Numerical calculation of a generalized thermal model of radio-electronic apparatus

A method is proposed for numerical calculation of the temperature field of a generalized model of electronic equipment with high component density.Notation x,y,z,x,y spatial coordinates, m - time, sec - L_x, L_v, L_z dimensions of heated zone, m - _x, _y, _z effective thermal-conductivity coefficients of heated zone, W/m·deg - ₂ thermal conductivity of chassis, W/m·deg - a _z thermal diffusivity of heated zone along z axis, m²/sec - c₁ effective specific heat of heated zone, J/kg·deg - ₁ effective density of heated zone, kg/m³ - c₃, ₃, c₂, ₂ thermophysical characteristics of cooling agent and chassis, J/kg·deg·kg/m³ - q_v(x, ), q(x, y) volume heat-source distribution, W/m³ - q_s (x) surface heat-source distribution, W/m² - p number of cooling agent channels - Fo Fourier number - Bi Biot number - Uⁱ coolant velocity in i-th channel, m/sec - T₁(x, ), T₂(x, ), T₃(x, ) temperature distribution of heated zone, chassis, and coolant, °K - T₃₀, T₁₀(x), T₂₀(x) initial temperatures, °K - T_3in coolant temperature at input to channel, °K - T_T(x) effective temperature distribution of heat loss elements, °K - T_C temperature of external medium, °K - dimensionless heated zone temperature - _v(x) local volume heat exchange coefficient, W/m³·deg - ₁₂(x), _1C(x), _1T(x) heat liberation coefficients - W/m²·sec; ₂₁(x, y), _2c(x, y), _2T(x, y) volume heat-exchange coefficients of chassis with heated zone, medium, and cooling elements, W/m³·deg Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 40, No. 5, pp. 876–882, May, 1981.     

Systematic derivation of contour integration formulae for laplace and elastostatic gradient BIE's

A complete set of contour integrands is derived for the primary BIE's of elastostatics and potential flow. Because of surface-independent properties of vector potentials, these apply to nonplanar surfaces and can be differentiated at the fixed point, producing contour integrands for both the so-called hypersingular and Cauchy singular parts of the gradient BIE. The results are applicable to far field, near field and on surface cases. Numerical examples demonstrate exact agreement with surface quadrature, and contour plots are given showing variation of the hypersingular integrands in on surface cases.     

Thermal stresses in a thin circular disc of orthotropic material due to an instantaneous point heat source

Summary In this paper, we have analysed the transient plane thermal stress problem of a circular disc of orthotropic material with instantaneous point heat source. The variation of with time along different radius vectors is exhibited graphically and compared with that of the isotropic case.

---

Wärmespannungen in einer dünnen Kreisscheibe aus orthotropem Material zufolge einer punktförmigen instantanen Wärmequelle

Zusammenfassung In dieser Arbeit wurde das instationäre ebene Wärmespannungsproblem einer Kreisscheibe aus orthotropem Material zufolge einer punktförmigen instantanen Wärmequelle untersucht. Die Veränderung von über die Zeit für verschiedene Radien ist graphisch dargestellt und wird mit dem isotropen Fall verglichen.

---

Nomenclature r, polar coordinates - T temperature rise - ² ratio of conductivities - ² thermal diffusivity in -direction - J _n Bessel function ofn-th order - t time - p introduced in equation (2) - h heat transfer coefficient - a radius of circular disc - f(r, ) temperature distribution at initial state - r ₀, ₀ a point on the disc - T ₀ strength of point heat source - Dirac delta function - F stress function in two dimensions - ₁, ₂ coefficient of thermal expansion - a ₁₁,a ₁₂,a ₂₂,a ₆₆ elastic constants With 9 Figures     

The morphology of α′ martensite in a two-phase (α+γ) Fe-Cr-Ni stainless steel

Both lath-shaped and martensites are induced by tensile deformation within of a two-phase ( + ) Fe-Cr-Ni stainless steel, forms from the through the at an intersection of two crystals. These are observed both when is surrounded by and when borders . The amount of strain at which both and nucleate, increases with test temperatures in the range –196 to 50° C. Adjacent laths are either twin-related, or 5, 9, 15 or 19° off the twin relationship, as found by analysing electron diffraction patterns.     

