The Effect of Initiators and Reaction Conditions on the Polymer Syntheses by Atom Transfer Radical Polymerization

The controlled/“living” radical polymerization of methyl methacrylate (MMA), 2-hydroxyethyl methacrylate (HEMA), and styrene by atom transfer radical polymerization (ATRP) is reported. The effect of initiators and reaction conditions on the ATRP results was investigated. Controlled polymerizations with predictable molecular weights were performed on MMA at 40^○C and 80^○C using a CuCl/bipyridine (bipy) catalyst system in conjunction with 1-bromoethyl benzene as the initiator. The addition of a polar solvent was necessary to decrease the polymerization rate and afford low polydispersity materials. The ATRP processes followed a first-order kinetics with respect to the monomer concentration. The molecular weights of the resulting polymers were very close to their calculated values and increased with the conversion. The ATRP results of styrene showed a similar trend and revealed that CuBr/bipy or CuBr/PMDETA was a more suitable catalyst system than CuCl/bipy. In addition, it was found that controlled polymerizations could be readily carried out both in a nonpolar solvent or in bulk. Furthermore, by using the bromine-terminated polymer as the macroinitiator, diblock copolymers of PSt-b-PMMA, PSt-b-PHEMA, PMMA-b-PSt, and PMMA-b-PHEMA could be obtained. Thermal analysis and X-ray diffraction studies confirmed the amorphous structures of the resulting polymers.     

Reverse atom transfer radical polymerization of styrene in the presence of tetraethylthiuram disulfide

Reverse atom transfer radical polymerization (ATRP) of styrene initiated with tetraethylthiuram disulfide (TD)/cuprous bromide (CuBr)/2,2′-bipyridine (bpy) has been successfully carried out at 120 °C. The kinetic plot was first order in monomer. The measured number-average molecular weight was in good accordance with the theoretical one. Radical scavenger 1,1-diphenyl-2-picrylhydrazyl (DPPH) immediately terminated the reaction, which supported the radical essence of this polymerization. ¹H NMR and UV spectra analyses revealed α-S₂CNEt₂ and ω-Br end groups on the polystyrene chain. Conventional ATRP of methyl methacrylate could progress with the obtained polymer acting as the macroinitiator and CuBr/bpy or CuCl/bpy as the catalyst.     

Silica-supported quinine-CuBr catalyzed atom transfer radical polymerization of methyl methacrylate

9-Amino epi-quinine was used as a ligand in the atom transfer radical polymerization (ATRP) for the first time, and high monomer conversion as well as small polydispersity could be obtained. The 9-amino epi-quinine-containing organosilane was synthesized and immobilized onto three different silica supports, i.e., fumed SiO₂, SBA-15, and MCM-48, followed by complexing with CuBr. With the MCM-48 supported catalyst, polymerization of methyl methacrylate achieved high monomer conversion, small polydispersity, and low residual copper content in the product. This heterogeneous catalyst could also be recycled effectively.     

Synthesis of well-defined norbornene–lactone-functionalized polymers via ATRP

Well-defined norbornene–lactone-functionalized polymers were synthesized by atom transfer radical polymerization (ATRP) of 5-methacryloxy-6-hydroxynorbornene-2-carboxylic-6-lactone (MNL) and 5-acryloxy-6-hydroxynorbornene-2-carboxylic-6-lactone (ANL) monomers. The ATRP of MNL initiated by ethyl 2-bromopropionate (EBrP), in both N,N-dimethylformamide (DMF) and o-dichlorobenzene (ODCB) solvents was successfully carried out in the presence of CuCl/CuBr and N,N,N′′,N′′,N′′-pentamethyltriethylenetetramine (PMDETA) at 70 °C. The CuCl/ODCB catalyst system gave rise to a lower M _w/M _n (≦1.20) than CuBr/DMF catalyst system. The ATRP of ANL was feasible in the presence of CuBr and PMDETA at 70 °C but showed lower reactivity than MNL. The resulting polymers were characterized by means of gel permeation chromatography (GPC) and ¹H NMR spectroscopy.     

