Synthesis,characterization, conductivity,band gap,and kinetic of thermal degradation of poly‐4‐[(2‐mercaptophenyl) imino methyl] phenol

The oxidative polycondensation reaction conditions of 4‐[(2‐mercaptophenyl) imino methyl] phenol (2‐MPIMP) were studied in an aqueous acidic medium between 40 and 90°C by using oxidants such as air, H₂O₂, and NaOCl. The structures of the synthesized monomer and polymer were confirmed by FTIR, ¹H NMR, ¹³C NMR, and elemental analysis. The characterization was made by TGA‐DTA, size exclusion chromatography (SEC) and solubility tests. At the optimum reaction conditions, the yield of poly‐4‐[(2‐mercaptophenyl) imino methyl]phenol (P‐2‐MPIMP) was found to be 92% for NaOCl oxidant, 84% for H₂O₂ oxidant 54% for air oxidant. According to the SEC analysis, the number‐average molecular weight (M_n), weight‐average molecular weight (M_w), and polydispersity index values of P‐2‐MPIMP were found to be 1700 g mol^?1, 1900 g mol^?1, and 1.118, using H₂O₂; 3100 g mol^?1, 3400 g mol^?1, and 1.097, using air; and 6750 g mol^?1, 6900 g mol^?1, and 1.022, using NaOCl, respectively. According to TG analysis, the weight losses of 2‐MPIMP and P‐2‐MPIMP were found to be 95.93% and 76.41% at 1000°C, respectively. P‐2‐MPIMP showed higher stability against thermal decomposition. Also, electrical conductivity of the P‐2‐MPIMP was measured, showing that the polymer is a typical semiconductor. The highest occupied molecular orbital, the lowest unoccupied molecular orbital, and the electrochemical energy gaps (E′_g) of 2‐MPIMP and P‐2‐MPIMP were found to be ?6.13, ?6.09; ?2.65, ?2.67; and 3.48, 3.42 eV, respectively. Kinetic and thermodynamic parameters of these compounds investigated by MacCallum‐Tanner and van Krevelen methods. The values of the apparent activation energies of thermal decomposition (E_a), the reaction order (n), pre‐exponential factor (A), the entropy change (ΔS*), enthalpy change (ΔH*), and free energy change (ΔG*) were calculated from the TGA curves of compounds. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis,characterization, and antimicrobial properties of oligo‐4‐[(pyridine‐3‐yl‐methylene) amino] phenol

The oxidative polycondensation reaction conditions of 4‐[(pyridine‐3‐yl‐methylene) amino]phenol (4‐PMAP) were studied using H₂O₂, atmospheric O₂, and NaOCl oxidants in an aqueous alkaline medium between 30°C and 90°C. Synthesized oligo‐4‐[(pyridine‐3‐yl‐methylene) amino] phenol (O‐4‐PMAP) was characterized by ¹H‐, ¹³C NMR, FTIR, UV–vis, size exclusion chromatography (SEC), and elemental analysis techniques. The yield of O‐4‐PMAP was found to be 32% (for H₂O₂ oxidant), 68% (for atmospheric O₂ oxidant), and 82% (for NaOCl oxidant). According to the SEC analysis, the number–average molecular weight, weight–average molecular weight, and polydispersity index values of O‐4‐PMAP was found to be 5767, 6646 g mol^?1, and 1.152, respectively, using H₂O₂, and 4540, 5139 g mol^?1, and 1.132, respectively, using atmospheric O₂, and 9037, 9235 g mol^?1, and 1.022, using NaOCl, respectively. According to TG and DSC analyses, O‐4‐PMAP was more stable than 4‐PMAP against thermal decomposition. The weight loss of O‐4‐PMAP was found to be 94.80% at 1000°C. Also, antimicrobial activities of the oligomer were tested against B. cereus, L. monocytogenes, B. megaterium, B. subtilis, E. coli, Str. thermophilus, M. smegmatis, B. brevis, E. aeroginesa, P. vulgaris, M. luteus, S. aureus, and B. jeoreseens. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3327–3333, 2006     

Synthesis,characterization, and thermal degradation of oligo‐2‐(morpholinoiminomethyl)phenol and its Pb(II) complex compound

