Effects of surfactants on hydrodynamics and mass transfer in a split‐cylinder airlift reactor

Effects of various concentrations (0–5 ppm) of anionic (sodium dodecyl sulfate, SDS) and non‐ionic (Tween‐80 and Triton X‐405) surfactants on gas hold‐up and gas–liquid mass transfer in a split‐cylinder airlift reactor are reported for air–water. Surfactants were found to strongly enhance gas hold‐up. Non‐ionic surfactants were more effective in enhancing gas hold‐up compared to the anionic surfactant SDS. An enhanced gas hold‐up and a visually reduced bubble size in the presence of surfactants implied an enhanced gas–liquid interfacial area for mass transfer. Nevertheless, the overall gas–liquid volumetric mass transfer coefficient was reduced in the presence of surfactants, suggesting that surfactants greatly reduced the true liquid film mass transfer coefficient and this reduction outweighed the interfacial area enhancing effect. Presence of surfactants did not substantially affect the induced liquid circulation rate in the airlift vessel.     

Hydroxypropylmethylcellulose–anionic surfactant interactions in aqueous systems

The increase in the viscosity of an aqueous solution or gel of hydroxypropylmethylcellulose (HPMC) in the presence of an anionic surfactant is attributed to a two-step process: (a) the surfactant undergoes ion–dipole interaction with the ethereal oxygen in HPMC, in the absence or presence of water, and (b) hydrocarbon moieties in the now pendant surfactant molecules undergo hydrophobic bonding, in the presence of water, resulting in an apparent increase in the molecular weight of the HPMC. DSC of dry blends and dried gels or films confirmed HPMC–sodium lauryl sulfate interaction. Work-to-break measurements on films cast from aqueous solutions of HPMC, in the absence or presence of anionic surfactants, indicated an apparent increase in the molecular weight of HPMC in the presence of surfactants.     

Interactions of a smart cationic polyelectrolyte based on hydroxypropylcellulose with an anionic surfactant

Novel thermosensitive, cationic polyelectrolyte was obtained by grafting N‐vinylformamide onto hydroxypropylcellulose followed by the hydrolysis of the formamide groups to the amine groups. The effect of the ionic strength on the lower critical solution temperature of the polymers was studied. The interactions of the polymers with sodium dodecyl sulfate (SDS) as a model anionic surfactant were studied. It was found by the measurements of the light scattering and fluorescence spectroscopy that the graft copolymers obtained strongly interact with SDS with the formation of polymer‐surfactant complexes. The values of critical association concentration (cac) of these polymer‐surfactant systems were found to be of the order of 10^?5 mol/dm³ at pH = 6.5 and of the order of 10^?6 mol/dm³ at pH = 2.5. The polymer was shown to be potentially useful for the purification of water from anionic surfactants. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Gelation Process and Physicochemical Properties of Thai Silk Fibroin Hydrogels Induced by Various Anionic Surfactants for Controlled Release of Curcumin

Hydrogels based on Thai silk fibroin (SF) were prepared by the induction of various anionic surfactants including sodium octyl sulfate (SOS), sodium dodecyl sulfate (SDS), and sodium tetradecyl sulfate (STS), which have a similar chemical structure but different alkyl chain lengths and charges. The effects of anionic surfactant types and their concentrations on the gelation mechanism and time of SF were systematically investigated. We found that SDS and STS that have long alkyl chain lengths and high negative charges could accelerate the gelation of SF to occur within 14–42 min in a concentration-dependent manner. SOS that has a short alkyl chain length and low negative charge slowly induced SF to gel at around 113–144 h. The mechanisms of SF gelation induced by these three anionic surfactants were supposed to be combination of hydrophobic and electrostatic interactions, as well as the self-transition of beta sheets. The SF + STS hydrogels were further employed to encapsulate curcumin for the controlled release application. The SF + 0.09% wt. STS hydrogel encapsulating curcumin showed a slow rate of degradation while sustained the release of curcumin. This hydrogel can be applied as a minimal invasive injectable hydrogel or as a hydrogel for topical treatment of diseases.     