Atom transfer radical polymerization of styrene initiated by 2-(4-chloromethyl-phenyl)-benzoxazole with high activity and fluorescent property

Functionalized polystyrene (PSt) was synthesized utilizing atom transfer radical polymerization (ATRP), which was conducted by using 2-(4-chloromethyl-phenyl)-benzoxazole (CMPB) as initiator, CuCl/PMDETA as catalyst, and cyclohexanone as solvent. The mechanism of ATRP was proved by characterizing the structure of PSt via ¹H NMR and preparing of PSt-b-PMMA block copolymer. The polymerization showed first order with respect to monomer concentration and relatively narrow polydispersity (M_w/M_n range from 1.30 to 1.50). Factors such as different reaction temperatures, mole ratio of monomer to initiator and so on, which can affect the ATRP system, were discussed in the paper. Moreover, CMPB showed high activity and could initiate styrene polymerization even at ambient temperature. The optical property of initiator was well preserved in the obtained PSt, and the end-functionalized PSt exhibited strong fluorescent emission at 351 nm.     

Tripodal “click” ligands for copper‐catalyzed ATRP

A series of tris(R‐methyltriazolylmethyl)amines [R = C₆H₅ ( 1 ), 4‐FC₆H₄ ( 2 ), 4‐MeOC₆H₄ ( 3 ), Fc ( 4 )] were prepared and used as ligands for catalytic ATRP of methyl methacrylate (MMA). Despite a lower activity, the CuBr/ 4 catalyst promoted relatively well controlled polymerization compared to CuBr/ 1 , as evidenced by narrower polydispersity indices. Meanwhile, no polymerization activity was observed with CuBr/ 2 and CuBr/ 3 under the catalytic conditions investigated. The CV measurements of CuBr₂ complexes supported 1 and 4 in DMSO showed E_1/2 values of –0.206 and –0.224 V, respectively, confirming the more electron‐rich nature of CuBr/ 4 . Although both CuBr/ 1 and CuBr/ 4 catalysts were only partially soluble in several organic solvents used, kinetic studies revealed a pseudo first order linear plot of ln[M]₀/[M]_t versus time. Addition of CuBr₂ into the polymerization systems led to a decrease in polymer polydispersities and the observed rate constants (k_obs). © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate) triblock copolymer by atom transfer radical polymerization

The synthesis of triblock copolymer poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate), using atom transfer radical polymerization (ATRP), is reported. The copolymers were prepared in two steps. First, polystyrene was synthesized by ATRP using α,α′‐dichloro‐p‐xylene/CuBr/bpy as the initiating system; Second, polystyrene was further used as macroinitiator for the ATRP of octadecyl acrylate to prepare ABA triblock copolymers in the presence of FeCl₂·4H₂O/PPh₃ in toluene. Polymers with controlled molecular weight (M_n = 17,000–23,400) and low polydispersity index value (1.33–1.44) were obtained. The relationship between molecular weight versus conversion showed a straight line. The effect of reaction temperature on polymerization was also investigated, showing a faster polymerization rate under higher temperature. The copolymers were characterized by FTIR, ¹H‐NMR, DSC, and GPC and the crystallization behavior of the copolymers was also studied. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1539–1545, 2004     

Synthesis and characterization of PBMA‐b‐PDMS‐b‐PBMA copolymers by atom transfer radical polymerization

