共查询到17条相似文献,搜索用时 156 毫秒
1.
本文研究在平均驻留时间约束下,一类含有执行器故障的切换非线性系统输出反馈自适应模糊事件触发容错控制问题.首先,建立了一个模态依赖的状态观测器估计不可测量状态.利用模糊逻辑系统来逼近未知项.其次,构建自适应模糊容错事件触发控制方案能够节省网络资源和数据传输.然后,通过构造多Lyapunov函数和平均驻留时间法,证明闭环系统所有状态半全局一致最终有界的同时排除了Zeno现象.最后,通过数值仿真验证该方法的有效性. 相似文献
2.
通过设计事件触发状态反馈控制器,研究一类线性切换系统的输出调节问题.相比于时间触发控制,事件触发控制可显著地降低控制任务执行的次数.由于事件触发时刻与切换时刻的相互混合,导致切换系统控制器的设计十分困难.本文通过给出事件触发机制、状态反馈控制器和满足平均驻留时间的切换信号联合设计的方案,得到系统输出调节问题可解的充分条件.非共同坐标变换突破原有各子系统的调节器方程组具有共同解的限制.此外,为了避免Zeno现象,给出相邻事件触发间隔时间存在一个正下界.最后,应用切换RLC电路系统进行仿真验证结论的有效性. 相似文献
3.
4.
当切换系统发生故障时,通常需要依次进行故障诊断和容错控制.为了提高切换系统故障诊断的可靠性和容错控制的及时性,本文提出一种同时故障估计与容错控制方法.针对满足平均驻留时间约束的线性切换系统,首先建立了基于状态观测器的同时故障估计与容错控制器,并将其设计问题转化为了加权H∞性能指标下增广误差系统的多目标求解问题.然后使用平均驻留时间技术和多Lyapunov函数方法设计了故障估计与容错控制器的参数,又通过松弛矩阵方法进一步得到了保守性较低的结果.最后,利用一个例子对本文所提方法进行了仿真,证实了该方法的有效性. 相似文献
5.
本文研究了随机网络攻击下切换信息物理系统的事件触发控制问题.将信息物理系统描述为一种切换线性系统形式.引入事件触发机制来节省系统资源和减轻网络负载,当误差超过给定阈值时传感器中的采样数据才通过通信网络传输到控制器中.考虑在传感器与控制器的通信网络中受到两种不同特征的随机网络攻击.在网络攻击和所设计的事件触发控制器下,建立了切换随机信息物理系统模型.利用模态依赖平均驻留时间方法构建了相应的切换信号.在设计的事件触发控制器和模态依赖平均驻留时间切换信号下实现了系统的均方指数稳定性,并给出了控制器增益.最后,通过实例验证了所得理论结果的有效性. 相似文献
6.
针对网络化系统研究具有模态依赖平均驻留时间(MDADT)和异步的线性切换系统的周期动态事件触发$H_\infty$控制.与已有切换系统事件触发方式不同,周期动态事件触发引入动态事件触发参数,且具有最小的事件触发间隔下界,在降低数据发送数量的同时,能够有效避免奇诺行为;利用MDADT方法和多Lyapunov函数技术,给出闭环系统具有指数稳定和$H_\infty$加权性能的充分条件;在此基础上,针对周期动态事件触发机制中可能存在的异步问题,提出相应的控制器设计准则.最后,通过算例验证所得结果的优越性. 相似文献
7.
研究了基于事件触发的网络化T-S模糊系统容错控制问题.首先针对一类具有随机执行器故障的网络化T-S模糊系统,提出一种有效减少数据传输量的事件触发机制.然后在综合考虑事件触发机制和控制器与T-S系统前件变量的异步的情况下,建立一种能同时描述事件传送策略、执行器失效、网络诱导时延和异步前件变量的新颖模型.利用李亚普诺夫泛函方法,得到保守性较小的闭环T-S系统均方渐近稳定条件和相应的容错控制器设计方法.实例表明了本文所得结果的有效性. 相似文献
8.