The oxidative polycondensation reaction conditions of 2‐(morpholinoiminomethyl)phenol were studied with H₂O₂, air O₂, and sodium hypochloride (NaOCl) oxidants in an aqueous alkaline medium between 40 and 90°C. The structure of oligo‐2‐(morpholinoiminomethyl)phenol was characterized with ¹H‐ and ¹³C‐NMR, Fourier transform infrared, ultraviolet–visible, size exclusion chromatography, and elemental analysis techniques. Under the optimum reaction conditions, the yield of oligo‐2‐(morpholinoiminomethyl)phenol was 28% for the H₂O₂ oxidant, 12% for the air O₂ oxidant, and 58% for the NaOCl oxidant. According to the size exclusion chromatography analysis, the number‐average molecular weight, weight‐average molecular weight, and polydispersity index of oligo‐2‐(morpholinoiminomethyl)phenol were 2420 g/mol, 2740 g/mol, and 1.187 with H₂O₂, 1425 g/mol, 2060 g/mol, and 1.446 with air O₂, and 1309 g/mol, 1401 g/mol, and 1.070 with NaOCl, respectively. Thermogravimetry/dynamic thermal analysis showed that the oligo‐2‐(morpholinoiminomethyl)phenol–lead complex compound was more stable than 2‐(morpholinoiminomethyl)phenol and oligo‐2‐(morpholinoiminomethyl)phenol against thermal degradation. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:3795–3804, 2006     

Synthesis of oligo‐ortho‐azomethinephenol and its oligomer–metal complexes: Characterization and application as anti‐microbial agents

The oxidative polycondensation reaction conditions and optimum parameters of o‐phenylazomethinephenol (PAP) with oxygen (air) and NaOCl were determined in an aqueous alkaline solution at 60–98°C. The properties of oligo‐o‐phenylazomethinephenol (OPAP) were studied by chemical and spectra analyses. PAP was converted to dimers and trimers (25–60%) by oxidation in an aqueous alkaline medium. The number average molecular weight (M_n), mass average molecular weight (M_w), and polydispersity index (PDI) values were 1180 g mol^?1, 1930 g mol^?1, and 1.64, respectively. According to these values, 20–33% of PAP turned into OPAP. During the polycondensation reaction, a part of the azomethine (? CH?N? ) groups oxidized to carboxylic (? COOH) group. Thus, a water‐soluble fraction of OPAP was incorporated in the carboxylic (? COOH); (2–20%) group. Also, the structure and properties of oligomer–metal complexes of OPAP with Cu(II), Ni(II), Zn(II), and Co(II) were studied. Antimicrobial activites of the oligomer and its oligomer–metal complexes were tested against B. cereus, L. monocytogenes, B. megaterium, B. subtilis, E. coli, Str. thermophilus, M. smegmatis, B. brevis, E. aeroginesa, P. vulgaris, M. luteus, S. aureus, and B. jeoreseens. Also, according to differential thermal analysis and thermogravimetric analysis, OPAP and its oligomer–metal complexes were stable throughout to temperature and thermo‐oxidative decomposition. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2004–2013, 2002     

Poly‐2‐[(4‐methylbenzylidene)amino]phenol: Investigation of thermal degradation and antimicrobial properties

A new polyphenol (poly‐2‐[(4‐methylbenzylidene)amino]phenol) (P(2‐MBAP)) containing an azomethine group was synthesized by oxidative polycondensation reaction of 2‐[(4‐methylbenzylidene)amino]phenol (2‐MBAP) with NaOCl, H₂O₂, and O₂ oxidants in an aqueous alkaline medium. The structures of 2‐MBAP and P(2‐MBAP) were characterized by UV‐vis, FT‐IR, and ¹H NMR spectra. While the monomer decomposed completely up to 350°C and 57.2% of the polymer decomposed up to 1000°C. The thermal degradation of P(2‐MBAP) was also supported by the Thermo‐IR spectra recorded in the temperature range of 25–800°C. Electrical conductivity of the polymer was observed to increase 10⁸ fold after doping with I₂. Antimicrobial activities of the P(2‐MBAP) and 2‐MBAP against Sarcina lutea, Enterobacter aerogenes, Escherichia coli, Enterococcus feacalis, Klebsiella pneumoniae, Bacillus subtilis, Candida albicans, and Saccharomyces cerevisiae were also investigated. The number average molecular weight (M_n), weight average molecular weight (M_w) and polydispersity index (PDI) of the polymers were determined by gel permeation chromatography (GPC). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41758.     

