A mucoadhesive polymer prepared by template polymerization of acrylic acid in the presence of poly(ethylene glycol) macromer

A new mucoadhesive polymer complex was prepared by the template polymerization of acrylic acid with poly(ethylene glycol) macromer (PEGM) as a template polymer. Fourier transform infrared results showed that the poly(acrylic acid) (PAA)/PEGM mucoadhesive polymer complex was formed by hydrogen bonding between the carboxyl groups of PAA and the ether groups of PEGM. The glass‐transition temperature of the PAA/PEGM mucoadhesive polymer complexes was shifted to a lower temperature as the repeating unit ratio of PAA/PEGM in the complex decreased. The dissolution rate of the PAA/PEGM mucoadhesive polymer complex was much slower than that of the PAA/poly(ethylene glycol) (PEG) mucoadhesive polymer complex and was dependent on the pH and molecular weight of PEGM. The mucoadhesive force of the PAA/PEGM mucoadhesive polymer complexes was stronger than that of commercial Carbopol 971P NF and almost the same as that of the PAA/PEG mucoadhesive polymer complex. The PAA/PEGM interpolymer complex seemed to be a better mucoadhesive polymer matrix than the PAA/PEG interpolymer complex. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1904–1910, 2002     

Amphiphilic poly(acrylonitrile‐co‐acrylic acid)/silver nanocomposite additives for the preparation of antibiofouling membranes with improved properties

This work focuses the preparation of polymer‐silver nanocomposite (Ag‐Nc) dense free standing films and nonwoven fabric supported porous ultrafiltration membranes with improved membrane performance and long‐term antibiofouling properties. New polyacrylonitrle‐based Ag‐Ncs, poly(acrylonitrle‐co‐acrylic acid)‐silver (PAN‐co‐PAA‐Ag) containing 35 wt% of PAA and 0.35–0.65 wt% of Ag‐nanoparticles (Nps) were synthesized and used as additives for the fabrication of PAN‐based (PAN/PAN‐co‐PAA‐Ag) Ag‐Nc porous membranes and dense‐free standing films. The Ag‐Nps were homogeneously dispersed into the PAN‐co‐PAA random copolymer matrix. The prepared membranes (PAN/PAN‐co‐PAA‐Ag) showed combination of properties such as excellent antimicrobial activity towards both Gram Negative and Gram Positive bacteria (prevent biofilm formation), improved protein antifouling properties, and enhanced water flux when compared to neat PAN‐based membrane. The antimicrobial properties, hydrophilicity, and the water flux of various membranes follow the following order for the membranes PAN < PAN/PAN‐co‐PAA < PAN/PAN‐co‐PAA‐Ag. Extraneous addition of small amount of polyethylene glycol (PEG) during preparation of additive i.e. [PEG + PAN‐co‐PAA]‐Ag further improved the protein antifouling properties of the PAN‐based membranes (PAN/[PEG+PAN‐co‐PAA‐Ag]). The dispersed Ag‐Nps were stable on the surface of phase inverted membranes for long period of time and PAN/PAN‐co‐PAA‐Ag membranes are therefore suitable for long‐term water treatment under bacterial environment. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Preparation and characterization of amphiphilic block copolymer of polyacrylonitrile‐block‐poly(ethylene oxide)

The synthesis of polyacrylonitrile‐block‐poly(ethylene oxide) (PAN‐b‐PEO) diblock copolymers is conducted by sequential initiation and Ce(IV) redox polymerization using amino‐alcohol as the parent compound. In the first step, amino‐alcohol potassium with a protected amine group initiates the polymerization of ethylene oxide (EO) to yield poly(ethylene oxide) (PEO) with an amine end group (PEO‐NH₂), which is used to synthesize a PAN‐b‐PEO diblock copolymer with Ce(IV) that takes place in the redox initiation system. A PAN‐poly(ethylene glycol)‐PAN (PAN‐PEG‐PAN) triblock copolymer is prepared by the same redox system consisting of ceric ions and PEG in an aqueous medium. The structure of the copolymer is characterized in detail by GPC, IR, ¹H‐NMR, DSC, and X‐ray diffraction. The propagation of the PAN chain is dependent on the molecular weight and concentration of the PEO prepolymer. The crystallization of the PAN and PEO block is discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1753–1759, 2003     