Poly(butyl methylacrylate)–b–poly(dimethylsiloxane)–b–poly(butyl methylacrylate) (PBMA–b–PDMS–b–PBMA) triblock copolymers were synthesized by atom transfer radical polymerization (ATRP). The reaction of α,ω‐dichloride PDMS with 2′‐hydroxyethyl‐2‐bromo‐2‐methylpropanoate gave suitable macroinitiators for the ATRP of BMA. The latter procedure was carried out at 110°C in a phenyl ether solution with CuCl and 4,4′‐di (5‐nonyl)‐2,2′‐bipyridine (dNbpy) as the catalyzing system. The polymerization was controllable, with the increase of the monomer conversion, there was a nearly linear increase of molecular weight and a decrease of polydispersity in the process of the polymerization, and the rate of the polymerization was first‐order with respect to monomer conversion. The block copolymers were characterized with IR and ¹H‐NMR and differential scanning calorimetry. The effects of macroinitiator concentration, catalyst concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP were reported. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 532–538, 2004     

Atom transfer radical polymerization of monomers containing amide and ester moieties monitored by dilatometric method

The kinetics of atom transfer radical polymerization of N-(S)-α-methylbenzylmethacryloylamine (S-(-)-α-MBMA) and α-methylbenzylmethacrylate (α-MBM) monomers, as assessed by % conversion, were determined at 48 °C in a toluene/ethanol mixture (60:40) by a dilatometry method. The effect of the presence of — CONH- or — COOR- moieties on the ATRP polymerization of such monomers was investigated. Controlled polymerizations were performed with the catalyst system [ M ]/[ R - X ]/[ Mtⁿ - Y ]/[ L ] \left[ {\hbox{M}} \right]/\left[ {{\hbox{R}} - {\hbox{X}}} \right]/\left[ {{\hbox{M}}{{\hbox{t}}^{\rm{n}}} - {\hbox{Y}}} \right]/\left[ {\hbox{L}} \right] at molar ratios of 100:15:15:15; 200:15:15:15; 300:15:15:15; and 400:15:15:15, where R-X was EBIB or MCP, M_tⁿ-Y(CuBr or CuCl) and L (Me₆TREN). Also with N-S-(-)-α-MBMA, some studies used ATCA and ABPA as R-X. Plots of the ln[M]₀/[M] vs t as well as from the log Rp vs log [M] showed that the ATRP processes followed a pseudo first-order kinetics with respect to the monomer concentration and that the molecular weight of the resulting polymers increased with the conversion. The ATRP results for both monomers showed a similar trend and revealed that the presence of N-S-(-)-α-MBMA (amide group) affects the polymerization, i.e. it did not react when the EBIB/CuBr/Me₆TREN catalyst system was used. The M_n and M_w were determined by ¹H-NMR and GPC. PDI values fell between 1.19 and 1.5, and indicated that the majority of the systems showed good control of polymerization.     

Controlled polymerization of methylmethacrylate from fumed SiO2 nanoparticles through atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) is a promising method to synthesize well‐defined polymer/inorganic nanoparticles. However, the surface‐initiated ATRP from commercially mass produced inorganic nanoparticles has seldom been studied. In this study, the surface‐initiated ATRP of methylmethacrylate (MMA) from commercially mass produced fumed silica (SiO₂) nanoparticles was investigated. Unlike the ATRP of MMA initiated from a free initiator, the controllability of ATRP of MMA from the surface of fumed silica nanoparticles was much better using ligand 2,2'‐bipyridine (bpy) than N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine (PMDETA) as the initiator was immobilized on the surface of the SiO₂ nanoparticles and the presence of the SiO₂ nanoparticles made the CuCl/bpy catalyst system a homogeneous catalyst system and CuCl/PMDETA a heterogeneous one. The appropriate molar ratio of monomer and initiator was essential for preparing controlled PMMA/SiO₂ nanoparticles. The entire process of ATRP of MMA from the surface of SiO₂ nanoparticles was controllable when using bpy as ligand, xylene as solvent and with a monomer to initiator ratio of 300:1. The ¹H NMR results indicated that the PMMA on the surface of the SiO₂ was prepared via ATRP initiated from 4‐(chloromethyl)phenyltrimethoxysilane. The well‐defined PMMA/SiO₂ nanoparticles obtained have good thermal stability and are well dispersed in organic media as proved by TGA, dynamic light scattering and transmission electron microscopy. © 2013 Society of Chemical Industry     

