氯霉素免疫抗原及包被抗原的制备

采用混合酸酐法合成30:1～10:1 三个不同起始物质的量比的氯霉素免疫抗原(HAP-KLH),采用活泼酯法(EDC-NHS)合成40:1～1:1 七个不同起始物质的量比的包被抗原(HAP-OVA),紫外测定HAP-KLH 偶联比25:1～8:1,HAP-OVA 偶联比23:1～1:3。间接竞争ELISA 实验优化包被抗原,在23:1～3:1 偶联比范围内,氯霉素(CAP) IC50值为36～15ng/mL,随着偶联比的减小而降低,当偶联比低于3:1 则略为上升。确定了包被抗原HAP-OVA 最佳偶联比为3:1。本研究表明包被抗原的偶联比对ELISA 测定IC50 值有重要影响,应合成不同偶联比的包被抗原,选出最佳偶联比。     

抗莱克多巴胺单克隆抗体杂交瘤细胞株的建立及其免疫学特性鉴定

莱克多巴胺(RAC)经化学修饰引入功能基团羧基,合成半抗原RAC- 戊二酸酐半醛化合物(RAC-SA),用混合酸酐法(MA)将RAC-SA 偶联于牛血清白蛋白(BSA),合成人工抗原BSA-RAC,用红外(IR)、紫外(UV)和凝胶电泳(SDS-PAGE)对其进行鉴定;用BSA-RAC免疫Balb/C 小鼠,细胞融合技术建立抗RAC的单克隆抗体(RAC mAb)杂交瘤细胞株,体内诱生腹水法制备RAC mAb,并鉴定其免疫学特性。结果表明,BSA-RAC 偶联成功,偶联率为24.5:1;筛选出3F10、3H12、4D8 共3 株杂交瘤细胞,其中最好的4D8 株间接ELISA 效价细胞培养上清为1:1.28 × 103,腹水为1:6.4 × 105,同种型为IgG1/κ,亲和常数(Ka)为1.65 × 1010L/mol,对RAC 的半数抑制浓度(IC50)为5.7ng/ml,与多巴酚丁胺的交叉反应率(CR)为22.3%,与其他化合物无CR。     

有机磷农药三唑磷单克隆抗体制备及鉴定

采用活泼酯法和混合酸酐法将三唑磷半抗原(TZPM-Hap)与牛血清蛋白(BSA)和卵血清蛋白(OVA)偶联,分别制备出一种免疫抗原(TZPM-A-BSA)和两种包被抗原(TZPM-A-OVA和TZPM-M-OVA)。通过免疫小鼠及细胞融合,并对杂交瘤细胞进行经多次筛选和亚克隆得到1株产三唑磷单克隆抗体阳性细胞株(FC3),其抗体亚类为IgM。辛酸-硫酸铵沉淀法纯化后的抗体经间接ELISA检测,该方法IC50=9.7μg/L,最低检测限(LOD)为1.0μg/L,定量检测线性范围(IC20～IC80)为2.5～100.0μg/L,与其他有机磷农药结构类似物无明显交叉反应,显示出高度的特异性。该抗体可进一步用于免疫分析试剂盒开发。     

杀菌剂抑霉唑人工抗原的合成和鉴定

以咪唑乙醇为原料,与6- 溴己酸乙酯发生取代反应后再经水解反应合成抑霉唑半抗原(6-[1-(2,4- 二氯苯基)-2-(1- 咪唑基)乙氧基]己酸)。产物经薄层层析和1H-NMR 鉴定后,采用活化酯法分别与牛血清蛋白(BSA)和卵清白蛋白(OVA)偶联得到免疫原(HIA-BSA)和包被原(HIA-OVA),紫外光谱分析法计算得其偶联比分别为13:1 和7:1,初步说明人工抗原合成成功。通过免疫动物获得效价为1:64000 的抗体,采用间接竞争ELISA 法测定抗体的IC50 值为1.76μg/mL,从而进一步证明人工抗原合成成功,所得的抗体可用于ELISA 检测试剂盒的研制。     

