Pervaporation separation of water/dimethylformamide mixtures using poly(vinyl alcohol)‐g‐polyacrylamide copolymeric membranes

Grafted copolymeric membranes of poly(vinyl alcohol) with acrylamide (PVA‐g‐AAm) were developed and used in the pervaporation separation of water–dimethylformamide mixtures by varying the amount of water in the feed from 0 to 100%. From these data, the permeation flux, pervaporation separation index, diffusion coefficient, swelling index, and separation selectivity were calculated at 25, 35, and 45°C. The Arrhenius activation parameters for permeation flux ranged between 22 and 63 kJ/mol, while the activation energy for diffusion ranged between 23 and 67 kJ/mol. Separation selectivity was between 15 and 22. The highest permeation flux of 0.459 kg m^?2 h^?1 was obtained for the 93% grafted membrane at 90% of water in the feed mixture. The results are discussed using the principles of the solution–diffusion model. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 273–282, 2002     

Synthesis and characterization of polyacrylamide‐grafted sodium alginate copolymeric membranes and their use in pervaporation separation of water and tetrahydrofuran mixtures

Polyacrylamide‐grafted sodium alginate (PAAm‐g‐Na‐Alg) copolymeric membranes have been prepared, characterized, and used in the pervaporation separation of 10–80 mass % water‐containing tetrahydrofuran mixtures. Totally three membranes were prepared: (1) neat Na‐Alg with 10 mass % of polyethylene glycol (PEG) and 5 mass % of polyvinyl alcohol (PVA), (2) 46 % grafted PAAm‐g‐Na‐Alg membrane containing 10 mass % of PEG and 5 mass % of PVA, and (3) 93 % grafted PAAm‐g‐Na‐Alg membrane containing 10 mass % of PEG and 5 mass % of PVA. Using the transport data, important parameters like permeation flux, selectivity, pervaporation separation index, swelling index, and diffusion coefficient have been calculated at 30°C. Diffusion coefficients were also calculated from sorption gravimetric data of water–tetrahydrofuran mixtures using Fick's equation. Arrhenius activation parameters for the transport processes were calculated for 10 mass % of water in the feed mixture using flux and diffusion data obtained at 30, 35, and 40°C. The separation selectivity of the membranes ranged between 216 and 591. The highest permeation flux of 0.677 kg/m² h was observed for 93% grafted membrane at 80 mass % of water in the feed mixture. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 272–281, 2002     

Polyacrylonitrile‐g‐poly(vinyl alcohol) membranes for the pervaporation separation of dimethyl formamide and water mixtures

Poly(vinyl alcohol) as well as its grafted copolymer membranes with polyacrylonitrile (PAN‐g‐PVA) were prepared and used to separate water and dimethyl formamide mixtures by the pervaporation technique. The three following membranes were prepared: (1) pure PVA; (2) 46% grafted PAN‐g‐PVA; and (3) 93% grafted PAN‐g‐PVA. Pervaporation separation experiments were carried out at 25°C for the feed mixture containing 10 to 90% water. By use of the transport data, permeation flux, separation selectivity, swelling index, and diffusion coefficients have been calculated. By increasing the grafting of the membrane, flux decreased, whereas separation selectivity increased slightly over that of pure PVA membrane. Arrhenius activation parameters for transport processes were calculated for 10 mass % water containing feed mixture by using flux and diffusion data obtained at 25, 35, and 45°C. Transport parameters were discussed in terms of sorption‐diffusion principles. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 4091–4097, 2004     

Permeation and Separation Characteristics of Acetic Acid‐Water Mixtures by Pervaporation through Acrylonitrile and Hydroxy Ethyl Methacrylate Grafted Poly(vinyl alcohol) Membrane

Abstract

In this study, acrylonitrile (AN) and hydroxyl ethyl methacrylate (HEMA) were grafted onto poly(vinyl alcohol) (PVA) using cerium (IV) ammonium nitrate as initiator at 30°C. The graft copolymer was characterized using the Fourier transform infrared spectroscopy (FTIR) and elemental analysis. The grafted PVA membranes (PVA‐g‐AN/HEMA) were prepared by a casting method, and used in the separation of acetic acid‐water mixtures by pervaporation. The effects of the membrane thickness, operating temperature, and feed composition on the permeation rate and separation factor for acetic acid‐water mixtures were studied. Depending on the membrane thickness, the temperature and feed composition PVA‐g‐AN/HEMA membranes gave separation factors 2.26–14.60 and permeation rates of 0.18–2.07 kg/m²h. It was also determined that grafted membranes gave lower permeation rates and greater separation factors than PVA membranes. Diffusion coefficients of acetic acid‐water mixtures were calculated from permeation rate values. The Arrhenius activation parameters were calculated for the 20 wt.% acetic acid content in the feed using the permeation rate and the diffusion data obtained at between 25–50°C.     