本文发展了一种事件触发采样与更新检测机制、故障诊断及调节的集成设计框架.事件触发技术不仅用于传感器端,同时也用于容错控制器端.所设计的故障诊断观测器能够应用基于事件触发的非均匀采样输出同时估计故障和系统状态,基于所获得的状态和估计信息,构造事件触发更新检测器和动态容错控制器,进而借助于增广系统方法来集成设计两个事件触发检测器、故障诊断观测器和容错控制器,以保证故障系统的性能,同时尽可能的降低传感器、控制器、执行器三者之间的信息传输频率.仿真实例验证了所提方法的可行性和优越性. 相似文献
9.
10.
针对一类具有执行器饱和的切换系统,提出一种基于组合非线性反馈控制(CNF)的事件触发控制方法,以达到在保证系统性能的同时减少网络带宽占用的目的.首先,为了降低系统资源成本,构造事件触发机制来判断是否对系统当前状态进行采样,设计组合非线性反馈控制来提高系统的暂态性能;然后,利用多Lyapunov函数方法得到饱和切换系统在驻留时间切换信号下渐近跟踪问题的充分条件,同时证明事件触发最小的时间间隔大于零,从而避免芝诺(Zeno)行为;最后,通过仿真实例验证所提出方法的有效性. 相似文献
11.
刚性机械臂由于其较高的工作精度和重复性、较强的承载能力,已广泛应用于危险或相对单一、重复性高工作场景.但刚性机械臂的结构及运作方式不够灵活,无法适用于不定型、非标准、狭窄空间等生产场景.最近几年,柔性机械臂因其结构柔性、作业空间大、人机交互安全等优点而受到广泛关注,有希望应用于医疗、服务和智能制造等领域.但柔性机械臂结构柔软,运动比较自由,在作业过程中柔性效应不可忽略,这对其高精度控制提出了重大挑战.柔性机械臂控制的核心科学问题之一是建立包含结构柔性特征和动态特性的高精度动力学模型.为此,本文对柔性机械臂运动学建模和动力学建模研究进行了综述.作为动力学建模的基础,本文首先综述了柔性机械臂的运动学建模方法,主要介绍了曲率法、伪刚体运动学(PRB)方法、基于Cosserat杆的运动学建模方法、结构几何分析方法、Denavit Hartenberg(D H)法及坐标法、数据驱动和机器学习方法等.随后,本文详细综述了柔性机械臂的动力学建模方法,主要包括集中参数系统法、假设模态法、有限元法.最后,本文简述了目前柔性机械臂动力学研究的主要内容,并对未来研究做出展望. 相似文献
12.
Observer-based adaptive fuzzy fault-tolerant output feedback control of uncertain nonlinear systems with actuator faults 总被引:1,自引:0,他引:1
Baoyu Huo Shaocheng Tong Yongming Li 《International Journal of Control, Automation and Systems》2012,10(6):1119-1128
This paper develops an adaptive fuzzy control method for accommodating actuator faults in a class of unknown nonlinear systems with unmeasured states. The considered faults are modeled as lock-in-place (stuck at unknown place). With the help of fuzzy logic systems to approximate the unknown nonlinear functions, and K-filters are designed to estimate the unmeasured states. Combining the backstepping technique with the nonlinear fault-tolerant control theory, a novel adaptive fuzzy faults-tolerant control (FTC) approach is constructed. It is proved that the proposed control approach can guarantee that all the signals of the resulting closed-loop system are bounded and the tracking error between the system output and the reference signal converges to a small neighborhood of zero by appropriate choice of the design parameters. Simulation results are provided to show the effectiveness of the control approach. 相似文献
13.
This paper studies the fault-tolerant control problem for a class of discrete-time fuzzy bilinear systems with unmeasurable states. A fuzzy detective observer is designed to detect the faults. Based on the fuzzy detective observer, a fuzzy controller is designed by solving a set of linear matrix inequalities (LMIs) to ensure that the closed-loop system without faults is asymptotically stable. For the discrete-time fuzzy bilinear system with faults, a fuzzy adaptive diagnostic observer is designed to estimate the faults by solving a set of LMIs. Then, a fuzzy faulttolerant controller is designed based on the fuzzy diagnostic observer to ensure that the closed-loop system with faults is asymptotically stable. At last, simulation results are presented to verify the effectiveness of the proposed output feedback fault-tolerant control method. 相似文献
14.
