Utilization of organically stabilized proteinous solid waste for the treatment of coloured waste‐water

BACKGROUND: Solid waste emanating from tanneries contains a high percentage of protein with raw trimmings from hides constituting a significant percentage of the solid waste. In this study, organically stabilized trimmings (OST) have been used as an adsorbent material for removal of colour from waste‐water. RESULTS: Various parameters such as adsorbent dosage, dye concentration and pH have been optimized. The effect of neutral salts on the dye adsorption capacity of OST has also been studied. The adsorption of dye by OST follows the Freundlich isotherm. More than 99% removal of colour has been achieved. Commercial trials prove the potential use of organically stabilized trimmings for the treatment of colored wastewater. CONCLUSIONS: Dye loaded OSTs have been employed in the manufacture of a tanning salt, which can be used in the leather industry. Thus, a holistic solution to the challenging solid waste disposal problem has been developed. Copyright © 2009 Society of Chemical Industry     

Removal of Cr(VI) from aqueous solution by London plane leaves

The effect of initial metal concentration, contact time and solution temperature on the removal of Cr(VI) from solution by waste London plane leaves, generated by the pruning of street trees, was investigated in batch mode conditions. The removal of Cr(VI) was highly concentration‐dependent and mainly governed by physico‐chemical adsorption under the weak acidic conditions studied. The equilibrium data fit well in the Langmuir isotherm model. The Langmuir constants were calculated at different temperatures and both the adsorption capacity and adsorption intensity increased with rising temperature. The endothermic nature of the Cr(VI) adsorption was confirmed by the thermodynamic parameters. The study has shown that the waste leaves can be used as an effective adsorbent for removal of Cr(VI) from wastewater. Copyright © 2003 Society of Chemical Industry     

Studies on defluoridation of water by coal‐based sorbents

Drinking water containing fluoride above a level of 1 mg dm^?3 is considered to be unsafe for human consumption. Higher intake of fluoride can cause potential health hazards. The conventional processes of fluoride removal from water are ion exchange, reverse osmosis and electro‐dialysis. However, the utility of these processes has been limited due to their expensive operation and subsequent disposal problem of the waste brine generated. Defluoridation of water samples by coal‐based sorbents was studied at different adsorbent dosages. First‐order adsorption rate constants using the Lagergren equation, the Freundlich adsorption isotherm, the Langmuir adsorption isotherm, film diffusion and pore diffusion coefficients have been evaluated for each system. The effect of pH on fluoride removal and the mechanism has also been discussed. Copyright © 2001 Society of Chemical Industry     

Investigation of adsorption of lead,mercury and nickel from aqueous solutions onto carbon aerogel

Recently a new form of activated carbon has appeared: carbon aerogel (CA). Its use for the removal of inorganic (and especially metal ions) has not been studied. In the present study, the adsorption of three metal ions, Hg(II), Pb(II) and Ni(II), onto carbon aerogel has been investigated. Batch experiments were carried out to assess adsorption equilibria and kinetic behaviour of heavy metal ions by varying parameters such as agitation time, metal ions' concentration, adsorbent dose and pH. They facilitated the computation of kinetic parameters and maximum metal ion adsorption capacities. Increasing the initial solution pH (2–10) and carbon concentration (50–500 mg per 50 cm³) increases the removal of all three metal ions. A decrease of equilibrium pH with an increase of metal ion concentration led us to propose an adsorption mechanism by ion exchange between metal cations and H⁺ at the carbon aerogel surface. Carboxylic groups are especially involved in this adsorption mechanism. Langmuir and Freundlich isotherm models were used to analyse the experimental data of carbon aerogel. The thermodynamics of the metal adsorption was also investigated for the practical implementation of the adsorbent. The sorption showed significant increase with increase of temperature. Kinetics models describing the adsorption of Hg(II), Pb(II) and Ni(II) ions onto carbon aerogel have been compared. Kinetics models evaluated include the pseudo‐first order and second order model. The parameters of the adsorption rate constants have been determined and the effectiveness of each model assessed. The result obtained showed that the pseudo‐second order kinetic model correlated well with the experimental data and better than the pseudo‐first order model examined in the study. Mass transfer coefficients obtained can be useful in designing wastewater treatment systems or in the development of environmental technologies. Copyright © 2005 Society of Chemical Industry     

