Microwave Dielectrics in the (La1/2Na1/2)TiO3–Ca(Fe1/2Nb1/2)O3 System

Dielectric properties of the system (1 − x)(La_1/2Na_1/2)TiO₃– _x Ca(Fe_1/2Nb_1/2)O₃, where 0.4 # x # 0.6, have been investigated at microwave frequencies. The temperature coefficient of resonant frequency (τ_f), nearly 0 ppm/°C, was realized at x = 0.58. These ceramics had perovskite structure and showed relatively low dielectric losses. A new dielectric material applicable to microwave devices having Q · f of 12000–14000 GHz and a dielectric constant (ε_r) of 59–60 has been obtained at 1300–1350°C for 5–15 h sintering.     

Dielectric Properties of Ceramics in Ba (Co1/3 Nb2/3)O3–Ba(Zn1/3Nb2/3)O3 Solid Solution

The dielectric properties of the Ba (Co_1/3 Nb_2/3)O₃–Ba(Zn_1/3Nb_2/3)O₃ system were determined. Ba (Co_1/3 Nb_2/3)O₃–Ba(Zn_1/3Nb_2/3)O₃ has a complex perovskite structure, a high dielectric constant, a low dielectric loss, and a low temperature coefficient of the resonant frequency. A solid-solution ceramic with 0.7Ba (Co_1/3 Nb_2/3)O₃·0.3 Ba(Zn_1/3Nb_2/3)O₃ has a dielectric constant of K=33.5, Q=11000 at 6.5 GHz, and a temperature coefficient of the resonant frequency of τ_f=0 ppm/°C. The temperature coefficient of resonant frequency can be varied by changing the composition. The Q values of the ceramics can be increased by annealing in a nitrogen atmosphere. These ceramics can be used for resonant elements and stabilized oscillators.     

Effects of Calcium Substitution on the Structural and Microwave Dielectric Characteristics of [(Pb1−xCax)1/2La1/2](Mg1/2Nb1/2)O3 Ceramics

The effects of calcium substitution on the structural and microwave dielectric characteristics of [(Pb_{1− x} Ca _x )_1/2La_1/2](Mg_1/2Nb_1/2)O₃ ceramics (with x = 0.01–0.5) were investigated. All the materials were observed to have an ordered A(B_1/2^'B_1/2^")O₃-type perovskite structure; however, the space group of the structure changed from Fm 3 m to Pa 3 as the calcium content increased to x = 0.1, and then from Pa 3 to R 3¯ at the x = 0.5 composition. During the structural evolution, the lattice parameter of the perovskite cell decreased linearly, and the dielectric constant ( k ) also decreased, from k = 80 to k = 38. However, the product of the quality factor and the resonant frequency ( Q × f ) increased from 50 000 GHz to 90 000 GHz as the calcium content increased. Also, the temperature coefficient of resonant frequency (τ_ƒ) gradually changed from 120 ppm/°C to −40 ppm/°C as the calcium content increased. At the x = 0.3 composition, a combination of properties— k ∼ 50, Q × f ∼ 86 000 GHz, and τ_ƒ∼ 0 ppm/°C—can be obtained.     

XRD and Raman Studies on the Ordering/Disordering of Ba(Mg1/3Ta2/3)O3

The samples of complex perovskite Ba(Mg_1/3Ta_2/3)O₃ (BMT) were synthesized at various sintering temperatures and the X-ray diffraction (XRD) patterns and Raman spectra of the samples were collected. Both the structure refinements using the XRD data and the Raman spectra show that the samples sintered above 1500°C with high pellet relative density (>95%) take almost-perfect B-site-ordered structure; while the samples sintered below 1400°C with low pellet relative density (<70%) take the more disordered structure at B-sites. The vibrational modes of 1:2 ordered BMT     were obtained and illustrated by using first-principle calculations. With the assistance of the calculation results, Raman peaks of BMT were assigned as A _1g(1) (107 cm⁻¹), A _1g(2) (212 cm⁻¹), A _1g(3) (433 cm⁻¹), A _1g(4) (798 cm⁻¹), and E _g(1) (104 cm⁻¹), E _g(2) (160 cm⁻¹), E _g(3) (264 cm⁻¹), E _g(4) (386 cm⁻¹), E _g(5) (576 cm⁻¹). The highly ordered BMT sample at B-site shows longer phonon lifetime and weaker coupling among phonons than the disordered BMT, which probably are the intrinsic reasons for the highly ordered BMT sample to have the low dielectric loss.     

