{\alpha^{\prime}}_{\text{H}} -Dicalcium silicate bone cement doped with tricalcium phosphate: characterization,bioactivity and biocompatibility

The influence of phosphorus doping on the properties of $ \alpha^{\prime}_{\text{H}} $ -dicalcium silicate (C₂S) bone cement was analyzed, in addition to bioactivity and biocompatibility. All the cements were composed of a solid solution of TCP in C₂S ( $ \alpha^{\prime}_{\text{H}} $ -C₂S_ss) as the only phase present. The compressive strength ranged from 3.8–16.3 MPa. Final setting times ranged from 10 to 50 min and were lower for cements with lower L/P content. Calcium silicate hydrate was the principal phase formed during the hydration process of the cements. The cement exhibited a moderate degradation and could induce carbonated hydroxyapatite formation on its surface and into the pores. The cell attachment test showed that the $ \alpha^{\prime}_{\text{H}} $ -Ca₂SiO₄ solid solution supported human adipose stem cells adhesion and spreading, and the cells established close contacts with the cement after 24 h of culture. The novel $ \alpha^{\prime}_{\text{H}} $ -C₂S_ss cements might be suitable for potential applications in the biomedical field, preferentially as materials for bone/dental repair.     

Effect of Previous Milling of Precursors on Magnetoelectric Effect in Multiferroic {\mathrm{Bi}_{5}\mathrm{Ti}_{3}\mathrm{FeO}_{15}} Ceramic

$\mathrm{Bi}_{5}\mathrm{Ti}_{3}\mathrm{FeO}_{15}$ Bi 5 Ti 3 FeO 15 magnetoelectric (ME) ceramics have been synthesized and investigated. The ME effect can be described as an induced electric polarization under an external magnetic field or an induced magnetization under an external electric field. The materials in the ME effect are called ME materials, and they are considered to be a kind of new promising materials for sensors, processors, actuators, and memory systems. Multiferroics, the materials in which both ferromagnetism and ferroelectricity can coexist, are the prospective candidates which can potentially host the gigantic ME effect. $\mathrm{Bi}_{5}\mathrm{Ti}_{3}\mathrm{FeO}_{15}$ Bi 5 Ti 3 FeO 15 , an Aurivillius compound, was synthesized by sintering a mixture of $\mathrm{Bi}_{2}\mathrm{O}_{3}, \mathrm{Fe}_{2}\mathrm{O}_{3}$ Bi 2 O 3 , Fe 2 O 3 , and $\mathrm{TiO}_{2}$ TiO 2 oxides. The precursor materials were prepared in a high-energy attritorial mill for (1, 5, and 10) h. The orthorhombic $\mathrm{Bi}_{5}\mathrm{Ti}_{3}\mathrm{FeO}_{15}$ Bi 5 Ti 3 FeO 15 ceramics were obtained by a solid-state reaction process at 1313 K. The ME voltage coefficient ( $\alpha _\mathrm{ME}$ α ME ) was measured using the dynamic lock-in method. The highest ME voltage coefficient ( $\alpha _\mathrm{ME} = 8.28\,\text{ mV }{\cdot }\text{ cm }^{-1}{\cdot }\text{ Oe }^{-1})$ α ME = 8.28 mV · cm ? 1 · Oe ? 1 ) is obtained for the sample milled for 1 h at $H_\mathrm{DC }= 4$ H DC = 4  Oe (1 Oe = 79.58  $\text{ A }{\cdot }\text{ m }^{-1})$ A · m ? 1 ) .     

Fabrication and characterization of iron and fluorine co-doped BST thin films for microwave applications

The effects of fluorine co-doping by means of a post-thermal annealing process of iron-doped BST thin films in a fluorine-containing atmosphere have been investigated. XPS and ToF-SIMS sputter depth profiling verified a homogeneous fluorine distribution in the thin films. By employing EPR, it was shown that singly charged ( $ {\text{Fe}}_{\text{Ti}}^{\prime } $ – $ {\text{V}}_{\text{O}}^{ \cdot \cdot } $ )^· defect complexes, as well as ‘isolated’ $ {\text{Fe}}_{\text{Ti}}^{\prime } $ centres with a distribution of $ {\text{F}}_{\text{O}}^{ \cdot } $ sites in remote coordination spheres exist in the fluorinated films. Tunability enhancement due to fluorine co-doping as well as a Q-factor enhancement due to iron doping is demonstrated.     