Kinetics of thermal degradation studies of some new terpolymers derived from 2,4‐dihydroxypropiophenone,oxamide, and formaldehyde

The terpolymers (2,4‐DHPOF) have been synthesized by the condensation of 2,4‐dihydroxypropiophenone with oxamide and formaldehyde in the presence of 2M HCl as catalyst with varying proportions of reactants. Terpolymer composition has been determined on the basis of their elemental analysis. The terpolymer has been characterized by UV‐visible, IR, and ¹H NMR spectra. The thermal decomposition behavior of some new terpolymers was studied using thermogravimetric analysis in air atmosphere at heating rate of 10°C/min. Thermal decomposition curves are discussed with careful attention to minute details. The Freeman–Carroll and Sharp–Wentworth methods have been used to calculate activation energy and thermal stability. Thermal activation energy (E_a) calculated with the help of these methods are in agreement with each other. Thermodynamic parameters such as free energy change (ΔF), entropy change (ΔS), apparent entropy change (S*), and frequency factor (z) are also determined on the basis of the TG curves and by using data of the Freeman–Carroll method. The Freidman method evaluated the variation in the apparent activation energy changes by isoconversional (model‐free) kinetic methods. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Isoconversional and thermal methods of kinetic analysis of 2,4‐dihydroxybenzophenone copolymer resin

A copolymer (2,4‐DHBPOF) synthesized by the condensation of 2,4‐dihydroxybenzophenone and oxamide with formaldehyde in the presence of acid catalyst with varying the molar proportions of the reacting monomer. Composition of the copolymer has been determined by elemental analysis. The copolymer has been characterized by UV–visible, FTIR, and ¹H NMR spectroscopy. The morphology of synthesized copolymer was studied by scanning electron microscopy (SEM). The activation energy (E_a) and thermal stability calculated by using Sharp‐Wentworth, Freeman–Carroll, and Freidman's method. Thermogravimetric analysis (TGA) data were analyzed to estimate the characteristic thermal parameters. Freeman–Carroll and Sharp Wentworth methods have been used to calculate activation energy and thermal stability. The activation energy (E_a) calculated by using the Sharp‐Wentworth has been found to be in good agreement with that calculated by Freeman–Carroll method. Thermodynamic parameters such as free energy change (ΔF), entropy change (ΔS), apparent entropy change (S*), and frequency factor (Z) have also been evaluated based on the data of Freeman–Carroll method. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,Characterization, and Thermal Degradation of Oligo-2-[(4-Chlorophenyl) Imino Methylene] Phenol and Its Oligomer-Metal Complexes

The oxidative polycondensation reaction conditions of 2-[(4-chlorophenyl) imino methylene] phenol (CPIMP) were studied by air O₂ and NaOCl oxidants at various temperatures and times. Optimum reaction conditions of air O₂ and NaOCl were determined for CPIMP. Oligo-2-[(4-chlorophenyl) imino methylene] phenol (OCPIMP) was synthesized from the oxidative polycondensation of CPIMP with air O₂ and NaOCl in alkaline medium between 50 and 90°C. The number-average molecular weight (M_n) weight-average molecular weight (M_w) and polydispersity index (PDI) values of OCPIMP were found to be 470 g mol^?1, 895 g mol^?1, and 1.90, using NaOCl, and 455 g mol^?1, 765 g mol^?1, and 1.68, using air O₂, respectively. At the optimum reaction conditions, the yield of OCPIMP was found to be 62.80% (for air O₂ oxidant) and 87.50% (for NaOCl oxidant). The OCPIMP was characterized by ¹H-NMR, FT-IR, UV-Vis and elemental analysis. The thermogravimetric (TGA)-DTA analyses were shown to be stable of OCPIMP and its oligomer metal complexes (such as Co⁺², Ni⁺², and Cu⁺²) against thermo-oxidative decomposition. The weight loss of OCPIMP and its oligomer metal complexes (such as Co⁺², Ni⁺², and Cu⁺²) were found to be 98%, 85%, 80%, and 82%, respectively, at 1000°C.     

