Graft copolymerization of methacrylic acid onto guar gum,using potassium persulfate as an initiator

Graft copolymerization of methacrylic acid (MAA) onto guar gum (GG) was carried out by free radical initiation mechanism by using potassium persulfate (PPS) as an initiator. It was found that % grafting, grafting efficiency, and % conversion were all dependent on the concentration of PPS, MAA, reaction temperature, and reaction time. Using PPS, the maximum % grafting was ascertained to be 241 at the optimum conditions of 60°C reaction temperature, 3 h of reaction time, 1.1 mmol of PPS, and 0.058 mol of MAA. Plausible mechanism for grafting reaction was suggested. The graft copolymer formed was characterized by Fourier transform infrared and differential scanning calorimetry. The graft copolymer formed could find applications in drug delivery. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 618–623, 2006     

Graft copolymerization of vinyl monomers onto silk fibers initiated by a semiconductor‐based photocatalyst

Graft copolymerization onto silk (Bombyx mori) was carried out with vinyl monomers (methyl methacrylate and acrylamide) and initiated by a semiconductor‐based photocatalyst (cadmium sulfide). The utility of a semiconductor as an initiator in free‐radical photografting and the effects of ethylene glycol and triethylamine with cadmium sulfide on graft copolymerization were explored. Depending on the reaction conditions, 10–48% grafting with methyl methacrylate and 4–26% grafting with acrylamide were achieved. The reaction conditions were optimized, and the grafted fibers were characterized with scanning electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetry analysis, and tensile strength measurements. The chemical resistance and water absorption of the grafted fibers were compared with those ungrafted fibers. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Graft copolymerization of acrylic acid onto methylcellulose by potassium permanganate‐p‐xylene redox pair

Poly(acrylic acid) was grafted onto methylcellulose in aqueous media by a potassium permanganate‐p‐xylene redox pair. Within the concentration range from 0.93 × 10^?3 to 9.33 × 10^?3M, p‐xylene, the graft copolymerization reaction exhibited minimum and maximum graft yields and was associated with two precursor‐initiating species, a p‐xylyl radical and its diradical derivative. The efficiency of the graft was low, not higher than 12.9% at a p‐xylene concentration of 0.93 × 10^?3M and suggested the dominance of a competitive homopolymerization reaction under homogeneous conditions. The effect of permanganate on the graft yield was normal and optimal at 135% graft yield, corresponding to a concentration of the latter of 33.3 × 10^?3M over the range from 8.3 × 10^?3 to 66.7 × 10^?3M. The conversion in graft yield showed a negative dependence on temperature in the range 30–60°C and suggested a preponderance of high activation energy transfer reaction processes. The calculated composite activation energy for the graft copolymerization was 7.6 kcal/mol. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 278–281, 2004     

Graft copolymerization of styrene onto casein initiated by potassium diperiodatonickelate (IV) in alkaline medium

A novel redox system, potassium diperiodatonickelate (Ni(IV))‐casein is used to initiate graft copolymerization of Styrene onto casein under different conditions in aqueous alkaline solution. Graft copolymers with both high grafting efficiency (>98%) and percentage of grafting(>300%) are obtained, which indicated that (Ni(IV))‐casein redox pair is an efficient initiator for this grafting. The effects of reaction parameters, such as monomer‐to‐casein weight ratio, initiator concentration, pH, time, and temperature, are investigated. A tentative initiation mechanism is proposed. The structures and properties of the graft copolymer are characterized by Fourier transform infrared Spectroscopy, X‐ray diffraction diagrams, and Scanning Electron Microscope. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4247–4251, 2006     

Graft copolymerization of N‐vinyl‐2‐pyrrolidone onto sodium carboxymethylcellulose with azobisisobutyronitrile as the initiator

