Synthesis and chain extension of nitroxide‐terminated styrene–maleimide copolymers

Thermal radical copolymerization of styrene (S) and maleimide (MI) at 125°C in diglyme in the presence of 2,2,6,6‐tetramethylpiperidin‐1‐yloxyl radical (TEMPO) was studied. Mole fractions of maleimide in the feed, F_MI, varied in the range 0.1–0.9. A quasiliving reaction process proceeded yielding copolymers with a low polydispersity (M_w/M_n = 1.17–1.41). The found azeotropic composition, (F_MI)_A = 0.46, did not differ substantially from that (0.5) in the conventional radical S‐MI copolymerization. At a higher conversion or MI content in the feed, deactivation of the copolymer chains occurred. The obtained TEMPO‐terminated S‐MI copolymers readily initiated polymerization of styrene; chain extension of the macroinitiators took place, giving poly(S‐co‐MI)‐block‐poly(S) diblock copolymers. The synthesized copolymers containing S and MI units were characterized by elemental analysis, NMR spectroscopy, size‐exclusion chromatography, and differential scanning calorimetry. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1863–1868, 2004     

Nitroxide‐mediated homopolymerization and copolymerization of 2‐vinylpyridine with styrene

Homopolymerization and copolymerization of 2‐vinylpyridine (2VP) with styrene (S) at 125°C in the presence of 2,2,6,6‐tetramethyl piperidin‐1‐yloxyl (TEMPO) radicals have been studied. The homopolymerization was carried out with 2,2′‐azobis(isobutyronitrile) (AIBN) as a thermal initiator or without AIBN in the initial reaction mixture. In the copolymerization initiated with AIBN, the molar fraction of 2VP in the feed, F_2VP, varied in the range of 0.1–0.9; F_2VP = 0.65 was found to be the azeotropic composition. The linear semilogarithmic time–conversion plots demonstrated a pseudoliving nature of the polymerizations under study. The molecular weight–conversion dependences indicated the participation of side reactions, diminishing the number of TEMPO‐terminated polymer chains. The synthesized homopolymers and copolymers were characterized using size‐exclusion chromatography (SEC), nitrogen analysis, and NMR spectroscopy. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2024–2030, 2001     

Poly(styrene‐co‐N‐butylmaleimide) macroinitiators by controlled autopolymerization and related block copolymers

Autopolymerization of styrene‐N‐butylmaleimide mixtures at 125 or 140°C in the presence of a stable nitroxyl radical [2,2,6,6‐tetramethylpiperidin‐1‐yloxyl (TEMPO)] was found to proceed in a pseudoliving manner. Unimolecular initiators, which were originated by trapping self‐generated radical species with TEMPO, took part in the process. Under the studied experimental conditions, the TEMPO‐controlled autopolymerization with a varying comonomer ratio provided virtually alternating copolymers of narrow molecular weight distributions. The molecular weights of the copolymers increased with conversions. The obtained styrene‐N‐butylmaleimide copolymers containing TEMPO end groups were used to initiate the polymerization of styrene. The polymerization yielded poly(styrene‐co‐N‐butylmaleimide)‐polystyrene block copolymers with various polystyrene chain lengths and narrow molecular weight distributions. The compositions, molecular weights, and molecular weight distributions of the synthesized block copolymers and the initial poly(styrene‐co‐N‐butylmaleimide) precursors were evaluated using nitrogen analysis, gel permeation chromatography, and ¹H‐ and ¹³C‐NMR spectroscopy. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2378–2385, 1999     

Copolymerization and addition of styrene and N‐phenylmaleimide in the presence of nitroxide

The copolymerization and addition reaction of styrene (S) with N‐phenylmaleimide (PMI), either neat or in xylene, have been found to proceed at 125°C in the presence of 2,2,6,6‐tetramethylpiperidin‐1‐yloxy (TEMPO) radicals. TEMPO‐terminated alternating S‐PMI copolymers and comonomer adducts were obtained. The amounts of the low molecular weight compounds increased with the increasing content of PMI in the initial mixture. The reaction suggests formation of monofunctional unimolecular initiators. In the autopolymerization of neat comonomers, a mediating role of TEMPO was observed. The synthesized copolymers containing TEMPO end groups were used as macroinitiators to initiate polymerization of styrene. The molecular weight distributions of resulting poly(styrene‐alt‐N‐phenylmaleimide)‐block‐polystyrene copolymers indicated the presence of both low molecular weight termination products and some copolymer precursor. The copolymers and comonomer adducts were characterized using the nitrogen analysis, size‐exclusion chromatography (SEC), and NMR spectroscopy. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 1093–1099, 2000     

