Synthesis,characterization, and metal complexation of poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) as polychelatogens in aqueous solution

We carried out the free‐radical copolymerization of N‐phenylmaleimide with acrylic acid and acrylamide with an equimolar feed monomer ratio. We carried out the synthesis of the copolymers in dioxane at 70°C with benzoyl peroxide as the initiator and a total monomer concentration of 2.5M. The copolymer compositions were obtained by elemental analysis and ¹H‐NMR spectroscopy. The hydrophilic polymers were characterized by elemental analysis, Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymers were performed. Hydrophilic poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) were used for the separation of a series of metal ions in the aqueous phase with the liquid‐phase polymer‐based retention method in the heterogeneous phase. The method is based on the retention of inorganic ions by the polymer in conjunction with membrane filtration and subsequent separation of low‐molecular‐mass species from the formed polymer/metal‐ion complex. The polymer could bind several metal ions, such as Cr(III), Co (II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) inorganic ions, in aqueous solution at pH values of 3, 5, and 7. The interaction of the inorganic ions with the hydrophilic polymer was determined as a function of pH and a filtration factor. Hydrophilic polymeric reagents with strong metal‐complexing properties were synthesized and used to separate those complexed from noncomplexed ions in the heterogeneous phase. The polymers exhibited a high retention capability at pH values of 5 and 7. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Water‐soluble copolymers of 1‐vinyl‐2‐pyrrolidone and acrylamide derivatives: synthesis,characterization, and metal binding capability studied by liquid‐phase polymer‐based retention technique

Radical copolymerizations of 1‐vinyl‐2‐pyrrolidone with acrylamide and N,N′‐dimethylacrylamide at different feed ratios were investigated. The copolymers were characterized by Fourier transform infrared spectroscopy, ¹H NMR, and ¹³C NMR spectroscopy. The copolymer composition was determined from the ¹H NMR spectra and found to be statistical. The metal complexation of poly(acrylamide‐co‐1‐vinyl‐2‐pyrrolidone) and poly(N,N′‐dimethylacrylamide‐co‐1‐vinyl‐2‐pyrrolidone) for the metal ions Cu(II), Co(II), Ni(II), Cd(II), Zn(II), Pb(II), Fe(III), and Cr(III) were investigated in an aqueous phase. The liquid‐phase polymer‐based retention method is based on the retention of inorganic ions by soluble polymers in a membrane filtration cell and subsequent separation of low‐molecular compounds from the polymer complex formed. The metal ion interaction with the hydrophilic polymers was determined as a function of the pH and the filtration factor. Poly(N,N‐dimethylacrylamide‐co‐1‐vinyl‐2‐pyrrolidone) showed a higher affinity for the metal ions than poly(acrylamide‐co‐1‐vinyl‐2‐pyrrolidone). According to the interaction pattern obtained, Cr(III) and Cu(II) formed the most stable complexes at pH 7. Pb(II) and Zn(II) were not retained. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 741–750, 1999     

Metal ion interaction of water‐soluble copolymers containing carboxylic acid groups in aqueous phase by membrane filtration technique

This article reports the synthesis of poly(N‐maleoylglycine‐co‐itaconic acid) by radical copolymerization under different feed mole ratios and its properties to remove various metal ions, such as Cu(II), Cr(III), Co(II), Zn(II), Ni(II), Pb(II), Cd(II), and Fe(III), in aqueous phase with the liquid‐phase polymer‐based retention(LPR) technique. The interactions of inorganic ions with the hydrophilic water‐soluble polymer were determined as a function of pH and filtration factor. Metal ion retention was found to strongly depend on the pH. Metal ion retention increased as pH and MG content units in the macromolecular backbone increased. The copolymers were characterized by elemental analysis, FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy. Additionally, intrinsic viscosity, molecular weight, and polydispersity have been determined for the copolymers. Copolymer and polymer–metal complex thermal behavior was studied using differential scanning calorimetry (DSC) and thermogravimetry (TG) techniques under nitrogen atmosphere. The thermal decomposition temperatures (TDT) were influenced by the copolymer composition. The copolymers present lower TDT than the polymer–metal complex with the same copolymer composition. All copolymers present a single T_g, indicating the formation of random copolymers. A slight deviation of the T_g for the copolymers and its complexes can be observed. The copolymer T_g is higher than the T_g value for the polymer–metal complexes. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Investigation of microstructure of the N‐vinyl‐2‐pyrrolidone/methyl methacrylate copolymers by NMR spectroscopy