Graft copolymers of sodium carboxymethylcellulose with N‐vinyl‐2‐pyrrolidone were prepared in aqueous solutions with azobisisobutyronitrile as the initiator. The graft copolymers [sodium carboxymethylcellulose‐g‐poly(N‐vinyl‐2‐pyrrolidone)] were characterized with Fourier transform infrared spectroscopy, elemental analysis, nuclear magnetic resonance spectroscopy, differential scanning calorimetry, and scanning electron microscopy. The grafting parameters, including the graft yield of the graft copolymer and the grafting efficiency of the reaction, were evaluated comparatively. The effects of reaction variables such as the time, temperature, and monomer and initiator concentrations on these parameters were studied. The graft yield and grafting efficiency increased and then decreased with increasing concentrations of N‐vinyl‐2‐pyrrolidone and azobisisobutyronitrile and increasing polymerization temperatures. The optimum temperature and polymerization time were 70°C and 4.30 h, respectively. Further changes in the properties of grafted sodium carboxymethylcellulose, such as the intrinsic viscosity, were determined. The overall activation energy for the grafting was also calculated to be 10.5 kcal/mol. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 936–943, 2007     

Graft copolymerization of acrylonitrile onto allylated caesarweed fibres by ceric ion in the presence of 2‐mercaptoethanol

Polyacrylonitrile was grafted onto caesarweed fibers and on the allyldervative in aqueous media by ceric ion‐2‐mercaptoethanol redox pair. The allylfibre was obtained by treatment of caesarweed fibers with sodium hydroxide followed by allylchloride in diisoproylether to yield an average degree of substitution of 3.24 allyl moieties per anhydroglucose unit (AGU). The graft yield dependence on 2‐mercaptoethanol concentration, in the range, 10.7–64.0 × 10^?4M was characterized by a minimum followed by an enhanced yield. This suggested the existence of two initiating species, a thioglycol radical and mercaptoethoxyl radical. A fivefold increase in the concentration of 2‐mercaptoethanol was accompanied by reduction in the frequency of graft, F_g from 75.6–0.79 Ng/10⁴ AGU and a concomitant increase, by two orders of magnitude, in the average molecular weight of grafted polymer M_v, with values of up to 11.78 × 10⁵. Infrared spectroscopy of allylfibre‐g‐polyacrylonitrile copolymer showed evidence of radical coupling reaction involving thioglycol radical species and allylic macroradicals of the allylfibre. The unmodified fiber was more reactive than the allylfibre by as much as a factor of 2, and was ascribed to resonance stabilization of allylic macro radicals derived from the latter. For the allyl fiber, a 150% increase in monomer concentration resulted in nominal increase in graft yield, not higher than 7%. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Graft polymerization of vinyl acetate onto granular starch: Comparison on the potassium persulfate and ceric ammonium nitrate initiated system

This work was undertaken to discuss in depth the vital differences in the morphological development during synthesis, and properties of starch‐g‐poly‐(vinyl acetate) copolymers using two different initiators, potassium persulfate (KPS) and ceric ammonium nitrate (CAN). KPS‐initiated system gave relatively low values of grafting ratio and grafting efficiency, indicating a great tendency for the formation of poly(vinyl acetate) homopolymer (PVAc). Yet, higher values were seen for the CAN‐initiated system. Transmission electron microscope observations indicated a relatively broad distribution of latex particles for the KPS‐initiated system. The surface potential of latex particles was about ?3.5 mV, which turned out to be insufficient to maintain stability of latex particles. On the other hand, a uniform particle size distribution was found for the CAN‐initiated system, as the surface potential of latex particles was 21.5 mV. Moreover, radicals on starch molecules were generated directly through a redox reaction with positively charged ceric ion. The hydrophobic PVAc chains were thus grafted on starch, resulting in an amphiphilic graft copolymer, which provides a sufficient stabilization degree as a role of surfactant to render a relatively uniform distribution of latex particles. The synthesized starch‐g‐poly(vinyl acetate) copolymers were further converted to starch‐g‐poly(vinyl alcohol) through saponification, which were subjected to evaluations regarding the biodegradation and cell culture capability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3017–3027, 2006     

Graft copolymerization of methyl acrylate onto poly(vinyl alcohol) initiated by potassium diperiodatonickelate(IV)

The graft copolymerization of methyl acrylate onto poly(vinyl alcohol) (PVA) with a potassium diperiodatonickelate(IV) [Ni(IV)]–PVA redox system as an initiator was investigated in an alkaline medium. The grafting parameters were determined as functions of the temperature and the concentrations of the monomer and initiator. The structures of the graft copolymers were confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, differential scanning calorimetry, and thermogravimetric analysis. The Ni(IV)–PVA system was found to be an efficient redox initiator for this graft copolymerization. A single‐electron‐transfer mechanism was proposed for the formation of radicals and the initiation. Other acrylate monomers, such as methyl methacrylate, ethyl acrylate, n‐butyl acrylate, and n‐butyl methacrylate, were used as reductants for graft copolymerization. These reactions definitely occurred to some degree. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 529–534, 2003     

