Detoxification and Nutritional Aspects of Mowrah Meal

Mowrah meal was processed by a number of solvent systems e. g. water, ethanol and iso-propanol for the removal of saponin with a minimum loss of other meal components e. g. protein and carbohydrate. The experimental parameters e. g. temperature variation time of extraction, solid: solvent ratio and moisture level in meal were investigated with the solvent system that proved to be most effective for the removal of saponin. A nutritional study with treated and untreated mowrah meal was also carried out. It was found that mowrah meal with intact moisture level and with 50% of the total moisture level could be effectively detoxified by iso-propanol. Feeding experiment also supported that the method reported here detoxified mowrah meal.     

Fracture behavior of coated/uncoated graphite-epoxy composites

The static delamination behavior of graphite/epoxy composite specimens subjected to mode I tensile opening (using UDCB

1 Uniform double cantilever beam.

specimens), and pure mode II shear loading (using ENF

2 End-notched flexural.

specimens) were studied. The graphite epoxy composites for the study were made from commercially treated fibers, with and without an electropolymerized interlayer. The mode I fracture energy (G_IC) was found to be significantly higher (more than 50 percent) for the coated fibers. However, this improvement was accompanied by a high reduction (more than 3 times) in the mode II fracture energy (G_IIC). This effect is apparently related to poor adhesion between the interlayer and the epoxy resin, which may be corrected by use of a “top layer” of appropriate composition to form chemical bonds between the phases. The fracture toughness (K_IC) of composites made with commercially treated fibers was also evaluated, using double side-notched specimens.     

Oxidative aging of thermoplastic polyimide films

Two linear polyimides were subjected to accelerated isothermal aging at temperatures between 300 and 400°C. Losses in toughness correlated well with changes in glass transition temperature (T_g) of the films, but not with weight loss. Both materials have extrapolated lifetimes of 100,000 h near their T_g's. © 1995 John Wiley & Sons, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America.

     

Thermal analysis of poly(phenylene sulfide) polymers. I: Thermal characterization of PPS polymers of different molecular weights

Thermal properties of Fortron®

1 ®Registered trademark of Hoechst Celanese Corporation.

poly(phenylene sulfide) (PPS) polymers of different molecular weights were studied by DSC. Crystallization studies revealed that the ability of these polymers to crystallize decreases with increasing molecular weight. The Avrami equation poorly describes the isothermal crystallization of PPS. Lamellar crystallization was observed for the lowest molecular weight sample. For the other, higher molecular weight polymers the Avrami exponent is always between 2 and 3, suggesting development of distorted spherulites with heterogeneous nucleation. The temperature dependence of the solid and melt heat capacities have been determined. The solid specific heat capacity did not exhibit a molecular weight dependence. The heat capacity increase at the glass transition, T_g, has been calculated to be 28.1 J°C^?1 mole^?1. The equilibrium melting point of PPS has been estimated to be 348.5°C using the Hoffman–Weeks method. The T_g of PPS increases with molecular weight. The T_g of the highest molecular weight evaluated is 92.5°C. A DMA relaxation peak corresponding to the onset of the phenylene ring rotation occurs at ?92°C. Only the highest molecular weight could be quenched to a completely amorphous state.     

Stevensanaloge,Durch Nickelkomplexe Katalysierte Umlagerung Von Triarylphosphoryliden Und Darstellung Sowie Strukturbestimmung Von Phosphorylid-Nickeltricarbonylkomplexen

The Stevens rearrangement of the triarylphosphorusylids R₃ P=CHR′ (III) (R′ = H, CH₃, C₂ H₅) to diarylbenzylphosphines (V) is catalyzed by nickel complexes (e.g., (COD)₂ Ni (I)). Attempts to prepare trimesitylphosphine-methylene result in direct formation of dimesityl (mesitylmethyl) phosphine (XII) — the first recorded direct Stevens rearrangement of a phosphorusylid. Phosphorusylids react with nickeltetracarbonyl without rearrangement to give complexes of the type R₃P=CH_a · Ni(CO)₃ (XIV). The structure of XIV has been established by the IR and NMR spectra and confirmed by an X-ray structural determination.

1 B. L. Barnett and C. Krüger, J. Cryst. Mol. Struct., im Druck.

The ylid is bonded to the nickel through the C-atom with resulting hybridization from sp² towards sp³.     

The STOBBE Condensation with Pyrrolyl Aldehydes – a synthesis of indole derivatives

The condensation of pyrrolyl-2-aldehyde or 1-methyl-pyrrolyl-2-aldehyde with dimethyl succinate, using sodium hydride as condensing agent, gave predominantly the halfesters 1a and 1c respectively. Their structure and (E)-configuration

1 i. e., pyrrol ring and COOCH₃ group are in trans position. This nomenclature follows the IUPAC 1968 Tentative Rules, Section E, Fundamental Stereochemistry, J. org. Chemistry 35 , 2849 (1970).

were confirmed by their cyclisation to the corresponding indole derivatives 2a–h .     