Raman Spectroscopic Study of Gallium-Doped Ba(Zn1/3Ta2/3)O3

Resonators of Ba(Zn_1/3Ta_2/3)O₃, sintered between 1450° and 1600°C, are characterized by Raman spectroscopy, X-ray diffraction, and scanning electron microscopy. The quality factors of the resonators are found to depend on sintering temperature, and at 1600°C there is evidence of Zn loss from the surface. The frequency of the A_1g Raman mode changes from 800.9 cm⁻¹ for a sample with Q = 80000 (2 GHz), to 794.5 cm⁻¹ when Q = 44000 (2 GHz). Changes in the position of this and other Raman modes are thought to be due to distortions of the oxygen octahedra, brought about by Zn loss. The presence of a BaTa₂O₆ phase at the surface is confirmed by XRD and SEM.     

Microwave Dielectric Properties of CaTiO3-CaAl1/2Nb1/2O3 Ceramics Doped with Li3NbO4

The microwave dielectric properties of CaTi_{1− x} (Al_1/2Nb_1/2) _x O₃ solid solutions (0.3 ≤ x ≤ 0.7) have been investigated. The sintered samples had perovskite structures similar to CaTiO₃. The substitution of Ti⁴⁺ by Al³⁺/Nb⁵⁺ improved the quality factor Q of the sintered specimens. A small addition of Li₃NbO₄ (about 1 wt%) was found to be very effective for lowering sintering temperature of ceramics from 1450–1500° to 1300°C. The composition with x = 0.5 sintered at 1300°C for 5 h revealed excellent dielectric properties, namely, a dielectric constant (ɛ_r) of 48, a Q × f value of 32 100 GHz, and a temperature coefficient of the resonant frequency (τ_f) of −2 ppm/K. Li₃NbO₄ as a sintering additive had no harmful influence on τ_f of ceramics.     

Dielectric Characteristics of Nd(Zn1/2Ti1/2)O3 Ceramics at Microwave Frequencies

The microwave dielectric properties and the microstructures of Nd(Zn_1/2Ti_1/2)O₃ (NZT) ceramics prepared by the conventional solid-state route have been studied. The prepared NZT exhibited a mixture of Zn and Ti showing 1:1 order in the B-site. The dielectric constant values (ɛ_r) saturated at 29.1–31.6. The quality factor ( Q × f ) values of 56 700–170 000 (at 8.5 GHz) can be obtained when the sintering temperatures are in the range of 1300°–1420°C. The temperature coefficient of resonant frequency τ_f was not sensitive to the sintering temperature. The ɛ _r value of 31.6, the Q × f value of 170 000 (at 8.5 GHz), and the τ_f value of −42 ppm/°C were obtained for NZT ceramics sintering at 1330°C for 4 h. For applications of high selective microwave ceramic resonators, filters, and antennas, NZT is proposed as a suitable material candidate.     

Effect of BaWO4 on the Microwave Dielectric Properties of Ba(Mg1/3Ta2/3)O3 Ceramics

Physical and microwave dielectric properties of complex perovskite Ba(Mg_1/3Ta_2/3)O₃ ceramics have been investigated as a function of the amount of BaWO₄ in the temperature range from 20° to 80°C at 10.5 GHz. Up to 0.05 mol BaWO₄ addition, the lattice constant ratio ( c/a ), ordering parameter, apparent density, and unloaded Q all increase, due to the increase in the substitution of Ta⁵⁺ ions of Ba(Mg_1/3Ta_2/3)O₃ by W⁶⁺ ions from the melted BaWO₄ at above 1430°C. With further addition of BaWO_4, the unloaded Q decreases, due to an increase of the BaWO₄ phase. The temperature coefficient of resonant frequency (TCF) can be controlled by the volume mixture rule of Ba(Mg_1/3Ta_2/3)O₃ and BaWO₄. When 0.09 mol BaWO₄ is added, TCF becomes 0 ppm/°C.     