Thermal Decomposition of Molecular Materials {\{{\rm N}(n{-}{\rm C}_{4}{\rm H}_{9})_{4}[{\rm M}^{\rm II} {\rm Fe}^{\rm III}({\rm C}_{2} {\rm O}_{4})_{3}]\}_{\infty},\,{\rm M}^{\rm II} = {\rm Zn},\, {\rm Co},\, {\rm Fe}}

Thermal decomposition of oxalate-based molecular precursors, namely ${\{{\rm N}(n{-} {\rm C}_{4} {\rm H}_{9})_{4}[{\rm Zn}^{\rm II}{\rm Fe}^{\rm III}({\rm C}_{2} {\rm O}_{4})_{3}]\}_{\infty}, \{{\rm N}(n{-}{\rm C}_{4}{\rm H}_{9})_{4}[{\rm Co}^{\rm II}{\rm Fe}^{\rm III}({\rm C}_{2}{\rm O}_{4})_{3}]\}_{\infty}}$ , and ${\{{\rm N}(n{-}{\rm C}_{4} {\rm H}_{9})_{4}[{\rm Fe}^{\rm II}{\rm Fe}^{\rm III}({\rm C}_{2}{\rm O}_{4})_{3}]\}_{\infty}}$ , abbreviated as BuZnFe, BuCoFe, and BuFeFe, respectively, are studied using thermogravimetry (TG) in the temperature range from ~300?K to ~675?K at multiple heating rates. This study also deals with how the thermal decomposition of the complexes proceed stepwise through a series of intermediate reactions. The effect of the divalent metal M^II on the nature of thermal decomposition of the complexes, reflected in their TG profiles in terms of number of steps involved, is reported in this study. The temperature range of thermal decomposition steps for BuZnFe, BuCoFe, and BuFeFe with the same heating rates are studied systematically. Two different isoconversional methods, namely an improved iterative method and a model-free method are employed to calculate the kinetic parameters, and thus the most probable reaction mechanism of thermal decomposition is determined. Based on kinetic parameters, the important thermodynamic parameters such as the changes of entropy, enthalpy, and Gibbs free energy are estimated for the activated complex formation from the precursors. Considering the mass loss during the different thermal decomposition steps of BuZnFe, BuCoFe, and BuFeFe, observed in the thermogravimetry profiles, the overall reactions of the thermal decompositions are demonstrated.     

Two new permutation polynomials with the form {\left(x^{2^k}+x+\delta\right)^{s}+x} over {\mathbb{F}_{2^n}}

This note presents two new permutation polynomials with the form ${p(x)=\left(x^{2^k}+x+\delta\right)^{s}+x}$ over the finite field ${\mathbb{F}_{2^n}}$ as a supplement of the recent work of Yuan, Ding, Wang and Pieprzyk.     

Cryptanalysis of a key exchange protocol based on the endomorphisms ring End{(\mathbb{Z}_{p} \times \mathbb{Z}_{p^2})}

Climent et?al. (Appl Algebra Eng Commun Comput 22:91?C108, 2011) identified the elements of the endomorphisms ring End ${(\mathbb{Z}_p \times \mathbb{Z}_{p^2})}$ with elements in a set, E _p , of matrices of size 2?× 2, whose elements in the first row belong to ${\mathbb{Z}_{p}}$ and the elements in the second row belong to ${\mathbb{Z}_{p^2}}$ . By taking advantage of matrix arithmetic, they proposed a key exchange protocol using polynomial functions over E _p defined by polynomials in ${\mathbb{Z}[X]}$ . In this note, we show that this protocol is insecure; it can be broken by solving a set of 10 consistent homogeneous linear equations in 8 unknowns over ${\mathbb{Z}_{p^2}}$ .     