盐酸西布曲明人工抗原的合成与鉴定

目的：建立盐酸西布曲明的免疫分析方法。方法：4-氯苯乙腈和1, 3-二溴丙烷为原料合成与盐酸西布曲明具有相同母核结构的小分子双去甲基西布曲明(M2),以双去甲基西布曲明为半抗原,并分别通过活泼酯法、戊二醛法和混合酸酐法将半抗原与牛血清白蛋白(BSA)和卵清蛋白(OVA)偶联制备免疫原(M2-BSA)和包被抗原(M2-OVA)。结果：紫外光谱扫描证明半抗原M2与载体蛋白偶联比为24.6:1(M2-BSA)和16.2:1(M2-OVA),抗血清ELISA效价均达到1:8000以上,IC50=0.42μg/mL。结论：半抗原M2与载体蛋白均已成功偶联,其中活泼酯法对半抗原活性基团的影响最小,合成人工抗原的特异性最强。     

对氯甲基苯甲酸链接的莱克多巴胺人工抗原的合成与鉴定

采用对氯甲基苯甲酸(CBA)为链接臂,用混合酸酐法将莱克多巴胺(RAC)与牛血清白蛋白(BSA)偶联制备人工抗原(RAC-CBA-BSA),通过紫外、红外、电泳鉴定抗原合成成功;再以卵清蛋白(OVA)为载体蛋白合成包被抗原(RAC-CBA-OVA),测定其与抗体的亲和力和抑制率。间接竞争ELISA结果以对CBA为链接臂合成的包被抗原对应的抗体滴度为7047.3、IC50为17.05ng/mL,结果表明,CBA可以用于RAC人工抗原的合成,使用RAC-CBA-OVA作为包被抗原可以提高ELISA检测灵敏度。     

三聚氰胺单克隆抗体的制备及鉴定

为建立三聚氰胺免疫分析方法,采用戊二醛法合成免疫抗原MEL-BSA和包被抗原MEL-OVA,全抗原经紫外吸收法检测证实偶联成功且偶联比约为16∶1。用MEL-BSA免疫BALB/c小鼠,用常规单克隆制备技术筛选获得1株稳定分泌抗三聚氰胺单克隆抗体的细胞株6E3。腹水经纯化后,研究了抗体效价、竞争抑制能力及与结构类似物的交叉反应率,其中抗体效价为1∶64 000,检测线性范围为0.1~3.2 mg/L,IC50为1.01 mg/L,与三聚氰酸、三聚氰酸一酰胺及三聚氰酸二酰胺的交叉反应率均小于0.1%,该方法有望用于三聚氰胺免疫检测试剂的研制开发。     

莱克多巴胺和土霉素人工抗原的合成及鉴定

研究莱克多巴胺和土霉素免疫抗原的制备。实验中用碳二亚胺法将莱克多巴胺(ractopamine,RAC)与载体蛋白牛血清白蛋白(bovine serum albumin,BSA)偶联,制备完全抗原;采用混合酸酐法将土霉素(oxytetracycline,OTC)与载体蛋白BSA偶联,制备完全抗原,并对合成产物进行表征。紫外扫描对合成产物RAC-BSA、OTC-BSA进行鉴定结果显示偶联成功,经重氮化后利用混合酸酐法制备完全抗原的偶联比为5:1;经衍生后利用碳二亚胺法制备RAC完全抗原偶联比为7:1。利用制备的免疫原免疫兔子可以获得相应的抗体。     

呋喃唑酮人工抗原的制备与鉴定

为了制备3-氨基-2-恶唑烷酮(AOZ)的完全抗原,作者以乙醇肼和碳酸二甲酯为原料,首先合成了3-氨基-2-恶唑烷酮(AOZ),然后通过对醛基苯甲酸对AOZ进行衍生制得3-(4-羧基苯亚甲基)-氨基-2-恶唑烷酮(CPAOZ),以CPAOZ作为半抗原,经水溶性碳化二亚胺法(EDC),缩合酯化法(DCC)和混合酸酐法(MA)法3种方法分别与载体蛋白偶联,合成人工抗原。对于制备产物通过紫外光谱扫描分析进行了鉴定,3种抗原的偶联比率分别为8、12、17。采用3种抗原做为包被原,建立了酶联免疫(ELISA)抑制曲线。结果表明,对AOZ的半数抑制率(IC50)分别为12.9、7.6、1.1 ng/mL。采用混合酸酐法(MA法)制备的包被抗原与抗体具有较好的匹配性。3-氨基-2-恶唑烷酮(AOZ),是硝基呋喃类抗生素呋喃唑酮在动物体内的稳定代谢物,采用本试验制备的抗原,有望获得特异性更好的抗体。     