Effects of salts in the Hofmeister series and solvent isotopes on the gelation mechanisms for hydroxypropylmethylcellulose hydrogels

The effects of various inorganic salts and isotopic solvents on the thermal gelation behavior of hydroxypropylmethylcellulose (HPMC) in aqueous solutions were examined by micro-differential scanning calorimetry and rheological measurements. It was found that salting-out salts, such as NaCl, promoted the sol–gel transition of HPMC at a lower temperature. An analysis of solvent isotope effects on the changes in the temperature at maximum heat capacity (T_m) with salt concentration showed that interchain hydrogen bonding (hydrogen bonding between the hydroxyl groups of different HPMC chains) was involved in the sol–gel transition, and its strength depended on the temperature and salt concentration. It was demonstrated that the effectiveness of anionic species in changing the T_m of the HPMC solutions was in the sequence of the Hofmeister series. Anionic species play a role in reducing T_m by their influence on the structure of the water, which in turn affects interactions between hydroxyl groups and water molecules, interchain hydrogen bonding, and the strength of the water cages prohibiting hydrophobic association. Rheological and microcalorimetric results indicated that the change in the thermodynamics of gelation of the HPMC aqueous solution was determined by the salt types and concentration, and the effect of monovalent salts was found to be more cooperative than that of multivalent salts on the sol–gel transition. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effects of surfactants on the microstructures of electrospun polyacrylonitrile nanofibers and their carbonized analogs

In this study, the influence of surfactants on the processability of electrospun polyacrylonitrile (PAN) nanofibers and their carbonized analogs was investigated. The surfactants employed in this effort are Triton X‐100 (nonionic surfactant, SF‐N), sodium dodecyl sulfate (SDS) (anionic surfactant, SF‐A), and hexadecyltrimethylammonium bromide (HDTMAB) (cationic surfactant, SF‐C). Interactions between electrospun PAN and the surfactants, reflected in effects on as‐spun and carbonized nanofiber morphologies and microstructures, were explored. The results show that uniform nanofibers are obtained when cationic and anionic surfactants (surfactant free and nonionic surfactants) are utilized in the preparation of electrospun PAN. In contrast, a bead‐on‐a‐string morphology results when the aniconic and cationic surfactants are present, and defect structure is enhanced with cationic surfactant addition. Moreover, fiber breakage is observed when the nonionic surfactant Triton X‐100 is employed for electrospinning. After carbonizaition, the PAN polymers were observed to have less ordered structures with addition of any type of surfactant used for electrospinning and the disorder becomes more pronounced when the anionic surfactant is utilized. Owing to the fact that microstructure defects create midband gap states that enable more electrons to be emitted from the fiber, an enhancement of electron emission is observed for PAN electrospun in the presence of the anionic surfactant. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3726–3735, 2013     

Rheo-kinetics of bovine serum albumin in catanionic surfactant systems

The effects of catanionic surfactant systems consisting of mixtures of cationic cetyltrimethylamonium bromide (CTAB) and anionic sodium dodecyl sulfate (SDS) on the rheological properties and kinetics of bovine serum albumin (BSA) were investigated. The ionic strength of the solution was varied by using different mixing ratio of SDS and CTAB. Gelation curves observed in dynamic viscoelastic measurements were fitted with gelation kinetics models to describe the gelation under isothermal and non-isothermal conditions. Overall, the gelation of BSA in cationic-rich solutions was found to be more energetically favorable when compared with BSA solvated in anionic-rich solutions. Consequently, highest gel temperature (T_gel) and time (t_gel) were observed for anionic-rich solutions with SDS/CTAB molar ratio of 4.0 (i.e., SDS/CTAB=4.0), while lowest gel temperature and time were found for cationic-rich solutions with SDS/CTAB molar ratio of 0.25 (SDS/CTAB=0.25). BSA in equal molar ratio of the mixed surfactants (SDS/CTAB=1.0) showed a gel temperature and time in the halfway between the anionic and cationic-rich regions. Interestingly, under isothermal and non-isothermal conditions, BSA in equimolarly mixed and anionic-rich solutions showed a heat-dependent protective effect against thermal denaturation and gelation. The protective effect on BSA gelation in equimolar and anionic-rich solutions was diminished by increasing the catanionic concentration under non-isothermal conditions, while under isothermal conditions, protective effect on BSA gelation increased with catanionic concentration. On the other hand, cationic-rich solutions did not protect BSA from thermal denaturation and gelation, and therefore the gelation rate increased with catanionic concentration in all heating conditions examined.     

