Tetrahydrosalen‐stabilized,chloride‐containing rare‐earth complexes: Facile initiator precursors for the preparation of hydroxytelechelic poly(ε‐caprolactone)s

End‐capped poly(ε‐caprolactone)s (PCLs) have been prepared elsewhere by various initiators. However, hydroxytelechelic PCLs have been reported less frequently, although there are two hydroxyl end groups in one polymer chain, which allows diversified functionalization. Two tetrahydrosalen‐backboned chlorides containing rare‐earth complexes, YbLCl(DME)₂ and ErLCl(DME) {where L is 6,6′‐[ethane‐1,2‐diylbis(methylazanediyl)]bis (methylene)bis(2,4‐di‐tert‐butylphenol) and DME is dimethoxyethane}, were first synthesized in this study, and they were used as initiator precursors for a ring‐opening polymerization in the presence of NaBH₄ to afford hydroxytelechelic PCLs. The polymerization under different conditions was investigated, and a possible mechanism is proposed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Ring opening polymerization of ε‐caprolactone initiated by decamolybdate anion: Determination of kinetic and thermodynamic parameters by DSC and 1H‐NMR

The aim of this work is the kinetic and thermodynamic study (by differential scanning calorimetry (DSC) and proton nuclear magnetic resonance (¹H‐NMR)) of the polymerization of ε‐caprolactone initiated by ammonium decamolybdate. By means of isothermal kinetics, enthalpies of reaction in the range 150–160°C, as well as constant rates of polymerization (using an nth‐order kinetics function model), were determined. From an Arrhenius plot, activation energy (E_a = 85.3 kJ/mol) and preexponential factor (A = 1.78 × 10⁸ min^?1) were estimated. Using dynamic methods, crystallization and melting temperatures for the polymer obtained in situ were derived. Kinetic data for polymerization (obtained by ¹H‐NMR) were fitted to 13 different model reaction functions. It was found that power law equations represent better the conversion versus time plots for this system. On the basis of experimental facts, a coordination‐insertion mechanism involving molybdenum(V) species is proposed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Polymerization of acrylonitrile catalyzed by single yttrium tris(2,6‐di‐tert‐butyl‐4‐methyl phenolate)

Polymerization of acrylonitrile was carried out using yttrium tris(2,6‐di‐tert‐butyl 4‐methyl‐phenolate) (Y(OAr)₃) as single component catalyst for the first time. The effects of concentrations of the monomer and catalyst, kinds of rare earth element and solvent, as well as temperature and polymerization time were investigated. The overall activation energy of polymerization in n‐hexane and THF mixture is 18.3 kJ mol^?1. Polyacrylonitriles (PANs) obtained by using Y(OAr)₃ in n‐hexane and THF mixture at 50 °C are predominantly atactic, while yellow PANs obtained in DMF under the same conditions have a syndiotactic‐rich configuration (>50%), and their highly branched and/or cyclized structures have also been found. © 2002 Society of Chemical Industry     

Ethylene polymerization with hybrid nickel diimine/Cp2TiCl2 catalyst: a new method to prepare blends of linear and branched polyethylene

Blends of linear polyethylene (LPE) and branched polyethylene (BPE) display very good mechanic properties that can be beneficial for various applications such as shear thinning and melt elasticity. LPE, BPE and amorphous polyethylene can be produced using nickel diimine (DMN) catalyst under various polymerization conditions, while LPE can be obtained using metallocene catalyst. Thus, LPE/BPE blends can be achieved by in situ polymerization using a hybrid DMN/metallocene catalyst. A novel hybrid catalyst made of DMN and Cp₂TiCl₂ was designed and used for ethylene polymerization. A synergistic effect of the two active sites in the hybrid DMN/metallocene catalyst was observed. Blends of linear and low branched polyethylene were synthesized when polymerization was conducted at low temperature (0 °C), while blends of linear and highly branched polyethylene were obtained at high temperature (50 °C). However, the miscibility of the polymers obtained at 50 °C was dramatically reduced as compared to those obtained at 0 °C. Mesoporous particles (MCM‐41) consisting of aluminosilicate with cylindrical pores were used to support the hybrid catalyst, in which MCM‐41 provides sufficient nanoscale pores to facilitate the polymerization in well‐controlled confined spaces. Blends of LPE and BPE were synthesized by in situ polymerization without adding comonomer and characterized. The miscibility of the polymer blends can be improved by supporting the hybrid catalyst on MCM‐41. Copyright © 2009 Society of Chemical Industry     