Chemically modified organic/inorganic nanoporous composite particles for the adsorption of reactive black 5 from aqueous solution

In the present work, we report a chemically modified polyacrylamide/silica nanoporous composite adsorbent for the removal of reactive black 5 (RB5) azo dye from aqueous solutions. The composite adsorbent was synthesized in a packed bed and modified by ethylenediamine (EDA). The adsorbent was characterized by Fourier transformation infrared (FT-IR), thermogravimetric analysis (TGA), thermoporometry, Brunauer, Emmett and Teller (BET) method and scanning electron microscopy (SEM). Mechanical stability of the adsorbent was examined in a packed bed by following the back-pressure of the column. Pore diameter of the composite adsorbent in dry and wet states was estimated to be about 18.71 nm and 12.61 nm, respectively. Adsorption experiments were performed in batch mode and effect of various operational parameters on the adsorption capability of the adsorbent was studied systematically. The maximum adsorption capacity of the modified composites was found to be 454.5 mg RB5/g of adsorbent. The equilibrium data were analyzed by Langmuir, Freundlich, Sips, BET and Redlich–Peterson isotherm models and found to fit well to the BET isotherm. The data kinetically followed the pseudo-second-order model. High adsorption capacity, fast removal mechanism, and good mechanical stability are three advantages of the presented composite for the removal of RB5.     

Removal of aqueous toxic Hg(II) by functionalized mesoporous silica materials

BACKGROUND: Hg(II) is one of the most toxic metals and has received particular attention in environmental pollution. Hg(II) pollution is common in water sources, so rapid and efficient methods must be developed for its removal from water samples. Mesoporous silica (MS) is an ideal adsorbent due to its high surface area and biocompatibility. The efficiency and selectivity of MS adsorbents can be improved by surface modification. RESULTS: A new sorbent for trace Hg(II) removal was developed by grafting 1‐(3‐carboxyphenyl)‐2‐thiourea (CPTU) onto SBA‐15 mesoporous silica. The optimum pH range for Hg(II) adsorption was 3‐7 and the maximum static adsorption capacity was 64.5 mg g^?1. An enrichment factor of 150 was obtained with a relative standard deviation < 1.5% (n = 8). Common coexisting ions did not interfere with the adsorption of Hg(II) under optimal conditions. Quantitative recovery was achieved by stripping with a mixed solution of 1 mol L^?1 HCl and 5% CS(NH₂)₂. Efficient adsorption capacity of the recycled material could still be maintained at a level of 95% at the 7th cycle. CONCLUSION: 1‐(3‐carboxyphenyl)‐2‐thiourea functionalized SBA‐15 mesoporous silica was synthesized and applied for Hg(II) removal from water samples with high efficiency and selectivity. Copyright © 2012 Society of Chemical Industry     

Phosphate removal,mechanism, and adsorption properties of Fe-Mn-Zn oxide trimetal alloy nanocomposite fabricated via co-precipitation method

ABSTRACT

Fe-Mn-Zn oxide trimetal alloy nanocomposite (FMZONC) fabricated and surface properties of the composite material revealed via several characterization methods. Porous nature and alloy type mixing of metals deduced from transmission electron microscopy analysis. Field emission scanning electron microscopy image revealed composite material is of size between 7 and 16 nm. The adsorption properties investigated through isotherm and kinetic experiments. In addition, pH effects and desorption properties were also studied. Maximum adsorption capacity (q max) 149 mg/g for phosphate removal observed at pH 6 and 0.20 g/L of adsorbent. Chemical interaction between metal hydroxide and phosphate elaborated from Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS).     