Morphology,structure, and conductivity of polypyrrole prepared in the presence of mixed surfactants in aqueous solutions

Polypyrrole (PPy) was prepared from different mixed‐surfactant solutions with ammonium persulfate as an oxidant. Three types of combinations were selected, including cationic/anionic, cationic/nonionic, and anionic/nonionic mixed‐surfactant solutions. The surfactants used in the experiments included cetyltrimethylammonium bromide (cationic surfactant), sodium dodecyl sulfate (anionic surfactant), sodium dodecyl sulfonic acid salt (anionic surfactant), poly(vinyl pyrrolidone) (nonionic surfactant), and poly(ethylene glycol) (nonionic surfactant). The morphology, structure, and conductivity of the resulting PPy were investigated in detail with scanning electron microscopy, Fourier transform infrared spectra, and the typical four‐probe method, respectively. The results showed that the interaction between the different surfactants and the interaction between the surfactants and the polymer influenced the morphology, structure, and conductivity of the resulting polymer to different degrees. The cationic surfactant favored the formation of nanofibers, the addition of anionic surfactants produced agglomeration but enhanced the doping level and conductivity, and the presence of a nonionic surfactant weakened the interaction between the other surfactant and the polymer in the system. In comparison with the results for monosurfactant solutions, the polymerization of pyrrole in mixed‐surfactant solutions could modulate the morphologies of PPy, which ranged from nanofibers of different lengths to nanoparticles showing various states of aggregation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1987–1996, 2007     

Hydrophobically modified acrylamide‐based polybetaines. II. Interaction with surfactants in aqueous solution

The interaction of hydrophobically modified (HM) polybetaines with selected small molecule surfactants in aqueous solution was investigated using rheological and surface tension analyses. The polymers included acrylamide‐based, HM polybetaines containing N‐butylphenylacrylamide (BPAM) and specified amounts of sulfobetaine, 3‐(2‐acrylamido‐2‐methylpropanedimethylammonio)‐1‐propanesulfonate (AMPDAPS), or carboxybetaine, 4‐(2‐acrylamido‐2‐methylpropyldimethylammonio)butanoate (AMPDAB); corresponding control (co)polymers lacking BPAM and/or betaine comonomer(s) were also examined for comparative purposes. Low charge density terpolymers exhibited greater viscosity enhancement with the addition of surfactant compared to the high charge density terpolymers. The addition of sodium dodecyl sulfate (SDS) produced the largest increase in solution viscosity, while N‐dodecyl‐N,N,N‐trimethylammonium bromide (DTAB), N‐dodecyl‐N,N‐dimethylammonio‐1‐propanesulfonate (SB3–12), and Triton X‐100 enhanced polymer solution viscosity to a lesser degree. In most cases, the high charge density carboxybetaine terpolymer exhibited diminished solution viscosity upon surfactant addition. The polymers lacking hydrophobic modification showed no detectable viscosity enhancement in the presence of surfactants. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 658–671, 2004     

Effect of surfactants on phenol removal by the method of polymerization and precipitation catalysed by Coprinus cinereus peroxidase

The removal of phenol by peroxidase‐catalysed polymerization was examined using Coprinus cinereus peroxidase in the presence of surfactants. The non‐ionic surfactants with poly(oxyethene) residues, Triton X‐100, Triton X‐405 and Tween 20, enhanced the phenol removal efficiency at a level similar to high relative molecular mass poly(ethylene glycol) (relative molecular mass 3000). Although the improvement in the removal efficiency was less than that of Triton X‐100, Span 20, sodium lauryl sulfate (SDS) and lauryl trimethylammonium bromide (DTAB) also enhanced the removal efficiency. The requirement of the enzyme for almost 100% removal of 100 mg dm^?3 phenol decreased to one‐fourth by the addition of 30 mg dm^?3 Triton X‐100. Triton X‐100, Triton X‐405, Tween 20 and DTAB could reactivate the enzyme precipitated with the phenol polymer, leading to the restarting of the phenol removal reaction. Copyright © 2003 Society of Chemical Industry     

表面活性剂水溶液池热核沸腾传热的试验研究

对表面活性剂SDS、CTAB、Triton X-114和Triton X-100水溶液物性及其池核沸腾传热进行了试验,重点探讨了表面活性剂分子结构参数和溶液物性对沸腾传热的影响。结果表明：表面活性剂溶液沸腾传热效果、表面活性剂相对分子质量对表面活性剂溶液沸腾传热的影响规律都与表面活性剂的电离特性密切相关,离子型表面活性剂SDS与CTAB溶液的沸腾传热系数比值与相对分子质量的比值成－0.22的指数关系,而非离子表面活性剂Triton X-114和Triton X-100溶液不存在指数关系。动态表面张力和热流密度相等时,SDS和CTAB溶液沸腾传热特性差异主要受相对分子质量和平衡接触角的影响,而Triton X-100和Triton X-114溶液则受质量分数、EO基团数、浊点和动力黏度的综合作用。     