High-frequency dielectric properties of Mg-Al-Si,Ca-Al-Si and Y-Al-Si oxynitride glasses

Recently developed coaxial line techniques [1] have been used to determine, at room temperature, the values of the real () and imaginary (') parts of the dielectric constants for some Mg-Al-Si, Ca-Al-Si and Y-Al-Si oxynitride glasses over the frequency range 500 MHz to 5 GHz. The frequency dependencies of and ' are consistent with the universal law of dielectric response in that (-_t8)^(n–1) and '^(n–1) for all glass compositions; the high experimental value of the exponent (n=1.0±0.1) suggests the limiting form of lattice loss [2] situation. In this frequency range, as previously reported [3] at longer wavelengths, the addition of nitrogen increases the dielectric constant, (); in both the oxide and oxynitride glasses is also influenced by the cation, being increased with cation type in the order magnesium, yttrium, calcium as at lower frequencies.     

The mechanism of continuous dissolution of the lamellar structure in aged Al 22 at% Zn alloy

The mechanism of continuous dissolution was studied using transmission electron microscopy, X-ray diffraction and hardness measurements. The metastable phase was identified in the first stage of dissolution nucleating at the - boundaries. Interface dislocations at the - boundaries forming a perpendicular net in the 110 directions were identified as of screw character and of Burgers vector b=1/2a 110. During dissolution a change of shape of precipitates occurs leading to their fragmentation and to a change of the direction of boundaries into 110 directions.     

The comparative impact of scientific publications and journals: Methods of measurement and graphical display

A method is presented to display the comparative impact of scientific publications relative to their environment (e.g., journals). Furthermore, the method gives a new approach to the establishment of a journal's impact as measured by received citations. Moreover, in this impact measurement a differentiation between various types of publications (editorials and letters, normal papers, reviews, etc.) can be made. It is argued that the method presented is more useful for library and research evaluation policies than the ISI impact factor.     

Coaxial variable-length resonator for determining the electromagnetic parameters of materials at normal and higher temperatures

Conclusions It is possible by means of the above resonator, according to our analysis and in the absence of air gaps between the sample and the line, to evaluate the real components and of permeability and permittivity respectively in the range of 2 to 100 with an error between ±3% and ±10% in the temperature range from room temperature to +400°C, and the imaginary components and (for tan and tan in the range of 0.001 to 2) with an error of 7 to 20% over the same temperature range.     

Mapping co-word structures: A comparison of multidimensional scaling and leximappe

The LEXIMAPPE method and Multidimensional Scaling (MDS) are discussed as methods to visualize (map) characteristics of structures of word-occurrence (co-word) relations. Utilization of MDS is proposed as an alternative mapping method able to circumvent problematic features of LEXIMAPPE maps of the total co-word structure. A comparison of both methods on the same real-life co-word matrix demonstrates topological advantages of an extended MDS-mapping.     

Torsional load transfer from a rigid shaft to an elastic plane with a slit

A plane elastostatic problem for an elastic wedge loaded by a concentrated moment at its apex provides an example of violation of the Saint-Venant principle for apex angles 2 larger than . Considering the problem for a truncated wedge, Neuber demonstrated the method of construction of an applicable solution for any apex angles in the range 22, despite the failure of the Saint-Venant principle. In the present paper the particularly important case of the truncated-wedge problem is examined. The truncated wedge degenerates into a slitted elastic plane, while a rigid circular shaft, acted upon by a torsional moment, is inserted into the plane. The analytical solution of the mixed boundary-value problem is obtained. Numerical results turn out to be in complete agreement with Neuber's results for the slitted elastic plane.     

Singularity parametersε andκ for interface cracks in transversely isotropic piezoelectric bimaterials

Two parameters, and (Suo et al., 1992), are of key importance in fracture mechanics of piezoelectric material interfaces. In this paper, it is shown, for any transversely isotropic piezoelectric (TIP) bimaterial, that one of the two parameters and always vanishes but the other one remains non-zero. Physically, it means that the non-oscillating crack-tip generalized stress field singularity exists for some TIP bimaterials (with vanishing ). Consequently, TIP bimaterials can be classified into two classes: one with vanishing performed crack tip generalized stress field oscillating singularity and the other one with vanishing is independent from the oscillating singularity. Some numerical results for and are given too.     

