Synergistic effects of 4A zeolite on the flame‐retardant properties and thermal stability of an efficient halogen‐free flame‐retardant EVA composite

The synergistic effects of 4A zeolite (4A) on the thermal degradation, flame retardancy, and char formation of an efficient halogen‐free flame‐retardant ethylene‐vinyl acetate copolymer composite (EVA/IFR) were investigated by limited oxygen index (LOI), vertical burning test (UL‐94), cone calorimeter test (CCT), digital photography, scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), laser Raman spectroscopy (LRS) and thermogravimetric analytical (TGA) methods. It was found that a small amount of 4A clearly improved the LOI value of the EVA/IFR composite and reinforced the fire retardant performance with a great reduction in the combustion parameters of the EVA/IFR system from the CCT test. The entire composites passed the UL‐94 V‐0 rating test. The TGA and integral procedure decomposition temperature (IDPT) results showed that 4A enhanced the thermal stability of the EVA/IFR system and increased the char residue content effectively. The morphological structures observed by digital and SEM imaging revealed that 4A could promote EVA/IFR to form a more continuous and compact intumescent char layer. The LRS and EDS results demonstrated that by introduction of 4A into the EVA/IFR system, a more graphite structure was formed with increase phosphorus content in the char residue. POLYM. ENG. SCI., 56:380–387, 2016. © 2016 Society of Plastics Engineers     

Synthesis of novel triazine charring agent and its effect in intumescent flame‐retardant polypropylene

A novel charring agent (CNCA‐DA) containing triazine and benzene ring, using cyanuric chloride, aniline, and ethylenediamine as raw materials, was synthesized and characterized. The effects of CNCA‐DA on flame retardancy, thermal degradation, and flammability properties of polypropylene (PP) were investigated by limited oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis (TGA), and cone calorimeter test (CCT). The TGA results showed that CNCA‐DA had a good char forming ability, and a high initial temperature of thermal degradation; the char residue of CNCA‐DA reached 18.5% at 800°C; Ammonium polyphosphate (APP) could improve the char residue of APP/CNCA‐DA system, the char residue reached 31.6% at 800°C. The results from LOI and UL‐94 showed that the intumescent flame retardant (IFR) containing CNCA‐DA and APP was very effective in flame retardancy of PP. When the mass ratio of APP and CNCA‐DA was 2 : 1, and the IFR loading was 30%, the IFR showed the best effect; the LOI value reached 35.6%. It was also found that when the IFR loading was only 20%, the flame retardancy of PP/IFR can still pass V‐0 rating in UL‐94 tests, and its LOI value reached 27.1%. The CCT results demonstrated that IFR could clearly change the decomposition behavior of PP and form a char layer on the surface of the composites, consequently resulting in efficient reduction of the flammability parameters, such as heat release rate (HRR), total heat release (THR), smoke production rate (SPR), total smoke production (TSP), and mass loss (ML). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Halogen‐free intumescent flame‐retardant ethylene‐vinyl acetate copolymer system based on organic montmorillonite and graphene nanosheets

Halogen‐containing flame retardants are not preferred for environmental reasons. Herein, a halogen‐free intumescent flame‐retardant ethylene‐vinyl acetate copolymer (EVA/IFR) system containing organic montmorillonite (OMMT) and graphene nanosheets (GNSs) is fabricated with well dispersion structure, enhanced thermal‐oxidative resistance at high temperature. Interestingly, the amount of residual chars from thermogravimetric analysis is increased to 12.7 wt % at 700 °C, the EVA/IFR composite containing both OMMT and GNSs exhibits the best flame retardancy with the lowest peak heat release rate value of 529.58 kW m^?2, and the highest limited oxygen index value of 24.8%. The excellent flame retardancy is attributed to the formation of complete and compact protective char layer. Furthermore, the decreases of the mechanical properties caused by the addition of IFR are relieved and a high volume resistivity is maintained when combining OMMT and GNSs in the EVA/IFR system together. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46361.     