Viscoelastic Surfactants with High Salt Tolerance,Fast‐Dissolving Property,and Ultralow Interfacial Tension for Chemical Flooding in Offshore Oilfields

Injected chemical flooding systems with high salinity tolerance and fast‐dissolving performance are specially required for enhancing oil recovery in offshore oilfields. In this work, a new type of viscoelastic‐surfactant (VES) solution, which meets these criteria, was prepared by simply mixing the zwitterionic surfactant N‐hexadecyl‐N,N‐dimethyl‐3‐ammonio‐1‐propane sulfonate (HDPS) or N‐octyldecyl‐N,N‐dimethyl‐3‐ammonio‐1‐propane sulfonate (ODPS) with anionic surfactants such as sodium dodecyl sulfate (SDS). Various properties of the surfactant system, including viscoelasticity, dissolution properties, reduction of oil/water interfacial tension (IFT), and oil‐displacement efficiency of the mixed surfactant system, have been studied systematically. A rheology study proves that at high salinity, 0.73 wt.% HDPS/SDS‐ and 0.39 wt.% ODPS/SDS‐mixed surfactant systems formed worm‐like micelles with viscosity reaching 42.3 and 23.8 mPa s at a shear rate of 6 s^?1, respectively. Additionally, the HDPS/SDS and ODPS/SDS surfactant mixtures also exhibit a fast‐dissolving property (dissolution time <25 min) in brine. More importantly, those surfactant mixtures can significantly reduce the IFT of oil–water interfaces. As an example, the minimum of dynamic‐IFT (IFT_min) could reach 1.17 × 10^?2 mN m^?1 between the Bohai Oilfield crude oil and 0.39 wt.% ODPS/SDS solution. Another interesting finding is that polyelectrolytes such as sodium of polyepoxysuccinic acid can be used as a regulator for adjusting IFT_min to an ultralow level (<10^?2 mN m^?1). Taking advantage of the mobility control and reducing the oil/water IFT of those surfactant mixtures, the VES flooding demonstrates excellent oil‐displacement efficiency, which is close to that of polymer/surfactant flooding or polymer/surfactant/alkali flooding. Our work provides a new type of VES flooding system with excellent performances for chemical flooding in offshore oilfields.     

Insight into the Interaction Between Carbopol® 940 and Ionic/Nonionic Surfactant

Mixtures of a cross‐linked polyacrylic acid (Carbopol^® 940) and two types of surfactants, namely anionic sodium dodecylsulfate (SDS) and nonionic Tween^® 80, were investigated by viscometry, conductometry, tensiometry, spectrophotometry, fluorimetry and scanning electron microscopy (SEM). The addition of nonionic surfactant decreased the reduced viscosity and the transmittance of the Carbopol^® polymer aqueous solutions. Furthermore, the interaction between Carbopol^® 940 and SDS was characterized by two significant concentration values: the critical aggregation concentration of SDS was particularly independent of Carbopol^® polymer concentration while the polymer saturation point of both surfactants increased with the increase in polymer content. The values of critical aggregation concentration and polymer saturation point obtained using various techniques confirmed the occurrence of Carbopol^® polymer–surfactant associations. The effect of different SDS and Tween^® 80 concentrations on the conformation of Carbopol^® 940 in aqueous solution could be explained through hydrophobic association between surfactant micelles and Carbopol^® polymer tails and through hydrogen bonding in the case of Tween^® 80. Additionally, the surfactant‐induced structural changes were confirmed in Carbopol^® 940–SDS and Carbopol^® 940–Tween^® 80 aqueous solutions by SEM measurements.     