A novel mucoadhesive polymer prepared by template polymerization of acrylic acid in the presence of poly (ethylene glycol)

A new mucoadhesive polymer was prepared by template polymerization of acrylic acid in the presence of poly(ethylene glycol) (PEG). FTIR results indicated that a polymer complex was formed between poly(acrylic acid) (PAA) and PEG through hydrogen bonding. The hydrogen bonding in the PAA/PEG polymer complex was stronger than that in the PAA/PEG blend, and became stronger as the molecular weight of PEG increased. Glass transition temperatures (T_g) of PAA in the PAA/PEG polymer complexes was shifted to a lower temperature than that of PAA in the PAA/PEG blend. However, they tended to become higher as the molecular weight of PEG increased. The dissolution rate of the PAA/PEG polymer complex was much slower than the PAA/PEG blend, and was dependent on pH and molecular weight of the PEG. The mucoadhesive force of the PAA/PEG polymer complexes was stronger than for the PAA/PEG blend or a commercial product, Carbopol 971P NF. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2749–2754, 1999     

Infrared spectroscopy and electrical properties of ternary poly(acrylic acid)–metal–poly(acrylamide) complexes

Fourier transform infrared spectroscopy (FTIR) and electrical measurements were used for the characterization of the interpolymer complexation between poly(acrylic acid) (PAA) and poly(acrylamide) (PAAm) and also the ternary PAA–metal–PAAm complexes. The interpolymer complexes were prepared by adjusting the pH value of the mixture solutions at different PAA weight fractions (W_PAA). The ternary complexes were prepared by mixing metal chloride solutions (such as ErCl₃ and LaCl₃) with different concentrations to PAA–PAAm mixtures and adjusting the pH value for different W_PAA. It was found that the IR spectra of the interpolymer complexes showed absorption bands at shifted positions and of intensities different from those of the parent polymers. Also, the examination of the spectra of the ternary metal–polymer complexes revealed that they depend on the nature, lency, ionic radius, and concentration of the added metal chlorides. Analysis of the electrical results showed that the electrical conductivity of the interpolymer complexes are always lower than those of PAA and PAAm, which was attributed to the decrease in the mobility of the polymer chains as a result of the complexation. Also, the conductivity of the ternary metal complexes showed a dependence on the properties of the additives and were found to decrease with increasing their concentrations. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2699–2705, 2002     

Formation of multilayer poly(acrylic acid)/poly(vinylidene fluoride) composite membranes for pervaporation

Dual‐ and multilayer composite membranes, consisting of poly(acrylic acid) (PAA) and poly(vinylidene fluoride) (PVDF), were synthesized by the plasma‐induced polymerization technique. The dual‐layer membrane had a dense PAA layer grafted onto a microporous PVDF substrate, whereas in the multilayer membranes, the grafted PAA and the PVDF layers were arranged in an alternating sequence (e.g., PAA/PVDF/PAA and PAA/PVDF/PAA/PVDF/PAA). These membranes were used in a pervaporation process to separate ethanol–water solutions. For the dual‐layer membranes, the results indicated that the separation factor increased and the permeation flux decreased with increasing amounts of grafted PAA. For the case of grafting yield < 0.6 mg/cm², the composite membrane demonstrated poor separation. As the grafting yield reached 0.85 mg/cm², a sharp increase of the separation factor was observed. For the multilayer membranes, the pervaporation performances were very good, with high separation factors (on the order of 100) and reasonable permeation fluxes over a wide ethanol concentration range. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2266–2274, 2004     

