Use of watershed factors to predict consumer surfactant risk, water quality, and habitat quality in the upper Trinity River, Texas

Surfactants are high production volume chemicals that are used in a wide assortment of “down-the-drain” consumer products. Wastewater treatment plants (WWTPs) generally remove 85 to more than 99% of all surfactants from influents, but residual concentrations are discharged into receiving waters via wastewater treatment plant effluents. The Trinity River that flows through the Dallas-Fort Worth metropolitan area, Texas, is an ideal study site for surfactants due to the high ratio of wastewater treatment plant effluent to river flow (> 95%) during late summer months, providing an interesting scenario for surfactant loading into the environment. The objective of this project was to determine whether surfactant concentrations, expressed as toxic units, in-stream water quality, and aquatic habitat in the upper Trinity River could be predicted based on easily accessible watershed characteristics. Surface water and pore water samples were collected in late summer 2005 at 11 sites on the Trinity River in and around the Dallas-Fort Worth metropolitan area. Effluents of 4 major waste water treatment plants that discharge effluents into the Trinity River were also sampled. General chemistries and individual surfactant concentrations were determined, and total surfactant toxic units were calculated. GIS models of geospatial, anthropogenic factors (e.g., population density) and natural factors (e.g., soil organic matter) were collected and analyzed according to subwatersheds. Multiple regression analyses using the stepwise maximum R² improvement method were performed to develop prediction models of surfactant risk, water quality, and aquatic habitat (dependent variables) using the geospatial parameters (independent variables) that characterized the upper Trinity River watershed. We show that GIS modeling has the potential to be a reliable and inexpensive method of predicting water and habitat quality in the upper Trinity River watershed and perhaps other highly urbanized watersheds in semi-arid regions.     

Occurrence of pharmaceutically active compounds in surface waters of the henares-jarama-tajo river system (madrid, spain) and a potential risk characterization

The Henares-Jarama-Tajo river system is the largest drainage basin in the Province of Madrid, Spain. This area is characterized by the presence of intensive urban and industrial activities influenced by a continental Mediterranean climate with rainfalls presenting substantial fluctuations along the different seasons. This research aimed to monitor seasonal variations in concentrations of 22 pharmaceutically active compounds (PhACs) in this river system and to establish the potential risk of sublethal effects on aquatic organisms. A total of 10 sampling sites were selected along the river system with samples collected in each of the four seasons during a year-round schedule. Most of the PhACs detected were present in sampling sites downstream in the vicinity of the most populated cities (i.e. Madrid, Guadalajara and Alcalá de Henares). Only two PhACs, fluoxetine and paraxantine, were detected in all sites regardless of the season, and showed median (± interquartile range) concentrations of 21.4 (± 31.2) ng L^- 1 and 8.5 (± 5.3) ng L^- 1, respectively. Other PhACs were detected with a frequency > 80% and included, caffeine, diphenylhydantoin, hydrochlorotiazide, ibuprofen, ketoprofen, diclofenac, sulfamethoxazole, atenolol, naproxen, carbamazepine and propanolol. Seasonal variations were observed with the highest concentrations in December and the lowest in September. By combining measured environmental concentrations with toxicity data (either publicly available or obtained experimentally in our laboratory), and by calculating an Maximum Risk Index (MaxRI) that each combination of PhACs should have for non exceeding the risk threshold, a high potential for long-term risk (MaxRI < 10) was estimated for most of the sampling sites and sampling dates. This research allowed the characterization of the potential risk for each of the PhACs to exert sublethal effects on aquatic organisms using acute screening methods, justifying the need for chronic data in order to refine the risk of these compounds to aquatic organisms.     