链格孢霉毒素细交链格孢菌酮酸人工抗原的合成及其多克隆抗体制备

本研究采用肟化法用羧甲基羟胺半盐酸盐对链格孢霉毒素细交链格孢菌酮酸(Tenuaconic acid,TA)进行衍生后引入连接臂,得到了半抗原TAO。通过活性酯法将半抗原TAO分别与牛血清蛋白(Bovine serum albumin,BSA)偶联制备得到免疫原TAO-BSA、与血蓝蛋白(Keyhole Limpet Hemocyanin,KLH)偶联制备得到包被原TAO-KLH。经透析纯化后分别采用紫外光谱、红外光谱扫描法对合成的人工抗原进行初步鉴定,制备得到的人工抗原的偶联比分别为18.3:1、38.7:1。此人工抗原免疫Balb/c小鼠后获得的鼠源抗血清进一步验证了人工抗原合成成功,制备得到特异性识别TA的多克隆抗体。通过ELISA棋盘法确定了最佳包被原浓度以及最佳抗体稀释度并建立了TA间接竞争ELISA检测方法,其灵敏度以半抑制浓度IC50表示为335.55 ng/m L,最低检出限(LOD)为19.00 ng/m L,定量线性检测范围为200.00~1563.00 ng/m L。     

Reliable identification of grapevine rootstock varieties using RAPD PCR on woody samples

Since grapevine ( Vitis spp .) rootstock material is being traded increasingly as disbudded woody material a lack of distinctive morphological features on such material necessitates an alternative and reliable means of identification. Methods described here were developed for rapid and efficient extraction of DNA from woody samples rich in phenolic compounds and polysaccharides, and for subsequent identification of varieties by RAPD PCR. Using these methods, and with the application of only one selected RAPD primer, we were able to differentiate sixteen rootstock varieties, including the seven varieties most commonly used in Germany. Problems commonly encountered with reproducibility of RAPD patterns were avoided by choosing primers with a dinucleotide sequence and a high G/C content that allowed a rather high annealing temperature of 45°C. Methods described here should also be useful for other horticultural crops, especially those with woody tissues rich in phenolic compounds and polysaccharides.     

An internet compendium of analytical methods and spectroscopic information for monomers and additives used in food packaging plastics

An internet website (http://cpf.jrc.it/smt/) has been produced as a means of dissemination of methods of analysis and supporting spectroscopic information on monomers and additives used for food contact materials (principally packaging). The site which is aimed primarily at assisting food control laboratories in the European Union contains analytical information on monomers, starting substances and additives used in the manufacture of plastics materials. A searchable index is provided giving PM and CAS numbers for each of 255 substances. For each substance a data sheet gives regulatory information, chemical structures, physico-chemical information and background information on the use of the substance in particular plastics, and the food packaging applications. For monomers and starting substances (155 compounds) the infra-red and mass spectra are provided, and for additives (100 compounds); additionally proton NMR are available for about 50% of the entries. Where analytical methods have been developed for determining these substances as residual amounts in plastics or as trace amounts in food simulants these methods are also on the website. All information is provided in portable document file (PDF) format which means that high quality copies can be readily printed, using freely available Adobe Acrobat Reader software. The website will in future be maintained and up-dated by the European Commission's Joint Research Centre (JRC) as new substances are authorized for use by the European Commission (DG-ENTR formerly DGIII). Where analytical laboratories (food control or other) require reference substances these can be obtained free-ofcharge from a reference collection housed at the JRC and maintained in conjunction with this website compendium.     

Aroma characterization of various apricot varieties using headspace–solid phase microextraction combined with gas chromatography–mass spectrometry and gas chromatography–olfactometry

The characterization of the aromatic profile of several apricot cultivars with molecular tracers in order to obtain objective data concerning the aromatic quality of this fruit was undertaken using headspace–solid phase microextraction (HS–SPME). Six apricot cultivars were selected according to their organoleptic characteristics: Iranien, Orangered, Goldrich, Hargrand, Rouge du Roussillon and A4025. The aromatic intensity of these varieties measured by HS–SPME–Olfactometry were defined and classified according to the presence and the intensity of grassy, fruity and apricot like notes. In the six varieties, 23 common volatile compounds were identified by HS–SPME–GC–MS. Finally, 10 compounds, ethyl acetate, hexyl acetate, limonene, β-cyclocitral, γ-decalactone, 6-methyl-5-hepten-2-one, linalool, β-ionone, menthone and (E)-hexen-2-al were recognized by HS–SPME–GC–O as responsible of the aromatic notes involved in apricot aroma and considered as molecular tracers of apricot aromatic quality which could be utilized to discriminate apricot varieties.     

