Synthesis and properties of polynorbornenes bearing oligomeric siloxane pendant groups

The ring-opening metathesis polymerization (ROMP) of norbornene derivatives 1-5 bearing oligomeric siloxane pendant groups was carried out with Grubbs 1st and 2nd generation, and Grubbs-Hoveyda ruthenium (Ru) catalysts. Monomer 1 gave high-molecular-weight polymers (M_n ca. 27?000-180?000) in high yields (80-100%). Monomers 2-5 also polymerized with Ru carbene catalysts to give high-molecular-weight polymers (M_n ca. 34?000-240?000) in high yields (66-100%). The onset temperatures of weight loss (T₀) of the polymers were 180-250 °C. The glass transition temperatures (T_gs) of poly(1) and poly(2) bearing branched siloxane linkages were near or higher than room temperature (27 and 101 °C). Meanwhile, the T_gs of poly(3)-poly(5) bearing linear siloxane linkages were much lower (−115 to −23 °C), and decreased with increasing length of the siloxane linkages. Poly(1) and poly(2) were hydrogenated completely, which was confirmed by ¹H NMR spectroscopy. The free-standing membranes of poly(1) and poly(2) showed high gas permeability; especially poly(2) is the most permeable to various gases among ROMP-polynorbornene derivatives reported so far.     

Synthesis and electro-optical properties of helical polyacetylenes carrying carbazole and triphenylamine moieties

Novel chiral acetylene monomers bearing carbazole and triphenylamine groups, namely, (S)-3-butyn-2-yl 2-(9-carbazolyl)ethyl carbonate (1) and (S)-3-butyn-2-yl 4-(diphenylamino)benzoate (2) were synthesized, and polymerized with Rh⁺(nbd)[η⁶-C₆H₅B⁻(C₆H₅)₃] catalyst to give the corresponding polymers with moderate molecular weights (M_n 13.0 × 10³ and 15.5 × 10³) in good yields (86% and 88%). CD spectroscopic studies revealed that poly(1) and poly(2) took predominantly one-handed helical structure in CHCl₃. The helical structures of poly(1) and poly(2) were very stable against heating and addition of MeOH. The solution of poly(1) and poly(2) emitted fluorescence in 0.52% and 7.2% quantum yields, which were lower than those of the corresponding monomers 1 and 2 (22.5% and 76.5%). The cyclic voltammograms of the polymers indicated that the oxidation potentials of the polymers were lower than those of the monomers. The polymers showed electrochromism and changed the color from pale yellow to pale blue by application of voltage, presumably caused by the formation of polaron at the carbazole and triphenylamine moieties. The onset temperatures of weight loss of poly(1) and poly(2) were 225 and 270 °C under air.     

Helical conformation of the copolymers of l-proline derivatives based propargylether and chiral N-propargylamide

The novel acetylene monomers, l-proline derivatives based propargylethers PR (PA, PC, and PL) were synthesized by alkylation of Boc-hydroxyproline with propargyl bromide and acylation of achiral amine. The homopolymers of the novel acetylene monomer exist in no regulated higher order structure in solvents because of the lack of hydrogen bond and the unique ring structure in the pendant. Consequently, the copolymerization of l-proline-derived chiral propargylether PR with the l-alanine-derived N-propargylamide (LA) was formed and the chiroptical properties of the formed copolymers were examined. We conclude that (1) N-H of the amide group at 2-position in proline play an important role in the formation of helical conformation of poly(LA₈₈-co-PR₁₂); (2) improving the amount of PC of poly(LA-co-PC) changes the conformation of the copolymer in CHCl₃ and perturbs the leadership of LA; (3) the conformation of poly(LA₇₅-co-PC₂₅) remarkably changes with changing temperature and PC obtains the leadership in the competition on the conformation of poly(LA₇₅-co-PC₂₅) in CHCl₃ with the improvement of temperature.     

‘Living’ radical polymerization of styrene mediated by spiro ring-substituted piperidinyl-N-oxyl radicals. The effect of the spiro rings on the control of polymerization

The bulk radical polymerizations of styrene (St) at 80-120 °C in the presence of 6-aza-7,7-dimethyl-9-hydroxyspiro[4.5]decane-6-yloxyl (1) and 1-aza-2,2-dimethyl-4-hydroxy[5.5]undecane-1-yloxyl (2) were studied. At 100 and 120 °C, the polymerizations were well controlled by those nitroxides to give poly(St)s with narrow polydispersities. On the other hand, the polymerization mediated by 2 at 80 °C showed a good ‘livingness’ of polymerization, but 1 had a poor ability to control the polymerization to give poly(St) with a broad polydispersity of 1.52. The rate constants (k_act) for the homolysis of the NO-C bond of the alkoxyamines prepared from 1 and 2 were measured at 333-373 K, and the A_acts and E_acts values were determined to be 2.8×10¹³ s⁻¹ and 128 kJ mol⁻¹ (1) and 4.0×10¹³ s⁻¹ and 125 kJ mol⁻¹ (2), respectively, from the Arrhenius plots. These results are compared with those for the structurally related piperidinyl-N-yloxyl radicals including TEMPO.     