A rigorous small area modelling-study for the helicobacter pylori epidemiology

This paper presents an investigation into spatial risk differences over small distances for the Helicobacter pylori infection in the city of Leipzig, Germany and two rural districts. A model, using Bayesian inference, was developed that adjusts the risk for individual-specific factors, and for spatial or individual over-dispersion, respectively. Additionally, the model takes into account conditional spatial autocorrelation. We found a significant positive association to the H. pylori infection risk for: “more than three children live in the household” (OR = 2.4, p = 0.001), “more persons live per sq.m than average” (OR = 1.4, p = 0.03), “home situated at main road” (OR = 1.4, p = 0.04) and “using well water” (OR = 2.3, p = 0.05). A protective effect was identified for “travelled to low prevalence region” (OR = 0.4, p < 0.0001) and “born in Germany” (OR = 0.2, p < 0.0001). Three administrative areas with significantly increased spatial risk were identified: one in the rural district and two in the city of Leipzig. The model explained 24.9% of the total deviance. Contrary to expectations, the largest part of deviance of the data was not explained by the identified significant risk factors, but by individual-specific heterogeneities. We conclude that further - so far not discussed - factors influence the risk and the spatial variation of the H.pylori infection. Furthermore, from the results we speculate about a possible impact of long-time air pollution and surface water.     

Ecotoxicological assessment of grey water treatment systems with Daphnia magna and Chironomus riparius

In order to meet environmental quality criteria, grey water was treated in four different ways: 1) aerobic 2) anaerobic + aerobic 3) aerobic + activated carbon 4) aerobic + ozone. Since each treatment has its own specific advantages and disadvantages, the aim of this study was to compare the ecotoxicity of differently treated grey water using Chironomus riparius (96 h test) and Daphnia magna (48 h and 21d test) as test organisms. Grey water exhibited acute toxicity to both test organisms. The aerobic and combined anaerobic + aerobic treatment eliminated mortality in the acute tests, but growth of C. riparius was still affected by these two effluents. Post-treatment by ozone and activated carbon completely removed the acute toxicity from grey water. In the chronic toxicity test the combined anaerobic + aerobic treatment strongly affected D. magna population growth rate (47%), while the aerobic treatment had a small (9%) but significant effect. Hence, aerobic treatment is the best option for biological treatment of grey water, removing most of the toxic effects of grey water. If advanced treatment is required, the treatment with either ozone or GAC were shown to be very effective in complete removal of toxicity from grey water.     

Biochemical stress response in tetradifon exposed Daphnia magna and its relationship to individual growth and reproduction

Environmental risk assessment of chemicals toxicity requires the use of costly and labor-intensive chronic data and short-term tests provide additional information. Energy budget is used by the animals for their growth, reproduction, and metabolism and it is reduced in case of toxic stress. Tetradifon acaricide is frequently used in the European Mediterranean region and it is implicated in aquatic environmental pollution. Previous studies showed that the EC₅₀-24 h of tetradifon on Daphnia magna was 8.92 mg/L. Based on that, D. magna were exposed to sublethal tetradifon concentrations of 0.10, 0.18, 0.22 and 0.44 mg/L for five days in order to investigate their effect on intermediate metabolism. Caloric content was determined as biomarker of tetradifon toxicity. Results were analyzed using one-way analysis of variance (ANOVA) and Duncan's significant difference test was used to find differences between groups (α was set at p = 0.05). Daphnids energy content decreased as tetradifon concentration increased. At 120-h caloric content was depleted > 51% at pesticide concentrations of 0.18 mg/L and higher. In order to determine a possible link between the 5-d test and the 21-d chronic test, animals under short-term test were exposed to the same pesticide concentrations known to cause adverse effects on reproduction, growth and survival. Results from the present study indicated a good correlation between the proposed 5-day test and daphnid energy budget. Comparison between both, caloric content results and the chronic effect values obtained using life-table studies, suggested a good fit between them. These studies can be used as earlier, predictive and useful tests with comparable results to the classic chronic ones. Our results indicate that caution must be done about the use of tetradifon in the aquatic environment.     