Effects of surfactants on acrylonitrile polymerization initiated by a Cr(VI)–cyclohexanone redox system: A kinetic study

The polymerization of acrylonitrile (AN) was kinetically studied with a Cr(VI)–cyclohexanone (CH) redox system as an initiator from 25 to 45° C in the presence of a surfactant. The rate of polymerization and the percentage of the monomer conversion increased as the concentration of the anionic surfactant [sodium dodecyl sulfate (SDS)] increased above its critical micelle concentration. However, the cationic surfactant (cetyltrimethylammonium bromide) reduced the rate considerably at higher concentrations, whereas the nonionic surfactant (TX‐100) had no effect on the rate. The effects of the Cr(VI), CH, AN, and H⁺ concentrations and the ionic strength on the rates were also examined. The presence of 0.015M SDS reduced the overall activation energy of the polymerization by 5.55 kcal/mol with respect to that in the absence of the surfactant. With increasing SDS concentration, the viscosity‐average molecular weight also increased. A suitable mechanistic scheme was proposed for the polymerization process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1147–1153, 2004     

Colloid‐Enhanced Ultrafiltration of Chlorophenols in Wastewater: Part IV. Effect of Added Salt on the Surfactant Leakage in Surfactant Solutions and Surfactant–Polymer Mixtures

Abstract

The critical aggregation concentration (cac) in surfactant–polymer mixtures approximates a lower limit to the surfactant concentration in the permeate (surfactant leakage) in polyelectrolyte micellar‐enhanced ultrafiltration. Here, the cac was measured at different salinities by using surface tension measurements. It was found that the cac increases slightly with the addition of simple salt, then the cac value decreases at higher salt concentration. The critical micelle concentration (CMC), which approximates surfactant leakage in micellar systems (no polymer), decreases monotonically with increasing salinity for ionic surfactants. The surfactant leakage in colloid‐enhanced ultrafiltration (CEUF) processes is investigated by using a dialysis method in the presence of three phenolic solutes with various degrees of chlorination: 2‐monochlorophenol (MCP), 2,4‐dichlorophenol (DCP), and 2,4,6‐trichlorophenol (TCP). Cetylpyridinium chloride (CPC) or n‐hexadecylpyridinium chloride is used as a cationic surfactant; and sodium poly(styrenesulfonate) (PSS) is used as an anionic polyelectrolyte. The effect of salinity and type of colloid is focused on here. In the absence of added salt, the cac can be over an order of magnitude less than the CMC, as can be surfactant leakage with added polymer. The added salt reduces the surfactant leakage in the micellar solution due to CMC reduction in the presence of electrolyte. In the surfactant–polymer mixture, the surfactant leakage is dramatically affected by salinity.     

Permeability changes caused by surfactants in liposomes that model the stratum corneum lipid composition

The alterations caused by different surfactants in the permeability of liposomes formed by a lipid mixture that models the stratum corneum (SC) composition (40% ceramides, 25% cholesterol, 25% palmitic acid, and 10% cholesteryl sulfate) were investigated. The surfactant/lipid molar ratios (Re) and the bilayer/aqueous phase surfactant partition coefficients (K) were determined at two sublytic levels. The selected surfactant were sodium dodecyl sulfate (SDS); sodium dodecyl ether sulfate (SDES) to assess the influence of the ethylene oxide groups on the anionic surfactant’s behavior; Triton X-100 (OP-10EO) and dodecyl betaine (D-Bet) as representatives of nonionic and amphoteric surfactants. Permeability alterations were determined by monitoring the increase in the fluorescence intensity of liposomes due to the 5(6) carboxyfluorescein (CF) released from the interior of vesicles. The SC liposomes/surfactant sublytic interactions were mainly ruled by the action of surfactant monomers. OP-10EO showed the highest ability to alter the permeability of bilayers and the highest affinity with these structures, whereas D-Bet showed the lowest tendencies. Although SDS and SDES exhibited similar activity at 50% CF release (similar Re values), SDES appeared to be more active at 100% CF release, its affinity with bilayers being also increased. The different ability exhibited by SDS, SDES, and D-Bet (same alkyl chainlength) to alter the permeability of SC liposomes emphasizes the role played by the polar part of these surfactants in this interaction. Different trends in the evolution of Re and K were observed when comparing the results with those reported for phosphatidylcholine (PC) liposomes. Thus, whereas SC liposomes appeared to be more resistant to the action of surfactants, the surfactant affinity with SC bilayers was always greater than that reported for PC bilayers.     