Paired electrochemical synthesis of new organosulfone derivatives

Electrochemical oxidation of “cathodically generated 4-aminocatechol (2)” has been studied in the presence of 4-toluenesulfinic acid (4a) and benzenesulfinic acid (4b) as nucleophiles in aqueous solutions, using cyclic voltammetry and controlled-potential coulometry. The results indicate that the o-benzoquinone derived from 4-aminocatechol (2) participates in Michael addition reaction with 4a or 4b to form the corresponding new organosulfone derivatives (5a and 5b). In this work we have proposed a mechanism for the electrode process. A Fe(CN)₆³⁻/Fe(CN)₆⁴⁻ redox mediator was used for the anodic oxidation of 4-aminocatechol (2) to the corresponding o-quinone 3. The indirect electrochemical process consists of a multi-step such as (a) cathodic reduction of 4-nitrocatechol (1) to 4-aminocatechol (2), (b) chemical oxidation of 4-aminocatechol (2) to 4-aminoquinone (3) with the resulting Fe(CN)₆³⁻, (c) the chemical reaction of 4-aminoquinone (3) with 4-toluenesulfinic acid (4a) or benzenesulfinic acid (4b), and (d) the anodic regeneration of Fe(CN)₆³⁻. The paired electrochemical synthesis of organosulfone derivatives (5a and 5b) has been successfully performed in an one-pot process at carbon rod electrode as a working and platinum as a counter electrode in an undivided cell.     

Synthesis and properties of helical polyacetylenes containing carbazole

Novel acetylene monomers containing carbazole with chiral menthyl and bornyl groups, 9-(1R,2S,5R)-menthyloxycarbonyl-2-ethynylcarbazole (1), 9-(1S,2R,5S)-menthyloxycarbonyl-2-ethynylcarbazole (2), 9-(1R,2S,5R)-menthyloxycarbonyl-3-ethynylcarbazole (3) and 9-(1S)-bornyloxycarbonyl-2-ethynylcarbazole (4) were synthesized and polymerized with a Rh catalyst to give the corresponding polymers [poly(1)-poly(4)] with moderate M_n value of (11.5-92.2) × 10³ in good yields (77-89%). CD spectroscopic studies revealed that poly(1), poly(2) and poly(4) took predominantly one-handed helical structure in CHCl₃, THF, toluene, and CH₂Cl₂, while poly(3) did not. Addition of methanol to CHCl₃ solutions of poly(1) and poly(2) resulted in the formation of aggregates showing smaller CD signals at 275 and 320 nm. The helical structure of poly(1) and poly(2) was very stable against heating. The polymers emitted fluorescence in 0.40-2.90% quantum yields. Poly(4) exhibited an obvious oxidation peak at 1.10 V. The polymers were thermally stable below 300 °C.     

Tyrosine-based poly(m-phenyleneethynylene-p-phenyleneethynylene)s. Helix folding and responsiveness to a base

The Sonogashira-Hagihara polymerization of 3′,5′-diiodo-N-α-tert-butoxycarbonyl-l-tyrosine methyl ester (1) and 3′,5′-diiodo-N-α-tert-butoxycarbonyl-O-methyl-l-tyrosine methyl ester (2) with para-diethynylbenzene (3) was carried out to obtain optically active poly(m-phenyleneethynylene-p-phenyleneethynylene)s [poly(1) and poly(2)] with M_n’s ranging from 9900 to 15,000 in 80-87% yields. Poly(1) exhibited intense CD signals in DMSO and THF, but did not in CH₂Cl₂, indicating that it took a predominantly one-handed helical conformation in the former two solvents. On the other hand, there was no evidence for poly(2) to take a helical structure in these solvents. Poly(1) turned the CD sign at 390 nm from plus to minus in DMSO/H₂O = 9/1 (v/v) by the addition of NaOH. Alkaline hydrolysis of ester moieties of poly(1) and poly(2) gave the corresponding polymers having carboxy groups [poly(1a) and poly(2a)]. Poly(1a) and poly(2a) increased the CD intensity by the addition of NaOH.     