Synthesis of two‐end‐functionalized copolymer of styrene and methyl methacrylate via living radical polymerization

The random copolymers (HO‐P(St‐r‐MMA)‐COOH) of styrene (St) and methyl methacrylate (MMA) with hydroxyl group at one end and carboxyl group at another end were synthesized by nitroxide‐mediated living radical polymerization initiated by 4,4′‐azobis(4‐cyanovaleric acid) (ACVA) and 4‐hydroxyl‐2,2,6,6–tetramethylpiperidineoxyl (TEMPO‐OH). The experimental results have shown that all synthesized copolymers have narrow molecular weight distribution. The conversion of monomers and the molecular weight of copolymer increase with polymerization time. Thus, a copolymerization mechanism containing living radical polymerization is suggested. The use of this method permits the copolymer with two functional chain ends and controllable molecular weight as well as low molecular weight distribution. X‐ray photoelectron spectroscopy result shows that the synthesized copolymers can be tethered on the surface of silicon wafer through the reaction between the hydroxyl end of the copolymer and native oxide layer on the wafer. In addition, an organic/inorganic hybrid surface has achieved by treating copolymer tethered Si‐substrates with SiCl₄ vapor. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3118–3122, 2006     

Synthesis,characterization and properties of functionalized styrene–maleimide copolymers

New functionalized styrene–maleimide copolymers were prepared by free radical copolymerization of styrene (St) and N‐4‐carboxybutylmaleimide (NBMI) in chloroform, using 2,2′‐azobisisobutyronitrile (AIBN) as initiator. Monomer and copolymer characterization was carried out by ¹H‐ and ¹³C‐NMR. Copolymer composition was determined by elemental analysis and Fourier‐transform infrared (FTIR) spectroscopy. The glass transition temperature (from DSC) and the thermogravimetric analysis (TGA) of the copolymers were consistent with the thermal behavior and stability observed for alternating St–maleimide copolymers. St–NBMI copolymers crosslinked with divinylbenzene (DVB) were also synthesized and their cation exchange properties evaluated in order to assess the capacity of the new copolymers to bind metallic ions. Copyright © 2005 Society of Chemical Industry     

Synthesis and characterization of the novel block copolymer poly(ε‐caprolactone)‐b‐poly(4‐vinyl pyridine) by the combination of coordination and controlled free‐radical polymerizations

A novel block copolymer, poly(ε‐caprolactone)‐b‐poly(4‐vinyl pyridine), was synthesized with a bifunctional initiator strategy. Poly(ε‐caprolactone) prepolymer with a 2,2,6,6‐tetramethylpiperidinyloxy (TEMPO) end group (PCL_T) was first obtained by coordination polymerization, which showed a controlled mechanism in the process. By means of ultraviolet spectroscopy and electron spin resonance spectroscopy, the TEMPO moiety was determined to be intact in the polymerization. The copolymers were then obtained by the controlled radical polymerization of 4‐vinyl pyridine in the presence of PCL_T. The desired block copolymers were characterized by gel permeation chromatography, Fourier transform infrared spectroscopy, and NMR spectroscopy in detail. Also, the effects of the molecular weight and concentration of PCL_T on the copolymerization were investigated. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2280–2285, 2004     

Synthesis of polydimethylsiloxane‐block‐polystyrene‐block‐polydimethylsiloxane via polysiloxane‐based macroinitiator in supercritical CO2

Polydimethylsiloxane‐block‐polystyrene‐block‐polydimethylsiloxane (PDMS‐b‐PS‐b‐PDMS) was synthesized by the radical polymerization of styrene using a polydimethylsiloxane‐based macroazoinitiator (PDMS MAI) in supercritical CO₂. PDMS MAI was synthesized by reacting hydroxy‐terminated PDMS and 4,4′‐azobis(4‐cyanopentanoyl chloride) (ACPC) having a thermodegradable azo‐linkage at room temperature. The polymerization of styrene initiated by PDMS MAI was investigated in a batch system using supercritical CO₂ as the reaction medium. PDMS MAI was found to behave as a polyazoinitiator for radical block copolymerization of styrene, but not as a surfactant. The response surface methodology was used to design the experiments. The parameters used were pressure, temperature, PDMS MAI concentration and reaction time. These parameters were investigated at three levels (?1, 0 and 1). The dependent variable was taken as the polymerization yield of styrene. PDMS MAI and PDMS‐b‐PS‐b‐PDMS copolymers obtained were characterized by proton nuclear magnetic resonance and infrared spectroscopy. The number‐ and weight‐average molecular weights of block copolymers were determined by gel permeation chromatography. Copyright © 2004 Society of Chemical Industry     