The copolymers containing N‐vinyl‐2‐pyrrolidone (V) and methyl methacrylate (M) units of different compositions were synthesized by free radical bulk polymerization. The copolymer composition of these copolymers was determined by CHN analysis. The distortionless enhancement by polarization transfer (DEPT) technique was used to resolve the methine, methylene, and methyl resonance signals in the V/M copolymer. Comonomer reactivity ratios were determined by the Kelen–Tudos (KT) and nonlinear least‐square error‐in‐variable (EVM) methods. ¹H–¹³C Heteronuclear shift quantum correlation spectroscopy (HSQC) and ¹H–¹H homonuclear total correlation spectroscopy (TOCSY) spectra were used for the resolution of the proton nuclear magnetic resonance (¹H NMR) spectrum of the V/M copolymers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1328–1336, 2002     

Nonionic water‐soluble polymer: Preparation,characterization, and application of poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) as a polychelatogen

The free‐radical copolymerization of water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) was carried out with a feed monomer ratio of 75:25 mol %, and the total monomer concentration was 2.67M. The synthesis of the copolymer was carried out in dioxane at 70°C with benzoyl peroxide as the initiator. The copolymer composition was obtained with elemental analysis and ¹H‐NMR spectroscopy. The water‐soluble polymer was characterized with elemental analysis, Fourier transform infrared, ¹H‐ and ¹³C‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymer were performed. The thermal behavior of the copolymer and its complexes were investigated with differential scanning calorimetry (DSC) and thermogravimetry techniques under a nitrogen atmosphere. The copolymer showed high thermal stability and a glass transition in the DSC curves. The separation of various metal ions by the water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) reagent in the aqueous phase with liquid‐phase polymer‐based retention was investigated. The method was based on the retention of inorganic ions by this polymer in a membrane filtration cell and subsequent separation of low‐molar‐mass species from the polymer/metal‐ion complex formed. Poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) could bind metal ions such as Cr(III), Co(II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) in aqueous solutions at pHs 3, 5, and 7. The retention percentage for all the metal ions in the polymer was increased at pH 7, at which the maximum retention capacity could be observed. The interaction of inorganic ions with the hydrophilic polymer was determined as a function of the pH and filtration factor. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 178–185, 2006     

Poly(N‐vinylpyrrolidone‐co‐2‐acrylamido‐2‐methylpropanesulfonate sodium): Synthesis,characterization, and its potential application for the removal of metal ions from aqueous solution

In the current study, poly(N‐vinylpyrrolidone‐co‐2‐acrylamido‐2‐methylpropanesulfonate sodium), poly(VP‐co‐AMPS), was prepared and used for the removal of Cu²⁺, Cd²⁺, and Ni²⁺ ions via a polymer‐enhanced ultrafiltration (PEUF) technique. The copolymer was synthesized by radical polymerization in an aqueous medium with a comonomer feed composition of 50:50 mol %. The molecular structure of the copolymer was elucidated by ATR‐FTIR and ¹H NMR spectroscopy, and the average molecular weight was obtained by GPC. The copolymer composition was determined to be 0.42 for VP and 0.58 for AMPS by ¹H NMR spectroscopy. The copolymer and homopolymers exhibited different retention properties for the metal ions. PAMPS exhibited a high retention capacity for all of the metal ions at both pH values studied. PVP exhibited selectivity for nickel ions. Poly(VP‐co‐AMPS) exhibited a lower retention capacity compared to PAMPS. However, for poly(VP‐co‐AMPS), selectivity for nickel ions was observed, and the retention of copper and cadmium ions increased compared to PVP. The homopolymer mixture containing PAMPS and PVP was inefficient for the retention of the studied metal ions. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41272.     

Preparation,characterization, and metal ion retention capacity of Co(II) and Ni(II) from poly(p‐HO‐ and p‐Cl‐phenylmaleimide‐co‐2‐hydroxypropylmethacrylate) using the ultra filtration technique