Microwave Dielectric Properties of a New A5B4O15-Type Cation-Deficient Perovskite Ba2La3Ti3TaO15

High dielectric constant and low loss ceramics with composition Ba₂La₃Ti₃TaO₁₅ have been prepared by a conventional solid-state ceramic route. This compound adopts A₅B₄O₁₅ cation-deficient hexagonal perovskite structure. The dielectric properties of dense ceramics sintered in air at 1520°C have been characterized at microwave frequencies. It shows a relative dielectric constant of ∼45, quality factor Q _u× f of ∼26 828 GHz and temperature variation of resonant frequency of −0.97 ppm/°C.     

The Crystal Structure of LaAlO3-Stabilized La2/3TiO3 Ceramics: An HRTEM Investigation

LaAlO₃-stabilized La_2/3TiO₃ (LT) ceramics were prepared by the conventional mixed oxide route. Small amounts of manganese oxide were added to eliminate Ti⁴⁺ reduction. The powders were calcined at 1150°C and sintered at 1400°–1500°C for 4 h and cooled at rates of 900°–15°C/h. The products were high density and single phase, with an average grain size of 6 μm. The LaAlO₃-stabilized LT ceramics exhibited a relative permittivity (ɛ_r) of 64, a positive temperature coefficient of resonant frequency (τ_f) of 84, and dielectric Q value × resonant frequency ( Q × f ) values of 16 400 GHz. The crystal structure and microstructures have been investigated using high-resolution transmission electron microscopy (HRTEM) in conjunction with X-ray diffraction (XRD). One candidate crystal structure, a ≈2 a _p (where a _p is the lattice parameter of the high-temperature form of the cubic perovskite), b ≈2 a _p, and c ≈2 a _p with a space group Cmmm (65), has been confirmed by XRD, electron diffraction, and lattice imaging techniques. Microtwins, with twin boundaries parallel to the {100} planes, were observed in the microstructures.     

Dielectric Properties of the "Twinned" 8H-Hexagonal Perovskite Ba8Nb4Ti3O24

The dielectric properties of dense ceramics of the "twinned" 8H-hexagonal perovskite Ba₈Nb₄Ti₃O₂₄ are reported. Single-phase powders were obtained from the mixed-oxide route at 1325°C and ceramics (>92% of the theoretical X-ray density) by sintering in air or flowing O₂ at 1400°–1450°C. The ceramics are dc insulators with a band gap >3.4 eV that resonate at microwave frequencies with relative permittivity, ɛ_r∼44–48, quality factor, Q × f _r∼21 000–23 500 GHz (at f _r∼5.5 GHz) and temperature coefficient of resonant frequency, TC _f,∼+115 ppm/K.     

Sr3LaNb3O12: A New Low Loss and Temperature Stable A4B3O12-Type Microwave Dielectric Ceramic

The microwave dielectric properties of dense ceramics of a new A₄B₃O₁₂ type cation-deficient hexagonal perovskite Sr₃LaNb₃O₁₂ are reported. Single-phase powders can be obtained from the mixed-oxide route at 1320°C and dense ceramics (>96% of the theoretical X-ray density) with uniform microstructures (5–12 um) can be obtained by sintering in air at 1430°C. The ceramic exhibits a moderate dielectric constant ɛ_r∼36, a high quality factor Q × f ∼45 327 GHz, and a low temperature coefficient of resonant frequency τ _f of −9 ppm/°C.     