A superconducting vibrating reed applied to flux-line pinning. I. Theory

A theoretical treatment is given of a superconducting reed clamped at one end and performing flexural vibrations in a homogeneous longitudinal magnetic fieldB _a. When the flux lines are rigidly pinned the reed behaves like an ideal diamagnet whose bending distorts the external field. This generates a magnetic restoring force (line tension) B _a ² which is independent of the reed thicknessd, whereas the mechanical restoring force (stiffness) is d ³. Therefore, the resonance frequency /2 of a thin superconducting reed increases drastically when a fieldB _a is applied, or for a givenB _a, when the reed is cooled below its critical temperatureT _c. With decreasing pinning strength (characterized by Labusch's parameter ) the resonance frequency decreases, ²²– _pin ² where _pin ^{2 –1}, and an attenuation _v ^–2 occurs due to the viscous motion of flux lines. For larger vibration amplitudes an additional, amplitude-dependent damping _h ^–3 occurs due to the hysteretic losses caused by elastic instabilities during flux motion.On leave from Centro Atómico, Bariloche, Argentina.     

Anisotropic spin diffusion and multiple spin echoes in3He-4He solutions

We propose a ₁-t₁-₂ pulse-NMR experiment to detect the spin-diffusion anisotropy, =D-D, in degenerate spin-polarized³He-⁴He mixtures, where D and dare the transverse and longitudinal spin diffusion coefficients. In such an experiment the nonlinearity of the dynamics produces multiple spin echoes (MSE). At the ³He concentration x₃ 4% the spinrotation parameter vanishes (M 0), so that the nonlinearity of the equations of motion is entirely due to the anisotropy. In this situation, detection of MSE amounts to observation of D. For slight anisotropy, i.e. D/D 0.25, we use a perturbation scheme similiar to that developed by Einzel et al. (in that case, for small M and small demagnetizing field) to calculate the second and third echo heights. For larger anisotropy we numerically calculate the echo heights. We find that for D/D = 0.5 the heights are 2 % of the first echo, and should be detectable. The (₁, ₂) tip-angle dependence of the D echoes is different from that of the M and demagnetization echoes, and furthermore, they occur at right angles to these echoes (in spin space). Thus, even when small spin-rotation and demagnetization effects are present, the ₁-t₁-₂ experiment provides a sensitive means of detecting the anisotropy.     

Phase transformation and impact properties of type 17-8-2 austenitic weld metals

The influence of stress relieving and ageing treatments in the range 600 to 900° C on the phase transformations and change in room temperature impact properties has been studied for two manual metal arc 17-8-2 weld metals. The transformation of the-ferrite in the range 600 to 800° C was found to conform to a classical Johnson-Mehl equation; the initial precipitates were M₂₃C₆ carbides followed by the intermetallic-phase. At higher temperatures a slower transformation rate was found suggesting a C curve type of behaviour and the dominant intermetallic phase changed to. Room temperature impact toughness values were found to change with ageing time. Below 800° C there was a consistent fall in these values which became very marked when the-phase developed at the/-boundaries, Above 800° C, spherodization of the carbides and intermetallic phases delayed the fall in the impact values, and led to significant increases in the early stages of ageing. Scanning electron microscopy confirmed that the change from ductile to brittle fracture mode was normally associated with the development of the and phases, but at 600° C the fall in impact properties could be atrributed to carbide development.     

Temperature dependence of surface impedance Z(T, ω) and mean free paths I(T) of YBCO-superconductors

The surface impedance Z(T,) at 10 and 145 GHz and between 4 and 300 K is obtained experimentally. Z(T_aTT_c) is quantitatively fitted by the BCS theory with a mean free path I(T) increasing rapidely below T_c. This I-increase in the frame of the BCS-theory is limited at T_a by inelastic surface scattering at weak or strong links, e.g., by twin boundaries in distances a_TW which dominates scattering for a_Tw2I(T_a). Below T_a the enforced energy transfer from YBCO-crystallites to weak links may enhance Z(Ta) until at T T* the weak link surface impedance dominates Z_res(T相似文献   