Cation‐exchange kinetics and electrical conductivity studies of an ‘organic‐inorganic’ composite cation‐exchanger: Polypyrrole Th(IV) phosphate

Polypyrrole Th(IV) phosphate, an electrically conducting ‘organic‐inorganic’ cation‐exchange composite material was prepared by the incorporation of an electrically conducting polymer, i.e., polypyrrole, into the matrix of a fibrous type inorganic cation‐exchanger thorium(IV) phosphate. The composite cation‐exchanger has been of interest because of its good ion‐exchange capacity, higher chemical and thermal stability, and high selectivity for heavy metal ions. The temperature dependence of electrical conductivity of this composite system with increasing temperatures was measured on compressed pellets by using four‐in‐line‐probe dc electrical conductivity measuring instrument. The conductivity values lie in the semiconducting region, i.e., in the order of 10^?6 to 10^?4 S cm^?1 that follow the Arrhenius equation. Nernst–Plank equation has been applied to determine some kinetic parameters such as self‐diffusion coefficient (D₀), energy of activation (E_a), and entropy of activation (ΔS*) for Mg(II), Ca(II), Sr(II), Ba(II), Ni(II), Cu(II), Mn(II), and Zn(II) exchange with H⁺ at different temperatures on this composite material. These results are useful for predicting the ion‐exchange process occurring on the surface of this cation‐exchanger. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis,characterization, and thermal stability of azomethine oligomer and its metal complexes

The oxidative polycondensation reaction conditions of N,N′‐bis[(2‐hydroxy‐1‐naphthyl)methylene]urea (2‐HNMU) has been accomplished using NaOCl, H₂O₂, and air O₂ oxidants in an aqueous alkaline medium. The structures of the obtained monomer and oligomer were confirmed by FTIR, UV–vis, ¹H NMR, ¹³C NMR, and elemental analysis. The characterization was made by TG‐DTA, size exclusion chromatography (SEC), and solubility tests. At the optimum reaction conditions, the yield of oligo‐N,N′‐bis[(2‐hydroxy‐1‐naphthyl)methylene]urea (O‐2‐HNMU) was found to be 95% (for air O₂ oxidant), 51% (for H₂O₂ oxidant), 96% (for NaOCl oxidant). According to the SEC analysis, the number‐average molecular weight (M_n), weight‐average molecular weight (M_w), and polydispersity index values of O‐2‐HNMU was found to be 1036, 1225 g/mol, and 1.182, respectively, using H₂O₂, and 765, 1080 g/mol, and 1.412, respectively, using air O₂, and 857, 1105 g/mol, and 1.289, respectively, using NaOCl. TG‐DTA analyses showed that O‐2‐HNMU was more stable than 2‐HNMU. According to TG analyses, the carbonaceous residue of 2‐HNMU and O‐2‐HNMU was found to be 0.49% and 2.11% at 1000°C, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synthesis,characterization, thermal stability,conductivity, and band gap of a new aromatic polyether containing an azomethine as a side

In this study, the oxidative polycondensation reaction conditions of 4‐[(4‐methylphenyl)iminomethyl]phenol (4‐MPIMP) were studied by using oxidants such as air O₂, H₂O₂, and NaOCl in an aqueous alkaline medium between 50 and 90°C. The structures of the synthesized monomer and polymer were confirmed by FTIR, UV–vis, ¹H–¹³C‐NMR, and elemental analysis. The characterization was made by TGA‐DTA, size exclusion chromatography (SEC), and solubility tests. At the optimum reaction conditions, the yield of poly‐4‐[(4‐methylphenyl)iminomethyl]phenol (P‐4‐MPIMP) was found to be 28% for air O₂ oxidant, 42% for H₂O₂ oxidant, and 62% for NaOCl oxidant. According to the SEC analysis, the number–average molecular weight (M_n), weight–average molecular weight (M_w), and polydispersity index values of P‐4‐MPIMP were found to be 4400 g mol^?1, 5100 g mol^?1, and 1.159, using H₂O₂, and 4650 g mol^?1, 5200 g mol^?1, and 1.118, using air O₂, and 5100 g mol^?1, 5900 g mol^?1, and 1.157, using NaOCl, respectively. According to TG analysis, the weight losses of 4‐MPIMP and P‐4‐MPIMP were found to be 85.37% and 72.19% at 1000°C, respectively. P‐4‐MPIMP showed higher stability against thermal decomposition. Also, electrical conductivity of the P‐4‐MPIMP was measured, showing that the polymer is a typical semiconductor. The highest occupied molecular orbital and the lowest unoccupied molecular orbital energy levels and electrochemical energy gaps (E) of 4‐MPIMP and P‐4‐MPIMP were found to be ?5.76, ?5.19; ?3.00, ?3.24; 2.76 and 1.95 eV, respectively. According to UV–vis measurements, optical band gaps (E_g) of 4‐MPIMP and P‐4‐MPIMP were found to be 3.34 and 2.82 eV, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Poly(2‐acrylamido glycolic acid‐co‐2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid): Synthesis,characterization, and retention properties for environmentally impacting metal ions