Removal of methylene blue dye from aqueous solutions by a new chitosan/zeolite composite from shrimp waste: Kinetic and equilibrium study

The adsorption of methylene blue dye (MBD) from aqueous solutions was investigated using a new composite made up of shrimp waste chitosan and zeolite as adsorbent. Response surface methodology (RSM) was used to optimize the effects of process variables, such as contact time, pH, adsorbent dose and initial MBD concentration on dye removal. The results showed that optimum conditions for removal of MBD were adsorbent dose of 2.5 g/L and pH of 9.0, and initial MBD concentration of 43.75 mg/L and contact time of 138.65 min. The initial concentration of dye had the greatest influence on MBD adsorption among other variables. The experimental data were well fitted by the pseudo-second order kinetic model, while the Freundlich isotherm model indicated a good ability for describing equilibrium data. According to this isotherm model, maximum adsorption capacity of the composite was 24.5 mg/g. Desorption studies showed that the desorption process is favored at low pH under acidic conditions.     

Synthesis and application of ion‐imprinted resin based on modified melamine–thiourea for selective removal of Hg(II)

A novel Hg(II) ion‐imprinted resin based on thiourea‐modified melamine was manufactured for selective elimination of Hg²⁺ from aqueous solutions. The polymerizable thiourea–melamine ligand together with its Hg(II) complex were extensively investigated using elemental analysis, Fourier transform infrared (FTIR) and ¹H NMR spectroscopies. The Hg(II) complex was used in a condensation polymerization in the presence of formaldehyde crosslinker and then the Hg(II) ions were leached out from the crosslinked polymeric network to finally leave the ion‐imprinted Hg‐PMTF resin. Both ion‐imprinted Hg‐PMTF and non‐imprinted resins were examined utilizing scanning electron microscopy and FTIR spectroscopy. The potential of the prepared resin for selective separation of Hg(II) ions from aqueous solutions was then evaluated by performing a series of batch experiments. Hg‐PMTF displayed an obvious rapid removal of Hg(II) ions with a pseudo‐second‐order kinetic pattern. In addition, the Langmuir adsorption isotherm model exhibited the best fit with the experimental data with comparatively high maximum adsorption capacity (360.5 mg g^?1). © 2015 Society of Chemical Industry     

Selective removal mercury (II) from aqueous solution using silica aerogel modified with 4-amino-5-methyl-1,2,4-triazole-3(4H)-thion

Silica aerogel surface modifications with chelating agents for adsorption/removal of metal ions have been reported in recent years. This investigation reported the preparation of silica aerogel (SA) adsorbent coupled with metal chelating ligands of 4-amino-5-methyl-1,2,4-triazole-3(4H)-thion (AMTT) and its application for selective adsorption of Hg(II) ion. The adsorbent was characterized by Fourier transform infrared spectra (FTIR) and thermo gravimetric analysis (TGA) measurements, nitrogen physisorption and scanning electron microscope (SEM). Optimal experimental conditions including pH, temperature, adsorbent dosage and contact time have been established. Langmuir and Freundlich isotherm models were applied to analyze the experimental data. The best interpretation for the experimental data given by the Langmuir isotherm equation and the maximum adsorption capacity of the modified silica gel and silica aerogel was 142.85 and 17.24mgg^?1, respectively. Thermodynamic parameters such as Gibbs free energy (ΔG ^o ), standard enthalpy (ΔH ^o ) and entropy change (ΔS ^o ) were investigated. The adsorbed Hg(II) on the SA-AMTT adsorbents could be completely eluted by 1.0M KBr solution and recycled at least four times without the loss of adsorption capacity. The results of the present investigation illustrate that modified silica aerogel with AMTT could be used as an adsorbent for the effective removal of Hg(II) ions from aqueous solution.     

