Untersuchung der CO2‐Absorptionskinetik in wässrigen Lösungen von N,N‐Diethylethanolanmin und N‐Ethylethanolamin

N‐Ethylethanolamine (EEA) and N,N‐diethylethanolamine (DEEA) represent promising alkanolamines for CO₂ removal from gaseous streams, as they can be prepared from renewable resources. In this work, the reaction rate constant for the reaction between CO₂ and EEA and the liquid‐side mass transfer coefficient were determined from the absorption rate measurements in a blend comprising DEEA, EEA and H₂O. A stirred‐cell reactor was applied for the absorption studies, whereas a zwitterion mechanism for EEA and a base‐catalyzed hydration mechanism for DEEA were used to describe the reaction kinetics.     

The development of kinetics model for CO2 absorption into tertiary amines containing carbonic anhydrase

CO₂ absorption into aqueous solutions of two tertiary alkanolamines, namely, MDEA and DMEA with and without carbonic anhydrase (CA) was investigated with the use of the stopped‐flow technique at temperatures in the range of 293–313 K, CA concentration varying from 0 to 100 g/m³ in aqueous MDEA solution with the amine concentration ranging from 0.1 to 0.5 kmol/m³, and CA concentration varying from 0 to 40 g/m³ in aqueous DMEA solution with the amine concentration ranging from 0.05 to 0.25 kmol/m³. The results show that the pseudofirst‐order reaction rate (k_{0, amine}; s^?1) is significantly enhanced in the presence of CA as compared with that without CA. The enhanced values of the kinetic constant in the presence of CA has been calculated and a new kinetics model for reaction of CO₂ absorption into aqueous tertiary alkanolamine solutions catalyzed by CA has been established and used to make comparisons of experimental and calculated pseudo first‐order reaction rate constant (k_{0, with CA}) in CO₂‐MDEA‐H₂O and CO₂‐DMEA‐H₂O solutions. The AADs were 15.21 and 15.17%, respectively. The effect of pKa on the CA activities has also been studied by comparison of CA activities in different tertiary amine solutions, namely, TEA, MDEA, DMEA, and DEEA. The pKa trend for amines were: DEEA > DMEA > MDEA > TEA. In contrast, the catalyst enhancement in amines was in the order: TEA> MDEA> DMEA> DEEA. Therefore, it can be seen that the catalyst enhancement in the amines decreased with their increasing pKa values. © 2017 American Institute of Chemical Engineers AIChE J, 2017     

A comparative kinetics study of CO2 absorption into aqueous DEEA/MEA and DMEA/MEA blended solutions

The kinetics of CO₂ absorption into aqueous solutions of N,N‐diethylethanolamine (DEEA), and N,N‐dimethylethanolamine (DMEA), and their blends with monoethanolamine (MEA) have been studied in a stopped‐flow apparatus. The kinetics experiments were carried out at the concentrations of DEEA and DMEA varying from 0.075 to 0.175 kmol/m³, respectively, and that of MEA ranging between 0.0075 and 0.0175 kmol/m³, over the temperature range of 293–313 K. Two kinetics models are proposed to interpret the reaction in the blended amine systems and the results show that the model which incorporates the base‐catalyzed hydration mechanism and termolecular mechanism resulted in a better prediction. Furthermore, the kinetics behaviors of CO₂ absorption into two blended systems are comprehensively discussed according to their molecular structures. It can be concluded that the interaction between tertiary amines and primary amines as well as the alkyl chain length of tertiary amines have a significant influence on the kinetics. © 2017 American Institute of Chemical Engineers AIChE J, 64: 1350–1358, 2018     

Mass transfer performance and correlations for CO2 absorption into aqueous blended of DEEA/MEA in a random packed column