Effects of two kinds of THEIC‐based charring agents on flame‐retardant properties of polylactide

Two charring agents tris (2‐hydrooxyethyl) isocyanurate terephthalic acid ester, (dimer/trimer mixture TT23, and tetramer TT4) were synthesized by using tris (2‐hydrooxyethyl) isocyanurate (THEIC) and terephthalic acid (TPA) as raw materials. These two charring agents were combined with ammonium polyphosphate (APP) to form intumescent flame retardants (IFR) for polylactide (PLA). The thermal stability of IFRs were tested by TGA, it is found that APP/TT4 mixture has a higher thermal stability and a better char forming ability than that of APP/TT23 mixture. The combustion properties and thermal stability of PLA/APP/TT23 and PLA/APP/TT4 composites were evaluated by UL‐94 burning tests, limiting oxygen index (LOI), cone calorimeter tests and TGA, the chemical structure of char residues were analyzed by FTIR and XPS. It can be concluded that PLA with 30 wt % of APP/TT4 (weight ratio 5 : 1) achieved the greatest flame retardancy. Moreover, the continuous and expansionary char layer observed from SEM images proved better char forming ability of TT4 than that of TT23. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42086.     

Influence of the pentaerythritol phosphate melamine salt content on the combustion and thermal decomposition process of intumescent flame‐retardant ethylene–vinyl acetate copolymer composites

Pentaerythritol phosphate melamine salt (PPMS) as a single‐molecule intumescent fire retardant was synthesized and characterized. The influence of the PPMS content on the combustion and thermal decomposition processes of intumescent‐flame‐retardant (IFR) ethylene–vinyl acetate copolymer (EVA) composites was studied by limiting oxygen index (LOI) measurement, UL 94 rating testing, cone calorimetry, thermogravimetric analysis, and scanning electron microscopy. The LOI and UL 94 rating results illustrate that PPMS used in EVA improved the flame retardancy of the EVA composites. The cone calorimetry test results show that the addition of PPMS significantly decreased the heat‐release rate, total heat release, and smoke‐production rate and enhanced the residual char fire performance of the EVA composites. The IFR–EVA3 composite showed the lowest heat‐release and smoke‐production rates and the highest char residue; this means that the IFR–EVA3 composite had the best flame retardancy. The thermogravimetry results show that the IFR–EVA composites had more residual char than pure EVA; the char residue yield increased with increasing PPMS content. The analysis results for the char residue structures also illustrated that the addition of PPMS into the EVA resin helped to enhance the fire properties of the char layer and improve the flame retardancy of the EVA composites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42148.     

Synergistic effect of amino silane functional montmorillonite on intumescent flame‐retarded SEBS and its mechanism

A functional modified montmorillonite (F‐OMMT) was prepared by intercalating pristine montmorillonite using phosphonium salt and subsequent grafting through alkyl amino silane coupling. The synergistic effect of F‐OMMT on the flame retardancy and char‐forming mechanism of intumescent flame‐retarded polystyrene‐b‐(ethylene‐co‐butylene)‐b‐styrene (SEBS) composite (SEBS/IFR) was investigated. When 2 wt % F‐OMMT was introduced to the SEBS/IFR composite, the limited oxygen index (LOI) value of the composite increased from 24.9% to 26.9%, and the peak heat release rate significantly reduced according to microscale combustion calorimeter (MCC) test. The outer char demonstrated that F‐OMMT produced dense and intact nanoparticles with a stabilised graphite structure. Meanwhile, F‐OMMT helped form a crosslinking network containing large amounts of P, O, N, and Si in the char layer. Along with IFR, the amino functional group on the clay released nonflammable ammonia in the gaseous phase, the enhanced blowing effect can overcome the high‐viscosity resistance of SEBS, more intumescent coating with strengthened clay platelets was then produced. In addition, the tensile properties of SEBS/IFR/F‐OMMT composite increased evidently for the good dispersion effect. F‐OMMT can serve as an effective and environmentally friendly additive for SEBS/IFR composite. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44953.     