Oxidative polymerization of N‐vinylcarbazole in polymer matrix

A new class of soluble conductive poly(N‐vinylcarbazole) (PVCz) compounds has been developed by oxidative matrix polymerization of N‐vinylcarbazole (NVCz) by Ce(IV) in the presence of poly(ethylene glycol) (PEG). PEG was found to be a more suitable matrix with which to obtain a stable homogenous ternary complex solution when compared with poly(acrylic acid) (PAA) and poly(vinylpyrrolidone) (PVP). The role of PEG, NVCz and Ce(IV) concentration, order of component addition, the structure of the polymer matrix, molecular weight of polymer and the effect of solvent have been investigated. Obtaining soluble PEG–Ce(III)–PVCz ternary complexes was shown by cyclic voltammetric measurements, and the initial rate of formation NVCz cation radicals as calculated using UV–visible spectrophotometry. Advantageously with these soluble complexes, conductivities could be measured both in solution and in the solid state. © 2001 Society of Chemical Industry     

Water/ethanol pervaporation performance of asymmetric polyelectrolyte complex membrane constructed by the diffusion of poly(acrylic acid) in chitosan membrane

Asymmetric polyelectrolyte complex (PEC) membranes composed of chitosan membrane and absorbed poly(acrylic acid) (PAA) were constructed. Absorption and therefore PEC formation were performed by bringing a chitosan membrane into contact with a PAA aqueous solution. The mean molecular weight (MW) of PAA employed was 5,000, 25,000 or 250,000. Absorption of PAA and asymmetry of PEC membranes were confirmed and evaluated by Fourier transform infrared (FTIR) spectra and electron spectroscopy for chemical analysis (ESCA). The absorption quantity of PAA decreased while the water selectivity of the PEC membrane increased with an increase in the MW of constituent PAA. In a pervaporation experiment, the water selectivity of the membrane was so high that no ethanol was detected by gas chromatography (GC). Such selectivity was attained by just a small quantity of PEC formation at the surface of the chitosan membrane. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 265–271, 2002     

Interpretation of the chain structures of PMMAs, PANs and PAAms obtained by using Ce(IV) and KMnO4 in combination with NTA and DTPA as initiator systems by FTIR spectroscopic analysis

Polyacrylamides (PAAms), polyacrylonitriles (PANs) and poly(methyl methacrylate)s (PMMAs) were synthesized by using Ce(NH₄)₂(NO₃)₆, Ce(SO₄)₂·4H₂O and KMnO₄ in combination with nitrilotriacetic acid (NTA) and diethylenetriamine pentaacetic acid (DTPA), which have strong chelating properties, as redox initiators. Polymerizations were carried out in the aqueous acidic solutions at 25°C and 55°C in the presence of air. The chain structures of the resulting products were studied by Fourier-transform infrared (FTIR) spectroscopic measurements. From the comparison of the spectroscopic results with gravimetric and viscometric data it was concluded that both the differences between the solubility behaviour in aqueous solutions of MMA, AN, AAm and their polymers, and catalyst–activator–monomer combinations were important parameters effecting the polymerization mechanisms, conversions and the structures of the polymers. The FTIR and viscosity results indicated that PAAms obtained in our experimental conditions formed crosslinked structures with sulphated complexes of Ce(III) and MnSO₄ produced by the redox reactions between catalysts (MnO₄⁻ and Ce(IV)), NTA and AAm. Further, it was observed that PAN chains were terminated by hydrated and sulphated complexes of Ce(III) while the termination of PMMA radicals took place by primary radicals because PMMAs were formed by emulsion polymerization kinetics.     