Permeation and separation characteristics of acetic acid/water mixtures through poly(vinyl alcohol‐g‐itaconic acid) membranes by pervaporation,evapomeation, and temperature‐difference evapomeation

In this study, itaconic acid (IA) was grafted onto poly(vinyl alcohol) (PVA) with cerium(IV) ammonium nitrate as an initiator at 45°C. The grafted PVA was characterized with Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and differential scanning calorimetry. IA‐grafted PVA membranes were prepared with a casting method, and the permeation and separation characteristics of acetic acid/water mixtures were investigated with pervaporation (PV), evapomeation (EV) and temperature‐difference evapomeation (TDEV) methods. The effects of the feed composition, operating temperature, and temperature of the membrane surroundings on the permeation rate and separation factor for the acetic acid/water mixtures were studied. The permeation rates in EV were lower than those in PV, whereas the separation factors were higher. With the TDEV method, the permeation rates decreased and the separation factors increased as the temperature of the membrane surroundings decreased. The prepared membranes were also tested in PV, EV, and TDEV to separate the various compositions of the acetic acid/water mixtures (20–90 wt % acetic acid) at 40°C. The highest separation factor, 686, was obtained in TDEV with a 90 wt % acetic acid concentration in the feed. The activation energies of permeation in PV and EV were calculated to be 8.5 and 10.2 kcal/mol, respectively, for a 20 wt % acetic acid solution. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2322–2333, 2004     

Sorption,diffusion, and pervaporation separation of water–acetic acid mixtures through the blend membranes of sodium alginate and guar gum‐grafted‐polyacrylamide

Nonporous homogeneous dense membranes were prepared from the blends of sodium alginate (Na–Alg) with guar gum‐grafted polyacrylamide (GG‐g‐PAAm) in the ratios of 3 : 1 and 1 : 1 and these were tested for the pervaporation separation of water–acetic acid mixtures at 30°C. Blend compatibility was studied in solution by measuring the viscosity and the speed of sound. Membranes were crosslinked by glutaraldehyde. The GG‐g‐PAAm polymer and the crosslinked blend membranes were characterized by Fourier transform infrared spectra. High separation selectivity was exhibited by the pure Na–Alg membrane for water–acetic acid (HAc) mixtures containing 20 mass % of water. The permeation flux increased with increasing mass percent of water in the feed as well as with an increase in the amount of GG‐g‐PAAm in the blend, but separation selectivity decreased. Sorption selectivity was higher for the Na–Alg membrane than for the blend membranes, but it decreased with increasing mass percent of GG‐g‐PAAm in the blends. Diffusion selectivity values vary systematically with the blend composition, but not with the amount of water in the feed. Diffusion coefficients of the water–HAc mixtures were calculated from Fick's equation using sorption data and compared with those calculated from flux values obtained in pervaporation experiments. The Arrhenius activation parameters were calculated for the 20 mass % of water in the feed using flux and diffusion data obtained at 30, 40, and 50°C. The diffusion and pervaporation results are explained in terms of solution–diffusion concepts. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 259–272, 2002     

Pervaporation separation of water‐isopropyl alcohol mixtures with blend membranes of sodium alginate and poly(acrylamide)‐grafted guar gum

