetime. Nodes are divided into static clusters based on their location to avoid the overhead of cluster re-formation in dynamic clustering. Two nodes in each cluster, selected on the basis of the their residual energy and their distance from the sink and other nodes in the cluster, are designated as cluster heads, one for data aggregation and the other for data transmission. This reduces energy consumption during intra-cluster and inter-cluster communication. A multi-hop technique avoiding the hot-spot problem is used to transmit the data to the sink. Experiments to observe the energy consumption patterns of the nodes and the fraction of packets successfully delivered using the DHSCA suggest improvements in energy consumption equalisation, which, in turn, enhances the lifetime of the network. The algorithm is shown to outperform all the other static clustering algorithms, while being comparable with the performance of the best dynamic algorithm.     

Energy efficient path selection for mobile sink and data gathering in wireless sensor networks

Mobile sink (MS) has drawn significant attention for solving hot spot problem (also known as energy hole problem) that results from multihop data collection using static sink in wireless sensor networks (WSNs). MS is regarded as a potential solution towards this problem as it significantly reduces energy consumption of the sensor nodes and thus enhances network lifetime. In this paper, we first propose an algorithm for designing efficient trajectory for MS, based on rendezvous points (RPs). We next propose another algorithm for the same problem which considers delay bound path formation of the MS. Both the algorithms use k-means clustering and a weight function by considering several network parameters for efficient selection of the RPs by ensuring the coverage of the entire network. We also propose an MS scheduling technique for effective data gathering. The effectiveness of the proposed algorithms is demonstrated through rigorous simulations and comparisons with some of the existing algorithms over several performance metrics.     

A grid based clustering and routing algorithm for solving hot spot problem in wireless sensor networks

Energy conservation of the sensor nodes is the most important issue that has been studied extensively in the design of wireless sensor networks (WSNs). In many applications, the nodes closer to the sink are overburdened with huge traffic load as the data from the entire region are forwarded through them to reach the sink. As a result, their energy gets exhausted quickly and the network is partitioned. This is commonly known as hot spot problem. Moreover, sensor nodes are prone to failure due to several factors such as environmental hazards, battery exhaustion, hardware damage and so on. However, failure of cluster heads (CHs) in a two tire WSN is more perilous. Therefore, apart from energy efficiency, any clustering or routing algorithm has to cope with fault tolerance of CHs. In this paper, we address the hot spot problem and propose grid based clustering and routing algorithms, combinedly called GFTCRA (grid based fault tolerant clustering and routing algorithms) which takes care the failure of the CHs. The algorithms follow distributed approach. We also present a distributed run time management for all member sensor nodes of any cluster in case of failure of their CHs. The routing algorithm is also shown to tolerate the sudden failure of the CHs. The algorithms are tested through simulation with various scenarios of WSN and the simulation results show that the proposed method performs better than two other grid based algorithms in terms of network lifetime, energy consumption and number of dead sensor nodes.     

Energy Efficient Energy Hole Repelling (EEEHR) Algorithm for Delay Tolerant Wireless Sensor Network

Reducing energy consumption and increasing network lifetime are the major concerns in Wireless Sensor Network (WSN). Increase in network lifetime reduces the frequency of recharging and replacing batteries of the sensor node. The key factors influencing energy consumption are distance and number of bits transmitted inside the network. The problem of energy hole and hotspot inside the network make neighbouring nodes unusable even if the node is efficient for data transmission. Energy Efficient Energy Hole Repelling (EEEHR) routing algorithm is developed to solve the problem. Smaller clusters are formed near the sink and clusters of larger size are made with nodes far from the sink. This methodology promotes equal sharing of load repelling energy hole and hotspot issues. The opportunity of being a Cluster Head (CH) is given to a node with high residual energy, very low intra cluster distance in case of nodes far away from the sink and very low CH to sink distance for the nodes one hop from the sink. The proposed algorithm is compared with LEACH, LEACH-C and SEP routing protocol to prove its novel working. The proposed EEEHR routing algorithm provides improved lifetime, throughput and less packet drop. The proposed algorithm also reduces energy hole and hotspot problem in the network.     