The mass transfer performance of CO₂ absorption into blended N,N‐diethylethanolamine (DEEA)/ethanolamine (MEA) solutions was investigated using a lab‐scale absorber (H = 1.28 m, D = 28 mm) packed with Dixon ring random packing. The mass transfer coefficient K_Ga_v, the unit volume absorption rate Φ, outlet concentration of CO₂ (y_CO2), and the bottom temperature T_bot of CO₂ in aqueous DEEA/MEA solutions were determined over the feed temperature range of 298.15–323.15 K, lean CO₂ loading of 0.15–0.31 mol/mol, over a wide range of liquid flow rate of 3.90–9.75 m³/m²‐h, by using inert gas flow rate of 26.11–39.17 kmol/m²‐h and 6–18 kPa CO₂ partial pressure. The results show that liquid feed temperature, lean CO₂ loading, liquid flow rate, and CO₂ partial pressure had significant effect on those parameters. However, the inert gas flow rate had little effect. To allow the mass transfer data to be really utilized, K_Ga_v and y_out correlations for the prediction of mass transfer performance were proposed and discussed. © 2017 American Institute of Chemical Engineers AIChE J, 63: 3048–3057, 2017     

Equilibrium solubility of CO<Subscript>2</Subscript> in aqueous binary mixture of 2-(diethylamine)ethanol and 1, 6-hexamethyldiamine

CO₂ solubility data are important for the efficient design and operation of the acid gas CO₂ capture process using aqueous amine mixture. 2-(Diethylamino)ethanol (DEEA) solvent can be manufactured from renewable sources like agricultural products/residue, and 1,6-hexamethyldiamine (HMDA) solvents have higher absorption capacity as well as reaction rate with CO₂ than conventional amine-based solvents. The equilibrium solubility of CO₂ into aqueous binary mixture of DEEA and HMDA was investigated in the temperature range of 303.13-333.13 K and inlet CO₂ partial pressure in the range of 10.133-20.265 kPa. Total concentration of aqueous amine mixtures in the range of 1.0-3.0 kmol/m³ and mole fraction of HMDA in total amine mixture in the range of 0.05-0.20 were taken in this work. CO₂ absorption experiment was performed using semi-batch operated laboratory scale bubble column to measure equilibrium solubility of CO₂ in amine mixture, and CO₂ absorbed amount in saturated carbonated amine mixture was analyzed by precipitation-titration method using BaCl₂. Maximum equilibrium CO₂ solubility in aqueous amine mixture was observed at 0.2 of HMDA mole fraction in total amine mixture with 1.0 kmol/m³ total amine concentration. New solubility data of CO₂ in DEEA+HMDA aqueous mixtures in the current study was compared with solubility data available in previous studies conducted by various researchers. The study shows that the new absorbent as a mixture of DEEA+HMDA is feasible for CO₂ removal from coal-fired power plant stack gas streams.     

Reaction kinetics of 2‐((2‐aminoethyl) amino) ethanol in aqueous and non‐aqueous solutions using the stopped‐flow technique

Observed pseudo‐first‐order rate constants (k_o) for the reaction between CO₂ and 2‐((2‐aminoethyl) amino) ethanol (AEEA) were measured using the stopped‐flow technique in an aqueous system at 298, 303, 308 and 313 K, and in non‐aqueous systems of methanol and ethanol at 293, 298, 303 and 308 K. Alkanolamine concentrations ranged from 9.93 to 80.29 mol m^?3 for the aqueous system, 29.99–88.3 mol m^?3 for methanol and 44.17–99.28 mol m^?3 for ethanol. Experimentally obtained rate constants were correlated with two mechanisms. For both the aqueous‐ and non‐aqueous‐AEEA systems, the zwitterion mechanism with a fast deprotonation step correlated the data well as assessed by the reported statistical analysis. As expected, the reaction rate of CO₂ in the aqueous‐AEEA system was found to be much faster than in methanol or ethanol. Compared to other promising amines and diamines studied using the stopped‐flow apparatus, the pseudo‐first‐order reaction rate constants were found to obey the following order: PZ (cyclic‐diamine) > EDA (diamine) > AEEA (diamine) > 3‐AP (primary amine) > MEA (primary amine) > EEA (primary amine) > MO (cyclic‐amine). The reaction rate constant of CO₂ in aqueous‐AEEA was double that in aqueous‐MEA, and the difference increased with an increase in concentration. All reaction orders were practically unity. With a higher capacity for carbon dioxide and a higher reaction rate, AEEA could have been a good substitute to MEA if not for its high thermal degradation. AEEA kinetic behaviour is still of interest as a degradation product of MEA. © 2012 Canadian Society for Chemical Engineering     

Kinetics of CO2 absorption into a novel 1‐diethylamino‐2‐propanol solvent using stopped‐flow technique