Thermomechanical properties of blends of pectin and poly(vinyl alcohol)

Blends of citrus pectin and several types of poly(vinyl alcohol) were investigated to determine the effects of compositional variables and polymer type on film properties. Some films were also plasticized with glycerol. Films were cast from water onto Lexan™ plates, dried, and removed. Thermomechanical properties were obtained using a dynamic mechanical analyzer, and thermodynamic transitions were also obtained using a differential scanning calorimeter. Increasing the amount of poly(vinyl alcohol) in the blends reduced the storage and loss modulus of the films above the glass transition temperature (T_g). The T_g values observed decreased as the amount of PVOH in the blend increased. Addition of glycerol depressed the PVOH T_g and merged it into the T_g of the pectin/glycerol blend. Changes in the molecular weight and degree of ester hydrolysis of poly(vinyl alcohol) exerted a rather small effect on the blends. © 1996 John Wiley & Sons, Inc.

1 Reference to a brand or firm name does not constitute an endorsement by the U.S. Department of Agriculture over others of a similar nature.

     

Generation and Characterization of a Soybean Line with a Vernonia galamensis Diacylglycerol Acyltransferase-1 Gene and a myo-Inositol 1-Phosphate Synthase Knockout Mutation

Soybean (Glycine max) meal is an important protein source. Soybean meal with lower phytate and oligosaccharides improves meal quality. A single recessive mutation in soybean myo-inositol 1-phosphate synthase (Gm-lpa-TW75-1) confers a seed phenotype with low phytate and increased inorganic phosphate. The mutant was crossed with high oil lines expressing a diacylglycerol acyltransferase1 (DGAT) gene from Vernonia galamensis (VgD). Gm-lpa-TW75-1 X VgD, designated GV, has 21%, and 22% oil and 41% and 43% protein from field and greenhouse seed production, respectively. No significant differences were found in mineral concentrations except for Fe which was 229 μg/g dry mass for GV followed by 174.3 for VgD and 162 for Gm-lpa-TW75-1. Phosphate (Pi) is higher in Gm-lpa-TW75-1 as expected at 5 mg/g, followed by GV at 1.6 mg/g whereas Jack, VgD, and Taiwan75 have about 0.3 mg/g. The Gm-lpa-TW75-1 line has the lowest phytate concentration at 1.4 mg/g followed by GV with 1.8 mg/g compared to Taiwan75, VgD, and Jack with 2.5 mg/g. This work describes a high oil and protein soybean line, GV, with increased Pi and lower phytate which will increase the nutritional value for human and animal feed.     

A polymeric amine–copper(II) complex as catalyst for the hydrolysis of 1,2,2-trimethylpropyl methylphosphonofluoridate (soman) and bis (1-methylethyl) phosphorofluoridate (DFP)

The Cu (II) complex of poly-4-vinylpyridine, quaternized with 19 mol % ethyl bromide and 36 mol % 4-chloromethyl-4′-methyl-2,2′-bipyridine, was examined as a catalyst for the hydrolysis of the toxic organophosphorous compounds bis (1-methylethyl) phosphorofluoridate ( 1 ,

1 Registry no.: 1 , 55-91-4; 2 , 96-64-0.

DFP) and 1,2,2-trimethylpropyl methylphosphonofluoridate ( 2 , soman). Studies were carried out at 25.0 and 37.0°C for both substrates in MOPS buffer at pH 7.0. In the presence of 7.31 × 10^?3 M catalyst at 25.0°C, soman is hydrolyzed with a first-order rate constant of 0.019 min^?1 (t_1/2 = 37.5 min), whereas DFP hydrolyzes with a rate constant of 0.011 min^?1 (t_1/2 = 63.8 min). For soman, this represents a 14-fold increase over the uncatalyzed rate in the same buffer. Other studies examined the effect of a strongly sorptive polymeric resin on catalysis by this copper-containing polymer and found a dramatic decrease in the hydrolysis rate of soman in the presence of the polymeric sorbent.     

Synthesis of phosphorus-containing wofatit cation exchangers and their affinity toward selected cations

A number of solid Cationits have been prepared derived from Wofatit

1 Trademark, VEB Chemiekombinat Bitterfield.

gel and canal structures: styrene/DVB, chloromethylated ST/DVB, and acrylic acid/DVB copolymers. To functionalize the copolymers, PCl₃/AlCl₃ and dialkyl phosphites or trialkyl phosphites were used. The influence of the polymer matrix structure and the chemical structure of the functional groups of obtained Ionits on their affinity toward 23 metallic cations in acidic media has been investigated using the conductivity method. To obtain comparison data, commercial “Wofatit”–sulfonic and–carboxylic Cationits, have been tested under identical conditions.     