Effect of the particle size of expandable graphite on the thermal stability,flammability, and mechanical properties of high‐density polyethylene/ethylene vinyl‐acetate/expandable graphite composites

In this article, high‐density polyethylene/ethylene vinyl‐acetate copolymer (HDPE/EVA) composites filled with two different particle sizes (45 and 150 µm) of expandable graphite (EG) were prepared by using a twin‐screw extruder. The thermal stability, flammability, and mechanical properties of HDPE/EVA/EG composites were investigated by thermogravimetric analysis (TGA), cone calorimeter test (CCT), tensile test, and scanning electron microscopy (SEM). The results from TGA and CCT indicated that EG significantly enhanced the thermal stability and fire resistance of HDPE/EVA blend. The thermal stability and flame retardancy of HDPE/EVA/EG composites were improved with decreasing particle size of EG. Although the onset of weight loss of the flame‐retardant composites occurred at a lower temperature than that of HDPE/EVA blend, the flame‐retardant composites produced a large amount of char residue at a high temperature. The consolidated char layer formed a barrier, which could reduce heat, low‐molecular transfer, and air incursion, and thus enhanced the flame retardancy. The data from the tensile test showed that the addition of EG deteriorated the mechanical properties; however, the tensile stress and strain of HDPE/EVA/EG composites increased with decreasing the particle size of EG owing to the strong interface adhesion between polymer matrix and inorganic particles. POLYM. ENG. SCI., 54:1162–1169, 2014. © 2013 Society of Plastics Engineers     

Flame retardation of dibromoneopentyl glycol on intumescent flame‐retardant/low‐density polyethylene composites

On the basis of ammonium polyphosphate (APP) microencapsulated with pentaerythritol/dibromoneopentyl glycol (DBNPG) mixed phosphate melamine salt as an intumescent flame retardant (IFR), the influence of DBNPG on the flame retardancy of IFR/low‐density polyethylene was investigated. The results prove that DBNPG could influence the combustion heat and the thermal barrier properties of the char layer in combustion. The intumescent degree (ID), compactness, and closure were the determinants of the thermal barrier properties of the char layer. A greater ID below 500°C and then a more compact and closed char layer above 500°C contributed to the better thermal barrier properties. An appropriate DBNPG reduced the combustion heat and promoted the formation of a compact and closed char layer by increasing of the melting viscosity of the composites. However, excessive DBNPG destroyed the closure of the char layer and increased the combustion heat because of a decrease in the melting viscosity of the composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41244.     

Modification of lignin and its application as char agent in intumescent flame‐retardant poly(lactic acid)

Urea‐modified lignin was prepared according to the Mannich reaction and well characterized by Fourier transform infrared spectrometer, elemental ananlyses, and scanning electron microscopy (SEM). Ammonium polyphosphate (APP) and urea‐modified lignin were added into poly(lactic acid) (PLA) as a novel intumescent flame‐retardant (IFR) system to improve flame retardancy of PLA. The flammability of IFR–PLA composites was studied using limiting oxygen index, UL‐94 vertical burning method and cone calorimeter test, and their thermal stability was evaluated by thermogravimetric analysis. The results showed that the urea‐modified lignin combined with APP exhibited much better flame retardancy and thermal stability than that of the combination of virgin lignin and APP. The improvement may be attributed to the better char morphology with more phosphoric char evidenced by SEM and X‐ray photoelectron spectroscopy. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Preparation of a chitosan‐based flame‐retardant synergist and its application in flame‐retardant polypropylene

A novel flame‐retardant synergist, chitosan/urea compound based phosphonic acid melamine salt (HUMCS), was synthesized and characterized by Fourier transform infrared spectroscopy and ³¹P‐NMR. Subsequently, HUMCS was added to a fire‐retardant polypropylene (PP) compound containing an intumescent flame‐retardant (IFR) system to improve its flame‐retardant properties. The PP/IFR/HUMCS composites were characterized by limiting oxygen index (LOI) tests, vertical burning tests (UL‐94 tests), microscale combustion calorimetry tests, and thermogravimetric analysis to study the combustion behavior and thermal stability. The addition of 3 wt % HUMCS increased the LOI from 31.4 to 33.0. The addition of HUMCS at a low additive amount reduced the peak heat‐release rate, total heat release, and heat‐release capacity obviously. Furthermore, scanning electron micrographs of char residues revealed that HUMCS could prevent the IFR–PP composites from forming a dense and compact multicell char, which could effectively protect the substrate material from combusting. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40845.     