Comparison between the effects of alcohols and diols on polymethyl‐methacrylate and polyacrylamide with positron annihilation lifetime and electric conductivity measurements

Comparison between the effect of alcohols and diols on poly(methylmethacrylate) (PMMA) and polyacrylamide (PAA) was investigated by positron annihilation lifetime (PAL) spectroscopy and electric conductivity measurements. The samples were prepared by adding alcohols, such as ethanol (E), isopropyl alcohol (P), and butyl alcohol (B), and diols, such as ethanediol (E_1,2), isoproponendiol (P_1,2), and butanediol (B_1,2, B_1,3, B_1,4). The o‐Ps lifetime values (τ₃) of PMMA–alcohol or PMMA–diol composites are shorter than the τ₃ value of the virgin PMMA, whereas the τ₃ values of PAA–alcohol or PPA–diol composites fluctuate above and blow the corresponding value of virgin PAA. On the other hand, a significant increased was observed in the o‐Ps intensities (I₃) of both PMMA and PAA composites with added alcohols and diols compared with pure PMMA and PAA. The electric conductivity (σ) also increased for both PMMA and PAA composites with added alcohols and diols compared with the virgin PMMA or PAA polymer. A correlation was found between positron annihilation lifetime parameters and electric conductivity of PAA composites. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 3078–3083, 2003     

Dehydration of light oil by pervaporation using poly(vinyl alcohol)–poly(acrylic acid‐co‐maleic acid) membranes

A new blended membrane was prepared and tested by pervaporation of light oil, a mixture of five alcohols plus water. The blended membrane was synthesized by blending poly(vinyl alcohol) and poly(acrylic acid‐co‐maleic acid) sodium salt in the presence of sulfuric acid to dope the reaction. We tested several membranes in order to choose the adequate composition to have the best permselectivity. The PVA(60)–PAA‐co‐maleic acid(40) membrane was selected as it was found to be highly selective. Sorption experiments were performed using binary and ternary water–alcohol solutions. The influence of temperature and feed composition on the selectivity and flux in pervaporation was investigated for two different binary mixtures (water/ethanol, water/isobutanol) and one ternary system (water/ethanol/isobutanol). This membrane presents good permselective properties, high water flux, and good selectivity and can even be used for high‐water activities The performances of this new membrane were compared to those obtained with the PVA(90)–PAA(10) membrane synthesized recently: The fluxes observed for the water–ethanol separation were of the same order of magnitude but the selectivity was found to be much higher. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1709–1716, 2002     

Conductive fibers based on poly(ethylene terephthalate)–polyaniline composites manufactured by electrochemical polymerization

A novel method of manufacturing composite conductive fibers was developed through electrochemical polymerization with an apparatus consisting of insulating fibers, cotton fabrics as electrolytic solution holders, an electrolytic solution, and planer electrodes. By this method, poly(ethylene terephthalate) (PET) fibers coated with polyaniline (PAN) were prepared readily and yielded PET–PAN composite conductive fibers (PPCFs). The content of PAN in PPCFs increased with an increase in both the aniline concentration in the electrolytic solution and the polymerization voltage, although it did not depend on the load applied to the electrodes. Observations of the PPCF surface by scanning electron microscopy confirmed that the formation processes of PPCFs could be divided into three steps: (1) fine (nanometer‐size) granular PAN was generated from the anode and adsorbed onto the PET fiber surface, (2) the size of the granular PAN increased up to about 90 nm in a short time, and (3) the granular PAN was linked together to form networks. The conductivity of PPCFs increased with an increasing content of PAN networks. The surface resistance of the PPCF fabric was about 3 × 10⁵ Ω/□ at a PAN content of approximately 2 wt %. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1073–1078, 2003     

Anionic ring‐opening polymerization of adipic anhydride initiated by potassium poly(ethylene glycol)ate

Poly(adipic anhydride) (PAA) was prepared by the ring‐opening polymerization of adipic anhydride (AA) initiated by potassium poly(ethylene glycol)ate. The effects of various factors, such as the amount of initiator, concentration of the monomer, reaction time and temperature, and polarity of the solvent on the polymerization were investigated. The crude polymerized product was a mixture of PAA homopolymer and poly(ethylene glycol)–poly(adipic anhydride) block copolymer, as confirmed by ¹H‐NMR and gel permeation chromatography. Chain‐transfer reactions occurred intensively for the AA polymerization in both the nonpolar solvent toluene and the polar solvents CHCl₃ and tetrahydrofuran, which predominantly determined the molecular weight and the monomer conversion for the polymerized product. The lower monomer conversion in toluene was ascribed to a lower livingness for the initiator in the nonpolar solvent when compared with other two, polar solvents. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2194–2201, 2003     