Glass fiber-reinforced epoxy composites

Glass fiber-reinforced epoxy composites were prepared from the matrix resins tetraglycidyl diaminodiphenylmethane

1 Systematic name: N,N,N′,N′-Tetrakis(2,3-epoxypropyl)-4,4′-diaminodiphenylmethane.

(TGDDM) and tetraglycidyl bis(o-toluidino)-methane

2 Systematic name: N,N,N′,N′-Tetrakis(2,3-epoxypropyl)-4,4′-bis(o-toluidino)methane.

(TGMBT) using various amines like 4,4′-diaminodiphenylmethane (DDM), 4,4′-diaminodiphenylsulfone (DDS) and diethylene triamine (DETA) as curing agents. The fabricated laminates were evaluated for their mechanical and dielectrical properties and chemical resistance. The composites prepared using an epoxy fortifier (20 phr) showed significant improvement in the mechanical properties.     

Dicyclopentadienoxidation. II 5. Katalysierte Flüssigphasenoxidation von Dicyclopentadien

Dicyclopentadiene Oxidation. II. Catalyzed Liquid-Phase Oxidation of Dicyclopentadiene The liquid-phase oxidation of dicyclopentadiene 1 by molecular oxygen was studied in the presence of MoO₂(acac)₂

1 Acac- Acetylacetonat

as a typical epoxidation catalyst. The yield of the mono-epoxides 2 and 3 is increased to 56,4% (uncatalyzed reaction: 43,6%). The ratio of the two mono-epoxides is decreased to 2/3 = 2,6 in relation to the uncatalyzed reaction ( 2/3 = 7,1). The influence of temperature, conversion and solvents is described. The bisepoxide 4 is formed at lower conversions than in the uncatalyzed reaction. But also at higher conversions of 1 not more than 10% of the bisepoxide 4 is formed     

Properties of standard materials for reflection

This article gives a short survey of some literature on the calibration, suitability, properties, and use of various materials which are used as standards of reflectance. The classical ultimate reference standard, smoked magnesium oxide, is discussed briefly, and information is given on the properties of materials presently used: BaSO₄, Russian opal glasses, ceramic tiles, and Halon.

1 Halon is a registered trade name of the Allied Chemical Corporation.

The suitability of these materials for use as transfer standards or working standards is discussed.     

Incorporating primary amine pendant groups into copolymers via nitroxide mediated polymerization

Primary amine incorporation as pendant groups on copolymers was studied via nitroxide mediated polymerization (NMP) using the BlocBuilder family of unimolecular initiators. When using the neat BlocBuilder initiator, a protected amine monomer, N-(t-BOC-aminopropyl)methacrylamide (tBOC-MAm), was copolymerized with styrene (ST) at 110 °C or terpolymerized with ST and methyl methacrylate (MMA) at 90 °C. When copolymerized with ST, tBOC-MAm incorporation into copolymers was low compared to the feed composition, despite good control of the molecular weight distribution (polydispersity ). tBOC-MAm/MMA/ST terpolymerizations indicated better tBOC-MAm incorporation but high and poor “living character” (loss of linear number average molecular weight versus monomer conversion X relationship at X > 0.3 and poor ability to re-initiate a second batch of monomer). In contrast, using a protected form of BlocBuilder attached to oligomeric ST or MMA/ST-based macroinitiators, feed compositions f_AST,0 containing 4-aminostyrene (AST) non-protected monomer up to 0.10, resulted in good primary amine incorporation and linear M_n versus X up to X = 0.4. Higher f_AST,0 resulted in side-reactions and poorer control of the polymerization process. Thus, for the two primary amine monomers studied, in protected or non-protected forms, controlled polymerizations with good incorporation of amine-containing monomer are more readily approached when using AST in conjunction with a protected BlocBuilder-terminated oligomeric initiator, provided the AST feed composition is not excessively high.     

Grafting of methyl methacrylate on isoprene rubber

Methyl methacrylate has been grafted on artificial isoprene rubber (IR) latex, with use of redox initiation. The properties of latices containing up to 40 phr

1 Parts per hundred parts of rubber.

methyl methacrylate (MMA) as well as solid products containing up to 80 phr of this compound were studied. Compared with ungrafted IR latex with the same solids content, the grafted IR latices had a lower viscosity, owing to their particle size being larger. Vulcanised films obtained from the grafted latices showed a considerably higher modulus, particularly at large deformations, than those based on IR or blends of IR with polymethyl methacrylate. by incorporation of certain reinforcing white fillers in the MMA-grafted IR latices, a further increase in the modulus of the latex films was effected.     