Effects of an (Intumescent flame retardant)‐montmorillonite combination on the thermal stability and fire‐retardant properties of LDPE/EVA nanocomposites

The combined effects of an organically modified montmorillonite (OMMT) and an intumescent flame retardant, poly (piperazine spirocyclic pentaerythritol bisphosphonate) (PPSPB), in (low‐density polyethylene)/[ethylene‐(vinyl acetate) copolymer] (LDPE/EVA) nanocomposites were observed. The results from X‐ray diffraction and transmission electron microscopy studies showed that exfoliated LDPE/EVA/PPSPB/OMMT nanocomposites were formed. Thermal stability and flammability properties were investigated by thermogravimetric analysis and cone calorimeter tests. The combination of PPSPB and montmorillonite improved thermal stability and reduced significantly the flammability, including peak heat release rate (PHRR), total heat release, average mass loss rate, etc. The PHRR of LDPE/EVA/PPSPB/OMMT was reduced by about 50% compared to that of an LDPE/EVA blend. The morphology and composition of the residues generated by cone calorimeter tests were investigated by scanning electronic microscopy (SEM) and energy dispersive X‐ray (EDX) analysis. The results of SEM showed that a compact and dense intumescent char was formed from the LDPE/EVA/PPSPB/OMMT nanocomposite upon combustion. The results of EDX examination revealed that the carbon content of this char was increased significantly by the combined effect of PPSPB and montmorillonite. J. VINYL ADDIT. TECHNOL., 19:285–292, 2013. © 2013 Society of Plastics Engineers     

The effect of different organic modified montmorillonites (OMMTs) on the thermal properties and flammability of PLA/MCAPP/lignin systems

The effect of different organic modified montmorillonites (DK1, DK2, and DK4) based on a novel intumescent flame retardant (IFR) poly(lactic acid) (PLA) system is reported. The IFR system was composed of microencapsulated ammonium polyphosphate and lignin. The morphological characterization of PLA/OMMT nanocomposites was conducted by X‐ray diffractometry and transmission electron microscopy. The flame retardant and thermal properties of the composites were evaluated by limiting oxygen index (LOI), vertical burning test (UL‐94), and cone calorimeter. From the results, it could be seen that the sample containing DK2 possessed the best flame retardance, such as lower peak heat release rate (pHRR) and higher LOI value. The thermal degradation and gas products of the samples were monitored by thermogravimetric analysis and thermogravimetric analysis infrared spectrometry. Scanning electron microscopy was used to explore the surface morphology of the char residues. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2013     

Synthesis,characteristic of a novel flame retardant containing phosphorus and its application in poly(ethylene‐co‐vinyl acetate)

A novel flame retardant (SPDH) containing phosphorus was synthesized through the reaction of 10‐(2, 5‐dihydroxyphenyl)‐9, 10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO‐HQ) and synthesized intermediate product 3, 9‐dichloro‐2, 4, 8, 10‐tetraoxa‐3, 9‐diphosphaspiro(5.5)undecane‐3, 9‐dioxide (SPDPC). The structure and properties of SPDPC and SPDH were characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR) spectroscopy and thermogravimetric analysis (TGA). After blending with poly(ethylene‐co‐vinyl acetate) (EVA), the flame‐retardant properties of EVA/SPDH composites were estimated by cone calorimeter, limited oxygen index (LOI) and UL‐94 tests, whereas the thermal stabilities were investigated using TGA. The morphological microstructure of the char formed by EVA/SPDH composite after combustion in cone calorimeter was investigated by scanning electron microscopy (SEM). The results indicate that the flame retardant and thermal stability were improved by incorporation of SPDH. The rich foamy char layers were observed from the residues after combustion in a cone calorimeter, which exactly benefits the improvement of thermal stability and flame retardant property of materials. Copyright © 2010 John Wiley & Sons, Ltd.     

Study on flame‐retardancy and thermal degradation behaviors of intumescent flame‐retardant polylactide systems

Two intumescent flame‐retardant (IFR) additives, IFR‐I and IFR‐II, were synthesized and their structure was confirmed by Fourier transform infrared spectroscopy and nuclear magnetic resonance. Polylactide (PLA) was modified by the two IFRs to obtain flame‐retardant composites. The flammability of the PLA/IFR composites was characterized by the vertical burning test UL‐94 and limiting oxygen index. The limiting oxygen index values of the PLA composites increased with increase of IFR content. The PLA composite with 20 wt% IFR‐I could pass the UL‐94 V0 rating, while the composite with 30 wt% IFR‐II could not. The results of pyrolysis combustion flow calorimetry showed that the heat release capacity of PLA composites with 30 wt% IFR‐I decreased 43.1% compared with that of pure PLA. The thermal degradation and gas products of PLA/IFR‐I systems were monitored by thermogravimetric analysis and thermogravimetric analysis infrared spectrometry. Scanning electron microscopy was used to investigate the surface morphology of the char residue. Copyright © 2011 Society of Chemical Industry     

