Spectroscopic and thermal studies of poly[(N‐vinylimidazole)‐co‐(maleic acid)] hydrogel and its quaternized form

BACKGROUND: In this study, poly[(N‐vinylimidazole)‐co‐(maleic acid)] (poly(VIm/MA)) hydrogels were prepared by γ‐irradiation of ternary mixtures of N‐vinylimidazole–maleic acid–water using a ⁶⁰Co γ‐source. Spectroscopic and thermal analyses of these hydrogels as a function of protonation showed that the results are consistent with the existence of an H‐bridged complex when the imidazole rings are partially protonated. Finally, the efficiency and binding trends of Cu²⁺, Co²⁺, Cd²⁺ and Pb²⁺ ions with both protonated and unprotonated poly(VIm/MA) hydrogels were determined. RESULTS: Gelation of 90% was reached at around 180 kGy dose at the end of irradiation. The poly(VIm/MA) hydrogels synthesized were further protonated in HCl solutions with different concentrations. Hydrogels originally showed 450% volumetric swelling; this ratio reached 1900% after protonation at pH = 5.0. Fourier transform infrared spectral changes in the ⁺N? H stretching region (3200–3600 and 1173 cm^?1) and the ring mode deformation at 915 cm^?1 are consistent with the formation of an H‐bridged complex between the protonated and unprotonated imidazole rings upon partial protonation. Similar changes were obtained from NMR spectra of both the protonated and unprotonated forms of the hydrogels. CONCLUSION: Protonated and unprotonated hydrogels have been used in heavy metal ion adsorption studies for environmental purposes. Adsorption decreased with decreasing pH value due to the protonation of the VIm ring. The adsorption of Me²⁺ ions decreased in the order Cu²⁺ > Co²⁺ > Cd²⁺ > Pb²⁺, which is related to the complexation stability as well as the ionic radius of the metal ions. These results show that P(VIm/MA) hydrogels can be used efficiently to remove heavy metal ions from aqueous solutions. However, the protonated form is a bad choice for heavy metal ion adsorption due to electrostatic repulsion forces; it can nevertheless be assumed to be a good choice for anion adsorption from environmental waste water systems. Copyright © 2007 Society of Chemical Industry     

Removal of phosphate by using copper‐loaded poly(N‐vinylimidazole) hydrogels as polymeric ligand exchanger

Polymeric ligand exchangers (PLE) are generally composed of a crosslinked hosting resin that can firmly hold a transition metal ion which can act as terminal functional groups. In this study, poly(N‐vinylimidazole) (PVIm) hydrogels were synthesized by free radical polymerization/crosslinking of N‐vinylimidazole in aqueous solution. Swelling behavior of PVIm hydrogels was investigated and the gel with minimum amount of crosslinking agent, hence showing maximum swelling was selected as the optimum gel system for further studies. To prepare the corresponding PLE for the removal of phosphate, PVIm hydrogels were loaded with Cu(II) ions. Copper loading capacity of PLE was determined to be 5 mmol of Cu(II)/g of dry gel. For removal of phosphate, adsorption experiments were performed in batch mode at different pH (3–9) and phosphate concentrations. It was found that phosphate adsorption capacity did not change significantly within this pH range. The effect of initial concentration of phosphate on the adsorption behavior of PLE was determined for 10 different phosphate concentrations (0.1–1000 mg/L) at pH 7. NaCl solution was used for regeneration of phosphate adsorbed Cu(II) loaded PVIm hydrogels with 100% regeneration efficiency. The new PLE showed high affinity for phosphate; the highest uptake was found to be 218 mg/g dry PLE from 1000 mg/L phosphate solution. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Swelling behavior of poly(acrylamide‐co‐N‐vinylimidazole) hydrogels under different environment conditions

A series of random copolymers of acrylamide and N‐vinylimidazole, poly(AAm‐co‐NVI), with various compositions were prepared using redox copolymerization. The influence of environmental conditions such as pH, temperature, and ionic strength on the swelling behavior of the copolymeric hydrogels was investigated. The hydrogels exhibited the highest equilibrium swelling in basic medium at high temperature. Equilibrium swelling decreased with rising ionic strength at pH 5.0. As pH increased, equilibrium swelling of the hydrogels increased at pH 11.0 and I = 0.20 M. Swelling kinetics of the hydrogels was found to be non‐Fickian at 25°C. The process tended to be Fickian at higher pH and temperature. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1783–1788, 2005     