Hydrology and water quality of the headwaters of the River Severn: Stream acidity recovery and interactions with plantation forestry under an improving pollution climate

This paper presents new information on the hydrology and water quality of the eroding peatland headwaters of the River Severn in mid-Wales and links it to the impact of plantation conifer forestry further down the catchment.The Upper Hafren is dominated by low-growing peatland vegetation, with an average annual precipitation of around 2650 mm with around 250 mm evaporation. With low catchment permeability, stream response to rainfall is “flashy” with the rising limb to peak stormflow typically under an hour. The water quality is characteristically “dilute”; stormflow is acidic and enriched in aluminium and iron from the acid organic soil inputs. Baseflow is circum-neutral and calcium and bicarbonate bearing due to the inputs of groundwater enriched from weathering of the underlying rocks. Annual cycling is observed for the nutrients reflecting uptake and decomposition processes linked to the vegetation and for arsenic implying seasonal water-logging within the peat soils and underlying glacial drift. Over the decadal scale, sulphate and nitrate concentrations have declined while Gran alkalinity, dissolved organic carbon and iron have increased, indicating a reduction in stream acidification.Within the forested areas the water quality is slightly more concentrated and acidic, transgressing the boundary for acid neutralisation capacity as a threshold for biological damage. Annual sulphate and aluminium concentrations are double those observed in the Upper Hafren, reflecting the influence of forestry and the greater ability of trees to scavenge pollutant inputs from gaseous and mist/cloud-water sources compared to short vegetation. Acidification is decreasing more rapidly in the forest compared to the eroding peatland possibly due to the progressive harvesting of the mature forest reducing the scavenging of acidifying inputs. For the Lower Hafren, long-term average annual precipitation is slightly lower, with lower average altitude, at around 2520 mm and evaporation is around double that of the Upper Hafren.     

Degradation of diclofenac by TiO2 photocatalysis: UV absorbance kinetics and process evaluation through a set of toxicity bioassays

In the present study the degradation kinetics and mineralization of diclofenac (DCF) by the TiO₂ photocatalysis were investigated in terms of UV absorbance and COD measurements for a wide range of initial DCF concentrations (5-80 mg L⁻¹) and photocatalyst loadings (0.2-1.6 g TiO₂ L⁻¹) in a batch reactor system. A set of bioassays (Daphnia magna, Pseudokirchneriella subcapitata and Artemia salina) was performed to evaluate the potential detoxification of DCF. A pseudo-first-order kinetic model was found to fit well most of the experimental data, while at high initial DCF concentrations (40 and 80 mg L⁻¹) and at 1.6 g TiO₂ L⁻¹ photocatalyst loading a second-order kinetic model was found to fit the data better. The toxicity of the treated DCF samples on D. magna and P. subcapitata varied during the oxidation, probably due to the formation of some intermediate products more toxic than DCF. Unicellular freshwater algae was found to be very sensitive to the treated samples as well as the results from D. magna test were consistent to those of algae tests. A. salina was not found to be sensitive under the investigated conditions. Finally, UV absorbance analysis were found to be an useful tool for a fast and easy to perform measurement to get preliminary information on the organic intermediates that are formed during oxidation and also on their disappearance rate.     

Are groundwater nitrate concentrations reaching a turning point in some chalk aquifers?

In past decades, there has been much scientific effort dedicated to the development of models for simulation and prediction of nitrate concentrations in groundwaters, but producing truly predictive models remains a major challenge. A time-series model, based on long-term variations in nitrate fertiliser applications and average rainfall, was calibrated against measured concentrations from five boreholes in the River Frome catchment of Southern England for the period spanning from the mid-1970s to 2003. The model was then used to “blind” predict nitrate concentrations for the period 2003-2008. To our knowledge, this represents the first “blind” test of a model for predicting nitrate concentrations in aquifers. It was found that relatively simple time-series models could explain and predict a significant proportion of the variation in nitrate concentrations in these groundwater abstraction points (R² = 0.6-0.9 and mean absolute prediction errors 4.2-8.0%). The study highlighted some important limitations and uncertainties in this, and other modelling approaches, in particular regarding long-term nitrate fertiliser application data. In three of the five groundwater abstraction points (Hooke, Empool and Eagle Lodge), once seasonal variations were accounted for, there was a recent change in the generally upward historical trend in nitrate concentrations. This may be an early indication of a response to levelling-off (and declining) fertiliser application rates since the 1980s. There was no clear indication of trend change at the Forston and Winterbourne Abbas sites nor in the trend of nitrate concentration in the River Frome itself from 1965 to 2008.     