A stopped‐flow apparatus was used to measure the kinetics of carbon dioxide (CO₂) absorption into aqueous solution of 1‐diethylamino‐2‐propanol (1DEA2P) in terms of observed pseudo‐first‐order rate constant (k_o) and second‐order reaction rate constant (k₂), in this work. The experiments were conducted over a 1DEA2P concentration range of 120–751 mol/m³, and a temperature range of 298–313 K. As 1DEA2P is a tertiary amine, the base‐catalyzed hydration mechanism was, then, applied to correlate the experimental CO₂ absorption rate constants obtained from stopped‐flow apparatus. In addition, the pK_a of 1DEA2P was experimentally measured over a temperature range of 278–333 K. The Brønsted relationship between reaction rate constant (obtained from stopped‐flow apparatus) and pK_a was, then, studied. The results showed that the correlation based on the Brønsted relationship performed very well for predicting the absorption rate constant with an absolute average deviation of 5.2%, which is in an acceptable range of less than 10%. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3502–3510, 2014     

Vapour–liquid equilibrium of CO2 in aqueous solutions of N‐methyl‐2‐ethanolamine

The equilibrium solubility of CO₂ into aqueous solution of sterically hindered N‐methyl‐2‐ethanolamine or methyl amino ethanol (MAE) was investigated in the temperature range of 303.1–323.1 K and total CO₂ pressure in the range of 1–350 kPa. The N‐methyl‐2‐ethanolamine aqueous solutions studied were 0.968, 1.574, 2.240 and 3.125 mol kg^?1 of solvent. © 2011 Canadian Society for Chemical Engineering     

Absorption of Carbon Dioxide into Ionic Liquid of 2-Hydroxy Ethylammonium Lactate

Abstract

Absorption of carbon dioxide into organic solvents such as DMA, NMP, DMSO, and DMF with the 2-hydroxy ethylammonium lactate (HEAL) ionic liquid was investigated using a batch stirred tank with a plane of gas-liquid interface in a range of 0–2.0 kmol/m³ of HEAL and 298–318 K at 101.3 kPa. The absorption of CO₂ was analyzed with the film model accompanied by the zwitterion mechanism of CO₂ with HEAL. The proposed model fits the experimental data of the enhancement factor due to the ready, chemical absorption of CO₂ in different solvents, temperatures, and HEAL concentrations. The reaction rate constant of CO₂ with HEAL was correlated linearly with the solubility parameter of the solvent.     

Absorption of Carbon Dioxide into Aqueous Solution of Sodium Glycinate

Abstract

Carbon dioxide was absorbed into aqueous solution of sodium glycinate (SG) at different SG concentrations, CO₂ partial pressures, and temperatures in the range of 0.5–3.0 kmol/m³, 25–101.3 kPa, and 298–318 K, respectively, using a stirred semi-batch vessel with a planar gas-liquid interface. Both the reaction order and rate constant are determined from gas absorption rates under the fast reaction regime. The reaction was found to be first order with respect to both CO₂ and SG. The activation energy for the CO₂-SG reaction has been found to be 59.8 kJ/mol. The second-order reaction rate constants were used to obtain the theoretical values of absorption rate based on the film theory.     

Chemical absorption of carbon dioxide into oxirane solution containing ID-CP-MS41 catalyst

CP-MS41 was synthesized by hydrolysis of tetraorthosilicate, as a silicon source, with 3-chloropropyltriethoxysilane as an organosilane using cetyltrimethylammonium bromide as a template. ID-CP-MS41 was synthesized by immobilization of imidazole on the CP-MS41 and was dispersed in organic liquid as a mesoporous catalyst for the reaction between carbon dioxide and oxirane. Phenyl glycidyl ether and glycidyl methacrylate were used as oxiranes. Carbon dioxide was absorbed into the oxirane solution in a stirred batch tank with a planar gas-liquid interface within a range of 0–2.0 kmol/m³ of oxirane and 333–363 K at 101.3 kPa. The measured values of absorption rate were analyzed to obtain the reaction kinetics using the mass transfer mechanism associated with the chemical reactions based on the film theory. The overall reaction of CO₂ with oxirane, which is assumed to consist of two steps-i) a reversible reaction between oxirane (B) and catalyst of ID-CP-MS41 (QX) to form an intermediate complex (C₁), and ii) irreversible reaction between C₁ and CO₂ to form QX and five-membered cyclic carbonate (C)-was used to obtain the reaction kinetics through the pseudo-first-order reaction model. Polar solvents such as N, N-dimethylacetamide, Nmethyl-2-pyrrolidinone, and dimethyl sulfoxide affected the reaction rate constants.     