Cadmium adsorption on modified chitosan‐coated bentonite: batch experimental studies

BACKGROUND: Several researchers have investigated the use of chitosan as an adsorbent for removal of heavy metals from aqueous streams. Chitosan flake or powder swells and crumbles making it unsuitable for use in an adsorption column. Chitosan also has a tendency to agglomerate or form a gel in aqueous media. The adsorption capacity can be enhanced by spreading chitosan on physical supports that can increase the accessibility of the metal binding sites. Although several attempts have been made to enhance the adsorption capacity of chitosan, using various chemicals, the sorption capacity for metal ions decreased after cross‐linking of chitosan. RESULTS: Bentonite was coated with chitosan (Chi) and its derivative, 3,4‐dimethoxy‐benzaldehyde (Chi/DMB). The product was then used as adsorbent for the removal of Cd²⁺ from aqueous solutions. The presence of imine groups resulting from chemical modification was confirmed using IR, DRS and SEM. The adsorption followed the Langmuir isotherm and could be described by pseudo‐second order kinetics. CONCLUSION: Chi/DMB coated on bentonite increased the accessibility of metal binding sites. The Chi/DMB/bentonite showed no significant pH dependence in the pH range 2–9, but bentonite coated with chitosan revealed very intensive pH dependence, which had a considerable effect on cadmium removal. As expected adsorption of Cd²⁺ by Chi/bentonite and Chi/DMB/bentonite is dependent on contact time and adsorbent dose. In addition, an EDTA solution is suitable for desorption of cadmium ions, and the reusability of Chi/DMB/bentonite is quite good. © 2012 Society of Chemical Industry     

Two and three‐parameter isothermal modeling for liquid‐phase sorption of Procion Blue H‐B by inactive mycelial biomass of Panus fulvus

Procion Blue H‐B (PBHB) was used as a model reactive dye for biosorption studies onto inactive/dead mycelial biomass of Panus fulvus. Process parameters like pH, contact time and temperature were optimized. pH 2, 150 min of contact time and 35 °C were found to be more favorable for maximum biosorption. Various two‐ and three‐parameter isotherms were employed to understand the biosorption process. Among the various two‐parameter isothermal models applied, the Langmuir isotherm showed the best fit and among the three‐parameter isothermal models, the Khan, Redlich–Peterson, Sips and Toth isotherm models showed similar fits and only the Koble–Corrigan model showed a poor fit. In kinetic studies, pseudo‐first‐order model fitted better than pseudo‐second‐order model. Maximum desorption was observed in alkaline pH, which reveals the possibility of a chemisorption mechanism involved in the removal of PBHB. Among the various desorption media assessed, 70% (v/v) acetone showed complete desorption of the sorbate from the sorbent. Scanning electron microscopy images revealed the non‐fibrous nature of the adsorbent. FT‐IR studies showed the existence of amine groups in the sorbent which are the major adsorbent sites for reactive dyes. Copyright © 2007 Society of Chemical Industry     

The use of toxic solid waste for the adsorption of dyes from waste streams

The use of chromium‐containing toxic solid wastes from the leather industry for the removal of dyes from waste‐waters has been studied. A batch adsorption model has been employed and the role of various experimental parameters on the efficiency of the process evaluated. The extent of dye removal was studied by varying parameters such as pH, contact time, initial concentration of the dye and amount of adsorbent. The experimental equilibrium data for this system has been analyzed using the linearized forms of Langmuir and Freundlich isotherms. The Langmuir isotherm was found to provide the best theoretical correlation of the experimental data and the adsorption was found to follow pseudo‐second‐order kinetics. The dye adsorbed solid wastes were used for the preparation of pigments. In essence, this study provides a greener solution for chromium‐containing solid wastes, dye containing waste‐waters and dye‐adsorbed chromium solid wastes. Copyright © 2007 Society of Chemical Industry     

Synthesis and characterization of polyacrylamide‐grafted coconut coir pith having carboxylate functional group and adsorption ability for heavy metal ions