Binary copolymerization of 4‐methyl‐1,3‐pentadiene with styrene,butadiene and isoprene catalysed by a titanium [OSSO]‐type catalyst

Binary copolymerization of 4‐methyl‐1,3‐pentadiene (4MPD) with styrene, butadiene and isoprene promoted by the titanium complex dichloro{1,4‐dithiabutanediyl‐2,2′‐bis[4,6‐bis(2‐phenyl‐2‐propyl)phenoxy]}titanium activated by methylaluminoxane is reported. All the copolymers are obtained in a wide range of composition and the molecular weight distributions obtained from gel permeation chromatographic analysis of the copolymers are coherent with the materials being copolymeric in nature. The copolymer microstructure was fully elucidated by means of ¹H NMR and ¹³C NMR spectroscopy. Differential scanning calorimetry shows an increase of glass transition temperature (T_g) with the amount of 4MPD in the copolymers with butadiene and isoprene, while in the copolymers with styrene T_g is increased on increasing the amount of styrene. © 2016 Society of Chemical Industry     

Synthesis of hydroxyl‐terminated copolymer of styrene and 4‐vinylpyridine via nitroxide‐mediated living radical polymerization

The random copolymers of styrene (St) and 4‐vinylpyridine (4‐VP) with hydroxyl end group and low polydispersities were synthesized by nitroxide‐mediated living radical polymerization initiated by azobisisobutyronitrile (AIBN) and 4‐hydroxyl‐2,2,6,6–tetramethylpiperidine‐oxyl (TEMPO‐OH). The experimental results have shown that all synthesized copolymers have narrow molecular weight distribution. The conversion of monomers and the molecular weight of copolymer increased with polymerization time. The copolymerization rate is affected by molar ratios of HTEMPO to AIBN. ¹H‐Nuclear magnetic resonance spectra shows that one end of copolymers was capped by TEMPO‐OH moiety. The use of this method permits the copolymer with hydroxyl chain end and controllable molecular weight and molecular weight distribution. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1842–1847, 2004     

Graft copolymerization of methylmethacrylate with N‐substituted maleimide‐styrene copolymer by ATRP

Atom transfer radical polymerization (ATRP) was employed to prepare graft copolymers having poly(MBr)‐alt‐poly(St) copolymer as backbone and poly(methyl methacrylate) (PMMA) as branches to obtain heat resistant graft copolymers. The macroinitiator was prepared by copolymerization of bromine functionalized maleimide (MBr) with styrene (St). The polymerization of MMA was initiated by poly(MBr)‐alt‐poly(St) carrying bromine groups as macroinitiator in the presence of copper bromide (CuBr) and bipyridine (bpy) at 110°C. Both macroinitiator and graft copolymers were characterized by ¹H NMR, GPC, DSC, and TGA. The ATRP graft copolymerization was supported by an increase in the molecular weight (MW) of the graft copolymers as compared to that of the macroinitiator and also by their monomodal MW distribution. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Towards a one‐pot synthesis of a polystyrene–PMMA block copolymer via atom‐transfer radical polymerization

The solution atom‐transfer radical copolymerization of styrene and methyl methacrylate in butyl acetate at 110 °C in the presence of Cu(II) bromide and 2,2′‐bipyride was investigated. Polystyrene was polymerized by atom‐transfer radical polymerization using benzyl bromide as initiator and MMA was then added to the system. Block copolymers were formed when MMA was added at ≤90% styrene conversion. Molecular weight distributions (M_w/M_n) of the block copolymers were ≤1.5. The possibility of end‐capping the polystyrene precursor as a means of improving its initiating efficiency towards MMA was also investigated but did not improve the system. © 2002 Society of Chemical Industry     

Nitroxide‐mediated ‘living’ free radical synthesis of novel rod–coil diblock copolymers with polystyrene and mesogen‐jacketed liquid‐crystal polymer segments