Discrimination of the roles of crosslinking density and morphology in the swelling behavior of crosslinked polymers: Poly(N‐vinylimidazole) hydrogels

The degree of swelling (S) of crosslinked polymers depends on several variables whose individual contributions are difficult to be distinguished. The aim of this work is to determine the contributions of the morphology to S, discriminating them from the effect of the crosslinking density. Under usual conditions of synthesis, these two characteristics vary simultaneously but here, several samples of chemically crosslinked poly(N‐vinylimidazole) having the same permanent crosslinking density (determined by DSC) and different porous morphologies (determined by SEM) were prepared. It was thus found that the variation of S with porosity, keeping constant the rest of variables, is strongly solvent dependent. Swelling in methanol is almost constant whereas for ethanol, deionized water, and aqueous HCl solutions, S depends on morphological features in a different way for each medium. It was concluded that S increases with inherent porosity and solvent effects arise from the counterbalance of such increment with the dependence of the polymer‐solvent interaction parameter on the polymer volume fraction. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation of poly(4‐vinylpyrrolidone)‐g‐poly(N‐hydroxyacrylamide) and study of its metal binding properties

Crosslinked poly(N‐vinylpyrrolidone), preirradiated in air with γ rays, was grafted with ethyl acrylate in dioxane and water. A detailed study of grafting was made under various reaction conditions. The graft copolymer was treated with potassium hydroxamate in ethanol. The resulting polymer contained pendant hydroxamic acid groups ( CO NHOH) and was studied for the formation of complexes with Fe(III), Cu(II), and Ni(II). The effect of pH on the metal ion uptake by the polymer was also studied. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 475–483, 2000     

Trace metal ion retention properties of crosslinked poly(4‐vinylpyridine) and poly(acrylic acid)

The crosslinked resins poly(4‐vinylpiridine) (PVPy) and poly(acrylic acid) (PAA) were obtained by radical polymerization. PVPy shows monodentate ligands and PAA at basic pH is basically as acrylate anion, which can contain end‐carboxylates groups or form a bridge acting as mono‐ or bidentate ligands. The retention properties for trace metal ions from saline aqueous solutions and natural seawaters of these two resins were investigated by Batch equilibrium procedure. The metal ions studied were Cu(II), Pb(II), Cd(II), and Ni(II). The following effects were studied: pH, contact time, amount of the adsorbent, temperature, and salinity. The resin PVPy showed a high affinity for Cd(II) and PAA for Cu(II) and Cd(II). The metal ions were determined in the filtrate by atomic absorption spectrometry. By the treatment of the loaded resin with 4M HNO₃, it was possible to remove completely the Cu(II) ions. The retention properties of the resins were studied for trace metal ions present in the natural seawaters. Both resins showed a high affinity for Cd(II) when the natural seawater contained Cu(II) and Cd(II). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2908–2916, 2004     

Removal of Hg(II) from acid aqueous solutions by poly(N‐vinylimidazole) hydrogel

Caption of Hg(II) from acid aqueous solution by immersed poly(N‐vinylimidazole) hydrogel particles was studied as a function of pH, counterion, and cation concentration. Fitting parameters to several sorption isotherms have been determined. Their values depend mostly on pH and less, on temperature and counterion, and suggest a large affinity of imidazole groups in the gel and mercury cations. Practically total removal (94.4%) of Hg(II) is achieved at pH = 2, with 10 g of dry gel per liter of solution, when cation concentration was as large as 15,000 ppm (0.075 M). Polymer protonation decreases about fourfold the cation affinity, supporting competitive protonation‐complexation mechanisms. By its side, metal uptake decreases polymer protonation. Thermal stability of loaded gels decreases with respect to metal free hydrogels. Scanning electron micrographs reveal no changes in the gel morphology upon cation binding, but T_g increases significantly with the Hg(II) content of loaded gels and swelling decreases moderately, indicating the role of the cation as ionic crosslinker. Practically total elution of Hg(II) is achieved with 1 M HNO₃ in consecutive loading‐elution cycles. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1467–1475, 2001     

Structure and thermal degradation of poly(N‐phenyl acrylamide) and poly(N‐phenyl methacrylamide)