p‐Chlorophenylmaleimide and p‐hydroxyphenylmaleimide with 2‐hydroxypropyl methacrylate were synthesized by radical polymerization, and the metal ion retention capacity and thermal behavior of the copolymers were evaluated. The copolymers were obtained by solution radical polymerization with a 0.50 : 0.50 feed monomer ratio. The maximum retention capacity (MRC) for the removal of two metal ions, Co(II) and Ni(II) in aqueous phase were determined using the liquid‐phase polymer based retention technique. Inorganic ion interactions with the hydrophilic polymer were determined as a function of pH. The metal ion retention capacity does not depend strongly on the pH. Metal ion retention increased with an increase of pH for a copolymer composition 0.50 : 0.50. At different pH, the MRC of the poly(p‐chlorophenylmaleimide‐co‐2‐hydroxypropylmethacrylate) for Co(II) and Ni(II) ions varied from 44.1 to 48.6 mg/g and from 41.5 mg/g to 46.0 mg/g, respectively; while the MRC of poly(p‐hydroxyphenylmaleimide‐co‐2‐hydroxypropyl methacrylate) for Co(II) and Ni(II) ions varied from 28.4 to 35.6 mg/g and from 27.2 to 30.8 mg/g, respectively. The copolymers and copolymer–metal complexes were characterized by elemental analysis, FT‐IR, ¹H NMR spectroscopy, and thermal behavior. The thermal behavior of the copolymer and polymer–metal complexes were studied using differential scanning calorimetry and thermogravimetry techniques under nitrogen atmosphere. The thermal decomposition temperature and T_g were influenced by the binding‐metal ion on the copolymer. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Random copolymerization of 2,2‐dimethyltri methylene carbonate and ε‐caprolactone using a rare‐earth tris(4‐tert‐butylphenolate)s as a single‐component initiator

Highly random copolymers of 2,2‐dimethyltrimethylene carbonate (DTC) and ε‐caprolactone (CL) were synthesized by single component rare‐earth tris(4‐tert‐butylphenolate)s [Ln(OTBP)₃] for the first time. The influences of reaction conditions on the copolymerization initiated by La(OTBP)₃ have been examined in detail. The monomer reactivity ratios of DTC and CL determined by the Fineman–Ross method are 4.0 for r_DTC and 0.27 for r_CL. The microstructure of the copolymer was determined by the analyses of the diads DTC–DTC, DTC–CL, CL–DTC and CL–CL of the ¹H NMR spectra. The high degree of randomness of the chain structure was further confirmed by the ¹³C NMR spectra and differential scanning calorimetry. The thermal properties of the copolymers as a function of composition are reported. The mechanism investigated by ¹H NMR data indicates that the rare‐earth tris(4‐tert‐butylphenolate)s initiate the ring‐opening copolymerization of DTC and CL with acyl‐oxygen bond cleavages of the monomers. Copyright © 2004 Society of Chemical Industry     

Homogeneous graft copolymerization of chitosan with butyl acrylate by γ‐irradiation via a 6‐O‐maleoyl‐N‐phthaloyl‐chitosan intermediate

The graft copolymerization of butyl acrylate (BA) onto chitosan was tried via a new protection‐graft‐deprotection procedure. About 6‐O‐maleoyl‐N‐phthaloyl‐chitosan was synthesized and characterized by Fourier transform infrared spectra analysis (FT‐IR) and ¹H‐NMR. Because the intermediate 6‐O‐maleoyl‐N‐phthaloyl‐chitosan was soluble in organic solvents, the graft copolymerization was carried out in a homogeneous system. Grafting was initiated by γ‐irradiation. The graft extent was dependent on the irradiation dose and the concentration of BA monomer, and copolymers with grafting above 100% were readily prepared. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 489–493, 2006     

Sequencing of N‐vinyl‐2‐pyrrolidone/glycidyl methacrylate copolymers by one‐dimensional and two‐dimensional nuclear magnetic resonance spectroscopy

Copolymers of N‐vinyl‐2‐pyrrolidone (V) and glycidyl methacrylate (G) monomers of different compositions were prepared by free‐radical solution polymerization. The copolymer composition of these copolymers was determined with ¹H‐NMR spectra. The reactivity ratios calculated from the Kelen–Tudos and nonlinear least‐square error‐in‐variable methods were r_V = 0.03 ± 0.01 and r_G = 5.05 ± 0.84 and r_V = 0.02 and r_G = 4.72, respectively. The triad sequence distribution in terms of V and G centered triads was determined from ¹³C{¹H}‐NMR spectroscopy. The complete spectral assignment of ¹³C{¹H}‐ and ¹H‐NMR spectra was performed with the help of distortionless enhancement by polarization transfer and two‐dimensional ¹³C–¹H heteronuclear single quantum coherence. The ¹H–¹H couplings were explained with total correlation spectroscopy and nuclear Overhauser enhancement spectroscopy spectra. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 50–60, 2002; DOI 10.1002/app.10186     