Characteristics of High-Q Microwave Dielectric Ceramics Nd(Co1/2Ti1/2)O3 With CuO Addition

We report the microwave dielectric properties and the microstructures of Nd(Co_1/2Ti_1/2)O₃ ceramics prepared by the conventional solid-state route. The prepared Nd(Co_1/2Ti_1/2)O₃ exhibits a mixture of Co and Ti showing a 1:1 order in the B site. Lowering the sintering temperature (as low as 1260°C) and promoting the densification of Nd(Co_1/2Ti_1/2)O₃ ceramics could be effectively achieved by adding CuO (up to 0.75 wt%). At 1350°C, Nd(Co_1/2Ti_1/2)O₃ ceramics with 0.5 wt% CuO addition possess a dielectric constant (ɛ_r) of 27.6, a Q × f value of 165 000 GHz (at 9 GHz), and a temperature coefficient of resonant frequency (τ_f) of −20 ppm/°C. By comparing with pure Nd(Co_1/2Ti_1/2)O₃ ceramics, incorporating additional CuO helps to render a dielectric material with a higher dielectric constant, a smaller τ_f value, and a 20% dielectric loss reduction, which makes it a very promising candidate for applications requiring low microwave dielectric loss.     

Microwave Dielectric Properties of CaTiO3-Ca(Al1/2Ta1/2)O3 Ceramics

The microwave dielectric properties of CaTi_1-χ(Al_1/2Ta_1/2)_cHO₃ solid solutions (0.3 ≤χ≤ 0.5) have been investigated. The ceramic samples had perovskite structures similar to CaTiO₃. The partial substitution of Ti₄₊ by a coupled Al₃₊/Ta_s+ permitted improvement of the quality factor Q . The dielectric constant (τ_r) and temperature coefficient of resonant frequency (τ_r) decrease rapidly with an increase of χ. A new high-quality microwave dielectric material was found at χ= 0.46 with σ_r= 46.5, Q f = 27300 GHz, and π_f= 0 ppm/°C. The relationship between microstructures and dielectric properties is presented.     

A New Low-Loss Microwave Dielectric Ceramic Sr4LaTiNb3O15

A high dielectric constant and low-loss ceramic with composition Sr₄LaTiNb₃O₁₅ has been prepared by the conventional solid-state ceramic route. This compound adopts an A₅B₄O₁₅ cation-deficient hexagonal perovskite structure and crystallizes in the trigonal system with unit cell parameters a =5.6307(2), c =11.3692(3) Å, V =312.16(2) ų, and Z =1. The dielectric properties of dense ceramics sintered in air at 1460°C have been characterized at microwave frequencies. The results show that the material affords a relatively high dielectric constant ɛ_r∼43, a high quality factor Q × f ∼44 718 GHz, and a low temperature coefficient of resonant frequency TC_f∼13 ppm/°C.     

Unique Dielectric Behavior of 0.6Pb(Ni1/2W1/2)O3·0.4PbTiO3 Derived from Mechanical Activation

0.6Pb(Ni_1/2W_1/2)O₃·0.4PbTiO₃(0.6PNW·0.4PT) of complex perovskite structure is successfully synthesized by mechanical activation of mixed oxide composition, followed by sintering at 950°C. It exhibits a considerably stable temperature dependence of dielectric constant over the wide temperature range of −120° to 20°C, although there occurs a dielectric peak at around 74°C. Raman spectroscopic studies show the coexistence of tetragonal and pseudocubic perovskite phases on sintering at 950°C, which are attributed to the inhomogeneous distribution of PbTiO₃ arising from mechanical activation. The dielectric behavior can be fine tuned by thermal annealing at 750°C, leading to phase redistribution in PNW-PT.     

Glass-Free Zn2Te3O8 Microwave Ceramic for LTCC Applications

A Zn₂Te₃O₈ ceramic was investigated as a promising dielectric material for low-temperature co-fired ceramics (LTCC) applications. The Zn₂Te₃O₈ ceramic was synthesized using the solid-state reaction method by sintering in the temperature range 540°–600°C. The structure and microstructure of the compounds were investigated using X-ray diffraction (XRD) and scanning electron microscopy methods. The dielectric properties of the ceramics were studied in the frequency range 4–6 GHz. The Zn₂Te₃O₈ ceramic has a dielectric constant (ɛ_r) of 16.2, a quality factor ( Q _u× f ) of 66 000 at 4.97 GHz, and a temperature coefficient of resonant frequency (τ_f) of −60 ppm/°C, respectively. Addition of 4 wt% TiO₂ improved the τ_f to −8.7 ppm/°C with an ɛ_r of 19.3 and a Q _u× f of 27 000 at 5.14 GHz when sintered at 650°C. The chemical reactivity of the Zn₂Te₃O₈ ceramic with Ag and Al metal electrodes was also investigated.     