Poly(2‐acrylamido glycolic acid‐co‐2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid) [P(AGA‐co‐APSA)] was synthesized by radical polymerization in an aqueous solution. The water‐soluble polymer, containing secondary amide, hydroxyl, carboxylic, and sulfonic acid groups, was investigated, in view of their metal‐ion‐binding properties, as a polychelatogen with the liquid‐phase polymer‐based retention technique under different experimental conditions. The investigated metal ions were Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Cr³⁺, and these were studied at pHs 3, 5, and 7. P(AGA‐co‐APSA) showed efficient retention of all metal ions at the pHs studied, with a minimum of 60% for Co(II) at pH 3 and a maximum close to 100% at pH 7 for all metal ions. The maximum retention capacity (n metal ion/n polymer) ranged from 0.22 for Cd²⁺ to 0.34 for Ag⁺. The antibacterial activity of Ag⁺, Cu²⁺, Zn²⁺, and Cd²⁺ polymer–metal complexes was studied, and P(AGA‐co‐APSA)–Cd²⁺ presented selective antibacterial activity for Staphylococcus aureus with a minimum inhibitory concentration of 2 μg/mL. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Nonionic water‐soluble polymer: Preparation,characterization, and application of poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) as a polychelatogen

The free‐radical copolymerization of water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) was carried out with a feed monomer ratio of 75:25 mol %, and the total monomer concentration was 2.67M. The synthesis of the copolymer was carried out in dioxane at 70°C with benzoyl peroxide as the initiator. The copolymer composition was obtained with elemental analysis and ¹H‐NMR spectroscopy. The water‐soluble polymer was characterized with elemental analysis, Fourier transform infrared, ¹H‐ and ¹³C‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymer were performed. The thermal behavior of the copolymer and its complexes were investigated with differential scanning calorimetry (DSC) and thermogravimetry techniques under a nitrogen atmosphere. The copolymer showed high thermal stability and a glass transition in the DSC curves. The separation of various metal ions by the water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) reagent in the aqueous phase with liquid‐phase polymer‐based retention was investigated. The method was based on the retention of inorganic ions by this polymer in a membrane filtration cell and subsequent separation of low‐molar‐mass species from the polymer/metal‐ion complex formed. Poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) could bind metal ions such as Cr(III), Co(II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) in aqueous solutions at pHs 3, 5, and 7. The retention percentage for all the metal ions in the polymer was increased at pH 7, at which the maximum retention capacity could be observed. The interaction of inorganic ions with the hydrophilic polymer was determined as a function of the pH and filtration factor. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 178–185, 2006     

Studies on Electrophilic Interaction of 2,3‐Allenols with Electrophilic Halogen Reagents: Selective Synthesis of 2,5‐Dihydrofurans, 3‐Halo‐3‐alkenals,or 2‐Halo‐2‐alkenyl Ketones

The reaction of primary 2,3‐allenols with iodine (I₂) afforded 2,5‐dihydrofurans while that of readily available 1‐aryl or 1‐methyl substituted 2,3‐allenols with bromine (Br₂), N‐bromosuccinimide (NBS), I₂ or N‐iodosuccinimide (NIS) formed the not easily available but synthetically useful 3‐halo‐3‐alkenals and 2‐halo‐2‐alkenyl ketones with good selectivity and yields via a sequential electrophilic interaction of X⁺ with the allene moiety, 1,2‐aryl or 1,2‐proton shift, and H⁺ elimination process.     