Poly(N‐phenyl acrylamide) (PPA) and poly(N‐phenyl methacrylamide) (PPMA) were prepared by using N‐phenyl acrylamide and N‐phenyl methacrylamide as monomer, respectively, in tetrahydrofuran using azobisisobutyronitrile as initiator. FT‐IR, ¹H‐NMR, and GPC were used to characterize their molecular structure. The PPA obtained exhibited higher molecular weight and wider molecular weight distribution than that of PPMA. Their thermal degradation and kinetics were systematically investigated in two atmospheres of nitrogen and air from room temperature to 800°C by thermogravimetric analysis at 10°C/min. Based on the thermal decomposition reactions in nitrogen and air, it is shown that a three‐step degradation process in nitrogen and a four‐step degradation process for two polymers were observed in this investigation. The initial thermal degradation temperature was lower than 190°C. Under two atmospheres, PPA exhibits higher degradation temperature, higher temperature at the maximum weight‐loss rate, faster maximum weight‐loss rates, and larger weight loss for the first‐stage decomposition, as well as higher char yield at 500°C than those of PPMA. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1065–1071, 2003     

Photoemission and conductivity measurement of poly(N‐methyl aniline) and poly(N‐ethyl aniline) films

The studies involve the X‐ray photoelectron spectroscopy (XPS) and conductivity measurements of poly(N‐methyl aniline) and poly(N‐ethyl aniline) films deposited electrochemically at different pH values of −0.96, 2.22, and 3.78 for N‐methyl aniline and 1.10, 2.22, and 3.78 for N‐ethyl aniline. The results obtained reveal significant differences in the film properties of the two matrices as a function of pH of solution. These differences are explained on the basis of the competitive reaction products formed during polymerization in the two matrices along with the differences in the electron‐donating ability of the methyl and ethyl groups present on the nitrogen (N) atom. These results are further supported by the UV–Visible and IR data. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1286–1292, 1999     

Swelling kinetics of poly(N‐vinylimidazole‐co‐sodium styrenesulfonate) hydrogels

Hydrogels of N‐vinylimidazole and sodium styrenesulfonate were synthesized by radical crosslinking copolymerization. Transient swelling measurements in water, at room temperature, reveal an unusual behavior. For some gel compositions, the swelling time dependency is about a δ function: dry hydrogel pellets swell up readily to reach a high degree of swelling and, spontaneously, they deswell to collapse. Such peculiarity was interpreted in terms of several competing events in the swelling mechanism: water diffusion toward the gel, chain disentanglement, sodium–proton interchange through the gel–external bath boundary, approaching of chains to allow interaction of sulfonate groups with neighboring protonated imidazole moieties and diffusion of water outside the gel. The results of cyclic swelling–deswelling following abrupt changes of composition in the external bath, from water to sodium hydroxide solution, support that mechanism. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 191–200, 2002     

Thermal degradation behavior of poly(vinyl chloride) in presence of poly(N‐acryloyl‐N′‐cyanoacetohydrazide)

The thermal degradation behavior of poly (vinyl chloride), PVC, in presence of poly(N‐acryloyl‐N′‐cyanoacetohydrazide), PACAH, has been studied using continuous potentiometric determination of the evolved HCl gas from the degradation process from one hand and by measuring the extent of discoloration of the degraded samples from the other. The efficiency of blending PACAH with dibasic lead carbonate, DBLC, conventional thermal stabilizer has also been investigated. A probable radical mechanism for the effect of PACAH on the thermal stabilization of PVC has been proposed. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Studies on poly(8‐hydroxy‐4‐azoquinolinephenylmethacrylate) and its metal complexes

8‐Hydroxy‐4‐azoquinolinephenylmethacrylate (8H4AQPMA) was prepared and polymerized in ethyl methyl ketone (EMK) at 65°C using benzoyl peroxide as free radical initiator. Poly(8‐hydroxy‐4‐azoquinolinephenylmethacrylate) poly(8H4AQPMA) was characterized by infrared and nuclear magnetic resonance techniques. The molecular weight of the polymer was determined by gel permeation chromatography. Cu(II) and Ni(II) complexes of poly(8H4AQPMA) were prepared. Elemental analysis of polychelates suggests that the metal‐ligand ratio is about 1 : 2. The polychelates were further characterized by infrared spectra, X‐ray diffraction, spectral studies, and magnetic moments. Thermal analyses of the polymer and polychelates were carried out in air. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1516–1522, 2006     

Preparation and adsorption properties of poly(N‐vinylformamide/acrylonitrile) chelating fiber for heavy metal ions