Energy efficient clustering algorithms for wireless sensor networks: novel chemical reaction optimization approach

Clustering has been accepted as one of the most efficient techniques for conserving energy of wireless sensor networks (WSNs). However, in a two-tiered cluster based WSN, cluster heads (CHs) consume more energy due to extra overload for receiving data from their member sensor nodes, aggregating them and transmitting that data to the base station (BS). Therefore, proper selection of CHs and optimal formation of clusters play a crucial role to conserve the energy of sensor nodes for prolonging the lifetime of WSNs. In this paper, we propose an energy efficient CH selection and energy balanced cluster formation algorithms, which are based on novel chemical reaction optimization technique (nCRO), we jointly called these algorithms as novel CRO based energy efficient clustering algorithms (nCRO-ECA). These algorithms are developed with efficient schemes of molecular structure encoding and potential energy functions. For the energy efficiency, we consider various parameters such as intra-cluster distance, sink distance and residual energy of sensor nodes in the CH selection phase. In the cluster formation phase, we consider various distance and energy parameters. The algorithm is tested extensively on various scenarios of WSNs by varying number of sensor nodes and CHs. The results are compared with original CRO based algorithm, namely CRO-ECA and some existing algorithms to demonstrate the superiority of the proposed algorithm in terms of energy consumption, network lifetime, packets received by the BS and convergence rate.     

Fuzzy-based unequal clustering protocol for underwater wireless sensor networks

Underwater wireless sensor network (UWSN) is a network made up of underwater sensor nodes, anchor nodes, surface sink nodes or surface stations, and the offshore sink node. Energy consumption, limited bandwidth, propagation delay, high bit error rate, stability, scalability, and network lifetime are the key challenges related to underwater wireless sensor networks. Clustering is used to mitigate these issues. In this work, fuzzy-based unequal clustering protocol (FBUCP) is proposed that does cluster head selection using fuzzy logic as it can deal with the uncertainties of the harsh atmosphere in the water. Cluster heads are selected using linguistic input variables like distance to the surface sink node, residual energy, and node density and linguistic output variables like cluster head advertisement radius and rank of underwater sensor nodes. Unequal clustering is used to have an unequal size of the cluster which deals with the problem of excess energy usage of the underwater sensor nodes near the surface sink node, called the hot spot problem. Data gathered by the cluster heads are transmitted to the surface sink node using neighboring cluster heads in the direction of the surface sink node. Dijkstra's shortest path algorithm is used for multi-hop and inter-cluster routing. The FBUCP is compared with the LEACH-UWSN, CDBR, and FBCA protocols for underwater wireless sensor networks. A comparative analysis shows that in first node dies, the FBUCP is up to 80% better, has 64.86% more network lifetime, has 91% more number of packets transmitted to the surface sink node, and is up to 58.81% more energy efficient than LEACH-UWSN, CDBR, and FBCA.     

Flower pollination algorithm‐based energy‐efficient stable clustering approach for WSNs

The advances in the size, cost of deployment, and user‐friendly interface of wireless sensor devices have given rise to many wireless sensor network (WSN) applications. WSNs need to use protocols for transmitting data samples from event regions to sink through minimum cost links. Clustering is a commonly used method of data aggregation in which nodes are organized into groups to reduce energy consumption. Nonetheless, cluster head (CH) has to bear an additional load in clustering protocols to organize different activities within the cluster. Proper CH selection and load balancing using efficient routing protocol is therefore a critical aspect for WSN's long‐term operation. In this paper, a threshold‐sensitive energy‐efficient cluster‐based routing protocol based on flower pollination algorithm (FPA) is proposed to extend the network's stability period. Using FPA, multihop communication between CHs and base station is used to achieve optimal link costs for load balancing distant CHs and energy minimization. Analysis and simulation results show that the proposed algorithm significantly outperforms competitive clustering algorithms in terms of energy consumption, stability period, and system lifetime.     