Emulsion polymerization of styrene: Simulation the effects of mixed ionic and non-ionic surfactant system in the presence of coagulation

A detailed model was developed for emulsion polymerization of styrene in batch reactor to predict the evolution of the product particle size distribution. The effect of binary surfactant systems (ionic/non-ionic surfactants) with different compositions was studied. The zero–one kinetics was employed for the nucleation rate, with the model comprising a set of rigorously developed population balance equations. The modeling incorporated particle formation by both nucleation and coagulation phenomena. The partial differential equations describing the particle population were discretized using finite volume elements. Binary surfactant systems, comprising sodium dodecyl sulfate (SDS) as anionic, and a commercial polyether polyol (Brij35^®) as non-ionic surfactants, were examined with different mass ratios. Increasing non-ionic surfactant mass fraction in binary surfactant system showed the decrease of particle number due to intensifying the coagulation between particles. Broader particle size distributions with greater average particle size were obtained with non-ionic surfactant comparing those obtained with anionic one.     

Experimental Study of CMC Evaluation in Single and Mixed Surfactant Systems, Using the UV–Vis Spectroscopic Method

In this study, the critical micellar concentration (CMC) of anionic, cationic and nonionic surfactants was determined using the UV–Vis spectroscopic method. Sodium lauryl sulfate (SDS) as anionic, hexadecyl-trimethyl-ammonium bromide as cationic, tert-octylphenol ethoxylates TOPEON (with N = 9.5, 7.5 and 35) and lauryl alcohol ethoxylate (23EO) as nonionic surfactants have been used. Concentration of surfactants varies both from below and above the CMC value in the pyrene solution. In addition, the amount of the CMC was determined using the values from the data obtained from the graph of absorbance versus concentration of surfactants. A comparative study was conducted between the results of the present study and the literature which shows a good agreement, in particular for TOPEO9.5 and LAEO23. Furthermore, the CMC value of SDS (as an ionic surfactant) in the presence of nonionic surfactants was also examined. The result reveals that with addition of small amount of nonionic surfactant to the anionic SDS surfactant, a decline in the CMC value of the anionic–nonionic system relative to the CMC of pure anionic surfactant was observed. In addition and for the first time, the effect of UV irradiation on the size of the micelle formations was studied. It was found that UV irradiation causes the formation of smaller micelles which is of prime concern in membrane technology.     

Spectroscopic and conductometric studies on the interactions of thionine with anionic and nonionic surfactants

In this study, the interaction of thionine, a cationic dye, with anionic [sodium dodecyl sulphate (SDS), lithium dodecyl sulphate (LiDS), and sodium dodecylbenzene sulphonate (SDBS)], nonionic (Tween 20 and Triton X‐100), and binary mixtures of anionic and nonionic surfactants was studied by conductometric and spectrophotometric measurements. The degree of ionisation, the counterion binding parameters, and the equilibrium constants in the premicellar region were obtained from conductivity data. Binding constants of thionine to anionic, nonionic, and mixtures of anionic and nonionic micelles were determined by spectrophotometric measurements. The binding tendency of thionine to anionic micelles followed the order SDBS > SDS > LiDS. The presence of nonionic surfactants increased significantly the binding affinity of thionine to anionic micelles, and the highest binding constant was calculated in the presence of Tween 20. The results obtained from conductometric studies correlated with those obtained from spectroscopic studies. Data concerning dye–surfactant interaction are important for a fundamental understanding of the performance of single and mixed surfactants and for their industrial application.     

Advanced synthesis for monodisperse polymer nanoparticles in aqueous media with sub-millimolar surfactants

Highly monodisperse polystyrene nanoparticles with mean diameters of less than 100 nm are synthesized via aqueous emulsion polymerization using an amphoteric initiator (VA-057) in the presence of sub-millimolar concentrations of anionic surfactant. Since the net charge on the initiator is almost zero at neutral pH, the resultant latex particle size is mainly determined by surfactant adsorption. Polymerizations were performed in the presence of a range of anionic surfactants with differing critical micelle concentrations (CMC) by varying the concentrations of surfactant, initiator and monomer, and also the ionic strength. Sodium dodecyl benzene sulfonate (SDBS), sodium hexadecyl sulfate (SHS), and sodium octadecyl sulfate (SOS) have relatively low CMCs and so enable formation of highly monodisperse nanoparticles at relatively low (sub-millimolar) surfactant concentrations, C_S (i.e. below the CMC in each case). Empirically, it was found that the particle number, N_p, and coefficient of variation of the particle size, C_V, were strongly dependent on the C_S/CMC ratio: N_p increased almost in proportion with the square of this ratio, while the C_V exhibited a minimum at approximately C_S/CMC = 0.20. Higher ionic strength reduced the particle size, which is consistent with the above relationship because the addition of salt lowers the CMCs of ionic surfactants. Polymer latex particles produced using such formulations form highly regular, close-packed colloidal arrays.