In this article we report a new chelating fiber that was prepared from a hydrolyzate of poly(N‐vinylformamide/acrylonitrile) by a wet‐spinning method. This fiber contains chelating groups, such as amidine groups, amino groups, cyano groups, and amide groups, with high densities. We examined the chelating abilities for several metal ions with this fiber, and present the morphological merit of the fibrous product compared with the globular resin. Based on the research results, it is shown that the fiber has higher binding capacities and better adsorption properties for heavy metal ions than the resin. The pH value of the metal ion solution shows strong influences on the adsorption of the metal ions. The maximum adsorption capacities of the fiber for Cu²⁺, Cr³⁺, Co²⁺, Ni²⁺, and Mn²⁺ are 112.23, 88.11, 141.04, 108.06, and 73.51 mg/g, respectively. In mixed metal ions solution, the fiber adsorbs Cr³⁺, Cu²⁺ and Co²⁺ efficiently. The adsorbed metal ions can be quantitatively eluted by hydrochloric acid. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1378–1386, 2002     

Adsorption of heavy‐metal ions on poly(ethylene imine)‐immobilized poly(methyl methacrylate) microspheres

Poly(methyl methacrylate) (PMMA) microspheres carrying poly(ethylene imine) (PEI) were prepared for the removal of heavy‐metal ions (copper, cadmium, and lead) from aqueous solutions with different amounts of these ions (50–600 mg/L) and different pH values (3.0–7.0). Ester groups in the PMMA structures were converted to imine groups in a reaction with PEI as a metal‐chelating ligand in the presence of NaH. The adsorption of heavy‐metal ions on the unmodified PMMA microspheres was very low [3.6 μmol/g for Cu(II), 4.6 μmol/g for Cd(II), and 4.2 μmol/g for Pb(II)]. PEI immobilization significantly increased the heavy‐metal adsorption [0.224 mmol/g for Cu(II), 0.276 mmol/g for Cd(II), and 0.126 mmol/g for Pb(II)]. The affinity order of adsorption (in moles) was Cd(II) > Cu(II) > Pb(II). The adsorption of heavy‐metal ions increased with increasing pH and reached a plateau value around pH 5.5. Their adsorption behavior was approximately described with the Langmuir equation. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 197–205, 2001     

Crystallization,melting behavior,and wettability of poly(ε‐caprolactone) and poly(ε‐caprolactone)/ poly(N‐vinylpyrrolidone) blends

Both wettability and crystallizability control poly(ε‐caprolactone)'s (PCL) further applications as biomaterial. The wettability is an important property that is governed by both chemical composition and surface structure. In this study, we prepared the PCL/poly(N‐vinylpyrrolidone) (PVP) blends via successive in situ polymerization steps aiming for improving the wettability and decreasing crystallizability of PCL. The isothermal crystallization of PCL/PVP at different PVP concentrations was carried out. The equilibrium melting point (T), crystallization rate, and the melting behavior after isothermal crystallization were investigated using differential scanning calorimetry (DSC). The Avrami equation was used to fit the isothermal crystallization. The DSC results showed that PVP had restraining effect on the crystallizability of PCL, and the crystallization rate of PCL decreased clearly with the increase of PVP content in the blends. The X‐ray diffraction analysis (WAXD) results agreed with that. Water absorptivity and contact angle tests showed that the hydrophilic properties were improved with the increasing content of PVP in blends. The coefficient for the water diffusion into PCL/PVP blends showed to be non‐Fickian in character. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and magnetic properties of novel complexes of poly(N‐2‐thiazolylmethacrylamide) with Nd(III), Pr(III), and Sm(III)

N‐2‐Thiazolylmethacrylamide (NTMA) was polymerized by a radical route to obtain the polymer in good yields. The complexes of PolyNTMA with three rare earth ions Nd(III), Pr(III), and Sm(III) were prepared for the first time. FTIR and ¹H NMR were applied to characterize these materials. The magnetic behavior of PolyNTMA–metal complexes was examined as a function of applied magnetic field at 4 K and as a function of temperature (4–300 K) at an applied magnetic field of 30 kOe. It was found that Pr(III) complex exhibits an antiferromagnetic property, while Nd(III) and Sm(III) complexes exhibit a special magnetic property different from the typical magnet. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1289–1293, 2006     

Drug release from electrospun fibers of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) grafted with poly(N‐vinylpyrrolidone)