Effect of poly(acrylic acid) end‐group functionality on inhibition of calcium oxalate crystal growth

A number of series of poly(acrylic acids) (PAA) of differing end‐groups and molecular weights prepared using atom transfer radical polymerization were used as inhibitors for the crystallization of calcium oxalate at 23 and 80°C. As measured by turbidimetry and conductivity and as expected from previous reports, all PAA series were most effective for inhibition of crystallization at molecular weights of 1500–4000. However, the extent of inhibition was in general strongly dependent on the hydrophobicity and molecular weight of the end‐group. These results may be explicable in terms of adsorption/desorption of PAA to growth sites on crystallites. The overall effectiveness of the series didn't follow a simple trend with end‐group hydrophobicity, suggesting self‐assembly behavior or a balance between adsorption and desorption rates to crystallite surfaces may be critical in the mechanism of inhibition of calcium oxalate crystallization. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of poly(acrylonitrile)/montmorillonite nanocomposites from surface‐initiated redox polymerization

We have developed a facile method to prepare polyacrylonitrile/montmorillonite (PAN/MMT) nanocomposites using the surface‐initiated redox polymerization of acrylonitrile (AN) in the aqueous phase. The MMT silicate surfaces were first treated with diethanolamine, and the modified MMT (DEA‐MMT) was subsequently used together with the Ce(IV) salt to serve as a redox system. The PAN chains growing on a surface‐tethered DEA expand the interlayer space, and thus lead to intercalated/exfoliated nanocomposites. The nano‐morphology of the prepared nanocomposites depends on the AN/OH molar ratio in feed. An exfoliated PAN/MMT nanocomposite was obtained when the feeding AN/OH molar ratio = 300 was used. The molecular weight of PAN in the nanocomposites prepared by the present method is also dependent on the AN/OH molar ratio in feed and can be up to ca. 160,000 g/mol. The differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA) analyses show that the increasing fraction of exfoliated silicate structures should enhance the contact interface between the silicate and polymer, resulting in the higher glass transition temperature and thermal stability. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of plant gums on thermal polymerization of acrylonitrile

The effect of some plant gums on the polymerization of acrylonitrile (AN) using ceric ammonium nitrate (CAN) as an initiator in the presence of air (containing 21% oxygen) was studied. The induction period and percent conversion were determined. The induction period in the presence of gum was comparatively lower than that under a N₂ atmosphere. The rate of polymerization has a 1.5‐power dependence on the monomer concentration and the rate is sufficiently high at moderate temperature. The rate also increased with an increasing initiator concentration and reaches a maximum value of 93% at 0.72 × 10^?2 mol L^?1 of CAN. The activation energy was found to be 6.4 kcal mol^?1. Both the molecular weight and density of the polyacrylonitrile (PAN) prepared in the presence of gum were higher than those of PAN prepared in the absence of the gum. The PAN produced in the presence of the gum was thermostable than that prepared in its absence. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3596–3600, 2002     

Grafting of poly(acrylic acid) onto cellulosic microfibers and continuous cellulose filaments and characterization

Results from the grafting of poly(acrylic acid) (PAA) onto cellulosic microfibers and continuous cellulose filaments are presented. The grafting of PAA onto cellulosic fibers offers the possibility of developing enhanced ion exchange and fluid absorbency on the fibers. The grafting of PAA was carried out with a two‐step procedure. First, vinyl‐terminated ethoxy silane was deposited on the surface of the fiber. This was followed by a grafting polymerization reaction in aqueous media of acrylic acid with different concentrations of potassium persulfate (KPS), which acted as the initiator. The percentage of grafting increased with increasing KPS concentration and reached a maximum value at a concentration of about 0.4 wt % with respect to the weight of the fiber. The grafted copolymer was characterized by Fourier transform infrared spectroscopy. Strong evidence that the grafting reaction was successful was given by the presence of a band, with a maximum at 1732 cm^?1, that was characteristic of carbonyl group absorption and was not initially present in the cellulosic fibers. The water absorption of the cellulosic microfibers grafted with PAA was three times greater than the water absorption of the nongrafted microfibers. The mechanical properties of continuous cellulose filaments did not change drastically with PAA grafting. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 386–393, 2002     