Equilibrium and Kinetics of the Extraction of Propionic Acid Using Tri‐n‐Octylphosphineoxide

Organophosphorous compounds have been widely used in inorganic analysis for the extraction and separation of inorganic acids or metal species. Since these compounds can form hydrogen bonds to proton donors, they can also be used for the extraction of acidic organic compounds. Therefore, the reactive extraction of propionic acid using tri‐n‐octylphosphine oxide (TOPO) in hexane was studied. Equilibrium and kinetics experiments were performed. The extraction of propionic acid using n‐heptane, light liquid paraffin, heavy liquid paraffin and hexane was studied and hexane was found to be most suitable diluent. The equilibrium complexation constant for the propionic acid‐TOPO complex was determined to be 0.702 m³/kmol. The extraction was found to be first order in propionic acid and first order in TOPO with the overall rate constant as 46.91 (m³/kmol)²/s.     

Absorption of carbon dioxide in alkanolamines in the presence of fine activated carbon particles

The rates of absorption of CO₂ into water and 0.1 kmol/m³ aqueous solutions of MEA, DEA and AMP were measured in a stirred cell with a flat gas-liquid interface in the presence of fine activated carbon particles. Experiments showed that the rates of absorption increased significantly with increases in the loading of activated carbon up to about 6 kg/m³ and thereafter remained constant.     

Absorption of Carbon Dioxide into Aqueous Xanthan Gum Solution Containing Monoethanolamine

Abstract

Carbon dioxide was absorbed into the aqueous xanthan gum (XG) solution in the range of 0–0.151 wt% containing monoethanolamine (MEA) of 0–2 kmol/m³ in a flat‐stirred vessel with the impeller of 0.05 m and agitation speed of 50 rpm at 25°C and 0.101 MPa to measure the absorption rate of CO₂. The volumetric liquid‐side mass transfer coefficient (k_La_L) of CO₂ decreased with increasing XG concentration, and was correlated with the empirical formula having the rheological behavior of XG solution. The chemical absorption rate of CO₂ was estimated by the film theory using the values of k_La_L and physicochemical properties of CO₂ and MEA. The aqueous XG solutions made the rate of absorption of CO₂ accelerated compared with the Newtonian liquid based on the same viscosity of the solution.     

Numerical investigation on CO2 absorbed in aqueous N‐methyldiethanolamine + piperazine

A multiphase and multicomponent mass transfer model of CO₂ absorbed in aqueous N‐methyldiethanolamine and piperazine (PZ) was built in the study. In the model, a simple method of mass transfer between phases was proposed. Besides, the hydrodynamics, thermodynamics, and complex reversible chemical reaction were considered simultaneously. The model was validated by comparing with the previous experimental data which showed that simulated results can represent the experimental data with reasonable accuracy. Based on the model, the effects of gas velocity, liquid load and CO₂ loading on the absorption rate, and enhancement factor were analyzed. Model results showed that the enhancement factor increased with a rising gas velocity while decreased with a rising liquid load or CO₂ loading. The change of enhancement factor with CO₂ loading was similar to that of equilibrium concentration of PZ which indicated that PZ was significant to the absorption process. Furthermore, the distributions of specie concentrations were discussed in detail. © 2016 American Institute of Chemical Engineers AIChE J, 63: 2386–2393, 2017     

Chemical absorption of carbon dioxide into phenyl glycidyl ether solution containing THA-CP-MS41 catalyst

Carbon dioxide was absorbed into the phenyl glycidyl ether (PGE) solution within a range of 0–2.0 kmol/m³ in a stirred batch tank with a planar gas-liquid interface at 333–363 K and 101.3 kPa. Trihexylamine-immobilized on chloropropyl-functionalized MCM-41 (THA-CP-MS41) was used as a mesoporous catalyst, dispersed in organic liquid for the reaction between carbon dioxide and PGE. The measured absorption rates were analyzed to obtain the reaction kinetics of the consecutive chemical reactions which consisted of two steps using the mass transfer mechanism based on film theory. The overall reaction kinetics, analyzed with the pseudo-first-order reaction constant in the consecutive reaction model, was equivalent to the consecutive reaction kinetics. Effects of polar solvent, such as N, N-dimethylacetamide, N-methyl-2-pyrrolidinone, and dimethyl sulfoxide, on the reaction rate constants were observed using the solubility parameter of the solvent.     

