An Area-Efficient Design of Variable-Length Fast Fourier Transform Processor

Fast Fourier transform (FFT) plays an important role in the orthogonal frequency division multiplexing (OFDM) communication systems. In this paper, we propose an area-efficient design of variable-length FFT processor which can perform various FFT lengths of 512/1,024/2,048/4,096/8,192 points used in OFDM-based communication systems, such as digital audio broadcasting (DAB), digital video broadcasting-terrestrial (DVB-T) and digital video broadcasting-handheld (DVB-H). To reduce computational complexity and chip area, we develop a new variable-length FFT architecture by devising a mixed-radix algorithm that consist of radix-2, radix-2² and radix-2/4/8 algorithms and optimizing the realization by substructure sharing. Based on this architecture, an area-efficient design of variable-length FFT processor is presented. By synthesized using the UMC 0.18 μm process, the area of the processor is 2.9 mm² and the 8,192-point FFT can be performed correctly up to 50 MHz with power consumption 823 mW under a 1.8 V supply voltage.

Ionic outgassing from photoacid generators upon irradiation at 13.5 nm

Photoresist outgassing is considered a possible source of contamination of optics in extreme ultraviolet (EUV) lithography at 13.5 nm. We measured the relative proportions of ionic outgassing from 18 commercially available photoacid generators (PAG), which is a key component of chemically amplified photoresists, upon irradiation at 13.5 nm. These PAG include 17 triarylsulfonium or diaryliodonium salts, which contain or as the anion, and one PAG of molecular type. The overall outgassed ions in the range 10-200 u were counted in relative proportions. Outgassing of F⁺ is found to be dominant, and for most PAG the extent of F⁺ outgassing shows a satisfactory correlation with the ratio of F atomic photoabsorption to the overall PAG photoabsorption. Outgassed ions F⁺, CF⁺, and from PAG containing the anion and additional such as , and from those containing are identified. Triphenylsulfonium perfluoro-1-butanesulfonate is one PAG to emit the most abundant F⁺ and total ionic fragments, and a PAG of molecular type (N-hydroxy-5-norbornene-2,3-dicarboximide perfluoro-1-butanesulfonate) also emits abundantly both hydrocarbon ions and F⁺. Ionic outgassing of PAG cations includes (C₆H₅)₂S⁺ from R(C₆H₅)₂S⁺ salts and I⁺ from diaryliodonium salts. For PAG containing t-C₄H₉, significantly less F⁺ outgassing is observed; additional outgassing pathways are proposed. The pressure rise caused by PAG shows no dependence on the anion identity, but is correlated with cation photoabsorption, and ascribed to neutral aryl outgassing. Other minor outgassing species include from sulfonates; and ‘photostable’ PAH cations are identified for the first time and provide evidence of concurrent outgassing from, and polymerization of, PAG upon irradiation at 13.5 nm.     

A 1-V RF-CMOS LNA design utilizing the technique of capacitive feedback matching network

In this paper, a CMOS low-noise amplifier (LNA) with a new input matching topology has been proposed, analyzed and measured. The input matching network is designed through the technique of capacitive feedback matching network. The proposed LNA which is implemented in a technology is operated at the frequency of 12.8 GHz. It has a gain S21 of 13.2 dB, a noise figure (NF) of 4.57 dB and an NF_min of 4.46 dB. The reverse isolation S12 of the LNA can achieve and the input and output return losses are better than . The input 1-dB compression point is and IIP3 is . This LNA drains 10 mA from the supply voltage of 1 V.