A water‐developable negative photoresist based on the photocrosslinking of N‐phenylamide groups with reduced environmental impact

A water‐developable negative photoresist based on the photocrosslinking of N‐phenylamide groups was prepared by the copolymerization of 4‐styrenesulfonic acid sodium salts (SSS) with N‐phenylmethacrylamide (copolymer A) or p‐hydroxy‐N‐phenylmethacrylamide (copolymer B), and its properties such as solubility changes, photochemical reaction, and photoresist characteristics were studied. The copolymer containing a relatively higher amount of SSS units was soluble in water. Solubility changes of the copolymers in the various buffer solutions of pH 4 ～ 11 and in water upon irradiation were observed by the measurement of insoluble fraction. The copolymers were soluble in water before irradiation, whereas they became insoluble upon irradiation with the UV light of 254 nm. The photochemical reaction of the copolymer studied by the UV and IR absorption spectroscopies indicated that a photo‐Fries rearrangement was favored for copolymer A, whereas a photocrosslinking reaction was predominate for copolymer B. Resist properties of the copolymers were studied by measurement of the normalized thickness and by development of the micropattern. Negative tone images with a resolution of 1 μm were obtained with these materials that have a sensitivity (D) of ～ 1100 mJ/cm² with an aqueous developing process.© 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1172–1180, 2002     

Non‐catalyst synthesis and in vitro drug release property of poly(5,5‐dimethyl‐1,3‐dioxan‐2‐one)‐block‐methoxy poly(ethylene glycol) copolymers

A series of poly(5,5‐dimethyl‐1,3‐dioxan‐2‐one)‐block‐methoxy poly(ethylene glycol) (PDTC‐b‐mPEG) copolymers were synthesized by the ring‐opening polymerization of 5,5‐dimethyl‐1,3‐dioxan‐2‐one (DTC) in bulk, using methoxy poly(ethylene glycol) (mPEG) as initiator without adding any catalysts. The resulting copolymers were characterized by Fourier transform infrared spectra, ¹H NMR and gel permeation chromatography. The influences of some factors such as the DTC/mPEG molar feed ratio, reaction time and reaction temperature on the copolymerization were investigated. The experimental results showed that mPEG could effectively initiate the ring‐opening polymerization of DTC in the absence of catalyst, and that the copolymerization conditions had a significant effect on the molecular weight of PDTC‐b‐mPEG copolymer. In vitro drug release study demonstrated that the amount of indomethacin released from PDTC‐b‐mPEG copolymer decreased with increase in the DTC content in the copolymer. © 2013 Society of Chemical Industry     

Microstructure analysis of N‐vinyl‐2‐pyrrolidone/vinyl acetate copolymers by NMR spectroscopy

N‐Vinyl‐2‐pyrrolidone (V) and vinyl acetate (A) copolymers of different compositions were synthesized by free radical bulk polymerization. The copolymer composition of these copolymers was determined using quantitative ¹³C{¹H} NMR spectra. The reactivity ratios for these comonomers were determined using the Kelen–Tudos (KT) and non‐linear least‐square error‐in‐variable (EVM) methods. The reactivity ratios calculated from the KT and EVM methods are r_V = 2.86 ± 0.16, r_A = 0.36 ± 0.09 and r_V = 2.56, r_A = 0.33, respectively. ¹H, ¹³C{¹H} and ¹H–¹³C heteronuclear shift correlation spectroscopy (HSQC) and ¹H–¹H homonuclear total correlation spectroscopy (TOCSY) were used for the compositional and configurational assignments of V/A copolymers. The ¹³C distortionless enhancement by polarization transfer (DEPT) technique was used to resolve the methine, methylene and methyl resonance signals in the V/A copolymers. © 2002 Society of Chemical Industry     

Synthesis,characterization and polychelatogenic properties of poly[(2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid)‐co‐(methacrylic acid)]

Poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid), poly(methacrylic acid), and five copolymers of poly[(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐co‐(methacrylic acid)] were synthesized by radical polymerization and obtained in yields >97%. The polymers were characterized by FT‐IR, [¹H]NMR, and [¹³C]NMR and studied by means of the Liquid‐phase Polymer‐based Retention (LPR) technique. The metal ion retention ability of the copolymers for Cu(II), Cd(II), Co(II), Hg(II), Ni(II), Zn(II), Cr(III) and Ag(I) was investigated at different pH values because of their environmental and analytical interest. The retention profiles of the copolymers were compared with those of the corresponding homopolymers and retention of metal ions was found to increase with increasing pH. © 2001 Society of Chemical Industry     