Dielectric Properties of (1−x)CaTiO3–xCa(Zn1/3Nb2/3)O3 Ceramic System at Microwave Frequency

The microwave dielectric properties of the (1− x )CaTiO₃– x Ca(Zn_1/3Nb_2/3)O₃ ceramic system have been investigated. The ceramic samples sintered at 1300°–1450°C for 4 h in air exhibit orthorhombic pervoskite and form a complete solid solution for different x value. When the x value increased from 0.2 to 0.8, the permittivity ɛ_r decreased from 115 to 42, the unloaded quality factor Q × f increased from 5030 to 13 030 GHz, and the temperature coefficient τ_f decreased from 336 to −28 ppm/°C. When x =0.7, the best combination of dielectric properties, a near zero temperature coefficient of resonant frequency of τ_f∼−6 ppm/°C, Q × f ∼10 860 GHz and ɛ_r∼51 is obtained.     

Single-Calcination Synthesis of Pyrochlore-Free 0.9Pb(Mg1/3Nb2/3)O3–0.1PbTiO3 and Pb(Mg1/3Nb2/3)O3 Ceramics Using a Coating Method

A coating approach for synthesizing 0.9Pb(Mg_1/3Nb_2/3)O₃–0.1PbTiO₃ (0.9PMN–0.1PT) and PMN using a single calcination step was demonstrated. The pyrochlore phase was prevented by coating Mg(OH)₂ on Nb₂O₅ particles. Coating of Mg(OH)₂ on Nb₂O₅ was done by precipitating Mg(OH)₂ in an aqueous Nb₂O₅ suspension at pH 10. The coating was confirmed using optical micrographs and zeta-potential measurements. A single calcination treatment of the Mg(OH)₂-coated Nb₂O₅ particles mixed with appropriate amounts of PbO and PbTiO₃ powders at 900°C for 2 h produced pyrochlore-free perovskite 0.9PMN–0.1PT and PMN powders. The elimination of the pyrochlore phase was attributed to the separation of PbO and Nb₂O₅ by the Mg(OH)₂ coating. The Mg(OH)₂ coating on the Nb₂O₅ improved the mixing of Mg(OH)₂ and Nb₂O₅ and decreased the temperature for complete columbite conversion to ∼850°C. The pyrochlore-free perovskite 0.9PMN–0.1PT powders were sintered to 97% density at 1150°C. The sintered 0.9PMN–0.1PT ceramics exhibited a dielectric constant maximum of ∼24 660 at 45°C at a frequency of 1 kHz.     

High Q Microwave Dielectric Ceramics in (Ni1−x Znx)Nb2O6 System

(Ni_{1− x} Zn _x )Nb₂O₆, 0≤ x ≤1.0, ceramics with >97% density were prepared by a conventional solid-state reaction, followed by sintering at 1200°–1300°C (depending on the value of x ). The XRD patterns of the sintered samples (0≤ x ≤1.0) revealed single-phase formation with a columbite ( Pbcn ) structure. The unit cell volume slightly increased with increasing Zn content ( x ). All the compositions showed high electrical resistivity (ρ_dc=1.6±0.3 × 10¹¹Ω·cm). The microwave (4–5 GHz) dielectric properties of (Ni_{1− x} Zn _x )Nb₂O₆ ceramics exhibited a significant dependence on the Zn content and to some extent on the morphology of the grains. As x was increased from 0 to 1, the average grain size monotonically increased from 7.6 to 21.2 μm and the microwave dielectric constant (ɛ'_r) increased from 23.6 to 26.1, while the quality factors ( Q _u× f ) increased from 18 900 to 103 730 GHz and the temperature coefficient of resonant frequency (τ_f) increased from −62 to −73 ppm/°C. In the present work, we report the highest observed values of Q _u× f =103 730 GHz, and ɛ'_r=26.1 for the ZnNb₂O₆-sintered ceramics.