Photodimers of 9-Haloanthracenes as Initiators in Atom Transfer Radical Polymerization: Effect of the Bridgehead Halogen

Summary Photodimers of 9-chloroanthracene, formed by a [4+4] cycloaddition reaction of 9-chloroanthracene, were used as initiators in the atom transfer radical polymerization of styrene and compared to results previously obtained using photodimers of 9-bromoanthracene as the initiator. Heat-induced cleavage of the photodimer coupled with slow initiation from the bridgehead radical have been used to account for the lack of control in the systems, and thus changing the halogen on the initiating photodimer could support or refute this model. Reactions performed using analogous procedures produced polymers with number average molecular weight (M_n) values significantly higher in the case of 9-chloroanthracene photodimer-initiated systems, with similar polydispersity index (PDI) values observed in trials catalyzed with CuCl or CuBr. Polymer products showed absorbance bands indicative of regenerated anthracene in all cases, consistent with heat-induced cleavage of the photodimer during the course of the polymerization. Kinetic plots demonstrated that the polymerizations initiated with photodimers of 9-chloroanthracene showed maximum M_n values were obtained after approximately 10% monomer conversion, with a decline in M_n as a function of monomer conversion after this point. The data support slower initiation in the case of 9-chloroanthracene photodimers, followed by heat-induced cleavage throughout the polymerization system.     

Atom transfer radical polymerization of lauryl methacrylate

The atom transfer radical polymerization (ATRP) of lauryl methacrylate (LMA) with an ethyl 2‐bromobutyrate/CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine initiation system was successfully carried out in toluene, and poly(lauryl methacrylate) with a low polydispersity (1.2 < weight‐average molecular weight/number‐average molecular weight < 1.5) was obtained. Plots of ln ([M])₀/([M]) versus time and plots of the molecular weight versus conversion showed a linear dependence, indicating a constant number of propagating species throughout the polymerization. The rate of polymerization was 0.56‐order with respect to the concentration of the initiator and 1.30‐order with respect to the concentration of the Cu(I) catalyst. In addition, the effect of the solvent on the polymerization was investigated, and the thermodynamic data and activation parameters for the solution ATRP of LMA were reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1117–1125, 2003     

Synthesis of methyl methacrylate and N‐aryl itaconimide block copolymers via atom‐transfer radical polymerization

The paper describes the synthesis of block copolymers of methyl methacrylate (MMA) and N‐aryl itaconimides using atom‐transfer radical polymerization (ATRP) via a poly(methyl methacrylate)–Cl/CuBr/bipyridine initiating system or a reverse ATRP AIBN/FeCl₃·6H₂O/PPh₃ initiating system. Poly(methyl methacrylate) (PMMA) macroinitiator, ie with a chlorine chain‐end (PMMA‐Cl), having a predetermined molecular weight (M_n = 1.27 × 10⁴ g mol^?1) and narrow polydispersity index (PDI = 1.29) was prepared using AIBN/FeCl₃·6H₂O/PPh₃, which was then used to polymerize N‐aryl itaconimides. Increase in molecular weight with little effect on polydispersity was observed on polymerization of N‐aryl itaconimides using the PMMA‐Cl/CuBr/Bpy initiating system. Only oligomeric blocks of N‐aryl itaconimides could be incorporated in the PMMA backbone. High molecular weight copolymer with a narrow PDI (1.43) could be prepared using tosyl chloride (TsCl) as an initiator and CuBr/bipyridine as catalyst when a mixture of MMA and N‐(p‐chlorophenyl) itaconimide in the molar ratio of 0.83:0.17 was used. Thermal characterization was performed using differential scanning calorimetry (DSC) and dynamic thermogravimetry. DSC traces of the block copolymers showed two shifts in base‐line in some of the block copolymers; the first transition corresponds to the glass transition temperature of PMMA and second transition corresponds to the glass transition temperature of poly(N‐aryl itaconimides). A copolymer obtained by taking a mixture of monomers ie MMA:N‐(p‐chlorophenyl) itaconimide in the molar ratio of 0.83:0.17 showed a single glass transition temperature. Copyright © 2005 Society of Chemical Industry     