The synthesis of rod–coil diblock copolymers with narrow polydispersity was achieved for the first time by TEMPO‐mediated ‘living’ free radical polymerization of styrene and 2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene. The block architecture of the two diblock copolymers thus prepared, MPCS‐block‐St (5400/2400) and MPCS‐block‐St (10 800/8700), was confirmed by GPC, ¹H and ¹³C NMR and DSC studies. The liquid‐crystalline behaviour of the copolymers was studied by DSC and polarized optical microscope. It was observed that both copolymers showed two distinct glass transitions, corresponding to polystyrene and poly(‐2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene). Above the glass transition temperature of rigid block, liquid‐crystalline phase was formed. The clearing point of the phase is higher than the polymer decomposition temperature. © 2000 Society of Chemical Industry     

Hyperbranched copolymers of p‐(chloromethyl)styrene and N‐cyclohexylmaleimide synthesized by atom transfer radical polymerization

The hyperbranched copolymers were obtained by the atom transfer radical copolymerization of p‐(chloromethyl)styrene (CMS) with N‐cyclohexylmaleimide (NCMI) catalyzed by CuCl/2,2′‐bipyridine (bpy) in cyclohexanone (C₆H₁₀O) or anisole (PhOCH₃) with CMS as the inimer. The influences of several factors, such as temperature, solvent, the concentration of CuCl and bpy, and monomer ratio, on the copolymerization were subsequently investigated. The apparent enthalpy of activation for the overall copolymerization was measured to be 37.2 kJ/mol. The fractional orders obtained in the copolymerization were approximately 0.843 and 0.447 for [CuCl]₀ and [bpy]₀, respectively. The monomer reactivity ratios were evaluated to be r_NCMI = 0.107 and r_CMS = 0.136. The glass transition temperature of the resultant hyperbranched copolymer increases with increasing f_NCMI, which indicates that the heat resistance of the copolymer has been improved by increasing NCMI. The prepared hyperbranched CMS/NCMI copolymers were used as macroinitiators for the solution polymerization of styrene to yield star‐shaped poly(CMS‐co‐NCMI)/polystyrene block copolymers by atom transfer radical polymerization. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1992–1997, 2000     

Thermal analysis of solution copolymers of styrene with N‐phenylmaleimide

Free‐radical–initiated copolymerization of N‐phenylmaleimide (NPMI) with styrene (St) at 110°C in a toluene solution initiated by AIBN was carried out by a semibatch method. The compositions of the copolymers were determined by using an elemental analyzer. The glass‐transition temperatures of the copolymers were measured by differential scanning calorimetry. All the semibatch copolymers show a single glass‐transition temperature that increases markedly with increasing NPMI content in the copolymers. The thermal stabilities of the copolymers were studied by using a programmed thermogravimetric analysis technique. Copolymers show a considerable increase in thermal stability and different degradation reaction mechanisms with increasing content of NPMI. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 417–422, 2002     

Synthesis and characterization of styrene–acrylic ester copolymers

Homopolymers and copolymers of styrene and different acrylic esters (i.e., acrylates) were synthesized by the free‐radical solution polymerization technique. Feed ratios of the monomers styrene and cyclohexyl acrylate/benzyl acrylate were 90 : 10, 75 : 25, 60 : 40, 50 : 50, 40 : 60 and 20 : 80 (v/v) in the synthesis of copolymers. All 6 homopolymerizations of acrylic ester synthesis were carried out in N,N(dimethyl formamide) except for the synthesis of poly(cyclohexyl acrylate) (PCA), where the medium was 1,4‐dioxane. Benzoyl peroxide (BPO) and azobisisobutyronitrile (AIBN) were used as initiators. The polymers synthesized were characterized by FTIR, ¹H‐NMR, ¹³C‐NMR spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and viscosity measurements. The reactivity ratios were determined by the Fineman–Ross method using ¹H‐NMR spectroscopic data. The reactivity ratios (r) for the copolymerization of styrene (r_S) with cyclohexyl acrylate (r_CA) were found to be r_S = 0.930 and r_CA = 0.771, while for the copolymerization of styrene with benzyl acrylate, the ratios were found to be r_S = 0.755 and r_BA = 0.104, respectively. The activation energies of decomposition (E_a) and glass‐transition temperature (T_g) for various homo‐ and copolymers were evaluated using TGA and DSC analysis. The activation parameters of the viscous flow, voluminosity (V_E) and shape factor (ν) were also computed for all systems using viscosity data. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1513–1524, 2001     

Controllable radical copolymerization of styrene and methyl methacrylate using 1,1,2,2‐tetraphenyl‐1,2‐bis(trimethylsilyloxy) ethane as initiator

