共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
从分析测量船对语音通信的需求开始,主要探讨了测量船在执行载人航天任务时,如何在应急情况下做好航天员与指挥中心之间的话音通信的保障工作。为实现低速率语音通信,将混合激励线性预测(MELP)声码器这种全新的语音编解码器引入到测量船话音通信中,并为这一些新技术与原有系统的融合作了探讨。 相似文献
3.
4.
本文从载人航天通信系统任务和主要技术要求出发,对载人航天通信系统基本组成和主要关键技术问题等进行了技术探讨和研究。 相似文献
5.
在航天通信工程中,航天通信中心负责接收、处理经过各种传输信道(如卫通信道、光纤信道等)来自所有测控站的各种测控通信设备的宇航员下行话音。本文将讨论航天通信中心话音选择切换策略,重点介绍话音自动选优系统的原理及实现方法。 相似文献
6.
半实物短波通信信道仿真器研究 总被引:1,自引:0,他引:1
通信信道的模拟仿真器是通信仿真系统中的重要组成部分,针对短波中影响话音传输和数字传输质量的主要因素,介绍一个短波波段信道模拟器的设计方案,给出具体的组成框图以及主要部分的实现电路。 相似文献
7.
话音终端在载人航天任务中是完成向宇航员传送话音信息的。本文对话音终端的调制、解调及监控的原理进行了详细的叙述,并介绍一种智能化、数字化调制解调器的实现方案。 相似文献
8.
9.
10.
TES网络系统是休斯公司结合中国实际情况研制开发的一种VSAT通信网络,基于卫星的以全数字话音传输为主、兼具中低速数据通信的网状网,系统结构见图1。TES系统由许多节点(或称远端站Remote)和一个网络控制系统(NCS)组成。网络控制系统NCS提供网络管理与控制,是整个网络的核心,可位于任一TES节点。节点有两种类型:TES远端站及TES网关。TES网关支持多条信道进入公共网。TES系统支持网络内任意两个远端站间直接进行话音、同步及异步数据通信。远端站间直接传输话音和数据,因此卫星传输延时最小。系统中话音电路采用按需… 相似文献
11.
针对具有传输干扰的混沌系统的同步问题,提出一种新的全状态射影同步方案.利用Lyapunov稳定性理论,设计了混沌系统的非线性观测器,得到了具有传输干扰的混沌系统射影同步的充分条件.该方案不仅能够得到以特定缩放因子的射影同步,并且可以在不降低可控性的条件下,根据控制的情况,任意调整缩放因子.利用鲁棒稳定性理论进一步证明了所提方案可大大减小传输干扰对混沌射影同步的影响,从而得到了满意的混沌全状态射影同步.最后,以陈氏系统为例,进行数值仿真,验证了所提方案能够有效地抑制混沌同步系统的信道干扰,得到混沌系统的全状态射影同步. 相似文献
12.
使用电话呼叫模拟器对VoFR和VoIP在卫通信道中话音质量进行了系统测试;根据理论分析和测试结果对两种话音质量进行了比较,为卫星通信及长距离、高时延方式下话音传输方式选择提供了重要参考依据. 相似文献
13.
USB系统是航天测控网的重要组成部分。提出了充分利用USB现有设备,以有线射频闭环方式与新研制的目标动态模拟设备闭环,构建船载USB半实物仿真训练系统的设计方案。给出了海上动态环境下空间目标轨迹的仿真生成和动态修正方法。设计了目标动态模拟设备,阐述了动态目标距离、速度、角度模拟的原理和实现技术途径。该系统的实现和应用大大提高了航天测控联调、演练和训练水平。 相似文献
14.
15.
16.
17.
《Mechatronics》2021
A hardware-in-the-loop (HIL) docking simulator is an important validation facility on the ground for space docking. To reproduce the space docking process, the HIL docking simulator needs to solve the simulation distortion problem. In this paper, a force and moment compensation approach is presented to achieve a high-fidelity HIL simulation for a six degree-of-freedom docking simulator. The whole loop in the HIL simulation is thoroughly analyzed, and the sources that lead to the distortion are illustrated. The force and moment compensation method considers the distortion sources from the time lag of the force sensor, the motion lag of the motion simulator and especially the deformation of the simulator mechanical structure. One key step in the force and moment compensation is the stiffness identification of the docking mechanism. The stiffness relationship among the whole system stiffness, the stiffness of the docking mechanism, and the structural stiffness of the simulator, is established. A stiffness identification model is deduced to obtain the stiffness of the docking mechanism from the whole system stiffness by excluding the structural stiffness of the simulator in real-time. The experimental results show the proposed compensation method can achieve a high-fidelity simulation for the docking simulator. 相似文献
18.
19.
Tsuda T. Hattori S. Yatsuboshi R. Yamauchi K. 《Communications, IEEE Transactions on》1979,27(7):1112-1117
A new subscriber communication system and its design philosophy are described. In addition to telephone communication, the system is simultaneously able to offer data communication, still picture communication, etc. The system is composed of a packetized voice/data terminal, a multi-service switching equipment and the digital subscriber loop connecting between them. The system utilizes the existing subscriber line efficiently and is entirely suitable for coming telephone and data public digital network. 64 kbit/s PCM coded voice conversation and 48 kbit/s data communication were achieved simultaneously over 96 kbit/s digital subscriber line which was spanned up to 2 km. 相似文献
20.
煤矿井下防爆型无主机语音通信系统设计 总被引:1,自引:0,他引:1
针对煤矿井下语音通信速率低,带宽小,音质差,噪声大等缺点,设计了一种煤矿井下防爆型低功耗无主机语音通信系统。该系统的语音编解码采用高压缩率算法RALCWI的CMX618,系统控制采用低功耗STM32F103RE控制器,语音的远距离通信采用CAN总线方式。试验结果表明,语音的压缩速率模式2 400 b/s时,音质较好,通信稳定可靠,满足煤矿井下语音通信带宽要求,语音质量,系统稳定与可靠性高的要求,易于在煤矿系统中推广。 相似文献