(η6‐N‐alkylcarbazole) (η5‐cyclopentadienyl) iron hexafluorophosphate salts in photoinitiated and thermal epoxy polymerization

(η6‐Carbazole)(η5‐cyclopentadienyl) iron hexafluorophosphate salts (CFS PF₆) are capable of photoinitiating cationic polymerization of epoxy monomers directly upon irradiation with long‐wavelength UV light. To improve the solubility of CFS ferrocenium salts in epoxides, two CFS photoinitiators have been prepared: [cyclopentadiene‐Fe‐N‐buylcarbazole] hexafluorophosphate (C4‐CFS PF₆) and [cyclopentadiene‐Fe‐N‐octylcarbazole] hexafluorophosphate (C8‐CFS PF₆), bearing C4 and C8 alkyl chains, respectively, on the nitrogen atom. Studies with real‐time infrared spectroscopy have shown that C4‐CFS and C8‐CFS photoinitiators exhibit high efficiency in polymerization of 3,4‐epoxycyclohexylmethyl‐3,4‐epoxycyclohexane carboxylate (ERL‐4221) epoxy monomer, but lower efficiency in polymerization of di(2,3‐epoxypropyl)‐3,4‐epoxy‐1,2‐cyclohexanedioate (TDE‐85) epoxy monomer. Benzoyl peroxide (BPO) sensitizer was very effective in improving the photoinitiating activities of CFS in polymerization of both ERL‐4221 and TDE‐85. DSC studies have shown that C4‐CFS and C8‐CFS photoinitiators can also be employed as thermal initiators for the cationic ring‐opening polymerization of epoxides at moderate temperatures. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers     

Preparation and kinetic analysis of PS‐b‐PBA block copolymer by 4‐oxo‐TEMPO capped polystyrene macroinitiators

Polystyrene‐block‐poly(n‐butyl acrylate) block copolymers were prepared from 4‐oxo‐2,2,6,6‐tetramethylpiperidinooxy (4‐oxo‐TEMPO) capped polystyrene macroinitiators at a high temperature, 165°C. It was found that the number‐average molecular weight of PBA chains in block copolymers could reach above 10,000 rapidly at early stage of polymerization with a narrow polydispersity index of 1.2–1.4, but after that, the polymerization seemed to be retarded. Furthermore, according to the kinetic analysis, the concentration of 4‐oxo‐TEMPO was increased mainly by the hydrogen transfer reaction of hydroxylamine (4‐oxo‐TEMPOH) to growing radicals during polymerization. This increase in 4‐oxo‐TEMPO concentration could retard the growth of polymer chains. The rate constant of the hydrogen transfer reaction of 4‐oxo‐TEMPOH to growing radicals, k_H, estimated by the kinetic model is about 9.33 × 10⁴M^‐1s^?1 at 165°C. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of well‐defined polystyrene by radical polymerization using 1,1,2,2‐tetraphenyl‐1,2‐ethanediol/feCl3/PPh3 initiation system

Well‐defined polystyrenes with an α‐hydrogen atom and an ω‐chlorine atom end groups and narrow polydispersity (M_n = 2500–4200, M_w/M_n = 1.29–1.48) have been synthesized by a free radical polymerization process using a 1,1,2,2‐tetraphenyl‐1,2‐ethanediol (TPED)/FeCl₃/PPh₃ initiation system. The end groups were monitored by ¹H nuclear magnetic resonance spectroscopy. When the polymerization of styrenes in bulk carried out at 120°C and the ratio of [St]₀ : [TPED]₀ : [FeCl₃]₀ : [PPh₃]₀ was 200 : 1 : 4 : 12, the polymerization exhibited some living/controlled radical polymerization characteristics. The polymerization mechanism was proposed proceeding via a reverse atom transfer radical polymerization (ATRP). Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed chain extension polymerization in the presence of CuCl/2,2′‐bipyridine catalyst system via a conventional ATRP process. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1607–1613, 2000     