Synergistic effect of intumescent flame retardant and zinc borate on linear low-density polyethylene

A series of novel intumescent flame retardant (IFR) based on melamine, neopentyl glycol, and aluminum diethylphosphinate were prepared and tested. In addition, the synergistic effect of the novel IFR and zinc borate (ZB) on the flame retardancy of LLDPE composites was investigated. The structures of novel IFR and ZB were characterized by X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The limiting oxygen index (LOI) increased from 19.3% for the pure LLDPE to 27% for the 25 wt% IFR/5 wt% ZB composites and the composites achieved the desired V-0 rating in the UL-94 test. Thermogravimetric analysis showed that the addition of IFR/ZB reduced the pyrolysis rate of the LLDPE composites at high temperatures and increased the amount of the char residues, and the char residue of LLDPE-5 reached 12.1 wt% at 700°C. Cone calorimetry (CCT) data showed that the peak of total heat release, heat release rate, and fire growth index were comparatively reduced, indicating that the addition of IFR/ZB decreased the fire hazard of LLDPE composites. The formation of a compact and thermally stable char layer on the surfaces of LLDPE composites was revealed from the scanning electrone microscopy images and digital photographs of the char residue after the CCT tests.     

Flammability,thermal stability,and mechanical properties of ethylene-propylene-diene monomer/polypropylene composites filled with intumescent flame retardant and inorganic synergists

Three kinds of inorganic particles, zinc borate (ZB), organic montmorillonite (OMMT), and expanded graphite (EG) as synergistic flame retardants, are incorporated into ethylene-propylene-diene monomer/polypropylene (EPDM/PP) composites filled with intumescent flame retardants (IFR). The effect of three synergistic flame retardants on the combustion, thermal stability, and mechanical properties of the EPDM/PP/IFR composites are investigated by limiting oxygen index (LOI), UL-94 test, cone calorimeter test (CCT), thermogravimetric analysis (TGA), scanning electron microscopy, mechanical property testing, and dynamic mechanical analysis (DMA). The results from LOI, UL-94, and CCT show that the synergistic effect of IFR with ZB and EG is better than IFR with OMMT in the flame retardant EPDM/PP/IFR composites. The TGA results indicate that the thermal stability and char residues of the composites is improved with the addition of inorganic particles, which is attributed to the formation of dense char layers to isolate heat flow. DMA results including storage modulus (G'), loss modulus (G"), and loss factor (tan δ) suggest that the composites with inorganic particles exhibit more rubber-filler interaction, which limits the movement of the rubber chains.     

Effect of a novel phosphorus‐containing compound on the flame retardancy and thermal degradation of intumescent flame retardant polypropylene

A novel flame retardant, tetra(5,5‐dimethyl‐1,3‐ dioxaphosphorinanyl‐2‐oxy) neopentane (DOPNP), was synthesized successfully, and its structure was characterized by FT‐IR, ¹H NMR, and ³¹P NMR. The thermogravimetric analysis (TGA) results demonstrate that DOPNP showed a good char‐forming ability. Its initial decomposition temperature was 236.4°C based on 1% mass loss, and its char residue was 41.2 wt % at 600°C, and 22.9 wt % at 800°C, respectively. The flame retardancy and thermal degradation behavior of novel intumescent flame‐retardant polypropylene (IFR‐PP) composites containing DOPNP were investigated using limiting oxygen index (LOI), UL‐94 test, TGA, cone calorimeter (CONE) test, and scanning electron microscopy (SEM). The results demonstrate that DOPNP effectively raised LOI value of IFR‐PP. When the loading of IFR was 30 wt %, LOI of IFR‐PP reached 31.3%, and it passed UL‐94 V‐0. TGA results show that DOPNP made the thermal decomposition of IFR‐PP take place in advance; reduced the thermal decomposition rate and raised the residual char amount. CONE results show that DOPNP could effectively decrease the heat release rate peak of IFR‐PP. A continuous and compact char layer observed from the SEM further proved the flame retardance. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Synergistic flame‐retardant effect of halloysite nanotubes on intumescent flame retardant in LDPE