Tests of potential functional barriers for laminated multilayer food packages. Part I: Low molecular weight permeants

The advent of the functional barrier concept in food packaging has brought with it a requirement for fast tests of permeation through potential barrier materials. In such tests it would be convenient for both foodstuffs and materials below the functional barrier (sub-barrier materials) to be represented by standard simulants. By means of inverse gas chromatography, liquid paraffin spiked with appropriate permeants was considered as a potential simulant of sub-barrier materials based on polypropylene (PP) or similar polyolefins. Experiments were performed to characterize the kinetics of the permeation of low molecular weight model permeants (octene, toluene and isopropanol) from liquid paraffin, through a surrogate potential functional barrier (25 μm-thick oriented PP) into the food simulants olive oil and 3% (w/v) acetic acid. These permeation results were interpreted in terms of three permeation kinetic models regarding the solubility of a particular model permeant in the post-barrier medium (i.e. the food simulant). The results obtained justify the development and evaluation of liquid sub-barrier simulants that would allow flexible yet rigorous testing of new laminated multilayer packaging materials.     

Analysis of benzo[a]pyrene in spiked fatty foods by second derivative synchronous spectrofluorimetry after microwave-assisted treatment of samples

A simple, rapid and inexpensive method has been developed for the determination of benzo[a     

The development of reference materials for paralytic shellfish poisoning toxins in lyophilized mussel. II: Certification study

This paper describes the second part of a project undertaken to develop certified mussel reference materials for paralytic shellfish poisoning toxins. In the first part two interlaboratory studies were undertaken to investigate the performance of the analytical methodology for several PSP toxins, in particular saxitoxin and decarbamoyl-saxitoxin in lyophilized mussels, and to set criteria for the acceptance of results to be applied during the certification exercise. Fifteen laboratories participated in this certification study and were asked to measure saxitoxin and decarbamoyl-saxitoxin in rehydrated lyophilized mussel material and in a saxitoxin-enriched mussel material. The participants were allowed to use a method of their choice but with an extraction procedure to be strictly followed. The study included extra experiments to verify the detection limits for both saxitoxin and decarbamoyl-saxitoxin. Most participants (13 of 15) were able to meet all the criteria set for the certification study. Results for saxitoxin.2HCl yielded a certified mass fraction of <0.07 mg/kg in the rehydrated lyophilized mussels. Results obtained for decarbamoyl-saxitoxin.2HCl yielded a certified mass fraction of 1.59+/-0.20 mg/kg. The results for saxitoxin.2HCl in enriched blank mussel yielded a certified mass fraction of 0.48 +/- 0.06 mg/kg. These certified reference materials for paralytic shellfish poisoning toxins in lyophilized mussel material are the first available for laboratories to test their method for accuracy and performance.     

Announcing a new international peer-reviewed journal:Food Science and Human Wellness now accepting manuscript submission in English

<正>We are pleased to announce the launch of a new international peer-reviewed journal-Food Science and Human Wellness,ISSN 2213-4530,which is an open access journal,produced and hosted by Elsevier B.V.on behalf of Beijing Academy of Food Sciences.Food Science and Human Wellness is an international peer-reviewed English journal that provides a forum for the dissemination of the     

Chinese CTP Market

According to Printing and Printing Equipment Industries Association of China（PEIAC）＇s statistics to the plate manufucturer in China, in 2013, the actual offset plate production has reached 346 million square meters in China. Among them, the CTP production volume was 245 million square meters, up by 11% than that of last year; the total sales of the CTP plate was 239 million square meters, up by 13%.     

Preparatory Work of Print China 2015 is Going Smoothly

正Held at Guangdong Modern International Exhibition Center,Print China 2015 will cover 7exhibition halls,besides the original Hall No.3,4,5,6,7,the newly built F zone of Hall 3 will be used too.The total area will be140,000 square meters.Hall 3:Offset and large printing equipment,package printing equipment,post press