The blend membranes of sodium alginate (Na‐Alg) and poly(acrylamide)‐grafted guar gum (PAAm‐g‐GG) in the ratios of 3:1 and 1:1 were prepared and studied for the pervaporation separation of water–isopropyl alcohol mixtures over the entire range of mixture composition at 30°C. Membranes prepared from neat Na‐Alg (M‐1) and the 1:1 blend of Na‐Alg and PAAm‐g‐GG (M‐3) showed the highest separation selectivity for 10 mass % water in the feed mixture, whereas membranes prepared with the 3:1 blend ratio of Na‐Alg to PAAm‐g‐GG showed the highest separation selectivity of 20 mass % water in the feed. Selectivity decreased with increasing amount of water in the feed for all the membranes, but these values show an increase with increasing amount of grafted copolymer in the blend mixture. Flux increased with increasing amount of water in the mixture, but the flux values did not change markedly with the PAAm‐g‐GG content in the blend membrane at the lower mass % water. At higher mass % of water, the flux values of the blends increase systematically with increasing amount of PAAm‐g‐GG in the blend polymer. For the 10 mass %‐containing binary mixtures, the pervaporation separation experiments were performed at 30, 40, and 50°C, and the resulting data were used to calculate the Arrhenius activation parameters. These data indicated activated pore‐type diffusion of the permeants in the membranes. Dynamic sorption studies were also performed on up to 40 mass % water–isopropyl alcohol mixtures at 30°C. These results, when analyzed by the empirical equation, indicated Fickian transport in all the cases. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2014–2024, 2002     

Separation of Acetic Acid‐Water Mixtures through Poly(Vinyl Alcohol)/Poly(Acrylic Acid) Alloy Membranes by Using Evapomeation and Temperature Difference Evapomeation Methods

Abstract

Separation of acetic acid‐water mixtures by using evapomeation (EV) method were carried out over the full range of compositions at temperatures varying from 30 to 55°C using poly(vinyl alcohol)/poly(acrylic acid) (PVA/PAA) (75/25) (v/v) alloy membranes. PVA/PAA membranes gave separation factors of 110–5711 and permeation rates of 2.3×10^?4–1.53×10^?1 kg/m²h, depending on the operation temperature and feed mixture composition. The temperature dependence of the permeation in EV was expressed by the Arrhenius type expression and the activation energy was calculated as 9.15 kcal/mol. More efficient EV technique, which is called temperature difference evapomeation method (TDEV) was also applied to PVA/PAA membranes to separate acetic acid‐water mixtures; high permeation rates (1.7×10^?3–3.0×10^?1 kg/m²h) and separation factors (1335–8924) were obtained for each of the studied feed compositions. Azeotropic mixture of acetic acid and water was also separated by TDEV method with a separation factor of 297 and permeation rate of 1.50×10^?1 kg/m²h.     

Separation of Acetic Acid/Water Mixtures by Pervaporation through Poly(Vinyl Alcohol)–Sodium Alginate Blend Membranes

Abstract

Dense pervaporation (PV) membranes were prepared by blending hydrophilic polymers, poly(vinyl alcohol) (PVA), and sodium alginate (SA), which were then crosslinked with glutaraldehyde (GA) for the separation of acetic acid/water mixtures. These membranes (PVA‐SA) were characterized for morphology, intermolecular interactions, thermal stability, and physico‐mechanical properties using XRD, FTIR, TGA and tensile testing respectively. The effect of experimental parameters such as feed composition and permeate pressure on separation performance of the crosslinked membranes was determined. Sorption studies and porosity measurement were carried out to evaluate the extent of interaction and degree of swelling of the polyion membranes, in acetic acid and water as well as in mixtures of acetic acid and water. Further the results were compared with the commercial membrane (Sulzer pervap 2205). The membrane appears to have a good potential for dehydrating 90 wt% acetic acid with a reasonably high selectivity of 21.5 and a substantial water flux of 0.24 kg/m²/h/10 µm. Separation factor was found to improve with decreasing feed water concentration whereas the corresponding flux decreased. Higher permeate pressures caused a reduction in both flux and selectivity.     

Pervaporation separation and swelling measurement of acetic acid-water mixtures using crosslinked PVA membranes

The pervaporation separation and the swelling behavior of acetic acid-water mixtures were investigated at 30, 40, and 50°C using the crosslinked poly(vinyl alcohol) (PVA) membranes with varying the poly(acrylic acid) (PAA) contents and the acetic acid concentration in the feed mixture. Typically, for the pervaporation separation of 90 wt % acetic acid in the feed, the PVA/PAA = 75/25 membrane gives the separation factor of 795 and the flux of 5.6 g/m² h at 30°C, respectively. The swelling degree decreases as the PAA content in the membrane decreases to 20 wt % of PAA due to the increase of the crosslinking portion in the membrane and increases beyond this PAA content. The swelling degrees show fairly high at the operating temperatures and the total range of the liquid mixtures in question. The overall activation energy of permeation was also calculated using an Arrhenius type relationship. From this study, it could be concluded that the diffusion step is dominant over the sorption step. © 1997 John Wiley & Sons, Inc.     