A Study of Some Thermophysical Parameters in Glassy \mathrm{{Se}}_{80}\mathrm{{Te}}_{20} and \mathrm{{Se}}_{80}\mathrm{{Te}}_{10}\mathrm{{M}}_{10} (Cd, In, and Sb) Alloys

The present paper reports a comparative study of some thermophysical properties (thermal conductivity, thermal diffusivity, thermal effusivity, and specific heat per unit volume) for $\mathrm{{Se}}_{80}\mathrm{{Te}}_{20}$ Se 80 Te 20 and $\mathrm{{Se}}_{80}\mathrm{{Te}}_{10}\mathrm{{M}}_{10}$ Se 80 Te 10 M 10 (Cd, In, and Sb) alloys. The transient plane source technique is used for this purpose. The thermal conductivity is highest for $\mathrm{{Se}}_{80}\mathrm{{Te}}_{10}\mathrm{{In}}_{10}$ Se 80 Te 10 In 10 as compared to the other ternary alloys. This is explained in terms of the thermal conductivity of additive elements Cd, In, and Sb. The composition dependence of the thermal diffusivity and specific heat per unit volume is also discussed.     

Is There a Unified Description of Conductivity of Layered Cuprates ?

We present a novel approach to the analysis of the normal state in-plane $\sigma _{ab} $ and out-of-plane σ_c conductivities of anisotropic layered crystals such as oxygen deficient YBa ₂ Cu ₃ O _x . It can be shown that the resistive anisotropy is determined by the ratio of the phase coherence lengths in the respective directions; i.e., $\sigma _{ab} /\sigma _c = \ell _{ab}^2 /\ell _c^2 $ . From the idea that at all doping levels and temperatures T the out-of-plane transport in these crystals is incoherent, follows that $\ell _c $ is T-independent, equal to the spacing $\ell _0 $ between the neighboring bilayers. Thus, the T-dependence of $\ell _{ab} $ is given by the measured anisotropy, and $\sigma _{ab} (\ell _{ab} )$ dependence is obtained by plotting $\sigma _{ab} {\text{ }}vs{\text{ }}\ell = {\text{ (}}\sigma _{ab} /\sigma _c )^{1/2} \ell _0 $ .The analysis of several single crystals of YBa ₂ Cu ₃ O _x (6.35 < x < 6.93) shows that for all of them $\sigma _{ab} (\ell ) $ is described by a universal dependence $\sigma _{ab} /\overline \sigma = f(\ell /\overline \ell ) $ with doping dependent parameters $\overline \sigma {\text{ }}and{\text{ }}\overline \ell $ .     

Electrical conductivity of polycrystalline tin dioxide and its solid solution with ZnO

Electrical conductivity (σ) of “pure” and ZnO doped SnO₂ has been measured at different temperatures and oxygen partial pressures ( \(p_{{\text{O}}_{\text{2}} } \) )- From the variation of electrical conductivity of these materials three partial pressure ranges have been identifieD. In the high partial pressure rangeσ increases with decreasing \(p_{{\text{O}}_{\text{2}} } \) followed by a \(p_{{\text{O}}_{\text{2}} } \) independent region at lower \(p_{{\text{O}}_{\text{2}} } \) ´s and finally increases once again with a further decrease of \(p_{{\text{O}}_{\text{2}} } \) . These variations have been explained on the basis of an anti-Frenkel type defect structure and an interstitial solid solution of ZnO in SnO₂. The activation energy for the conduction process has been estimated and the values are found to differ in two different temperature ranges. In the low temperature range the conductivity is attributed mainly to the chemisorption of oxygen on the surface of the specimen.     

Modulated IR Radiometry Applied to Study \text{ TiO}_{2} Coatings with Gold Nanocluster Inclusions

In this work Au: $\text{ TiO}_{2}$ thin films prepared by dc reactive magnetron sputtering were studied. The thin films, with an amount of gold of about 15 at %, were subsequently annealed at constant temperatures between $200\,^{\circ }\text{ C}$ and $800\,^{\circ }\text{ C}$ , are here analyzed with respect to their thermal behavior. The changes of the material properties with increasing annealing temperature from initially amorphous to a gradually increasing crystalline structure and the formation of nanoclusters and gold nanoparticles of increasing size, from 5 nm to 17 nm, are analyzed with the help of the phase lag signals measured by modulated IR radiometry. The obtained results seem to indicate the formation of strong subsurface heat sources, which can be explained with the help of the surface plasmon resonance effect and which can be described by the theory of semitransparent coatings, with effects of semi-transparency both in the visible and the infrared spectrum.     