Electropolymerization of o‐phenylenediamine on Pt‐electrode from aqueous acidic solution: Kinetic,mechanism, electrochemical studies and characterization of the polymer obtained

Electropolymerization of O‐phenylenediamine (o‐PD) on Pt‐electrode from a deoxygenated aqueous acid medium was carried out using cyclic voltammetry technique. The kinetic parameters were calculated by means of electrochemical data. The experimentally obtained kinetic equation was R_P,_E = k_E [monomer]^1.19 [acid]^1.23 [electrolyte]^0.87 from the value of the anodic current density using cyclic voltammetry technique. The apparent activation energy (E_a) is found to be 28.34 kJ mol^?1. The polymer films obtained have been characterized by X‐ray diffraction, elemental analysis, scanning electron microscopy, ¹H‐NMR, ¹³C‐NMR, UV‐visible, and IR spectroscopy. The mechanism of the electrochemical polymerization reaction has been discussed. TGA is used to confirm the proposed structure and determination of the number of water molecules in the polymeric chain unit. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of poly(methyl methacrylate‐g‐glycidyl azide) graft copolymers using N,N‐dithiocarbamate‐mediated iniferters

A glycidyl azide polymer with pendent N, N‐diethyl dithiocarbamate groups (GAP‐DDC) was prepared by the reaction of poly(epichlorohydrin) (PECH) with pendent N, N‐diethyl dithiocarbamate groups (PECH‐DDC) and sodium azide (NaN₃) in dimethylformamide (DMF). It was then used as a macro‐photoinitiator for the graft polymerization of methyl methacrylate (MMA). Photopolymerization was carried out in a photochemical reactor at a wavelength greater than 300 nm. Conversion was determined gravimetrically and first‐order time conversion plot for the polymerization system showed linear increase with the polymerization time indicating that polymerization proceed in controlled fashion. The molecular weight distribution (M_w/M_n) was in the range of 1.4–1.6 during polymerization. The formation of poly(methyl methacrylate‐g‐glycidyl azide) (PMMA‐g‐GAP) graft copolymer was characterized by gel permeation chromatography, FT‐IR spectroscopy, Thermogravimetric analysis, and differential scanning calorimetry. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

A new method to determine monomer concentration in the polymer particles of emulsion polymerization systems by dynamic light scattering

Emulsifier‐free emulsion polymerization of styrene was performed in the presence of small amount of methacrylic and itaconic acids as carboxylic acid monomers and potassium persulfate as an initiator at 70°C to prepare monodisperse polymer particles. Diameter of monomer swollen polymer particles (d_pswol) was measured by dynamic light scattering for samples taken from the reaction mixture during the Intervals II and III of the emulsion polymerization. Graphically treatment of d_pswol versus conversion data allowed us for the first time to directly determine the critical monomer conversion (x_c), from which constant monomer concentration in the polymer particles (C_MP) during the Interval II was then calculated. x_c and C_MP were obtained to be 0.379 and 5.68, respectively. C_MP value is in good agreement with that obtained by centrifugation method and those reported in the literature for the similar system. Attempts were also made to evaluate the average number of growing chain per particle ( ) during the Interval II of emulsion polymerization of styrene. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Lanthanide(II) amide complexes: Efficient initiators for the living polymerization of methyl methacrylate