Graft copolymerization of oleic acid onto low‐density polyethylene in the molten state

A graft copolymer of oleic acid (OA) onto low‐density polyethylene (LDPE) was prepared using dicumyl peroxide (DCP) as an initiator in the molten state. The grafting was carried out in a Haake rheometer. The effects of the reaction time and the amount of DCP and the monomer on the percentage of grafting were studied. The rheological behavior and the melt‐flow rate of the graft copolymer (LDPE‐g‐OA) were also investigated. FTIR spectroscopy and a mass spectrum were used to characterize the structure of LDPE‐g‐OA. The experimental results showed that when the OA amount was 10 wt % and the DCP amount was 0.4 wt % based on the LDPE the percentage of grafting of LDPE‐g‐OA, prepared by maintaining the temperature at 170°C and the roller speed at 80 rpm, was about 6 wt %. It was found that both LDPE and LDPE‐g‐OA were pseudoplastic fluids. OA was grafted onto LDPE in the form of a monomer and a dimer. The grafted LDPE is expected to act as a compatibilizer between starch and polyethylene. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3299–3304, 2003     

Graft copolymerization onto Tamarind Kernel Powder: Ceric(IV)‐initiated graft copolymerization of acrylonitrile

Tamarind Kernel Powder (TKP) is derived from the seeds of Tamarindus indica Linn., a common and most important tree of India. It is extensively used in cotton sizing, as a wet‐end additive in the paper industry, as a thickening, stabilizing, and gelling agent in the food industry. However, because of its fast biodegradability there is a need to prepare graft copolymers of TKP. The graft copolymerization of acrylonitrile (AN) onto TKP with ceric ammonium nitrate as a redox initiator in an aqueous medium has been studied. The reaction conditions were optimized to afford maximum percent grafting and percentage grafting efficiency of AN onto TKP, which was found to be 86% and 64%, respectively. Fourier Transform Infrared Spectrum of the grafted products showed an additional sharp absorption band at 2244 cm^?1 due to ? C?N stretching, thereby confirming the grafting of AN onto TKP. Scanning electron microscopy studies indicated change in contour of the polysaccharide on grafting and the thick polymeric coating of AN on the surface alongwith grafting of AN such that all the gap between polysaccharide particles have been closed. Thermal studies using thermogravimetric and differential gravimetric analyses confirmed that TKP‐g‐AN has overall high thermal stability than pure TKP. Reaction mechanism of grafting of acrylnitrile onto TKP is also proposed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Grafting of methyl methacrylate onto sodium alginate initiated by potassium ditelluratoargentate(III)

Sodium alginate (SA) was graft‐copolymerized with methyl methacrylate in an alkali aqueous solution with potassium ditelluratoargentate(III) (DTA) as the initiator. Graft copolymers with both a high grafting efficiency (>90%) and a high percentage of grafting were obtained, which indicated that the DTA–SA redox pair was an efficient initiator for this grafting. The grafting parameters, including total conversion, grafting efficiency, and percentage grafting, were evaluated comparatively. The dependence of these parameters on temperature and time, monomer concentration, initiator concentration, and SA backbone concentration was also investigated. The overall activation energy of this grafting was calculated as 37.50 kJ/mol. Proof of grafting was obtained from gravimetric analysis and IR spectra. A tentative mechanism involving a two‐step, single‐electron‐transfer process of DTA is proposed to explain the generation of radicals and the initiation of grafting. Some basic properties of the grafted copolymer were studied by instrumental analyses, including thermogravimetry, X‐ray diffraction, and scanning electron microscopy. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1688–1694, 2005     

Synthesis and characterization of the novel block copolymer poly(ε‐caprolactone)‐b‐poly(4‐vinyl pyridine) by the combination of coordination and controlled free‐radical polymerizations