Timoshenko versus Euler beam theory: Pitfalls of a deterministic approach

The selection criteria for Euler-Bernoulli or Timoshenko beam theories are generally given by means of some deterministic rule involving beam dimensions. The Euler-Bernoulli beam theory is used to model the behavior of flexure-dominated (or “long”) beams. The Timoshenko theory applies for shear-dominated (or “short”) beams. In the mid-length range, both theories should be equivalent, and some agreement between them would be expected. Indeed, it is shown in the paper that, for some mid-length beams, the deterministic displacement responses for the two theories agrees very well. However, the article points out that the behavior of the two beam models is radically different in terms of uncertainty propagation. In the paper, some beam parameters are modeled as parameterized stochastic processes. The two formulations are implemented and solved via a Monte Carlo-Galerkin scheme. It is shown that, for uncertain elasticity modulus, propagation of uncertainty to the displacement response is much larger for Timoshenko beams than for Euler-Bernoulli beams. On the other hand, propagation of the uncertainty for random beam height is much larger for Euler beam displacements. Hence, any reliability or risk analysis becomes completely dependent on the beam theory employed. The authors believe this is not widely acknowledged by the structural safety or stochastic mechanics communities.     

Assessing risk management capability of contractors in subway projects in mainland China

Contractor's risk management capability (RMC) reflects the sophistication of contractor's understanding of risk portfolio and how to manage those risks. This paper aims to develop a RMC assessment model for subway project contractors and to assess the current overall RMC of subway project contractors in mainland China. To achieve the objectives, a questionnaire survey was conducted and data were collected from 58 respondents. The empirical research findings showed that the overall RMC of subway project contractors can be regarded as between “low” and “medium”. In addition, currently in subway projects' area, contactor's risk analysis capability is relatively more mature than other capabilities. However, contractors' risk management attitude is relatively less mature than other capabilities. Assessing the current RMC of subway project contractors can be used to identify the priority or weakest areas needed for improvement.     

GIS for Radioactive Materials Transportation

Abstract: Stimulated by debate surrounding the potential siting of a national repository, critical issues related to transporting high-level radioactive material (HLRM) are emerging. Techniques such as route characterization and risk/impact analysis are being developed or refined to facilitate routing decisions. Key inputs to analysis include demographic data, environmental features, and transportation system characteristics—inputs that are spatial in nature and difficult to manage without appropriate technology. This paper demonstrates the application of geographic information systems (GISs) to HLRM transportation analysis and identifies three transportation risk-analysis methodologies: comparative study, worst-case assessment, and probabilistic risk assessment. While known for its ability to integrate, manage, process, and effectively present large amounts of complex spatial data, the GIS technology potential for HLRM transportation risk analysis has not been fully exploited. This potential is demonstrated here in applications of GIS technology to develop estimates of resident and visitor population and ecologically sensitive areas along transportation corridors. The applicability of GIS technology is also illustrated through a discussion of linking models for risk assessment and examples of effective display of data and results.     