The STOBBE Condensation with Dimethyl Homophthalate. Part I

The condensation of methyl 2-thienyl, methyl 2-furyl, and phenyl 2-thienyl ketone with dimethyl homophthalate in the presence of either potassium t-butoxide or sodium hydride as condensing agent, gave predominantly the (z)-half esters

1 The nomenclature of cis/trans isomers follows the IUPAC Tentative rules, Section E, Fundamental Stereochemistry, J. org. Chemistry 35 , 2849 (1970). See also N. R. El-Rayyes, J. prakt. Chem. 315 (2), 300 (1973). (E) = trans-(Heterocyclic ring/CO₂CH₃) (Z) = cis-(Heterocyclic ring/CO₂CH₃)

. The structure and configuration of the products were inferred by chemical and spectroscopic means.     

A study of electrolyte-phobic molten carbonate fuel cell electrodes

The incorporation of electrolyte-phobic material into gas diffusion electrodes enhances their performance. The principles governing the choice of electrolyte-phobic materials in molten carbonate electrolyte are discussed. Contact angle measurements of molten NaLiCO₃ on materials which have hexagonal layer-like structures confirmed that provided _{LV SV}, the contact angle will be greater than 90°. Of the materials tested (C, BN, BaO.6.Fe₂O₃, PbO.6Fe₂O₃), only C possessed adequate corrosion resistance. Electrolyte-phobic anodes, prepared by incorporation of graphite fibres into the electrocatalyst mixture, significantly reduced concentration polarization and paste electrolyte cells using such electrodes gave 160 mA/cm² at 0.6 V on 80% H₂/20% CO₂ fuel at 600°C, as opposed to 80 mA/cm² for conventional cells.     

Dicyclopentadienoxidation. I,Unkatalysierte Flüssigphasenoxidation von Dicyclopentadien

Dicyclopentadiene Oxidation I. Uncatalyzed Liquid-Phase Oxidation of Dicyclopentadiene Dicyclopentadiene is oxidized by molecular oxygen to a mixture of the monoepoxides 2 and 3 . The identification of the epoxides 2 , 3 and 4 was executed with authentic samples prepared by epoxidation with peracetic acid or with tert-butylhydroperoxide in the presence of MoO₂(acac)₂

1 acac — Acetylacetonat

The main product is the substituted norbornene oxide 2 . Allylic oxidation is also observed. Remarkable amounts of hydroperoxides can be determined iodometrically. The formation of allylic oxidation products 7 , 8 , 9 and 10 was proved by GC-MS-analysis. It is shown that in the uncatalyzed liquid phase oxidation of dicyclopentadiene no more than 50% of epoxides are formed. The bisepoxide 4 was found in small amounts only at higher conversions of the dicyclopentadiene.     

Skin and layer formation in films prepared from carbohydrates,poly(ethylene-co-acrylic acid), and polyethylene

Cornstarch, a canary dextrin, and a maltodextrin were compared in films blown from carbohydrates compounded with poly(ethylene-co-acrylic acid) (EAA), low-density polyethylene (LDPE), and aqueous ammonium hydroxide plasticizer. Dextrins or maltodextrins having dextrose equivalent values of one and greater caused dark-colored films with caramel odors, probably due to Maillard reactions. Blown films with hydrophobic skins and water sensitive cores were produced with the dextrinized carbohydrates, but not from natural cornstarch. Water sensitivity of films containing the dextrinized carbohydrate was reduced by recycling the films through the blown film die. A mechanism for development of the skins is proposed, as is a method for preparing thin semipermeable membranes. © 1993 John Wiley & Sons, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America.

     

Cure of epoxy resins with aromatic amines: High heat-distortion studies

Castings having unexpectedly high heat-distortion temperatures result when certain treated resins of the EPON

1 EPON is a registered trademark of the Shell Oil Company.

828 type and about 75% of the stoichiometric amount of m-phenylenediamine, are postcured for 10–20 hr. at 175–200°C. The improvement in heat-distortion temperature is about 100°C., to values as high as 250°C. A recrystallized resin has given the highest values. Other glycidyl ethers of polyphenols have shown this phenomenon to a lesser degree, but other amine curing agents, including isomers and substitution products of m-phenylenediamine, have not. Some evidence of a new curing reaction has been developed, by NMR and pyrolysis studies of model compounds, which supports the postulate that the m-phenylenediamine is alkylated with a fifth epoxy group during the postcure, presumably at a ring carbon, resulting in greater crosslinking.