A novel block copolymer, poly(ε‐caprolactone)‐b‐poly(4‐vinyl pyridine), was synthesized with a bifunctional initiator strategy. Poly(ε‐caprolactone) prepolymer with a 2,2,6,6‐tetramethylpiperidinyloxy (TEMPO) end group (PCL_T) was first obtained by coordination polymerization, which showed a controlled mechanism in the process. By means of ultraviolet spectroscopy and electron spin resonance spectroscopy, the TEMPO moiety was determined to be intact in the polymerization. The copolymers were then obtained by the controlled radical polymerization of 4‐vinyl pyridine in the presence of PCL_T. The desired block copolymers were characterized by gel permeation chromatography, Fourier transform infrared spectroscopy, and NMR spectroscopy in detail. Also, the effects of the molecular weight and concentration of PCL_T on the copolymerization were investigated. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2280–2285, 2004     

Graft copolymerization of acrylic acid onto cocoyam starch by ceric ion in the presence of N,N′‐dimethylacetamide

Grafting of acrylic acid onto cocoyam starch, Xanthosoma sagittitolium was initiated by ceric ion—N,N′‐dimethylacetamide redox pair in aqueous media. The reaction was characterized by high graft yields of up to 676%, and infrared spectroscopy affirmed the presence of grafted polymer. Graft yield was enhanced by N,N′‐dimethylacetamide (DMAc) in the concentration range, 9.0–36.0 × 10^?4M but lower concentrations were more favorable with the ratio of percentage graft, P_g/P_g0, in the presence and absence of DMAc respectively, of up to 1.34 at 9.0 × 10^?4M of the latter. Ceric ion was nonterminating of the graft reaction and a 10‐fold increase in its concentration of 4.16 × 10^?3M resulted in high efficiency of graft of 50.2% in monomer conversion to grafted polymer. Enhanced homopolymer formation and low efficiency of graft were observed at monomer concentration greater than 0.69M. Long reaction time, greater than 30 min, was unfavorable to the graft reaction and the latter showed negative dependence on temperature in the range, 30–50°C. At 30‐min reaction time, the graft yield at 50°C was not more than 70% of the corresponding value at 30°C. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Graft copolymerization of methyl acrylate onto poly(vinyl alcohol) initiated by potassium diperiodatoargentate(III)

The graft copolymerization of methyl acrylate onto poly(vinyl alcohol) (PVA) using potassium diperiodatoargentate(III) [Ag(III)]–PVA redox system as initiator was studied in an alkaline medium. Some structural features and properties of the graft copolymer were confirmed by Fourier‐transfer infrared spectroscopy, scanning electron microscope, X‐ray diffraction and thermogravimetric analysis. The grafting parameters were determined as a function of concentrations of monomer, initiator, macromolecular backbone (X?_n = 1750, M? = 80 000 g mol^?1), reaction temperature and reaction time. A mechanism based on two single‐electron transfer steps is proposed to explain the formation of radicals and the initiation profile. Other acrylate monomers, such as methyl methacrylate, ethyl acrylate and n‐butyl acrylate, were also used to produce graft copolymerizations. It has been confirmed that grafting occurred to some degree. Thermogravimetric analysis was performed in a study of the moisture resistance of the graft copolymer. Copyright © 2004 Society of Chemical Industry     

Graft copolymerization of thiophene onto polystyrene synthesized via nitroxide‐mediated polymerization and its polymer − clay nanocomposite

A new strategy for graft copolymerization of thiophene onto a polystyrene (PSt) backbone by a multi‐step process is suggested and the effects of an organoclay on the final properties of the graft copolymer sample are described. For this purpose, first poly(styrene‐co‐4‐chloromethyl styrene) [P(St‐co‐CMSt)] was synthesized via nitroxide‐mediated polymerization. Afterwards, the chlorine groups of P(St‐co‐CMSt) were converted to thiophene groups using the Kumada cross‐coupling reaction and thiophene‐functionalized PSt multicenter macromonomer (ThPStM) was synthesized. The graft copolymerization of thiophene monomers onto PSt was initiated by oxidized thiophene groups in the PSt chains after addition of ferric chloride (FeCl₃), an oxidative catalyst for polythiophene synthesis, and FeCl₃‐doped polythiophene was chemically grafted onto PSt chains via oxidation polymerization. The graft copolymer obtained was characterized by ¹H NMR and Fourier transform infrared spectroscopy, and its electroactivity behavior was verified under cyclic voltammetric conditions. Finally, PSt‐g‐PTh/montmorillonite nanocomposite was prepared by a solution intercalation method. The level of dispersion of organoclay and the microstructure of the resulting nanocomposite were probed by means of XRD and transmission electron microscopy. It was found that the addition of only a small amount of organoclay (5 wt%) was enough to improve the thermal stabilities of the nanocomposite.© 2013 Society of Chemical Industry     