This paper concentrates upon the issue of adaptive fuzzy tracing control for a class of nonstrict-feedback nonlinear systems output with hysteresis via an event-triggered strategy. To handle the difficulty caused by the nonstrict nonlinear systems, the variable separation technique is introduced. The design difficulty of output hysteresis is addressed by employing a hysteresis inverse function and Nussbaum function to compensate unmeasurable state signal. Meanwhile, the fuzzy logic system (FLS) is used to estimate the unknown function at each step of recursion. Moreover, by devising the relative threshold event-triggered mechanism (ETM), the frequency of actuators and controllers can be largely decreased. Thus, the adaptive fuzzy event-triggered tracing control strategy is proposed by combining the barrier Lyapunov function and backstepping technique. With the proposed scheme, it is theoretically demonstrated that all signals in the closed-loop system are bounded, and the tracing errors are driven to a small neighborhood of the origin under the output constraint. Eventually, two examples demonstrate the efficacy of the proposed control strategy. 相似文献
15.
This paper discusses the adaptive fuzzy decentralised fault-tolerant control (FTC) problem for a class of nonlinear large-scale systems in strict-feedback form. The systems under study contain the unknown nonlinearities, unmodelled dynamics, actuator faults and without the direct measurements of state variables. With the help of fuzzy logic systems identifying the unknown functions and a fuzzy adaptive observer is designed to estimate the unmeasured states. By using the backstepping design technique and the dynamic surface control approach and combining with the changing supply function technique, a fuzzy adaptive FTC scheme is developed. The main features of the proposed control approach are that it can guarantee the closed-loop system to be input–to-state practically stable, and also has the robustness to the unmodelled dynamics. Moreover, it can overcome the so-called problem of ‘explosion of complexity’ existing in the previous literature. Finally, simulation studies are provided to illustrate the effectiveness of the proposed approach. 相似文献
16.
本文针对具有执行器故障的一类离散非线性多输入多输出(Multi-input multi-output, MIMO)系统, 提出了一种基于事件触发的自适应评判容错控制方案. 该控制方案包括评价和执行网络. 在评价网络里, 为了缓解现有的非光滑二值效用函数可能引起的执行网络跳变问题, 利用高斯函数构建了一个光滑的效用函数, 并采用评价网络近似最优性能指标函数. 在执行网络里, 通过变量替换将系统状态的将来信息转化成关于系统当前状态的函数, 并结合事件触发机制设计了最优跟踪控制器. 该控制器引入了动态补偿项, 不仅能够抑制执行器故障对系统性能的影响, 而且能够改善系统的控制性能. 稳定性分析表明所有信号最终一致有界且跟踪误差收敛于原点的有界小邻域内. 数值系统和实际系统的仿真结果验证了该方案的有效性. 相似文献
17.
《International journal of systems science》2012,43(14):2673-2686
ABSTRACTThis paper considers the output-feedback fault-tolerant tracking control problem for a class of uncertain nonlinear switched systems with nonlinear faults and strict-feedback form, where the faults which are nonaffine occur on the actuator. As a kind of specialised function approximating tool, fuzzy logic systems (FLSs), are employed to approximate the unknown smooth nonlinear functions. A switched fuzzy observer is designed to address the problem of unmeasurable states, filtered signals are used to address algebraic loop problem and the average dwell time (ADT) method is further utilised to prove the stability of the resulting closed-loop systems under a type of slowly switching signals. Based on the backstepping recursive design technique and Lyapunov function method, an adaptive fuzzy output-feedback control scheme is developed. The developed control method can ensure all the signals are semi-globally uniformly ultimately bounded (SGUUB) and the system output tracks the reference signal tightly even if unknown fault occurs. A simulation carried on an example demonstrates the validity of the obtained control scheme. 相似文献