Pervaporative separation of a 1‐methoxy propanol and water mixture

The pervaporative dehydration of ether derivatives of alcohol, such as 1‐methoxy propanol (MP) and water mixtures, was studied with polyimide (PI), cellophane, poly(vinyl alcohol) (PVA), cellulose diacetate (CDA), cellulose triacetate, two separate blends of cellulose acetate and CDA with cellulose acetate propionate, and PVA crosslinked with multifunctional crosslinkers. The effects of different substitution derivatives of cellulosic materials were investigated. Membranes of PVA and citric acid and of PVA and maleic anhydride were studied with respect to the effect of the crosslinker and its loading. Among all the hydrophilic membranes, PI gave the best selectivity but poor flux. Poly(dimethylsiloxane) (PDMS) and linear low‐density polyethylene (LLDPE) membranes were invoked for the selective permeation of comparatively weaker hydrophilic components. PDMS showed acceptable results for MP separation in terms of both flux and selectivity. LLDPE yielded better selectivity but very poor MP flux. All these membranes were stable, and no changes in their properties were observed over the entire range of concentration at 30°C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2194–2210, 2002     

Separation of acid–water mixtures by pervaporation using nanoparticle filled mixed matrix copolymer membranes

BACKGROUND: Low energy and less expensive membrane based separation of acetic acid‐water mixtures would be a better alternative to conventional separation processes. However, suitable acid resistant membranes are still lacking. Thus, the objective of the present study was to develop mixed matrix membrane (MMM) which would allow high flux and water selectivity over a wide range of feed concentrations of acid in water. RESULTS: Three MMMs, namely PANBA0.5, PANBA1.5 and PANBA3 were made by emulsion copolymerization of acrylonitrile (AN) and butyl acrylate (BA) with 5.5:1 comonomer ratio and in situ incorporation of 0.5, 1.5 and 3 wt%, sodium montmorilonite (Na‐MMT) nanofillers, respectively. For a feed concentration of 99.5 wt% of acid in water the membranes show good permeation flux (2.61, 3.19, 3.97 kg m^?2 h^?1 µm^?1, for PANBA0.5, PANBA1.5 and PANBA3 membrane, respectively) and very high separation factors for water (1473, 1370, 1292 for PANBA0.5, PANBA1.5 and PANBA3 membrane, respectively) at 30 °C. Similarly for a dilute acid–water solution, i.e. for 71.6 wt% acid the membrane showed a very high thickness normalize flux (8.67, 9.44, 11.56 kg m^?2 h^?1 µm^?1, for PANBA0.5, PANBA1.5 and PANBA3 membrane, respectively) and good water selectivity (101.7, 95.3, 79 for PANBA0.5, PANBA1.5 and PANBA3 membrane, respectively) at the same feed temperature. The permeation ratio, permeability, diffusion coefficient and activation energy for permeation of the membranes were also estimated. CONCLUSION: Unlike most of the reported membranes, the present MMMs allowed high flux and selectivity over a wide range of feed concentrations. These membranes may also be effective for separating other similar organic‐water mixtures. Copyright © 2012 Society of Chemical Industry     

Synthesis and characterization of hybrid membranes using poly(vinyl alcohol) and tetraethylorthosilicate for the pervaporation separation of water–isopropanol mixtures

Hybrid membranes were prepared using poly(vinyl alcohol) (PVA) and tetraethylorthosilicate (TEOS) via hydrolysis and cocondensation reaction for the pervaporation separation of water‐isopropanol mixtures. The resulting membranes were characterized by Fourier transform infrared spectroscopy, wide‐angle X‐ray diffraction, and differential scanning calorimetry. The glass transition temperature of these membranes varied from 100 to 120°C with increasing TEOS content. Effects of crosslinking density and feed compositions on the pervaporation performances of the membranes were studied. The membrane containing 1.5:1 mass ratio of TEOS to PVA gave the highest separation selectivity of 900 at 30°C for 10 mass % of water in the feed mixture. It was found that the separation selectivity and permeation flux data are strongly dependent on the water composition of the feed and operating temperature. However, the membrane with the highest crosslinking density showed unusual pervaporation properties. The overall activation energy values were calculated using the Arrhenius‐type equation. The activation energy values for the permeation and diffusion varied from 49.18 to 64.96 and 55.13 to 67.31 kJ/mol, respectively. Pervaporation data have also been explained on the basis of thermodynamic quantities. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1304–1315, 2004     