Poly(N‐vinylpyrrolidone) (PVP) groups were grafted onto poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) backbone to modify the properties of PHBV and synthesize a new novel biocompatible graft copolymer. Based on these graft copolymers, electrospun fiber mats and commonly cast films were explored as drug delivery vehicles using tetracycline hydrochloride as a model drug. Toward that end, the fibers were electrospun and the films were cast from chloroform solutions containing a small amount of methanol to solubilize the drug. The Brookfield viscosities of the solution were determined to achieve the optimal electrospinning conditions. The vitro release of the tetracycline hydrochloride from these new drug delivery systems was followed by UV–vis spectroscopy. To probe into the factors affected on the release behavior of these drug delivery systems, their water absorbing abilities in phosphate buffer solution were investigated, together with their surface hydrophilicity, porosity and crystallization properties were characterized by water contact angles, capillary flow porometer, DSC, and WAXD, respectively. The morphological changes of these drug delivery vehicles before and after release were also observed with SEM. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Metal ion retention properties of poly(acrylic acid) and poly[N‐3‐(dimethylamino)propyl acrylamide‐co‐acrylic acid]

The crosslinked resins poly(acrylic acid) (PAA) and poly[N‐3‐(dimethylamino)propyl acrylamide‐co‐acrylic acid] [P(NDAPA‐co‐AA)] are obtained by radical polymerization and characterized by FTIR spectroscopy. PAA at basic pH exists basically as an acrylate anion that may contain end carboxylate groups or form bridges acting as mono‐ or bidentate ligands. P(NDAPA‐co‐AA) presents three potential ligand groups in its structure: carboxylic acid, amide, and amine. The trace metal ion retention properties of these two resins is compared by using the batch equilibrium procedure. The metal ions are contained in saline aqueous solutions and are found in natural seawater. The retention of Cu(II), Pb(II), Cd(II), and Ni(II) metal ions is studied under competitive and noncompetitive conditions. The effects on the pH, contact time, amount of adsorbent, temperature, and salinity are investigated. The PAA resin presents a high affinity (>80%) for Cu(II) and Cd(II) ions. The P(NDAPA‐co‐AA) resin shows a high affinity for Pb(II) and Cd(II) ions. With 4M HNO₃ it is possible to completely recover the PAA resin charged with Cu(II) ions and the P(NDAPA‐co‐AA) resin charged with Pb(II) ions. The two resins show a high affinity for Cd(II) ions from the seawater containing Cu(II) and Cd(II) ions. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1385–1394, 2005     

Specific interactions in poly(styrene‐co‐2‐hydroxyethyl acrylate)/poly(styrene‐co‐N,N‐dimethylacrylamide) systems

Amphiphilic copolymers of poly(styrene‐co‐2‐hydroxyethyl acrylate) (SHEA) and poly(styrene‐co‐N, N‐dimethylacrylamide) (SAD) of different compositions were prepared by free radical copolymerization and characterized by different techniques. Depending on the nature of the solvent and the densities of interacting species incorporated within the polystyrene matrices, novel materials as blends or interpolymer complexes with properties different from those of their constituents were elaborated when these copolymers are mixed together. The specific interpolymer interactions of hydrogen bonding type and the phase behavior of the elaborated materials were investigated by differential scanning calorimetry (DSC) and Fourier transform infra red spectroscopy (FTIR). The specific interactions of hydrogen bonding type that occurred within the SHEA and within their blends with the SAD were evidenced by FTIR qualitatively by the appearance of a new band at 1626 cm^?1 and quantitatively using appropriate spectral curve fitting in the carbonyl and amide regions. The variation of the glass transition temperature with the blend composition behaved differently with the densities of interacting species. The thermal degradation behavior of the materials was studied by thermogravimetry. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of graft modification with poly(N‐vinylpyrrolidone) on thermal and mechanical properties of poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)

Poly(N‐vinylpyrrolidone) (PVP) groups were grafted onto poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) backbone to modify the properties of PHBV and synthesize a new novel biocompatible graft copolymer. The effect of graft modification with PVP on the thermal and mechanical properties of PHBV was investigated. The thermal stability of grafted PHBV was remarkably improved while the melting temperature (T_m) was almost not affected by graft modification. The isothermal crystallization behavior of samples was observed by polarized optical microscopy and the results showed that the spherulitic radial growth rates (G) of grafted PHBV at the same crystallization temperature (T_c) decreased with increasing graft yield (graft%) of samples. Analysis of isothermal crystallization kinetics showed that both the surface free energy (σ_e) and the work of chain‐folding per molecular fold (q) of grafted PHBV increased with increasing graft%, implying that the chains of grafted PHBV are less flexible than ungrafted PHBV. This conclusion was in agreement with the mechanical testing results. The Young's modulus of grafted PHBV increased while the elongation decreased with increasing graft%. The hydrophilicity of polymer films was also investigated by the water contact angle measurement and the results revealed that the hydrophilicity of grafted PHBV was enhanced. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008