Synthesis,Crystal Structure,and Thermal Behaviors of 3‐Nitro‐1,5‐bis(4,4′‐dimethylazide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP)

The energetic material, 3‐nitro‐1,5‐bis(4,4′‐dimethyl azide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP), was firstly synthesized by means of Click Chemistry using 1,5‐diazido‐3‐nitrazapentane as main material. The structure of NDTAP was confirmed by IR, ¹H NMR, and ¹³C NMR spectroscopy; mass spectrometry, and elemental analysis. The crystal structure of NDTAP was determined by X‐ray diffraction. It belongs to monoclinic system, space group C2/c with crystal parameters a=1.7285(8) nm, b=0.6061(3) nm, c=1.6712(8) nm, β=104.846(8)°, V=1.6924(13) nm³, Z=8, μ=0.109 mm⁻¹, F(000)=752, and D_c=1.422 g cm⁻³. The thermal behavior and non‐isothermal decomposition kinetics of NDTAP were studied with DSC and TG‐DTG methods. The self‐accelerating decomposition temperature and critical temperature of thermal explosion are 195.5 and 208.2 °C, respectively. NDTAP presents good thermal stability and is insensitive.     

Synthesis of poly‐N‐(thiazol‐2‐yl)methacrylamide: Characterization,complexation, and bioactivity

Cu(II) complexes with N‐(thiazol‐2‐yl)methacrylamide (NTM) and its polymer PNTM have been synthesized. The ligands (NTM and PNTM) and their Cu(II) complexes have been characterized by FTIR and ¹H‐NMR. EDX was performed to know the elemental composition and X‐ray powder diffractometry (XRD) analysis was applied to detect the crystallinity of the complexes. The morphology of these complexes was investigated with scanning electron microscopy (SEM) and proves that the monomer complexes have a strongly crystalline structure compared with the polymer complexes, which show that it is only weakly crystalline. These results from SEM are in agreement with results obtained from XRD. Thermal properties of the ligands and their complexes have been studied by thermogravimetric analysis and differential scanning calorimetry. The activity of the ligands and their complexes has been screened against S. aureus, E. coli, Pseudomonas, and Candida albicans. The synthesized compounds have shown good affinity as antibacterial and antifungal agents, which increased on complexation with Cu(II) ion. The results of these studies show the Cu(II) complexes to be more thermal stable as compared with NTM and PNTM. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis,properties and pyrolysis of siloxane‐ and imide‐modified epoxy resin cured with siloxane‐containing dianhydride

Hydrosilylation of nadic anhydride with tetramethyl disiloxane yielded 5,5′‐(1,1,3,3‐tetramethyl disiloxane‐1,3‐diyl)‐bis‐norborane‐2,3‐dicarboxylic anhydride (I), which further reacted with 4‐aminophenol to give N,N′‐bis(4‐hydroxyphenyl)‐5,5′‐bis‐(1,1,3,3‐tetramethyl disiloxane‐1,3‐diyl)‐bis‐norborane‐2,3‐dicarboximide (II). Epoxidation of II with excess epichlorohydrin formed a siloxane‐ and imide‐modified epoxy oligomer (ie diglycidyl ether of N,N′‐bis(4‐hydroxyphenyl)‐5,5′‐bis(1,1,3,3‐tetramethyl disiloxane‐1,3‐diyl)‐bis‐norborane‐2,3‐dicarboximide) (III). Equivalent ratios of III/I of 1/1 and 1/0.8 were prepared and cured to produce crosslinked materials. Thermal mechanical and dynamic mechanical properties were investigated by TMA and DMA, respectively. It was noted that each of these two materials showed a glass transition temperature (T_g) higher than 160 °C with moderate moduli. The thermal degradation kinetics was studied with dynamic thermogravimetric analysis (TGA) and the estimated apparent activation energies were 111.4 kJ mol^?1 (in N₂), 117.1 kJ mol^?1 (in air) for III/I = 1/0.8, and 149.2 kJ mol^?1 (in N₂), 147.6 kJ mol^?1 (in air) for III/I = 1/1. The white flaky residue of the TGA char was confirmed to be silicon dioxide, which formed a barrier at the surface of the polymer matrix and, in part, accounted for the unique heat resistance of this material. Copyright © 2005 Society of Chemical Industry     