Flow-balanced routing for multi-hop clustered wireless sensor networks

Power efficiency and coverage preservation are two important performance metrics for a wireless sensor network. However, there is scarcely any protocol to consider them at the same time. In this paper, we propose a flow-balanced routing (FBR) protocol for multi-hop clustered wireless sensor networks that attempts to achieve both power efficiency and coverage preservation. The proposed protocol consists of four algorithms, one each for network clustering, multi-hop backbone construction, flow-balanced transmission, and rerouting. The proposed clustering algorithm groups several sensors into one cluster on the basis of overlapping degrees of sensors. The backbone construction algorithm constructs a novel multi-level backbone, which is not necessarily a tree, using the cluster heads and the sink. Furthermore, the flow-balanced routing algorithm assigns the transferred data over multiple paths from the sensors to the sink in order to equalize the power consumption of sensors. Lastly, the rerouting algorithm reconstructs the network topology only in a place where a head drops out from the backbone due to the head running out of its energy. Two metrics called the network lifetime and the coverage lifetime are used to evaluate the performance of FBR protocol in comparison with previous ones. The simulation results show that FBR yields both much longer lifetime and better coverage preservation than previous protocols. For example, FBR yields more than twice network lifetime and better coverage preservation than a previous efficient protocol, called the coverage-preserving clustering protocol (CPCP) [18], when the first sensor dies and the network coverage is kept at 100%, respectively.     

一种基于K-means的WSN移动汇聚路由算法

无线传感网络(Wireless Sensor Network,WSN)作为一种资源受限的网络,网络中节点的能耗直接影响了网络的性能。因此,均衡网络中的能耗,延长网络的生命周期,成为设计WSN路由算法的重要目标。于是,在LEACH-C协议的基础上提出了一种移动汇聚路由算法。分簇阶段由Sink节点计算最优簇首个数,通过K-means聚类将网络中的节点划分至不同的集群,选择通信成本最低的节点作为各集群的簇首。稳定传输阶段通过移动Sink进行数据采集,针对不同的延迟分别规划Sink节点的移动轨迹。MATLAB仿真结果表明,与LEACH和LEAHC-C算法相比簇首的分布更合理,结合Sink节点的移动策略能有效均衡网络能耗,延长网络的寿命。     

基于TinyOS的无线传感器网络LEACH算法的改进

LEACH协议是无线传感器网络中最流行的分簇路由协议之一.针对LEACH算法簇分布不均匀以及网络能耗不均衡等问题提出了一种高效节能多跳路由算法.在簇建立阶段,新算法根据网络模型计算出最优簇头间距值,调整节点通信半径以控制簇的大小,形成合理网络拓扑结构;在数据传输阶段,簇头与基站之间采用多跳的通信方式,降低了节点能耗.在TinyOS操作系统下,使用nesC语言设计实现了LEACH-EEMH算法.基于TOSSIM平台的仿真结果表明,新算法较LEACH算法在均衡网络能耗、延长网络寿命方面具有显著优势.     

FUCA: Fuzzy‐based unequal clustering algorithm to prolong the lifetime of wireless sensor networks

Wireless sensor network comprises billions of nodes that work collaboratively, gather data, and transmit to the sink. “Energy hole” or “hotspot” problem is a phenomenon in which nodes near to the sink die prematurely, which causes the network partition. This is because of the imbalance of the consumption of energy by the nodes in wireless sensor networks. This decreases the network's lifetime. Unequal clustering is a technique to cope up with this issue. In this paper, an algorithm, “fuzzy‐based unequal clustering algorithm,” is proposed to prolong the lifetime of the network. This protocol forms unequal clusters. This is to balance the energy consumption. Cluster head selection is done through fuzzy logic approach. Input variables are the distance to base station, residual energy, and density. Competition radius and rank are the two output fuzzy variables. Mamdani method is employed for fuzzy inference. The protocol is compared with well‐known algorithms, like low‐energy adaptive clustering hierarchy, energy‐aware unequal clustering fuzzy, multi‐objective fuzzy clustering algorithm, and fuzzy‐based unequal clustering under different network scenarios. In all the scenarios, the proposed protocol performs better. It extends the lifetime of the network as compared with its counterparts.     