Kinetic study of the atom transfer radical polymerization of n‐docosyl acrylate

The atom transfer radical polymerization (ATRP) of n‐docosyl acrylate (DA) was studied at 80°C in N,N‐dimethylformamide using the carbon tetrabromide/FeCl₃/2,2′‐bipyridine (bpy) initiator system in the presence of 2,2′‐azobisisobutyronitrile (AIBN) as the source of reducing agent. The rate of polymerization exhibits first‐order kinetics with respect to the monomer. The linear relationship between the molecular weight of the resulting poly(n‐docosyl acrylate) with conversion and the narrow polydispersity of the polymers indicates the living characteristics of the polymerization reaction. The significant effect of AIBN on the ATRP of DA was studied keeping [FeCl₃]/[bpy] constant. A probable reaction mechanism for the polymerization system is postulated to explain the observed results. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2147–2154, 2005     

Unusual rate enhancement in the thymine assisted ATRP process of adenine monomers

Thymine and adenine monomers were synthesized and polymerized using ATRP in a controlled fashion. In addition a thymine functionalized block copolymer was prepared using ATRP, starting from a poly(ethylene glycol) macro initiator. Polymerization of adenine monomer in DMSO-d₆ showed a significant increase in polymerization rate when polymeric thymine template was present, while thymine monomer did not show a polymerization rate enhancement. Varying the template to monomer ratio demonstrated that the polymerization rate increased even further if an excess of template was applied. Surprisingly, the addition of monomeric complementary moieties resulted in an even greater rate enhancement. These findings led to our conclusion that non-covalent interaction between adenine and thymine in DMSO-d₆ protects the adenine monomer from interaction with the copper catalyst, thus resulting in a faster polymerization.     

A novel ligand for atom transfer radical polymerization

A ligand is a crucial element for atom transfer radical polymerization (ATRP). A new nitrogen-containing compound, 1,1’-(2,2’-(ethane-1,2-diylbis(butyl azanediyl)) -bis(ethane-2,1-diyl)) dipyrrolidin-2-one (DBBD), was synthesized and utilized as the ligand of copper halide for ATRP of methyl methacrylate (MMA) and methyl acrylate (MA). It was found that the CuBr/DBBD and Ethyl 2-bromoisobutyrate (EBIB) system could mediate the polymerization of MMA and the reaction was first-order kinetics, although the control of molecular weights was not perfect. When CuCl was used to replace CuBr, the molecular weights of obtained polymers were well controlled, which indicated the halide exchange could improve the controllability. In the polymerization of MA using Methyl 2-bromopropronate (MBP) or EBIB as initiator and CuCl/DBBD as catalyst, good control of the polymerization could be achieved and the molecular weights were very close to the predicted value.     

Atom transfer radical suspension polymerization of methyl methacrylate catalyzed by CuCl/bpy

Atom transfer radical suspension polymerization (suspension ATRP) of methyl methacrylate (MMA) was carried out using 1-chloro-1-phenylethane (1-PECl) as initiator, copper chloride/bipyridine (CuCl/bpy) as catalyst. The polymerization was accomplished with a mechanical agitator under the protection of nitrogen atmosphere. Apart from the dispersing agent (1% PVA), NaCl was also used in the water phase to decrease the diffusion of CuCl/bpy to water and the influence of the concentration of NaCl was investigated. Subsequently, the kinetic behavior of the suspension ATRP of MMA at different temperatures was studied. At 90 and 95 °C, the polymerization showed first order with respect to monomer concentration until high conversion. The molecular weight (M_n) of the polymer increased with monomer conversion. However, at lower temperatures, different levels of autoacceleration was observed. The polymerization deviated from first order with respect to monomer concentration when the conversion was up to some degree. The lower the temperature was, the more the deviation displayed. On comparison with bulk ATRP of MMA, the rate of suspension ATRP was much faster.     