Grafting of acrylonitrile onto allylated caesarweed fibers by potassium permanganate – N,N′‐dimethylacetamide redox pair

Caesarweed fiber, Urena lobata, was modified by successive treatment with sodium hydroxide and allylchloride in diethylether to yield an average degree of substitution of 2.73 allyl moieties per anhydroglucose unit. The presence of allyl moieties on the fiber was confirmed by infrared spectroscopy. Graft copolymerization of acrylonitrile onto the unmodified and allyl‐modified fibers was initiated by potassium permanganate –N,N′‐dimethylacetamide redox pair in aqueous medium. The allyl fiber was markedly less reactive than the unmodified fiber with graft yields for the latter a factor of 2.3 higher than those of the former. This was attributed to resonance stabilization of allylic macroradicals of the fiber. The graft yield showed positive dependence on N,N′‐dimethylacetamide concentration in the range, 9.0–45.0 × 10^?4M with P_g/P_go of up to 1.39 at the highest concentration. The conversion in graft yield was however characterized by a plateau at the latter concentration and was ascribed to termination of grafted polymer chains by methylacetylaminomethyl radical initiating species. Spectroscopic evidence in support of the latter was the absorption peak at 1680 cm^?1 for the graft copolymers, characteristic of C?O stretching vibration for tertiary amide. Acetic acid, at concentrations in the range 0.28–2.22M, was inimical to grafting of acrylonitrile onto allylfibre with P_g/P_go, of less than one. Grafting onto allylfiber showed positive temperature dependence in the range, 30–50°C with calculated activation energy of 12.3 kcal mol^?1 for the graft polymerization reaction. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Graft copolymerization of methyl methacrylate onto oil palm empty fruit bunch fiber using H2O2/Fe2+ as an initiator

Graft copolymerization of methyl methacrylate (MMA) onto oil palm empty fruit bunch fiber (OPEFB) was successfully carried out in aqueous medium using hydrogen peroxide as an initiator. Results from the investigation of the optimum conditions for grafting are presented. Maximum percentage of grafting was achieved when the amount of initiator, cocatalyst, and nitric acid were 5.877 × 10^?3 mol, 2.63 × 10^?4 mol, and 3.24 × 10^?3 mol, respectively. The optimum reaction temperature was 50°C and the reaction period was 120 min. The highest percentage of grafting and grafting efficiency were 220 and 47%, respectively, under optimum conditions. The grafted copolymer was characterized by FTIR spectroscopy and scanning electron microscopy. The presence of a band at 1730 cm^?1 provides strong evidence of grafting. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2233–2238, 2003     

Radical polymerization of vinyl monomers in the presence of carbon black initiated by 2,2'‐azobisisobutyronitrile and benzoyl peroxide in ionic liquid

The radical polymerization behavior of vinyl monomers, such as styrene, methyl methacrylate (MMA), and vinyl acetate (VAc), in the presence of carbon black initiated by benzoyl peroxide (BPO) and 2,2'‐azobisisobutyronitrile (AIBN) in ionic liquid (IL) was compared with those in toluene. 1‐Butyl‐3‐methylimidazolium hexafluorophosphate was used as IL. The radical polymerization of vinyl monomers initiated by BPO and AIBN in the presence of carbon black was remarkably retarded in toluene. On the contrary, the retardation of the polymerization by carbon black was considerably reduced in IL. During the radical polymerization in the presence of carbon black, a part of polymer formed was grafted onto carbon black surface based on the termination reaction of the growing polymer radicals with carbon black surface. The percentage of grafting and molecular weight of polymer in IL were much higher than those in toluene. This may be due to the fact that lifetime of the growing polymer radical is prolonged because of high viscosity of IL. Therefore, the growing polymer radicals with higher molecular weight were trapped by carbon black surface, because of stabilization of polymer radicals. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008