Performance of UV disinfection and the microbial quality of greywater effluent along a reuse system for toilet flushing

This paper examines the microbial quality of treated RBC (Rotating Biological Contactor) and MBR (Membrane Bioreactor) light greywater along a continuous pilot-scale reuse system for toilet flushing, quantifies the efficiency of UV disinfection unit, and evaluates the regrowth potential of selected microorganisms along the system. The UV disinfection unit was found to be very efficient in reducing faecal coliforms and Staphylococcus aureus. On the other hand, its efficiency of inactivation of HPC (Heterotrophic Plate Count) and Pseudomonas aeruginosa was lower. Some regrowth occurred in the reuse system as a result of HPC regrowth which included opportunistic pathogens such as P. aeruginosa. Although the membrane (UF) of the MBR system removed all bacteria from the greywater, bacteria were observed in the reuse system due to “hopping phenomenon.” The microbial quality of the disinfected greywater was found to be equal or even better than the microbial quality of “clean” water in toilet bowls flushed with potable water (and used for excretion). Thus, the added health risk associated with reusing the UV-disinfected greywater for toilet flushing (regarding P. aeruginosa and S. aureus), was found to be insignificant. The UV disinfection unit totally removed (100%) the viral indicator (F-RNA phage, host: E. coli F_amp⁺) injected to the treatment systems simulating transient viral contamination. To conclude, this work contributes to better design of UV disinfection reactors and provides an insight into the long-term behavior of selected microorganisms along on-site greywater reuse systems for toilet flushing.     

Health risk assessment on human exposed to environmental polycyclic aromatic hydrocarbons pollution sources

To assess how the human exposure to environmental carcinogenic polycyclic aromatic hydrocarbons (PAHs) pollution sources generated from industrial, traffic and rural settings, we present a probabilistic risk model, appraised with reported empirical data. A probabilistic risk assessment framework is integrated with the potency equivalence factors (PEFs), age group-specific occupancy probability and the incremental lifetime cancer risk (ILCR) approaches to quantitatively estimate the exposure risk for three age groups of adults, children, and infants. The benzo[a]pyrene equivalents based PAH concentrations in rural, traffic, and industrial areas associated with age group-specific occupancy probability at different environmental settings are used to calculate daily exposure level through inhalation and dermal contact pathways. Risk analysis indicates that the inhalation-ILCR and dermal contact-ILCR values for adults follow a lognormal distribution with geometric mean 1.04x10(-4) and 3.85x10(-5) and geometric standard deviation 2.10 and 2.75, respectively, indicating high potential cancer risk; whereas for the infants the risk values are less than 10(-6), indicating no significant cancer risk. Sensitivity analysis indicates that the input variables of cancer slope factor and daily inhalation exposure level have the greater impact than that of body weight on the inhalation-ILCR; whereas for the dermal-ILCR, particle-bound PAH-to-skin adherence factor and daily dermal exposure level have the significant influence than that of body weight.     

An ex situ evaluation of TBA- and MTBE-baited bio-traps

Aquifer microbial communities can be investigated using Bio-traps^® (“bio-traps”), passive samplers containing Bio-Sep^® beads (“bio-beads”) that are deployed in monitoring wells to be colonized by bacteria delivered via groundwater flow through the well. When bio-beads are “baited” with organic contaminants enriched in ¹³C, stable isotope probing allows assessment of the composition and activity of the microbial community. This study used an ex situ system fed by groundwater continuously extracted from an adjacent monitoring well within an experimentally-created aerobic zone treating a tert-butyl alcohol (TBA) plume. The goal was to evaluate aspects of bio-trap performance that cannot be studied quantitatively in situ. The measured groundwater flow through a bio-trap housing suggests that such traps might typically “sample” about 1.8 L per month. The desorption of TBA or methyl tert-butyl ether (MTBE) bait from bio-traps during a typical deployment duration of 6 weeks was approximately 90% and 45%, respectively, of the total initial bait load, with initially high rate of mass loss that decreased markedly after a few days. The concentration of TBA in groundwater flowing by the TBA-baited bio-beads was estimated to be as high as 3400 mg/L during the first few days, which would be expected to inhibit growth of TBA-degrading microbes. Initial inhibition was also implied for the MTBE-baited bio-trap, but at lower concentrations and for a shorter time. After a few days, concentrations in groundwater flowing through the bio-traps dropped below inhibitory concentrations but remained 4-5 orders of magnitude higher than TBA or MTBE concentrations within the aquifer at the experimental site. Desorption from the bio-beads during ex situ deployment occurred at first as predicted by prior sorption analyses of bio-beads but with apparent hysteresis thereafter, possibly due to mass transfer limitations caused by colonizing microbes. These results suggest that TBA- or MTBE-baited bio-traps could be baited at lower initial total mass loading with no detriment to trapping ability. The bio-traps were able to collect detectable amounts of microbial DNA and thus allow some insight into the sparse microbial community present in the aquifer during remediation of the low concentration plume.     