A novel approach for albumin determination in aqueous media by using temperature‐ and pH‐sensitive N‐isopropylacrylamide‐co‐N‐[3‐(dimethylamino)‐propyl]methacrylamide random copolymers

Random copolymers of N‐isopropylacrylamide (NIPA) and N‐[3‐(dimethylamino)propyl]methacrylamide (DMAPM) were synthesized by solution polymerization using azobisizobutyronitrile as the initiator in 1,4‐dioxane at 60°C. NIPA‐co‐DMAPM copolymer exhibited both temperature and pH sensitivity. Thermally reversible phase transitions were observed both in the acidic and the alkaline pH regions for copolymers produced with different DMAPM/NIPA feed ratios. The pH dependency of the lower critical solution temperature (LCST) was stronger for copolymers produced with higher DMAPM feed concentrations. NIPA‐co‐DMAPM random copolymer was also sensitive to the albumin concentration. In the presence of albumin, thermally irreversible phase transitions were observed in slightly acidic and neutral media. However, reversible transitions were obtained in aqueous media containing albumin at basic pH. The phase‐transition temperature of NIPA‐co‐DMAPM copolymer significantly decreased with increasing albumin concentration at both acidic and alkaline pH values. This behavior was explained by albumin binding onto the copolymer chains by means of H‐bond formation between the dimethylamino groups of the copolymer and the carboxyl groups of albumin. For a certain range of albumin concentration, the phase‐transition temperature exhibited a linear decrease with increasing albumin concentration. By utilizing this behavior, a simple albumin assay was developed. The results indicated that NIPA‐co‐DMAPM copolymer could be utilized as a new reagent for the determination of albumin concentration in the aqueous medium. The proposed method was valid for the albumin concentration range of 0–4000 μg/mL. The protein concentrations commonly utilized in biotechnological studies fall in the range of the proposed method. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2060–2071, 2002; DOI 10.1002/app.10503     

Copolymerization of N‐(4‐carboxyphenyl) itaconimide or N‐(4‐carboxyphenyl) itaconamic acid with methyl methacrylate

This paper describes the synthesis and characterization of N‐(4‐carboxyphenyl) itaconamic acid (CPA) and N‐(4‐carboxyphenyl) itaconimide (CPI) obtained by reacting itaconic anhydride with p‐aminobenzoic acid. Structural and thermal characterization of CPA and CPI was done using ¹H‐NMR, FTIR, and differential scanning calorimetry (DSC). Copolymerization of CPA or CPI with methyl methacrylate (MMA) in solution was carried out at 60 °C using azobisisobutyronitrile as an initiator and dimethyl acetamide or THF as solvent. Feed compositions having varying mole fractions of CPA or CPI ranging from 0.05–0.20 or 0.1–0.5 were taken to prepare copolymers. Copolymerizations were terminated at low percentage conversion. Structural characterization of copolymers was done by ¹H‐NMR and elemental analysis. Copolymer composition was determined using percentage nitrogen content. The reactivity ratios were r₁ (MMA) = 0.68 ± 0.06 and r₂ (CPI) = 0.46 ± 0.06. The intrinsic viscosity [η] was determined using an Ubbelohde suspension level viscometer. [η] decreased with increasing mole fraction of N‐(p‐carboxyphenyl) itaconimide or N‐(p‐carboxyphenyl) itaconamic acid in copolymers. Glass transition temperature and thermal stability of the copolymers were determined using DSC and thermogravimetric analysis, respectively. The glass transition temperature (T_g) as determined from DSC scans increased with increasing amounts of CPA or CPI in copolymers. A significant improvement in the char yield was observed upon copolymerization. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1909–1915, 2005     

Phase behavior of temperature‐ and pH‐sensitive poly(acrylic acid‐g‐N‐isopropylacrylamide) in dilute aqueous solution