\text{ CO}_{2} Laser-Based Pulsed Photoacoustic Ammonia Detection

Detecting ammonia traces is relevant in health, manufacturing, and security areas, among others. As ammonia presents a strong absorption band (the $\nu _{2}$ mode) around 10  $\upmu $ m, some of the physical properties which may influence its detection by means of pulsed photoacoustic (PA) spectroscopy with a TEA $\text{ CO}_{2}$ laser have been studied. The characteristics of the ammonia molecule and the laser intensity may result in a nonlinear dependence of the PA signal amplitude on the laser fluence. Ammonia absorption can be described as a simple two-level system with power broadening. As $\text{ NH}_{3}$ is a polar molecule, it strongly undergoes adsorption phenomena in contact with different surfaces. Therefore, physical adsorption–desorption at the cell’s wall is studied. A theoretical model, based on Langmuir’s assumptions, fits well to the experimental results with stainless steel. Related to these studies, measurements led to the conclusion that, at the used fluenced values, dissociation by multiphotonic absorption at the 10P(32) laser line may be discarded. A calibration of the system was performed, and a detection limit around 190 ppb (at 224 $\text{ mJ}\cdot \text{ cm}^{-2}$ ) was achieved.     

Study of Glass-Transition Kinetics of Pb-Modified Se_{80}In_{20} System by Using Non-isothermal Differential Scanning Calorimetry

Glass-transition kinetics of $\mathrm{Se}_{80}\mathrm{In}_{20-\mathrm{x}}\mathrm{Pb}_{\mathrm{x}}$ ( $x =$ 0, 5, 10, and 15) chalcogenide glasses have been carried out at different heating rates by using differential scanning calorimeter (DSC) under the non-isothermal condition. The glass-transition temperature $T_{\mathrm{g}}$ and peak glass-transition temperature $T_{\mathrm{pg}}$ have been determined from DSC thermograms. The reduced glass temperature $T_{\mathrm{rg}}$ , total relaxation time $\tau _{T_{g}}$ thermal-stability parameters $K^{l}$ and $S$ , the activation energy of glass transition $E_{\mathrm{g}}$ , the fragility index $F_{\mathrm{i}}$ , and the average coordination number $\langle Z\rangle $ have been calculated on the basis of the experimental results. The temperature differences $(T_{\mathrm{c}}-T_{\mathrm{g}}), K_{\mathrm{gl}}, K^{l}, S$ , and $E_{\mathrm{g}}$ are found to be maxima for $\mathrm{Se}_{80}\mathrm{In}_{10}\mathrm{Pb}_{10}$ glass. This indicates that $\mathrm{Se}_{80}\mathrm{In}_{10}\mathrm{Pb}_{10}$ glass has the highest thermal stability and glass-forming ability in the investigated compositional range. These results could be explained on the basis of modification of the chemical bond formation due to incorporation of Pb in the Se–In glassy matrix.     

Theoretical Investigations on Electrocaloric Properties of \mathrm{PbZr}_{0.95}\mathrm{Ti}_{0.05}\mathrm{O}_{3} Thin Film

Based on a phenomenological model, the electrocaloric effect (ECE) accompanied with the ferroelectric-to-paraelectric phase transition in a PbZr $_{0.95}$ 0.95 Ti $_{0.05}$ 0.05 O $_{3}$ 3 thin film was investigated. The extracted data reveal many features of the ECE such as electrocaloric entropy changes, heat capacity changes, and temperature changes as functions of temperature due to different electric fields shifts. From the behavior of the PbZr $_{0.95}$ 0.95 Ti $_{0.05}$ 0.05 O $_{3}$ 3 thin film in phase transitions, it leads to a large change of heat capacity of 105.94 J  ${\cdot }\,$ · kg ${^{-1}}\,{\cdot }\,{^{\circ }}$ ? 1 · ° C, a temperature change of 22.44 K, and a relative cooling power of 1469 J  ${\cdot }$ ·  kg $^{-1}$ ? 1 .     