Craze intersections in biaxially-stressed polystyrene

Crazes are produced on two orthogonal planes in both thin film and macroscopic samples of polystyrene by sequentially applying two orthogonal tensile strains ₁ and ₂. Although many crazes produced by the second strain ₂ (secondary crazes) are stopped when they meet a primary craze, some intersections occur. The fraction of craze meetings resulting in intersection increases from 20% at ₁= ₂=3% to 55% at ₁= ₂=5%; intersections also occur preferentially in thin regions of primary crazes. The craze fibril structure in the intersection has a much lower fibril volume fraction, v _f, than either of the two crazes from which it formed. The fibril volume fraction in the intersection is approximately given by the product of the fibril volume fractions of the two crazes, in agreement with a prediction based on the surface drawing mechanism of craze thickening. At higher strain levels the v _fs of the intersections are lower, leading to higher fibril stresses and enhanced fibril fracture; an increasing fraction of intersections breaks down to form large voids at these higher strain levels. Fractography of macroscopic samples containing intersecting crazes demonstrates that voids formed at the intersections can act as nuclei for cracks causing premature fracture of the material.     

Paramagnetic resonance in a “dirty” spin-glass

For a spin-glass with nonmagnetic defects (n _m ^1/3l 1, where n _m is the magnetic impurity concentration and l is the mean free path) an absorption function () is derived. Three ranges of temperature and external magnetic field are considered. In the vicinity of the transition the value of () d is estimated as a function of temperature and field.     

Polypyrrole Based Microwave Absorbers

Reflection of microwave radiations from single layer and two-layer materials is calculated. Microwave absorbing materials are formulated by mixing a commercially available paint or rubber with the conducting polypyrrole (PPy) powder. The reflection loss strongly depends on thickness and complex permittivity of the material. For a single layer material, optimum values of the real part, , and imaginary part, , of the complex permittivity are found by calculations which lead to a minimum reflectivity at a given sample thickness. The ability to readily tailor the conductivity of the PPy powder enables the design of microwave absorbers according to theoretical desired values of and . A paint panel containing 2 wt% of PPy powder with a thickness of 2.5 mm exhibits a reflectivity < – 10 dB (i.e. at least 90% absorption of the incident radiation) over 12 to 18 GHz. Blending and milling during the manufacturing process can destroy the original fibrous shape of PPy aggregates leading to low radiation absorption. In an attempt to achieve a broadband absorber, a two-layer system consisting of a first layer containing PPy powder and a second layer containing carbonyl iron has been fabricated.     

A note on the utility of international publication data

This note focuses on a possible limitation of international publication data as a measure of research activity. It is argued that differences in the pressure and/or capacity to publish may exist between countries which would necessitate the standardization of publication data on a country basis. The argument is supported by statistical tests performed on data recently utilized to measure agricultural scientific research activity.     

Amplifier based on a field-effect triode with negative current feedback

Conclusions A field-effect triode amplifier with series negative current feedback allows a voltage gain of the order of 200–300 to be obtained for a load resistance R_s1 M. The coefficient K_u begins to decrease noticeably only for a feedback resistance above 500 .The current gain reaches (8–10)·10³. Increasing the resistances R_s and R_L to hundreds of ohms has practically no effect on K_i. For a further increase of R_s and R_L the coefficient K_i decreases.The power gain reaches its maximum value (of the order of 10⁴ or more) for R_s100 and R_L=10–100 k. An increase in R_s leads to a reduction of K_pmax and to a shift of the extremum of the function K_p=f(R_L) into the range of higher values of R_L.A large input resistance of the amplifier (tens of megohms and higher) is obtained when R_s increases to 10–100 M. The maximum input resistance is obtained for R_L and R_s and may exceed values of from hundreds of megohms to several gigaohms. The minimum input resistance is hundreds of kilohms for R_L and R_s0.The minimum input resistance (5–10 k or less) is ensured for R_g and R_L0. An increase of the output resistance to hundreds of megohms or higher occurs for R_g and R_s.Translated from Izmeritel'naya Tekhnika, No. 9, pp. 67–70, September, 1971.