Copolymerization of ethylene and 2-vinylnaphtalene with titanium and zirconium catalysts

Copolymerization of ethylene and 2-vinylnaphtalene (VN) has been investigated with dimethylsilylene(tetramethylcyclopentadienyl)(N-tert-butyl)titanium dichloride (1) and rac-isopropylidenebis(indenyl)zirconium dichloride (2) using methylaluminoxane as a cocatalyst. The copolymerization gave the corresponding copolymer in good yield. The catalyst 1 showed higher incorporation of VN than the catalyst 2. Thermal properties of the resulting copolymers were investigated by DSC in comparison with those of poly(ethylene-co-styrene), and poly(ethylene-co-VN) showed higher T_g than poly(ethylene-co-styrene).     

Homo- and R/S-copolymerizations of chiral methylpropargyl esters carrying pyrene moieties, and optical properties of the formed polymers

Pyrene-functionalized chiral methylpropargyl esters, (R)-3-butyn-2-yl-1-pyrenebutyrate [(R)-1], (S)-3-butyn-2-yl-1-pyrenebutyrate [(S)-1], (R)-3-butyn-2-yl-1-pyrenecarboxylate [(R)-2], and 3-butyn-2-yl-1-pyrenecarboxylate [(R,S)-2] were polymerized with (nbd)Rh⁺[η⁶-C₆H₅B⁻(C₆H₅)₃] to obtain the corresponding polymers with moderate molecular weights (M_n: 10?500-66?500) in good yields (82-97%). All the polymers were soluble in CHCl₃, CH₂Cl₂, and THF. The polarimetric and CD spectroscopic data indicated that poly[(R)-1], poly[(S)-1], and poly[(R)-2] existed in a helical structure with predominantly one-handed screw sense in these solvents. The helical structure of poly[(R)-1] and poly[(S)-1] was stable upon heating and addition of MeOH, while that of poly[(R)-2] changed upon MeOH addition. The copolymerization of (R)-1 with (S)-1 was also conducted to obtain the copolymers satisfactorily. Poly[(R)-1], poly[(S)-1], and poly[(R)-2] emitted fluorescence smaller than the corresponding racemic copolymers. The fluorescence intensity was tuned by the addition of MeOH to THF solutions of the polymers.     

Synthesis and properties of optically active substituted polyacetylenes having carboxyl and/or amino groups

Polyacetylenes having carboxyl and/or amino groups in the side chain were synthesized by the polymerization of N-(2-propynyloxycarbonyl)-l-alanine (1) and l-alanine N-propargylamide (2) catalyzed with a rhodium cation complex. Poly(1_0.5-co-2_0.5) exhibited a larger CD signal than the homopolymers. The polymer mixtures obtained by the polymerization of 1 in the presence of poly(2), and those obtained by the polymerization of 2 in the presence of poly(1) showed specific rotations larger than calculated. The polymerization of propargylamine in the presence of poly(1) did not exhibit significant effect, while the polymer mixtures obtained by the polymerization of propiolic acid in the presence of poly(2) exhibited [α]_D of positive sign, although poly(2) alone exhibited [α]_D of negative sign.     

Synthesis and properties of various poly(diphenylacetylenes) containing tert-amine moieties

The polymerization of diphenylacetylene derivatives possessing tert-amine moieties, such as triphenylamine, N-substituted carbazole and indole, was examined in the presence of TaCl₅-n-Bu₄Sn (1:2) catalyst. A polymer with high molecular weight (M_w = 570 × 10³) was obtained in good yield by the polymerization of diphenylamine-containing monomer 1b, whereas the isopropylphenylamine derivative (1c) gave a polymer with relatively low molecular weight (M_w = 2.4 × 10³). The polymerization of monomer 1d containing cyclohexylphenylamine group did not proceed; however, carbazolyl- and indolyl-containing monomers also produced polymers. Poly(1b), poly(2f) and poly(4b) could be fabricated into free-standing membranes by casting toluene solutions of these polymers. The gas permeability of poly(1b) was too low to be evaluated accurately whereas poly(4b) possessing two chlorine atoms in the repeating unit showed higher gas permeability than that of poly(1b); furthermore, poly(2f) having trimethylsilyl and 3-methylindolyl groups exhibited relatively high gas permeability (). In the cyclic voltammograms of diphenylamino group-containing polymers, poly(1b) and poly(2b), the intensities of oxidation and reduction peaks decreased more than those of carbazolyl-containing poly(2a). The molar absorptivity (?) of poly(1b) at ∼700 nm increased with increasing applied voltage in the UV-vis spectrum.     