The present investigation was undertaken to evaluate the effectiveness of a new adsorbent prepared from coconut coir pith (CP), a coir industry‐based lignocellulosic residue in removing metal ions from aqueous solutions. The adsorbent (PGCP‐COOH) having a carboxylate functional group at the chain end was prepared by grafting polyacrylamide onto CP using potassium peroxydisulphate as an initiator and in the presence of N,N′‐methylenebisacrylamide as a crosslinking agent. The adsorbent was characterized by infrared (IR) spectroscopy, thermogravimetry (TG), X‐ray diffraction (XRD) patterns, scanning electron microscopy (SEM), and potentiometric titration. The adsorbent exhibits very high adsorption potential for the removal of Pb(II), Hg(II), and Cd(II) ions from aqueous solutions. The optimum pH range for metal ion removal was found to be 6.0–8.0. The adsorption process follows a pseudo‐second‐order kinetic model. The adsorption capacities for Hg(II), Pb(II), and Cd(II) calculated using the Langmuir isotherm equation were 254.52, 189.49, and 63.72 mg g^?1, respectively. Adsorption isotherm experiments were also conducted for comparison with a commercial carboxylate form cation exchanger. Different industry wastewater samples were treated by the PGCP‐COOH to demonstrate its efficiency in removing heavy metals from wastewater. The reusability of the PGCP‐COOH was also demonstrated using 0.2M HCl. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3670–3681, 2007     

Adsorption of aluminium from wastewater by chitin and chitosan produced from silkworm chrysalides

Chitin, extracted from silkworm chrysalides, was employed for the production of a high‐purity and porous chitosan, as observed by scanning electron microscopy. Chitin and the chitosan produced from it were also analysed using ¹³C NMR spectroscopy to show the efficiency of deacetylation. The extracted chitin was investigated as an adsorbent material for aluminium removal from textile wastewater, by the column chromatographic method. After the treatment, the residual aluminium was lower than the limitation criterion of 0.2 mg L^?1. The isotherms of adsorption on chitin and chitosan surfaces were investigated and the best fits were observed using the Freundlich isotherm. At pH 5.0, the maximum adsorption capacity was 21.3 mg of aluminium per gram of chitosan over 70 h of experiments. Copyright © 2006 Society of Chemical Industry     

Adsorptive Removal of Mercury(II) Ions from Water and Wastewater by Polymerized Tamarind Fruit Shell

Abstract

A novel adsorbent, formaldehyde polymerized tamarind fruit shell (FPTFS) containing sulphonic acid functional groups was prepared and its utility for Hg(II) adsorption from water and wastewater was investigated. The kinetic and isotherm data, obtained at optimum pH value 6.0 for different concentrations and temperatures, could be fitted with the Ritchie modified second-order equation and Sips isotherm model respectively and the coefficients indicated favorable adsorption of Hg(II) on the FPTFS. The complete removal of 23.86 mg/L Hg(II) from chlor-alkali industry wastewater was achieved by 4 g/L FPTFS. The reusability of the FPTFS for several cycles was also demonstrated using 0.1 M HCl solution.     

Removal of methylene blue from aqueous solution by adsorption onto zeolite synthesized from coal fly ash and its thermal regeneration

BACKGROUND: The removal of cationic dyes from wastewater is of great importance. Three zeolites synthesized from coal fly ashes (ZFAs) were investigated as adsorbents to remove methylene blue (MB), a cationic dye, from aqueous solutions. Experiments were conducted using the batch adsorption technique under different conditions of initial dye concentration, adsorbent dose, solution pH, and salt concentration. RESULTS: The adsorption isotherm data of MB on ZFAs were fitted well to the Langmuir model. The maximum adsorption capacities of MB by the three ZFAs, calculated using the Langmuir equation, ranged from 23.70 to 50.51 mg g^?1. The adsorption of MB by ZFA was essentially due to electrostatic forces. The measurement of zeta potential indicated that ZFA had a lower surface charge at alkaline pH, resulting in enhanced removal of MB with increasing pH. MB was highly competitive compared with Na⁺, leading to only a < 6% reduction in adsorption in the presence of NaCl up to 1.0 mol L^?1. Regeneration of used ZFA was achieved by thermal treatment. In this study, 90–105% adsorption capacity of fresh ZFA was recovered by heating at 450 °C for 2 h. CONCLUSION: The experimental results suggest that ZFA could be employed as an adsorbent in the removal of cationic dyes from wastewater, and the adsorptive ability of used ZFA can be recovered by thermal treatment. Copyright © 2010 Society of Chemical Industry     