Poly(acrylic acid)–poly(vinyl alcohol) semi- and interpenetrating polymer network pervaporation membranes

A series of poly(acrylic acid) (PAA)–poly(vinyl alcoho) (PVA) semiinterpenetrating (SIPN) and interpenetrating (IPN) polymer network membranes were prepared by crosslinking PVA alone or by crosslinking both PVA and PAA. Glutaraldeyde and ethylene glycol were used as crosslinking agents for the PVA and PAA networks, respectively. The presence of PAA increases the permeability of the membranes while the presence of PVA improves their mechanical and film-forming properties. The mechanical properties of the membranes were investigated via tensile testing. These hydrophilic membranes are permselective to water from ethanol–water mixture and to ethanol from ethanol–benzene mixtures. The IPN membranes were employed for the former mixtures and the SPIN membranes for the latter, because the IPN ones provided too low permeation rates. The permeation rates and seperation factors were determined as functions of the IPN or SIPN composition, feed composition, and temperature. For the azeotropic ethanol–water mixture (95 wt % ethanol), the separation factor and permeation rate at 50°C of the PAA-PVA IPN membrane, containing 50 wt % PAA, were 50 and 260 g/m²h, respectively. For the ethanol–benzene mixture, the PAA–PVA SIPN membranes had separation factors between 1.4 and 1200 and permeation rates between 6 and 550 g/m²h, respectively, depending on the feed composition and temperature. © 1996 John Wiley & Sons, Inc.     

Separation of ethylene glycol–water mixtures with composite poly(vinyl alcohol)–polypropylene membranes

Composite membranes consisting of a crosslinked poly(vinyl alcohol)(PVA) active layer on top of a porous polypropylene (PP) support were prepared with glutaraldehyde as a crosslinking reagent. The degree of crosslinking and the thickness of the active layer were determined with attenuated total reflection–Fourier transform infrared spectroscopy and scanning electron microscopy, respectively. The membranes were used in the pervaporation dehydration of ethylene glycol (EG)–water mixtures. The effects of the crosslinker content and operational conditions, including feed EG concentration and operating temperature, on the permeation flux and selectivity of the PVA–PP composite membranes were investigated. We observed that the dehydration of a 80 wt % EG mixture at temperature of 60°C, a feed flow rate of 1.5 L/min, and a vacuum pressure of 10 mmHg could be effectively performed, and a moderate permeation flux and a high separation factor were obtained, that is, 0.91 kg m⁻² h⁻¹ and 1021, respectively. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Properties of modified poly(vinyl alcohol) membranes prepared by the grafting of new polyelectrolyte copolymers for water–ethanol mixture separation

For the preparation of a water‐selective membrane for the pervaporation separation of an azeotropic solution, a series of grafted copolymers were synthesized by the reaction of poly(vinyl alcohol) (PVA) with poly(sodium salt styrene sulfonic acid‐co‐maleic acid) (PSStSA‐co‐MA). The esterification was performed between the hydroxyl groups of PVA and the carboxylic groups of the copolymer with a heat treatment. PSStSA‐co‐MA was prepared with sodium salt styrene sulfonic acid and maleic anhydride copolymerization in dimethyl sulfoxide with azobisisobutyronitrile as an initiator. The reaction mechanism and resultant structure were confirmed with IR spectra. The effect of the heat‐treatment time on the gel content was investigated. The permeation flux decreased and the separation factor increased as the crosslinking agent content rose. A membrane containing 15 wt % PSStSA‐co‐MA was used for water–ethanol azeotropic solution pervaporation at 30°C, and a flux of 0.43 kg/m² h and a separation factor of 190 were obtained. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2854–2859, 2002     

Pervaporation of Acetaldehyde Aqueous Solution through Zeolite 3A-Polyurethane (PU) Composite Membrane