Lanthanide(II) complexes supported by amido ligands, [(C₆H₅)(Me₃Si)N]₂Ln(DME)₂ [Ln = Sm ( 1 ) or Yb ( 2 ); DME = 1,2‐dimethoxyethane] and [(C₆H₃? ⁱPr₂‐2,6)(Me₃Si)N]₂Ln(THF)₂ [Ln = Sm ( 3 ) or Yb ( 4 ); THF = tetrahydrofuran], were found to initiate the polymerization of methyl methacrylate (MMA) as efficient single‐component initiators (in toluene for 3 and 4 and in toluene with a small amount of THF for 1 and 2 ) to produce syndiotactic polymers. The catalytic behavior was highly dependent on both the amido ligand and the polymerization temperature. Initiators 3 and 4 initiated MMA polymerization over a wide range of temperatures (20°C to ?40°C), whereas the polymerization with 1 and 2 proceeded smoothly only at low temperatures (≤0°C). The kinetic behavior and some features of the polymerizations of MMA initiated by 3 and 4 were studied at ?40°C. The polymerization rate was first‐order with the monomer concentration. The molar masses of the polymers increased linearly with the increase in the polymer yields, whereas the molar mass distributions remained narrow and unchanged throughout the polymerization; this indicated that these systems had living character. A polymerization mechanism initiated by bimetallic bisenolate formed in situ was proposed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effect of temperature,solvent, Lewis acid and additives on the polymerization of tert‐butyl vinyl ether using Lewis acid‐induced N‐methyleneamines as cationic initiators

N‐Methyleneamines, formed by treating 1,3,5‐trimethylhexahydro‐1,3,5‐triazines with Lewis acids, have been shown to be capable initiators in the cationic polymerization of tert‐butyl vinyl ether, yielding polymers with amine functionality at the chain ends. Previous work was limited to titanium(IV) chloride (TiCl₄) as the Lewis acid in dichloromethane solvent at 0 °C (with resulting polymers possessing relatively broad polydispersity index (PDI) values near 2), while this contribution details the effect of reaction parameters on the polymeric products; specifically, the role of temperature, solvent, Lewis acid and additives. Ultimately, performing the polymerization at ?78 °C in dichloromethane with TiCl₄ as the Lewis acid and tetra‐n‐butylammonium chloride (nBu₄NCl) as the additive afforded the best control over the system, with polymers formed possessing low PDI values (<1.2). Dramatic changes in number‐average molecular weight and PDI were observed in polymers formed by initiating systems of Lewis acid‐induced N‐methyleneamines, with temperature, solvent, Lewis acid and additives all playing a role. By varying single parameters, optimization of the system was achieved. Copyright © 2009 Society of Chemical Industry     

Electrochemical measurements for studying the polymerization process and critical point behaviors of hydrogels

We propose a new technique based on electrochemical measurements for studying the critical point behaviors of the sol–gel transition of acrylamide–N,N′‐methylene bisacrylamide hydrogels. In this technique, no chemical activator is used for accelerating the polymerization reaction. However, a potential difference is applied by means of silver and calomel electrodes placed in the reaction mixture. The silver electrode begins to be ionized and loses its electrons. The free radicals, ^?O₃S? O^?, H^?, and ^?OH, form on the silver electrode via persulfate dissociation. The polymerization is initiated by means of these free radicals. The current measured during the gelation processes passes through a maximum (a Gaussian‐like behavior) and varies linearly with the reaction time during linear polymerization. All the parameters (the monomer, initiator, and crosslinker concentrations, the applied voltage, and the stirring rate of the reacting mixture) affecting the current have been studied in detail. We show that the maxima appearing in the current–time plots correspond to the gelation thresholds, the so‐called sol–gel transition points. We also analytically prove that the current monitors the weight‐average degree of polymerization (DP_w) and the gel fraction (G) below and above the threshold, respectively. The scaling behaviors of DP_w and G have been tested near the gelation thresholds, and we have observed that the critical exponents γ and β, defined for DP_w and G, agree with the predictions by mean‐field theory. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Polymerization of methyl methacrylate with Nickel(II)α‐benzoinoxime complex