Urotropine as a highly effective and versatile promoter for atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) is a transition metal complex‐catalyzed controlled/‘living’ radical process. Recently, there has been a lot of interest focused on decreasing the catalyst loading and reducing the cost of post‐polymerization purification for ATRP. In this work, urotropine was found to significantly enhance the ATRP of methyl acrylate (MA), methyl methacrylate (MMA) and styrene (St) catalyzed by CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine (PMDETA) and CuBr/tris(2‐(dimethylamino)ethylamine) (Me₆TREN). With the addition of 25 times the amount of urotropine relative to CuBr, well‐controlled polymerizations of MA, MMA and St were obtained at catalyst‐to‐initiator ratios of 0.01, 0.05 and 0.05, respectively, producing the corresponding polymers with molecular weights close to theoretical values and low polydispersities. The catalyst concentration could even be reduced to ppm level at a catalyst‐to‐initiator ratio as low as 0.001 in the polymerization of MA. These results indicate that urotropine is a very effective and versatile promoter for both CuBr/PMDETA and CuBr/Me₆TREN. In the presence of urotropine, the catalyst loading could be reduced by as much as 1000 times. As PMDETA is one of the cheapest ATRP ligands, the combination of urotropine with CuBr/PMDETA could substantially reduce the catalyst loading and the cost of post‐polymerization purification at the industrial scale and thus is promising for potential industrial applications. © 2014 Society of Chemical Industry     

New fluorous bipyridine ligands for copper‐catalyzed atom transfer radical polymerization of methyl methacrylate in the thermomorphic mode

The atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) is often carried out under homogeneous conditions, so the residual metal catalyst in the polymer often influences the quality of the polymer and causes environmental pollution in the long run. Novel CuBr/4,4′‐bis(R_fCH₂OCH₂)‐2,2′‐bpy complexes (R_f = n‐C₉F₁₉, n‐C₁₀F₂₁, or n‐C₁₁F₂₃; 2,2′‐bpy = 2,2′‐bipyridine) are insoluble in toluene at room temperature yet readily dissolve in toluene at elevated temperatures to form homogeneous phases for use as catalysts in the ATRP reaction, and the Cu complexes precipitate again upon cooling. The CuBr/4,4′‐bis(n‐C₉F₁₉CH₂OCH₂)‐2,2′‐bpy system produced the best results (e.g., polydispersity index by gel permeation chromatography = 1.26–1.41), in that the residual Cu content in the polymer was as low as 19.3 ppm when the ATRP of MMA was carried out in the thermomorphic mode. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

ARGET-ATRP合成双亲性嵌段共聚物及对二氧化钛分散效率的影响

以CuBr2（相对于单体物质的量的0.02%或0.01%）和还原剂、配体混合物为催化体系进行甲基丙烯酸 2(N,N-二甲氨基)乙酯（DMAEMA）的电子转移再生催化剂原子转移自由基聚合（ARGET-ATRP）,研究了溶剂、配体和还原剂种类对聚合的影响,得到分子量分布较窄的（PDI=1.56）聚甲基丙烯酸 2(N,N-二甲氨基)乙酯（PDMAEMA-Br）。以PDMAEMA-Br为引发剂引发丙烯酸丁酯进行“一步法”ARGET-ATRP聚合,得到分子量分布很窄的（PDI=1.4）双亲性嵌段共聚物（PDMAEMA-bPBA)。核磁共振氢谱（1H NMR）测得共聚物组成与GPC测试结果相近。差示扫描量热分析（DSC）测试表明嵌段共聚物在-40.1℃和123.5℃处有两个玻璃化转变温度。该方法大大降低了铜盐催化剂的用量,降低了制备成本,使聚合产物的后处理更容易进行。所得双亲性嵌段共聚物可以作为分散剂,明显提高了二氧化钛在环氧树脂中的分散效率。