Chemical Absorption of Carbon Dioxide into Aqueous Solution of Potassium Threonate

Carbon dioxide was absorbed into aqueous solution of potassium threonate (PT) at different concentrations of PT and CO₂, and temperatures in the range of 0.1–1.0 kmol/m³, 10.1–101.3 kPa, and 293-313 K, respectively, using a stirred semi-batch vessel with a planar gas-liquid interface. Both the reaction order and rate constant were determined from gas absorption rates under the fast pseudo-first-reaction regime. The reaction was found to be first order with respect to both CO₂ and PT, and its activation energy has been found to be 40.6 kJ/mol. From a comparison of the reaction kinetics by the overall reaction scheme with those by the elementary reaction scheme based on the zwitterions mechanism, the overall reaction between CO₂ and PT has been found to be equivalent to the formation of zwitterions.     

Kinetics of Carbon Dioxide Binding by Promoted Organic Liquids

The reaction kinetics of carbon dioxide and CO₂‐binding organic liquids (CO₂BOLs) promoted by piperazine (PZ) and its derivatives were investigated experimentally by stopped‐flow conductimetry. The study was carried out at 298 K and for a concentration range of 0–0.25 kmol m^?3 of PZ, 1‐(2‐aminoethyl)piperazine (AEPZ) or 1‐(2‐hydroxyethyl)piperazine (NHEPZ) while the superbase (1,1,3,3‐tetramethylguanidine or 1,8‐diazabicyclo[5.4.0]undec‐7‐ene) concentrations were kept constant at 10.0 wt %. Based on pseudo‐first‐order reaction conditions, the intrinsic reaction rate data were analyzed according to a modified termolecular reaction mechanism. The results showed that the rate of reaction between CO₂BOLs and CO₂ could be significantly enhanced by blending with small amounts of PZ, NHEPZ or AEPZ as promoters.     

Gas absorption of carbon dioxide in a hollow fiber contained liquid membrane absorber

Experiments on the absorption of CO₂ into a hollow fiber contained liquid membrane absorber were performed. The feed gas was a mixture of CO₂ and N₂, absorbent liquid was 2-amino-2-methyl-l-propanol and the hollow fiber was a microporous hydrophobic polytetrafluoroethylene membrane. Outlet concentration of CO₂ from the absorber decreased as absorbent concentration increased, gas flow rate increased and were held constant for speed of agitation, but had a maximum value in the range of inlet concentration of CO₂ from 5 to 40 mole%. The reaction rate constant obtained for CO₂-amine system was 231 I/mol · s at 25 °C using a flat stirred vessel, and the membrane-side-mass-transfer coefficient was 1.217 × 10⁻⁵ mol/cm² · s · atm in CO2/N2-amine system. A diffusion model based on mass transfer with fast-reaction was proposed to predict the performance of the absorber.     

Controlled radical alternating copolymerization of N‐phenyl maleimide with ethyl α‐ethylacrylate by reversible addition fragmentation chain‐transfer process

The alternating copolymerization of N‐phenyl maleimide (NPMI) with ethyl α‐ethylacrylate (EEA) by the reversible addition fragmentation chain‐transfer process was investigated. The monomer reactivity ratios were measured and r₁ = 0.19 ± 0.03 for NPMI and r₂ = 0.20 ± 0.04 for EEA. It was found that before about 45% of the comonomer conversion, the molecular weight of the copolymer increased with the conversion, the molecular weight distribution was rather narrow, and the molecular weight of the copolymer approached a constant value, irrespective of the length of the polymerization time. Electronic spin resonance determined that the radical signal disappeared quickly after the conversion of comonomer exceeded 45%, which may be attributed to the coupling termination of the propagating polymer chains with the EEA end with the intermediate radicals when the concentration of comonomers decreased. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2376–2382, 2004