Aerobic Oxidation of Benzylic Alcohols in Water by 2,2,6,6‐Tetramethylpiperidine‐1‐oxyl (TEMPO)/Copper(II) 2‐N‐Arylpyrrolecarbaldimino Complexes

Novel copper(II) 2‐N‐arylpyrrolecarbaldimine‐based catalysts for the aerobic oxidation of benzylic alcohols mediated by the 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) radical are reported. The catalytic activity for both synthesized and in situ made complexes in alkaline water solutions was studied revealing high efficiency and selectivity (according to GC selectivity always >99%) for both of these catalytic systems. For example, quantitative conversion of benzyl alcohol to benzaldehyde can be achieved with the in situ prepared bis[2‐N‐(4‐fluorophenyl)‐pyrrolylcarbaldimide]copper(II) catalysts in 2 h with atmospheric pressure of O₂ at 80 °C. Interestingly, these catalysts can utilize dioxygen as well as air or hydrogen peroxide as the end oxidants, producing water as the only by‐product.     

Synthesis and characterization of poly(L‐lactide‐co‐ϵ‐caprolactone)‐b‐poly(L‐lactide) biodegradable diblock copolyesters: Effect of the block lengths on their thermal properties

Poly(L ‐lactide‐co‐ε‐caprolactone)‐b‐poly(L ‐lactide) [P(LL‐co‐CL)‐b‐PLL] diblock copolyesters were synthesized in a two‐step process with 1‐dodecanol (DDC) and stannous octoate as the initiating system. In the first‐step reaction, a 50:50 mol % amorphous poly(L ‐lactide‐co‐ε‐caprolactone) [P(LL‐co‐CL)] copolyester was synthesized via the bulk copolymerization of L ‐lactide and ε‐caprolactone, which was followed by the polymerization of the PLL crystalline block at the end chain in the second‐step reaction. The yielded copolyesters were characterized with dilute‐solution viscometry, gel permeation chromatography, ¹H‐ and ¹³C‐NMR, and differential scanning calorimetry methods. The molecular weights of the P(LL‐co‐CL) copolyesters from the first‐step reaction were controlled by the DDC concentrations, whereas in the second‐step reaction, the molecular weights of the P(LL‐co‐CL)‐b‐PLL diblock copolyesters depended on the starting P(LL‐co‐CL) copolyester molecular weights and L ‐lactide/prepolymer molar ratios. The starting P(LL‐co‐CL) copolyester molecular weights and PLL block lengths seemed to be the main factors affecting specific thermal properties, including the melting temperature (T_m), heat of melting (ΔH_m), crystallizing temperature (T_c), and heat of crystallizing (ΔH_c), of the final P(LL‐co‐CL)‐b‐PLL diblock copolyester products. T_m, ΔH_m, T_c, and ΔH_c increased when the PLL block lengths increased. However, these thermal properties of the diblock copolyesters also decreased when the P(LL‐co‐CL) block lengths increased. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Thermal Behavior and Specific Heat Capacity of 1‐t‐Butyl‐3,3‐dinitroazetidinium Perchlorate

1‐t‐Butyl‐3,3‐dinitroazetidinium perchlorate (TDNAZ ⋅ HClO₄) was synthesized, DSC and TG/DTG methods were used to study the thermal behavior of TDNAZ⋅HClO₄ under a non–isothermal condition. The intense exothermic decomposition process of DSC curves were analyzed to obtain its kinetic parameters. Continuous specific heat capacity (C _p) mode of micro–calorimeter was used to determine its C _p, its specific molar heat capacity (C _{p ,m}) was 365.70 J mol⁻¹ K⁻¹ at 298.15 K. The self‐accelerating decomposition temperature (T _SADT), thermal ignition temperature (T _TIT), and critical temperature of thermal explosion (T _b) were obtained to evaluate its thermal stability and safety. The above results of TDNAZ ⋅ HClO₄ were compared with those of 3,3‐dinitroazetidinium perchlorate (DNAZ ⋅ HClO₄), and the effect of tert‐butyl group on them was discussed.