Synergistic flame‐retardant effect of halloysite nanotubes (HNTs) on an intumescent flame retardant (IFR) in low‐density polyethylene (LDPE) was investigated by limited oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis (TGA), cone calorimeter (CC) test, and scanning electronic microscopy (SEM). The results of LOI and UL‐94 tests indicated that the addition of HNTs could dramatically increase the LOI value of LDPE/IFR in the case that the mass ratio of HNTs to IFR was 2/28 at 30 wt % of total flame retardant. Moreover, in this case the prepared samples could pass the V‐0 rating in UL‐94 tests. CC tests results showed that, for LDPE/IFR, both the heat release rate and the total heat release significantly decreased because of the incorporation of 2 wt % of HNTs. SEM observations directly approved that HNTs could promote the formation of more continuous and compact intumescent char layer in LDPE/IFR. TGA results demonstrated that the residue of LDPE/IFR containing 2 wt % of HNTs was obviously more than that of LDPE/IFR at the same total flame retardant of 30 wt % at 700°C under an air atmosphere, and its maximum decomposing rate was also lower than that of LDPE/IFR, suggesting that HNTs facilitated the charring of LDPE/IFR and its thermal stability at high temperature in this case. Both TGA and SEM results interpreted the mechanism on the synergistic effect of HNTs on IFR in LDPE, which is that the migration of HNTs to the surface during the combustion process led to the formation of a more compact barrier, resulting in the promotion of flame retardancy of LDPE/IFR. In addition, the mechanical properties of LDPE/IFR/HNTs systems were studied, the results showed that the addition of 0.5–2 wt % of HNTs could increase the tensile strength and the elongation at break of LDPE/IFR simultaneously. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40065.     

Flame retardancy and water resistance of novel intumescent flame‐retardant oil‐filled styrene–ethylene–butadiene–styrene block copolymer/polypropylene composites

A novel halogen‐free flame‐retardant composite consisting of an intumescent flame retardant (IFR), oil‐filled styrene–ethylene–butadiene–styrene block copolymer (O‐SEBS), and polypropylene (PP) was studied. On the basis of UL‐94 ratings and limiting oxygen index (LOI) data, the IFRs consisted of a charring–foaming agent, ammonium polyphosphate, and SiO₂ showed very effective flame retardancy and good water resistance in the IFR O‐SEBS/PP composite. When the loading of IFR was only 28 wt %, the IFR–O‐SEBS/PP composite could still attain a UL‐94 V‐0 (1.6 mm) rating, and its LOI value remained at 29.8% after a water treatment at 70°C for 168 h. Thermogravimetric analysis data indicated that the IFR effectively enhanced the temperature of the main thermal degradation peak of the IFR–O‐SEBS/PP composites because of the formation of abundant char residue. The flammability parameters of the composites obtained from cone calorimetry testing demonstrated that water treatment almost did not affect the flammability behavior of the composite. The morphological structures of the char residue and fractured surfaces of the composites were not affected by the water treatment. This was attributed to a small quantity of IFR extracted from the composite. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39575.     

An easy‐to‐obtain silicone‐containing flame retardant and its effects on the combustion of polycarbonate

A novel silicone‐containing flame retardant (HSOBA) synthesized from hydrogen‐containing silicone oil and Bisphenol A via a simple approach has been incorporated into polycarbonate (PC) matrix to study its effects on the flame retardancy. The flame retardancy of PC/HSOBA composites is investigated by limiting oxygen index (LOI), vertical burning tests (UL‐94), and cone calorimeter measurement. The LOI value of the composites is 31.7 and the UL‐94 rating reaches V‐0, when the content of HSOBA is 3 wt %. Cone calorimeter data confirm that the HSOBA acts as an effective additive functioning both as flame retardants and as smoke suppressant. Evolution of the thermal behaviors of the composites tested by TGA, the morphological structures, and the constituent of char residue after LOI tests characterized by scanning electronic microscopy‐energy‐dispersive X‐ray analysis were used to explain the possible flame‐retardant mode. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012