Transfer Partial Molar Isentropic Compressibilities of (l-Alanine/l-Glutamine/Glycylglycine) from Water to 0.512 {\mathrm{mol}}\!\cdot \!{\mathrm{kg}}^{-1} Aqueous {\mathrm{KNO}}_{3}/0.512\, {\mathrm{mol}}\!\cdot \! {\mathrm{kg}}^{-1} Aqueous {\mathrm{K}}_{2}{\mathrm{SO}}_{4} Solutions Between 298.15 K and 323.15 K

Speeds of sound of (l-alanine/l-glutamine/glycylglycine $\,+\, 0.512\, {\mathrm{mol}}\cdot {\mathrm{kg}}^{-1}$ + 0.512 mol · kg ? 1 aqueous ${\mathrm{KNO}}_{3}/0.512\, {\mathrm{mol}}\cdot {\mathrm{kg}}^{-1}$ KNO 3 / 0.512 mol · kg ? 1 aqueous ${\mathrm{K}}_{2}{\mathrm{SO}}_{4}$ K 2 SO 4 ) systems have been measured for several molal concentrations of amino acid/peptide at different temperatures: $T$ T = (298.15 to 323.15) K. Using the speed-of-sound and density data, the parameters, partial molar isentropic compressibilities $\phi _{\kappa }^{0}$ ? κ 0 and transfer partial molar isentropic compressibilities $\Delta _{\mathrm{tr}} \phi _{\kappa }^{0}$ Δ tr ? κ 0 , have been computed. The trends of variation of $\phi _{\kappa }^{0}$ ? κ 0 and $\Delta _{\mathrm{tr}} \phi _{\kappa }^{0}$ Δ tr ? κ 0 with changes in molal concentration of the solute and temperature have been discussed in terms of zwitterion–ion, zwitterion–water dipole, ion–water dipole, and ion–ion interactions operative in the systems.     

Superconductivity of YBa2−x Nd x Cu3O y Solid Solution

The solubility of Nd at the Ba sites and the superconductivity of YBa_2?x Nd _x Cu₃O _y were investigated by X-ray powder diffraction and measurements of the electrical resistance and ac susceptibility. The single Re123 phase was obtained for x≤0.30. The onset transition temperature $T_{\text{c}}^{{\text{on}}}$ is insensitive to the Nd content x in the region of x≤0.40. All are higher than 95 K. The zero resistance transition temperatures $T_{\text{c}}^{{\text{zero}}}$ , however, exhibits two-step variation with the increase of x. For x≤0.25, $T_{\text{c}}^{{\text{zero}}}$ are all above 92 K. The highest $T_{\text{c}}^{{\text{zero}}}$ of 94 K was obtained for x=0.25. For x≥0.3 $T_{\text{c}}^{{\text{zero}}}$ drops sharply to about 84 K. Finally $T_{\text{c}}^{{\text{zero}}}$ falls to 30 K and $T_{\text{c}}^{{\text{zero}}}$ is below 10 K for x=0.5. The two-step variation of T _c might be an indication of the existence of two trap levels for holes.     

Ion exchange synthesis and thermal characteristics of some \left[ \rm{\mathbf{N}}_{{2222}}^{{+}} \right] based ionic liquids

Eight salts were obtained by reacting tetraethylammonium cation $\big[ {{\rm {\bf N}}_{{\rm {\bf 2222}}}^{{+}} } \big]$ with inorganic anions like BF $_{{4}}^{{-}}$ , NO $_{{3}}^{{-}}$ , NO $_{{2}}^{{{-}}}$ , SCN^???, BrO $_{{3}}^{{-}}$ , IO $_{{3}}^{{-}}$ , PF $_{{6}}^{{-}}$ and HCO $_{{3}}^{{-}}$ using ion exchange method. These ionic liquids (ILs) were characterized using thermal methods, infrared spectroscopy and densitometry. Thermophysical properties such as density, coefficient of volume expansion, heat of fusion, heat capacity and thermal energy storage capacity were determined. Thermal conductivity of the samples was determined both in solid and liquid phases. Owing to high values of thermal energy storage capacity coupled with handsome liquid phase thermal conductivity, ILs under investigation were recommended as materials for thermal energy storage (TES) as well as heat transfer applications.     