Risk management in small construction projects in Singapore: Status,barriers and impact

Risk management (RM) should be implemented in construction projects to assure the achievement of project objectives, regardless of project size. This study aims to investigate RM in small projects in Singapore in terms of status, barriers and impact of RM on project performance. To achieve the objectives, a questionnaire survey was conducted and data were collected from 668 projects submitted by 34 companies. The analysis results indicated a relatively low level of RM implementation in small projects, and that “lack of time”, “lack of budget”, “low profit margin”, and “not economical” were prominent barriers. Also, the results reported the positive correlation between RM implementation and improvement in quality, cost and schedule performance of small projects, respectively. The findings of this study can provide an in-depth understanding of RM in small projects in Singapore and make benefits of RM convincing to the participants of small projects.     

In situ aquatic bioassessment of pesticides applied on rice fields using a microalga and daphnids

This study assessed the effects of episodic contamination on a drainage canal adjacent to an area of intensive rice production (Coimbra, Portugal). Four monitoring periods were considered [i) before herbicide application (day -14), ii) at the first application day (day 0), iii) 3 or 5 and iv) 6 days after]. Each one consisted in three complementary evaluation lines: a) physico-chemical analyses, b) whole effluent toxicity (WET) assays with Pseudokirchneriella subcapitata, c) in situ bioassays to assess microalgae (P. subcapitata) growth, and the feeding rate and survival of Daphnia longispina and Daphnia magna. Study sites were located upstream, in a protected wetland (L1), and downstream, in the vicinity of rice fields (L2). Along with the application of agrochemicals, there was a general decrease of the water quality, especially in L2, due to nutrient and herbicide inputs. Herbicide peaks (on days 0, 5 and 6) in L2 water samples were recorded concomitantly or immediately after their application. Regarding the in situ bioassessment, the algae growth decrease from day 0 onwards in L1, whilst in L2 its inhibition was generally coherent with the decline of the water quality. Apparently, WET tests indicated that the limitation of nutrients could be affecting algae growth in L1, however, conclusions should be cautious. The feeding depression of daphnids occurred on days 0 and 5 for D. longispina and only on day 0 for D. magna, while significant reductions on survival were restricted to day 0 for both species. The impairments occurring on day 0 were linked to a potential increased toxicity driven by the ingestion of particle-bound herbicides and suspended particles. The feeding rate of daphnids provided an earlier indication of toxic impairments, though it is prompted the use of complementary endpoints and trophic levels in order to understand the cumulative effects due to various herbicide pulses.     

The use of muscle burden in rabbitfish Siganus oramin for monitoring polycyclic aromatic hydrocarbons and polychlorinated biphenyls in Victoria Harbour, Hong Kong and potential human health risk

Muscle concentrations of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) were determined in rabbitfish Siganus oramin collected from Victoria Harbour and its vicinity, Hong Kong from 2004 to 2007. Spatially, relatively higher levels of ∑PAH (1.05-4.26 μg g^− 1) and ∑PCB (45.1-76.9 ng g^− 1) were determined in the central and western sites inside the harbour. Temporally, upward trend of ∑PAH, accompanied with a proportion shift from high molecular weight to low molecular weight PAHs, was detected during the three-year study period, suggesting a heavier marine traffic in Victoria Harbour and its western region. However, human health risk assessment based on five individual PAHs indicated that PAHs in fish muscles posed minimal health risk through consumption. In contrast, a downward trend of ∑PCB was registered as the open use of PCBs has been banned. Despite this, the level of ∑PCB in fish muscles still posed a health risk on the local people who have a high fish consumption rate. While seasonal influences on ∑PAH/∑PCB accumulation in S. oramin seemed to be negligible, our findings in S. oramin were in line with the established PAH and PCB levels in sediments and/or mussels from the harbour, suggesting S. oramin can be used as a model fish species for monitoring PAHs and PCBs in the region.     