Polymerizations of methyl methacrylate (MMA) monomer initiated by a novel Ni(II)α‐benzoinoxime complex have been achieved under homogeneous conditions in the 25–60°C temperature range. The activity for polymerization increases with reaction temperature and by carrying out the polymerization in solution of low‐polarity solvents without any induction time. The obtained polymers have weight‐average molecular weights about 10⁵ and slight broad polydispersity indexes (2.2 ≤ M_w/M_n ≤ 3.3). Dependence of rate constants polymerization and decomposition of initiator (k_app and k_d, respectively) on temperature was investigated and activation parameters were computed from Arrhenius plot. ¹H‐NMR analysis of PMMA revealed a syndio‐rich atactic microstructure in agreement with conventional radical process. Radical scavenger TEMPO effect together with microstructure and molecular weight distributions data supported that the polymerization proceed via free radical mechanism. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

The synthesis of PHA‐g‐(PTHF‐b‐PMMA) multiblock/graft copolymers by combination of cationic and radical polymerization

A new and promising method for the diversification of microbial polyesters based on chemical modifications is introduced. Poly(3‐hydroxy alkanoate)‐g‐(poly(tetrahydrofuran)‐b‐poly(methyl methacrylate)) (PHA‐g‐(PTHF‐b‐PMMA)) multigraft copolymers were synthesized by the combination of cationic and free radical polymerization. PHA‐g‐PTHF graft copolymer was obtained by the cationic polymerization of THF initiated by the carbonium cations generated from the chlorinated PHAs, poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), and poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) (PHBHx) in the presence of AgSbF₆. Therefore, PHA‐g‐PTHF graft copolymers with hydroxyl ends were produced. In the presence of Ce⁺⁴ salt, these hydroxyl ends of the graft copolymer can initiate the redox polymerization of MMA to obtain PHA‐g‐(PTHF‐b‐PMMA) multigraft copolymer. Polymers obtained were purified by fractional precipitation. In this manner, their γ‐values (volume ratio of nonsolvent to the solvent) were also determined. Their molecular weights were determined by GPC technique. The structures were elucidated using ¹H‐NMR and FTIR spectroscopy. Thermal analyses of the products were carried out using differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

A new polymerization method and kinetics for acrylamide: Aqueous two‐phase polymerization

The concept of aqueous two‐phase polymerization and a new polymerization method for the preparation of water‐soluble polymers are presented. The phase diagram of poly(acrylamide) (PAAm)‐poly (ethylene glycol) (PEG)‐water two‐phase system was measured by the gel permeation chromatography (GPC). The aqueous two‐phase of PAAm‐PEG‐water system can be easily formed. The critical concentration of phase separation was affected by the molecular weight of PEG. The aqueous two‐phase polymerization of acrylamide (AAm) has been successfully carried out in the presence of PEG by using ammonium persulfate (APS) as the initiator. The polymerization behaviors with varying concentration of AAm, initiator and PEG, the polymerization temperature, the molecular weight of PEG, and emulsifier types were investigated. The activation energy of aqueous two‐phase polymerization of AAm was 132.3 kJ/mol. The relationship of initial polymerization rate (R_p0) with APS and AAm concentrations was R_p0 ∝ [APS]^0.72 [AAm]^1.28. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Novel modification of polybut‐1‐ene using auto‐oxidation controlled by addition of limonene monomer

Free radical graft polymerization has been used as a modification method to incorporate functional groups into polyolefins using a melt‐mixing process. The presence of oxygen simultaneously brings about auto‐oxidation during the polymerization. Although functional groups such as ketones are easily incorporated into polyolefin chains by auto‐oxidation, the method is rarely employed because of the difficulty of handling. In the study reported here, a novel modification of polybut‐1‐ene (PB) was performed using auto‐oxidation controlled by the addition of limonene monomer. The modified PB samples were prepared using 2,2′‐azobis(2‐methylpropionitrile), benzyl peroxide, tert‐butyl peroxide (TBPO) and Nd₂O₃/dicumyl peroxide (DCP) radical initiators in air. It was found that excessive auto‐oxidation was suppressed by the presence of the limonene, and that the greatest numbers of grafted groups were contained in the modified PB samples prepared using TBPO and Nd₂O₃/DCP. The samples obtained showed slower crystallization behavior and slower crystal–crystal transformation rates, respectively. In addition, the modified PB sample prepared using Nd₂O₃/DCP showed less ductile behavior than that prepared using TBPO because of a much slower transformation rate. Copyright © 2009 Society of Chemical Industry     