基于分簇的无线传感器网络路由算法

在大规模无线传感器网络中以最节能的方式将数据发送到sink是该领域研究的热点之一。针对LEACH算法的不足之处,提出了一种能耗均衡的路由算法。此算法在考虑节点剩余能量的基础上采用两分法选举簇首,然后簇首通过能耗代价函数计算出一条能耗最小的路径,以多跳转发的方式将数据传送到sink.,为了进一步减少节点的能耗,算法在簇内采用了数据聚合机制。仿真结果表明,算法有效地均衡了网络能耗,延长了网络生存期。     

交通路灯监控系统的无线传感网链状路由算法

在交通路灯监控系统中为节省网络节点能耗和降低数据传输时延,提出一种无线传感网链状路由算法（CRASMS）。该算法根据节点和监控区域的信息将监控区域分成若干个簇区域,在每一个簇区域中依次循环选择某个节点为簇头节点,通过簇头节点和传感节点的通信建立簇内星型网络,最终簇头节点接收传感节点数据,采用数据融合算法降低数据冗余,通过簇头节点间的多跳路由将数据传输到Sink节点并将用户端的指令传输到被控节点。仿真结果表明：CRASMS算法保持了PEGASIS算法在节点能耗方面和LEACH算法在传输时延方面的优点,克服了PEGASIS 算法在传输时延方面和LEACH算法在节点能耗方面的不足,将网络平均节点能耗和平均数据传输时延保持在较低水平。在一定的条件下,CRASMS算法比LEACH和PEGASIS算法更优。     

Energy Efficient Clustering Algorithm Using RFD Based Multi-hop Communication in Wireless Sensor Networks

In recent years, researchers have focused on many challenging aspects in the area of Wireless Sensor networks (WSNs). Development of energy efficient data collection protocols became the major concern in WSN. Clustering is one of the suitable techniques for energy efficiency. However, in clustering, the cluster are formed with uneven size. This unbalances the energy consumption among clusters which in turn reduce the lifetime of the network. In this paper, in order to balance the energy among clusters, a multi-hop concept is introduced for both intra and inter cluster communication. Firstly, the RFDMRP: River Formation Dynamics based Multi-hop Routing Protocol has been proposed. Later, this protocol is integrated with clustering and a new hybrid technique, named as hybrid clustering communication algorithm using RFDMRP (HCCRFD) is introduced. HCCRFD improves energy conservation by reducing overall packet transmission distance of intra and inter cluster communication, which results in increased network lifetime. Energy consumption of proposed algorithm has been analyzed mathematically. Also, the algorithms were simulated using MATLAB and outputs observed. The observed outputs were compared with existing protocols such as LEACH, DEEC, ERA, and \(ACH^2\) in three different scenarios namely homogenous, heterogeneous environment, and node density. The comparison reveals that the proposed algorithm perform better than the existing protocols with respect to energy conservation and network lifetime.     

无线传感器网络基于多元簇首的分簇数据收集算法

为了提高数据收集可靠性和延长网络生命周期,该文提出基于多元簇首的分簇数据收集算法。算法将网络划分为大小相等的栅格,由每个栅格中的节点各自构成一个簇,根据节点失效概率从每个栅格中选出多个簇首,并由同一栅格中的多个簇首协作完成栅格中节点的数据收集任务。此外,算法还采取了一些降低能量开销的措施。仿真实验结果表明,与现有相关算法相比,该算法具有较高的数据收集可靠性,并能够显著延长网络生命周期。     

Novel chemical reaction optimization based unequal clustering and routing algorithms for wireless sensor networks