Mass transfer through a single grain boundary in alumina bicrystals under oxygen potential gradients

The mass-transfer behavior through grain boundaries (GBs) in alumina was systematically investigated using four types of alumina bicrystals. The alumina bicrystal wafers were exposed to the constant oxygen potential gradient $ \left( {\Updelta P_{{{\text{O}}_{ 2} }} } \right) $ generated by the combination of two different oxygen partial pressures $ P_{{{\text{O}}_{ 2} }} \left( {\text{II}} \right) $ and $ P_{{{\text{O}}_{ 2} }} \left( {\text{I}} \right) $ of 10⁵ and 1?Pa, respectively, at 1923?K. Ridges were formed along the GBs on the surface subjected to $ P_{{{\text{O}}_{ 2} }} \left( {\text{II}} \right) $ , and deep GB ditches were developed on the $ P_{{{\text{O}}_{ 2} }} \left( {\text{I}} \right) $ surface mainly during the migration of aluminum thorough GBs from the $ P_{{{\text{O}}_{ 2} }} \left( {\text{I}} \right) $ surface to $ P_{{{\text{O}}_{ 2} }} \left( {\text{II}} \right) $ surface. The surface morphology changes in the vicinity of the GBs were observed by atomic force microscopy. It was found that the surface morphology changes indicative of the aluminum GB diffusion were strongly dependent on the GB characteristics. The GB diffusion coefficients of aluminum estimated from the volume of the GB ridges showed a clear correlation to the local bonding environments of GB cores estimated from theoretical calculations reported previously.     

Dislocation structure at a \{ {\overline{1} 2\overline{1} 0} \}/ {\langle} 10\overline{1} 0 {\rangle} low-angle tilt grain boundary in LiNbO3

LiNbO₃ is a ferroelectric material with a rhombohedral R3c structure at room temperature. A LiNbO₃ bicrystal with a $ \{ {\overline{1} 2\overline{1} 0} \}/ {\langle}10\overline{1} 0{\rangle}$ 1° low-angle tilt grain boundary was successfully fabricated by diffusion bonding. The resultant boundary was then investigated using high-resolution TEM. The boundary composed a periodic array of dislocations with $ b = { 1}/ 3{\langle} \overline{1} 2\overline{1} 0{\rangle} $ . They dissociated into two partial dislocations by climb. A crystallographic consideration suggests that the Burgers vectors of the partial dislocations should be $ 1/ 3{\langle}01\overline{1} 0{\rangle} $ and $ 1/ 3{\langle}\overline{1} 100{\rangle} $ , and a stacking fault on $ \{ {\overline{1} 2\overline{1} 0} \} $ is formed between the two partial dislocations. From the separation distance of a partial dislocation pair, a stacking fault energy on $ \{ {\overline{1} 2\overline{1} 0} \} $ was estimated to be 0.25?J/m² on the basis of isotropic elasticity theory.     

Study of Structural Modification and Fluctuation Induced Electrical Conductivity in \text {YBa}_{2}\text {Cu}_{3}\text {O}_{7-y}+x \text {BaSnO}_{3} Superconductor Composite

A series of \((1-x) \text {YBa}_{2}\text {Cu}_{3}\text {O}_{7-y} + x \text {BaSnO}_{3 }(x = 0.0, 0.1, 0.3, 0.5, 1.0, 2.5, 5.0\,\text {wt}{\%})\) samples were prepared using the solid-state reaction method. XRD graphs confirm the orthorhombic structure in pristine as well as in composite samples. Raman spectra show the presence of all the vibration modes in pure as well as in the composite samples. In addition, some defect-induced modes have also appeared in the higher weight % BSO-added sample, and no loss of apical oxygen O(4) at 500 cm \(^{-1}\) occurs due to BaSnO \(_{3}\) (BSO) addition. Microstructural analysis reveals the unchanged grain size with the incorporation of dielectric BSO particles in the YBCO matrix. Superconducting transition temperature determined from standard four-probe method decreases with the increase of BSO wt%. Excess conductivity fluctuation analysis using Aslamazov–Larkin model fitting reveals transition of two dominant regions (2D and 3D) above \(T_\mathrm{c}\) . 2D to 3D crossover temperature i.e. Lawrence–Doniach temperature that demarcates dimensional nature of fluctuation inside the grains is influenced by BSO incorporation in YBCO matrix.