Comparative studies of Oryza sativa L. husk and chitosan as lead adsorbent

The adsorption capacity of two low‐cost adsorbents, Oryza sativa L. husk and chitosan, was studied. Lead solution was used as the adsorbate. The effect of initial lead concentration, pH, temperature, weight of adsorbent, particle size and contact time on lead uptake was investigated. It was found that the isotherm data were well described by the Freundlich isotherm for both adsorbents. The adsorption capacities of rice husk and chitosan were 5.69 and 8.31 mg g^?1, respectively. It was shown that chitosan was more effective than rice husk. Copyright © 2005 Society of Chemical Industry     

Biosorption of phenolic compounds from aqueous solutions onto chitosan–abrus precatorius blended beads

BACKGROUND: This research focuses on understanding the biosorption process and developing a cost‐effective technology for the treatment of water contaminated with phenolic compounds (phenol, 2‐chlorophenol and 4‐chlorophenol), which are discharged into the aquatic environment from a variety of sources and are highly toxic. In order to remove phenolic compounds from water, a new biobased sorbent is developed, blending chitosan with abrus precatorius, both naturally occurring biopolymers. The resulting chitosan–abrus precatorius blended beads (CS/Ab) were characterized by Brunauer, Emmett and Teller (BET) analysis, Fourier Transform Infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) techniques under batch equilibrium and column flow experimental conditions. The binding capacity of the biosorbent was investigated as a function of initial pH, contact time, initial concentration of adsorbate and dosage of adsorbent. RESULTS: The percentage removal of phenol, 2‐CP and 4‐CP increased with increasing adsorbent dose, while the adsorption capacity at equilibrium, q_e (mg g^?1) (amount of phenol, 2‐CP and 4‐CP loaded per unit weight of adsorbent) decreased. The equilibrium time was found to be 240 min for full equilibration of all adsorbates. Adsorption kinetic and isotherm studies showed that the pseudo‐first‐order model and the Langmuir isotherm were the best choices to describe the adsorption behaviors. The maximum monolayer adsorption capacity of phenol, 2‐CP and 4‐CP on to the (CS/Ab) beads was found to be 156 mg g^?1, 204 mg g^?1 and 278 mg g^?1, respectively. CONCLUSION: The experimental results suggested that (CS/Ab) blended beads are effective in the removal of phenolic compounds from aqueous medium. Copyright © 2009 Society of Chemical Industry     

Arsenic adsorption from contaminated water on Fe(III)‐coordinated amino‐functionalized poly(glycidylmethacrylate)‐grafted TiO2‐densified cellulose

BACKGROUND: The main aim of this study is to determine the sorptive potential of a novel anion exchanger, Fe(III)‐coordinated amino‐functionalized poly(glycidylmethacrylate)‐grafted TiO₂‐densified cellulose (AM‐Fe‐PGDC) for arsenic(V) removal from aqueous solutions by batch technique. RESULTS: The adsorbent was characterized using infrared spectroscopy, powder X‐ray diffraction, scanning electron microscopy, thermogravimetry and potentiometric titrations. The effective pH for removal was 6.0. The adsorption rate was influenced by initial metal ion concentration and contact time. The equilibrium was achieved within 1.5 h and follows a pseudo‐second‐order kinetic model. The adsorption capacity for As(V) calculated using the Langmuir isotherm equation was 105.47 mg g^?1. The AM‐Fe‐PGDC developed was used to remove As(V) from simulated groundwater. Regeneration experiments were attempted for four cycles using 0.1 mol L^?1 NaCl solution. CONCLUSION: It was found that AM‐Fe‐PGDC is very efficient for the removal of As(V) from aqueous solutions. © 2012 Society of Chemical Industry