Fe‐mediated SET‐LRP of MMA and St in the presence of air

In this work, well‐defined homopolymers of methyl methacrylate (PMMA) and styrene (PSt) were prepared via single‐electron‐transfer living radical polymerization using CCl₄ as initiator and Fe(0)/N, N, N′,N′‐tetramethyl‐1,2‐ethanediamine as catalyst. The polymerization was conducted at 25 °C in N,N‐dimethylformamide in the presence of air. It proceeded in a ‘living’ manner, as indicated by the first‐order kinetics behavior, and the linear increase of the number‐average molecular weight (M_{n, GPC}) with conversion was close to the theoretical M_{n, theory}. Solvent and additives have a profound effect on the polymerization. In addition, the PMMA and PSt obtained remained of low dispersity. The chain‐end functionality of the obtained homopolymer of PMMA was characterized by proton nuclear magnetic resonance. A block copolymer of P(MMA‐block‐St) was achieved by using the obtained PMMA as macroinitiator. The living characteristics were further demonstrated by chain extension experiments. Copyright © 2012 Society of Chemical Industry     

Synthesis of poly(methyl methacrylate) nanoparticles initiated by azobisisobutyronitrile using a differential microemulsion polymerization technique

Nanosized poly(methyl methacrylate) (PMMA) particles with a high molecular weight of 10⁶ g mol^?1 and a polydispersity index of about 1–2 were synthesized, for which 2,2′‐azobisisobutyronitrile was used as the initiator and a differential microemulsion polymerization technique was employed. The kinetics of the polymerization, the glass transition temperature, tacticity, the particle size distribution, and the morphology of the nanosized PMMA synthesized were investigated. The dependence of the number of the polymer particles (N_p) and the number of the micelles (N_m) on the concentration of the surfactant was discussed. The molecular weight distribution was found to be nearly constant over the polymerization time, which was attributed to the significance of micellar polymerization. The resultant nanosized PMMA has a rich syndiotactic configuration (53–57% rr triads) with a glass transition temperature of about 125°C. A beneficial operation condition was discovered where the conversion reached a maximum at a high monomer‐to‐water ratio. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Poly(vinylbenzylchloride) beads grafted with polymer brushes carrying hydrazine ligand for reversible enzyme immobilization

Poly(glycidylmethacrylate), p(GMA), brush grafted poly(vinylbenzyl chloride/ethyleneglycol dimethacrylate), p(VBC/EGDMA), beads were prepared by suspension polymerization and the beads were grafted with poly(glycidyl methacrylate), p(GMA), via surface‐initiated atom transfer radical polymerization aiming to construct a material surface with fibrous polymer. The epoxy groups of the fibrous polymer were reacted with hydrazine (HDZ) to create affinity binding site on the support for adsorption of protein. The influence of pH, and initial invertase concentration on the immobilization capacity of the p(VBC/EGDMA‐g‐GMA)‐HDZ beads has been investigated. Maximum invertase immobilization onto hydrazine functionalized beads was found to be 86.7 mg/g at pH 4.0. The experimental equilibrium data obtained invertase adsorption onto p(VBC/EGDMA‐g‐GMA)‐HDZ affinity beads fitted well to the Langmuir isotherm model. It was shown that the relative activity of immobilized invertase was higher than that of the free enzyme over broader pH and temperature ranges. The K_m and V_max values of the immobilized invertase were larger than those of the free enzyme. After inactivation of enzyme, p(VBC/EGDMA‐g‐GMA)‐HDZ beads can be easily regenerated and reloaded with the enzyme for repeated use. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009