Sensor-steered fire simulation

A sensor-linked modelling tool for live prediction of uncontrolled compartment fires, K-CRISP, has been developed in order to facilitate emergency response via novel systems such as FireGrid. The modelling strategy is an extension of the Monte-Carlo fire model, CRISP, linking simulations to sensor inputs which controls evolution of the parametric space in which new scenarios are generated, thereby representing real-time “learning” about the fire. CRISP itself is based on a zone model representation of the fire, with linked capabilities for egress modelling and failure prediction for structural members, thus providing a major advantage over more detailed approaches in terms of flexibility and practicality, though with the conventional limitations of zone models. Large numbers of scenarios are required, but computational demands are mitigated to some extent by various procedures to limit the parameters which need to be varied. HPC (high performance computing) resources are exploited in “urgent computing” mode. The approach adopted for steering is shown to be effective in directing the evolution of the fire parameters, thereby driving the fire predictions towards the measurements. Moreover, the availability of probabilistic information in the output assists in providing potential end users with an indication of the likelihood of various hazard scenarios. The best forecasts are those for the immediate future, or for relatively simple fires, with progressively less confidence at longer lead times and in more complex scenarios. Given the uncertainties in real fire development the benefits of more detailed model representations may be marginal and the system developed thus far is considered to be an appropriate engineering approach to the problem, providing information of potential benefit in emergency response.     

Factors affecting contractors’ risk attitudes in construction projects: Case study from China

Risk-based decision making (RBDM) is critical in successful construction project management, in which decision makers’ attitudes towards risks play an important role. Most previous studies in construction project risk management have been focusing on the factors contributing to the success of risk management, but little attention was given to factors significantly affecting decision makers’ risk attitudes in construction projects. To improve RBDM, we investigate the critical factors affecting contractors’ risk attitudes in construction projects in China in this research. Literatures reviews, interviews and questionnaires are used for the identification of factors affecting contractors’ risk attitudes. Statistical methods of ranking analysis and factor analysis are also implemented for verification and further analysis. The results show that the most important three factors are: “consequences of decision making”, “engineering experience”, and “completeness of project information”. Results from factor analysis on the identified critical factors reveal that they can be grouped into four categories, namely: (1) knowledge and experience; (2) contractors’ character; (3) personal perception; and (4) economic environment. The significance of this research is that the findings do not only provide decision making support for contractors by deepening their understandings of the factors that affect their risk attitudes, but also serve as a useful reference for further studies under this topic.     

Sorption of VOCs on material surfaces as the deciding factor when choosing a ventilation strategy

The interaction between different ventilation strategies, and the adsorption and desorption of volatile organic compounds on material surfaces in small test chambers, is investigated. In test chamber experiments, nylon carpet was exposed to a mixture of toluene and α-pinene at two different dosing rates. The ventilation strategies were chosen to mimic the conditions in real buildings, i.e. with an air exchange rate of 2 h⁻¹ during the working day (8–17) and a rate of 0.67 h⁻¹ during the remainder of the 24 h. The results show that the sorption behavior has to be included when estimating the concentration variations in a room based on source characteristics and ventilation rates. The software application “EnviSim” was used to model the concentrations in a model room based on the experimental conditions. As the ventilation strategy influences the resulting concentrations, it is recommended that the ventilation system be “turned on” a couple of hours before the start of the working day and “turned down” again soon after the occupants have left the building.