Novel approach for attapulgite/poly(acrylic acid) (ATP/PAA) nanocomposite microgels as selective adsorbent for Pb(II) Ion

A novel approach was developed for the preparation of the attapulgite/poly(acrylic acid) (ATP/PAA) nanocomposite microgels via the “one-pot” inverse suspension radical polymerization of acrylic acid (AA) with the multi-functionalized attapulgite nanorods (org-ATP) as the sole crosslinker. The parameters of the feeding ratio of the functional attapulgite (org-ATP) nanorods and AA (org-ATP/AA), oil (liquid paraffin)–water ratio, and feeding ratios of dispersing agent (sodium dodecyl benzene sulfonate (SDBS)) and initiator (ammonium persulfate (APS)) were optimized via 4-Variable 3-Level Orthogonal experiments. Under the optimized preparation condition, more than 85% of the monomer AA had been grafted onto the org-ATP nanorods to form the 3-dimensional network of the ATP/PAA nanocomposite microgel. The ATP/PAA nanocomposite microgel exhibited better mechanical stabilities (resistance to pressure and resistance to agitation) and selective adsorption to heavy metal ions, especially to Pb²⁺. The adsorbed Pb²⁺ ion could be completely eluted with HCl solution. The better mechanical stability and regeneration make it potential adsorbent for the heavy metal contaminated water.     

Aqueous polymerization of ethyl acrylate initiated by ceric ion‐reducing agent systems in nitric acid medium

Kinetic study of aqueous polymerization of ethyl acrylate (EA) was carried out at 30 °C in dilute nitric acid medium by employing ammonium ceric nitrate (ACN)–methyl cellosolve (MC) and ACN–ethyl cellosolve (EC) as redox initiator systems. The ceric ion consumption was found to be first order with respect to ceric ion concentration with both initiator systems. The formation of complexes between Ce(IV) and reducing agents (RA) was observed. The order with respect to Ce(IV), reducing agents and monomer was evaluated for aqueous polymerization of EA by Ce(IV)–MC and Ce(IV)–EC redox initiator systems. The overall activation energy, E_overall, for aqueous polymerization of EA was evaluated in the temperature region of 27–40 °C with both initiator systems. A kinetic mechanism for aqueous polymerization of EA initiated by redox initiator systems is presented. © 2001 Society of Chemical Industry     

Synthesis and properties of chitosan‐modified poly(acrylic acid)

Potassium persulfate (K₂S₂O₈) was used to initiate the polymerization of acrylic acid (AA) monomer in a chitosan (CS) solution. Both a poly(acrylic acid) (PAA) homopolymer and a CS‐co‐PAA copolymer were produced. When the amount of AA was increased from 5 to 40 g with 5 g of CS, the total monomer conversion was found to increase from 89 to 98% after 2 h of reaction at 70°C. In addition, the percentage of reacted AA monomer being converted to the CS‐co‐PAA copolymer (copolymerization efficiency) and the weight composition of the PAA portion in the copolymer (copolymer composition) both increased with the amount of AA added. The structures and properties of the synthesized CS‐modified PAA polymers were studied. In Fourier transform infrared spectra, the formation of a polyelectrolyte complex between CS chains and PAA chains could be observed. From the thermograms obtained via differential scanning calorimetry, we found that the presence of rigid CS chains increased the glass‐transition temperature of PAA. Thermogravimetric analysis revealed three stages of degradation of the synthesized CS‐modified PAA polymers. The swelling ratio of the CS‐modified PAA polymers depended on the pH value and had a maximum value in a buffer solution at pH 7. This was due to the changes in the morphological structure with the pH value. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008