Copolymerization of styrene (St) and methyl methacrylate (MMA) was carried out using 1,1,2,2‐tetraphenyl‐1,2‐bis (trimethylsilyloxy) ethane (TPSE) as initiator; the copolymerization proceeded via a “living” radical mechanism and the polymer molecular weight (M_w) increased with the conversion and polymerization time. The reactivity ratios for TPSE and azobisisobutyronitrile (AIBN) systems calculated by Finemann–Ross method were r_St = 0.216 ± 0.003, r_MMA= 0.403 ± 0.01 for the former and r_St= 0.52 ± 0.01, r_MMA= 0.46 ± 0.01 for the latter, respectively, and the difference between them and the effect of polymerization conditions on copolymerization are discussed. Thermal analysis proved that the copolymers obtained by TPSE system showed higher sequence regularity than that obtained by the AIBN system, and the sequence regularity increased with the content of styrene in copolymer chain segment. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1474–1482, 2001     

Atom transfer radical polymerization grafting of highly functionalized polystyrene and poly(4‐methylstyrene) macroinitiators with tert‐butyl acrylate

Two monodisperse graft copolymers, poly(4‐methylstyrene)‐graft‐poly(tert‐butyl acrylate) [number‐average molecular weight (M_n) = 37,500, weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 1.12] and polystyrene‐graft‐poly(tert‐butyl acrylate) (M_n = 72,800, M_w/M_n = 1.12), were prepared by the atom transfer radical polymerization of tert‐butyl acrylate catalyzed with Cu(I) halides. As macroinitiators, poly{(4‐methylstyrene)‐co‐[(4‐bromomethyl)styrene]} and poly{styrene‐co‐[4‐(1‐(2‐bromopropionyloxy)ethyl)styrene]}, carrying 40% of the bromoalkyl functionalities along the chain, were used. The dependencies of molecular parameters on monomer conversion fulfilled the criteria for controlled polymerizations. In contrast, the dependencies of monomer conversion versus time were nonideal; possible causes were examined. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2930–2936, 2002     

Study of a new titanium dual initiator for the synthesis of poly(ε‐caprolactone)‐b‐polystyrene block copolymers by the combination of coordination and nitroxide mediated polymerizations

Poly ε‐caprolactone‐polystyrene block‐copolymers (PCL‐b‐PSt) were synthesized using a modified titanium catalyst as the dual initiator. Alcoholysis of Ti(OPr)₄ by 4‐hydroxy 2,2,6,6 tetramethyl piperidinyl‐1‐oxyl (HO‐TEMPO) gave a bifunctional initiator Ti(OTEMPO)₄. Poly ε‐caprolactone prepolymer end‐capped with the nitroxide group was first prepared by ring opening polymerization of ε‐caprolactone with this initiator at high conversion. The nitroxide‐end‐capped structure and molar mass (M_n) of the polymers were demonstrated by typical UV absorption band. This analytical technique indicates a near‐quantitative nitroxide functionality and a M_n in good agreement with size exclusion chromatography (SEC) ones. This polyester prepolymer was used to further initiate the radical polymerization with styrene and reach the block copolymers (PCL‐b‐PSt). All the prepolymers and block copolymers were characterized by SEC and NMR spectroscopy. Additionally, the preparation of star polymers bearing two kinds of arms (PCL and PSt) was envisaged and a preliminary result was given. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Sequencing of N‐vinyl‐2‐pyrrolidone/glycidyl methacrylate copolymers by one‐dimensional and two‐dimensional nuclear magnetic resonance spectroscopy

Copolymers of N‐vinyl‐2‐pyrrolidone (V) and glycidyl methacrylate (G) monomers of different compositions were prepared by free‐radical solution polymerization. The copolymer composition of these copolymers was determined with ¹H‐NMR spectra. The reactivity ratios calculated from the Kelen–Tudos and nonlinear least‐square error‐in‐variable methods were r_V = 0.03 ± 0.01 and r_G = 5.05 ± 0.84 and r_V = 0.02 and r_G = 4.72, respectively. The triad sequence distribution in terms of V and G centered triads was determined from ¹³C{¹H}‐NMR spectroscopy. The complete spectral assignment of ¹³C{¹H}‐ and ¹H‐NMR spectra was performed with the help of distortionless enhancement by polarization transfer and two‐dimensional ¹³C–¹H heteronuclear single quantum coherence. The ¹H–¹H couplings were explained with total correlation spectroscopy and nuclear Overhauser enhancement spectroscopy spectra. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 50–60, 2002; DOI 10.1002/app.10186