Several different composition temperature‐ and pH‐sensitive poly(acrylic acid‐g‐N‐isopropylacrylamide) (P(AA‐g‐NIPAM)) graft copolymers were synthesized by free‐radical copolymerization utilizing macromonomer technique. The phase behavior and conformation change of P(AA‐g‐NIPAM) in aqueous solutions were investigated by UV–vis transmittance measurements, fluorescence probe, and fluorescence quenching techniques. The results demonstrate that the P(AA‐g‐NIPAM) copolymers have temperature‐ and pH‐sensitivities, and these different composition graft copolymers have different lower critical solution temperature (LCST) and critical phase transition pH values. The LCST of graft copolymer decreases with increasing PNIPAM content, and the critical phase transition pH value increases with increasing Poly(N‐isopropylacrylamide) (PNIPAM) content. At room temperature (20°C), different composition of P(AA‐g‐NIPAM) graft copolymers in dilute aqueous solutions (0.001 wt %) have a loose conformation, and there is no hydrophobic microdomain formation within researching pH range (pH 3 ～ 10). In addition, for the P(AA‐g‐NIPAM) aqueous solutions, transition from coil to globular is an incomplete reversible process in heating and cooling cycles. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Studies on the microstructure of vinyl/N‐phenylmaleimide copolymers by NMR and their applications

The micro‐ and stereostructures and sequence distribution of methyl methacrylate (MMA)/N‐phenylmaleimide (PMI) and styrene (St)–PMI copolymers were studied in detail with NMR spectroscopy. The MMA–PMI copolymer was in a random sequence distribution and the St–PMI copolymer was alternating in structure. Some micro‐ and stereoinformation of the MMA–PMI copolymers could be obtained from ¹H‐NMR spectra. The average number sequence length obtained from the copolymer triad by ¹³C‐NMR spectra was in agreement with that calculated from the reactivity ratios measured by an elemental analyzer. From the triad fraction of the copolymer measured by ¹³C‐NMR, the copolymer chain of MMA–PMI was proved to be a one‐order Markov chain. More suitable propagation reactions were proposed from the deviation of sequence distribution of the St–PMI copolymer. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2581–2587, 2000     

Temperature‐responsive alginate‐g‐poly(N,N‐diethylacrylamide) copolymer: Synthesis,characterization, and swelling behavior

Temperature‐responsive polymers have recently gained importance due to their applications in drug delivery. Herein, temperature‐responsive graft copolymer (Alg‐g‐PDEAAm) of alginate and N,N‐diethylacrylamide was synthesized by microwave‐assisted copolymerization using potassium persulfate/N,N,N′,N′‐tetramethylethylenediamine initiator system. The reaction conditions for the best grafting (331%) have been optimized by changing microwave irradiation time, temperature, N,N‐diethylacrylamide, and alginate concentrations. The spectroscopic characteristic, thermal properties, and surface morphology of the copolymers were investigated by FTIR, ¹H‐NMR, DSC/TGA, XRD, gel permeation chromatography, and SEM. Furthermore, low critical solution temperatures of Alg‐g‐PDEAAm copolymers were detected by UV spectroscopy. Swelling ratio of graft microspheres was carried out at 25, 32, and 37 °C, and microspheres were found exhibiting temperature‐responsive property. Cytotoxicity test indicated the Alg‐g‐PDEAAm copolymer and its microsphere were biocompatible. Therefore, based on the results the synthesized temperature‐responsive copolymer could be considered as a promising biomaterial. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46688.     

Synthesis and association properties in water solution of random copolymers of 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid and isodecyl methacrylate—potential application as surfactants in micellar‐enhanced ultrafiltration processes

Hydrophobically modified water‐soluble polymers have been prepared by copolymerization of 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) and isodecyl methacrylate (iDMA) in N,N‐dimethylformamide under nitrogen atmosphere, varying the composition feed. Fluorescence spectroscopy was used to further confirm the copolymers self‐aggregate in water. Critical concentration of the self‐aggregate formation (CAC) decreased by increasing the molar fraction of iDMA in the AMPS_co copolymers and varied between 1.20 and 0.04 g/L depending on the degree of hydrophobic modification. Hence, copolymer composition and charge density allowed tuning the pseudomicellar characteristics of these new amphiphilic copolymers. The addition of a salt or a low‐molecular‐weight surfactant was studied. Binding of CTAB to the AMPS_co copolymers leads to a high decrease of CAC, i.e., 0.006 g/L. Effect of the composition in the viscosimetric behavior of the hydrophobically modified copolymers AMPS_co was investigated. The removal of single metal ions, Cu²⁺, and m‐cresol from aqueous solutions by ultrafiltration with the help of the copolymers was investigated. Equilibrium dialysis experiments demonstrate that the formation of hydrophobic microdomains can be used to control the sequestration of foulants, and thus these novel copolymers have potential application as polymeric surfactants in micellar‐enhanced ultrafiltration processes for water purification. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007