3A-filled hydrophilic polyurethane (PU) membranes were prepared by incorporating zeolite 3A into PU for pervaporation separation of acetaldehyde and water mixtures (acetaldehyde concentration 2 wt%–20 wt%). The composite membranes were characterized by Fourier transform infrared spectroscopy and X-ray diffraction. The morphology and thermal stability of these membranes were also investigated. The effects of zeolite 3A on the sorption, diffusion, and pervaporation performance were evaluated. The swelling study showed that 3A-PU membrane had higher swelling degree in acetaldehyde aqueous solution than in pure water. And the swelling degree of the composite membrane in acetaldehyde solution increased with the 3A content. The permeation flux and water/acetaldehyde separation factor first increased and then decreased with increasing 3A content. The reason may be that a proper quantity of 3A will enlarge the free volume fraction of PU while excessive 3A lead to its poor dispersion. The highest permeation flux of the composite membrane could reach 223 g · m^?2 · h^?1 and the maximum water/acetaldehyde selectivity achieved 7.5. The calculation of sorption selectivity and diffusion selectivity showed that diffusion played a more important role in this process.     

Pervaporation performance and Transport phenomenon of PVA blend membranes for the separation of THF/water azeotropic mixtures

Summary Dense polymer membranes were made by mixing aqueous solutions of hydrophilic polymers poly(vinyl alcohol) (PVA) and polyethyleneimine (PEI) in different ratios for investigating the separation of Tetrahydrofuran (THF)/water azeotropic mixtures by pervaporation (PV). In order to gain a more detailed picture of the molecular transport phenomenon, we have performed sorption gravimetric experiments at 30 °C to compute diffusion, swelling, sorption and permeability coefficients of PVA/PEI membranes in the presence of THF and water. The membranes were found to have good potential for breaking the azeotrope of THF at 6% concentration of water. An increase in PVA content in the blend caused a reduction in the flux and an increase in selectivity. Among the blends tested in the study, the 5:1 PVA/PEI blend membrane showed the highest separation factor of 181.5, exhibited a flux of 1.28 kg/m²h for THF respectively at azeotropic feed composition.     

Synthesis and characterization of polyacrylamidegrafted sodium alginate membranes for pervaporation separation of water + isopropanol mixtures

Polyacrylamide‐grafted‐sodium alginate copolymers were prepared by persulfate‐induced radical polymerization by using polymer‐to‐monomer ratios of 2 : 1 and 1 : 1. Polymers were characterized by Fourier transform infrared spectroscopy, differential thermal analysis, and viscosity. Membranes were prepared from the polymers, crosslinked with glutaraldehyde, and used in the pervaporation separation of water + isopropanol mixtures at 30°C. Equilibrium swelling experiments were performed for mixtures containing 10 to 80 mass % of water in the feed. Both the grafted copolymer membranes were ruptured while separating 10 mass % of water in the feed mixture. However, beyond 20 mass % of water in the feed mixture, flux increased with increasing grafting ratio, while selectivity decreased. Pervaporation separation experiments were carried out at 30, 40, and 50°C for 20 mass % of water in the feed mixture. By increasing the temperature, flux increased, whereas selectivity decreased. Arrhenius activation parameters for pervaporation and diffusion decreased with increasing grafting ratio of the membranes. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2030–2037, 2004     

Pervaporation separation of water–acetic acid mixtures through NaY zeolite‐incorporated sodium alginate membranes

The pervaporation (PV) separation and swelling behavior of water–acetic acid mixtures were investigated at 30, 40, and 50°C using pure sodium alginate and its zeolite‐incorporated membranes. The effects of zeolite loading and feed composition on the pervaporation performance of the membranes were analyzed. Both the permeation flux and selectivity increased simultaneously with increasing zeolite content in the polymer matrix. This was discussed on the basis of a significant enhancement of hydrophilicity, selective adsorption, and molecular sieving action, including a reduction of pore size of the membrane matrix. The membrane containing 30 mass % of zeolite showed the highest separation selectivity of 42.29 with a flux of 3.80 × 10^?2 kg m^?2 h^?1 at 30°C for 5 mass % of water in the feed. From the temperature dependency of diffusion and permeation data, the Arrhenius activation parameters were estimated. The E_p and E_D values ranged between 72.28 and 78.16, and 70.95 and 77.38 kJ/mol, respectively. The almost equal magnitude obtained in E_p and E_D values signified that both permeation and diffusion contribute equally to the PV process. All the membranes exhibited positive ΔH_s values, suggesting that the heat of sorption is dominated by Henry's mode of sorption. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2101–2109, 2004