Energy conserving of sensor nodes is the most crucial issue in the design of wireless sensor networks (WSNs). In a cluster based routing approach, cluster heads (CHs) cooperate with each other to forward their data to the base station (BS) via multi-hop routing. In this process, CHs closer to the BS are burdened with heavier relay traffic and tend to die prematurely which causes network partition is popularly known as a hot spot problem. To mitigate the hot spot problem, in this paper, we propose unequal clustering and routing algorithms based on novel chemical reaction optimization (nCRO) paradigm, we jointly call these algorithms as novel CRO based unequal clustering and routing algorithms (nCRO-UCRA). In clustering, we partition the network into unequal clusters such that smaller size clusters near to the sink and larger size clusters relatively far away from the sink. For this purpose, we develop the CH selection algorithm based on nCRO paradigm and assign the non-cluster head sensor nodes to the CHs based on derived cost function. Then, a routing algorithm is presented which is also based on nCRO based approach. All these algorithms are developed with the efficient schemes of molecular structure encoding and novel potential energy functions. The nCRO-UCRA is simulated extensively on various scenarios of WSNs and varying number of sensors and the CHs. The results are compared with some existing algorithms and original CRO based algorithm called as CRO-UCRA to show the superiority in terms of various performance metrics like residual energy, network lifetime, number of alive nodes, data packets received by the BS and convergence rate.     

Low-Energy Adaptive Unequal Clustering Protocol Using Fuzzy c-Means in Wireless Sensor Networks

Clustering technique in wireless sensor networks incorporate proper utilization of the limited energy resources of the deployed sensor nodes with the highest residual energy that can be used to gather data and send the information. However, the problem of unbalanced energy consumption exists in a particular cluster node in the network. Some more powerful nodes act as cluster head to control sensor network operation when the network is organized into heterogeneous clusters. It is important to assume that energy consumption of these cluster head nodes is balanced. Often the network is organized into clusters of equal size where cluster head nodes bear unequal loads. Instead in this paper, we proposed a new protocol low-energy adaptive unequal clustering protocol using Fuzzy c-means in wireless sensor networks (LAUCF), an unequal clustering size model for the organization of network based on Fuzzy c-means (FCM) clustering algorithm, which can lead to more uniform energy dissipation among the cluster head nodes, thus increasing network lifetime. A heuristic comparison between our proposed protocol LAUCF and other different energy-aware protocol including low energy adaptive clustering hierarchy (LEACH) has been carried out. Simulation result shows that our proposed heterogeneous clustering approach using FCM protocol is more effective in prolonging the network lifetime compared with LEACH and other protocol for long run.     

Fuzzy logic based unequal clustering for wireless sensor networks

The primary challenges in outlining and arranging the operations of wireless sensor networks are to enhance energy utilization and the system lifetime. Clustering is a powerful approach to arranging a system into an associated order, load adjusting and enhancing the system lifetime. In a cluster based network, cluster head closer to the sink depletes its energy quickly resulting in hot spot problems. To conquer this issue, numerous algorithms on unequal clustering are contemplated. The drawback in these algorithms is that the nodes which join with the specific cluster head bring overburden for the cluster head. So, we propose an algorithm called fuzzy based unequal clustering in this paper to enhance the execution of the current algorithms. The proposed work is assessed by utilizing simulation. The proposed algorithm is compared with two algorithms, one with an equivalent clustering algorithm called LEACH and another with an unequal clustering algorithm called EAUCF. The simulation results using MATLAB demonstrate that the proposed algorithm provides better performance compared to the other two algorithms.     

基于PSO优化模糊C均值的WSN分簇路由算法

针对无线传感器网络节点能量有限、负载不均衡的问题,提出了一种基于粒子群优化模糊C均值的分簇路由算法POFCA.POFCA分别从成簇阶段和数据传输阶段进行了优化.成簇阶段,首先使用粒子群优化算法优化模糊C均值算法,克服了模糊C均值对初始聚类中心的敏感,并根据节点剩余能量和相对距离动态更新簇首,平衡簇内负载.数据传输阶段,...