Preparation and properties of polytolan membranes bearing p-hydroxyl groups

The polymerization of a novel monomer p-(t-butyldimethylsiloxy)tolan (1) with TaCl₅-n-Bu₄Sn provided a high molecular weight polymer (poly(1)), whose M_w reached 4.0×10⁶. The poly(1) membrane was prepared by the casting method, and converted into poly[(p-hydroxy)tolan] (poly(2)) with a mixture of trifluoroacetic acid/water. Whereas poly(1) dissolved in low polarity solvents such as toluene and chloroform, poly(2) was practically insoluble in any solvents, although it partly dissolved in methanol and ethanol. The onset weight loss temperatures of poly(1) and poly(2) in air were 320 and 360 °C, respectively, indicating fair thermal stability among substituted polyacetylenes. The oxygen permeability coefficients (P_O2) of poly(1) was 150 barrers, which is relatively small among polytolan derivatives, while that of poly(2) was 8.0 barrers and smaller owing to the presence of polar hydroxyl groups.     

Synthesis and properties of polyacetylenes carrying N-phenylcarbazole and triphenylamine moieties

Novel acetylene monomers containing N-phenyl-substituted carbazole (Cz) and triphenylamine (TPA) groups, namely, 3-ethynyl-9-phenylcarbazole (1) and p-(N,N-diphenylamino)phenylacetylene (2) were synthesized, and polymerized with several Rh-, W-, and Mo-based catalysts. Poly(1) and poly(2) with high number-average molecular weights (15?500-974?000) were obtained in good yields (77-97%), when [(nbd)RhCl]₂-Et₃N (nbd = norbornadiene) was used as a catalyst. The polymers exhibited UV-vis absorption peaks derived from the Cz and TPA moieties at 250-350 nm and polyacetylene backbone above 350 nm. The UV-vis absorption band edge wavelengths of the polymers were longer than those of the corresponding monomers. Poly(2) exhibited a UV-vis absorption peak at a longer wavelength than poly(1) did, which indicates that poly(2) has main chain conjugation longer than that of poly(1). The molecular weights and photoluminescence quantum yields of the polymers obtained by the polymerization using [(nbd)RhCl]₂-Et₃N were larger than those of the Rh⁺(nbd)[η⁶-C₆H₅B⁻(C₆H₅)₃]-based counterparts. The cyclic voltammograms of the polymers indicated that they had clear electrochemical properties; the onset oxidation voltage of poly(1) was higher than those of N-alkyl-substituted Cz derivatives. The polymers showed electrochromism and changed the color from pale yellow to blue by application of voltage, presumably caused by the formation of charged polaron at the Cz and TPA moieties. The temperatures for 5% weight loss of the polymers were around 350-420 °C under air, indicating the high thermal stability.     

Novel poly(diphenylacetylene)s with both alkyl and silyl groups as gas permeable membranes: Synthesis, desilylation, and gas permeability

Diphenylacetylenes having a dimethyloctylsilyl group and an alkyl group at para positions [Me₂n-C₈H₁₇SiC₆H₄CCC₆H₄R; R = H (1a), i-Pr (1b), t-Bu (1c), n-Bu (1d)] and having only an alkyl group [PhCCC₆H₄R; R = i-Pr (1B), t-Bu (1C)] were synthesized and then polymerized with TaCl₅/n-Bu₄Sn catalyst to provide the corresponding poly(diphenylacetylene)s (2a, 2b, 2c, 2d, 2B, and 2C). The formed polymers afforded tough free-standing membranes by casting from toluene solutions. Desilylation reaction of Si-containing membranes (2a-d) was carried out with trifluoroacetic acid to give the desilylated membranes (3a-d). The permeability of these membranes to O₂, N₂, and CO₂ were determined. All the Si-containing membranes exhibited almost the same gas permeability. The desilylation of Si-containing membranes of 2a-c resulted in large increase of gas permeability. No apparent increasing of gas permeability was observed in the desilylation of 2d. To clarify the effects of desilylation, CO₂ diffusivity (D(CO₂)), CO₂ solubility (S(CO₂)), and fractional free volume (FFV) of the polymer membranes were investigated. The S(CO₂) values of desilylated membranes were much larger than that of Si-containing counterparts. The D(CO₂) and FFV of membranes of 2a-c increased through desilylation. The desilylated membrane of 3d had small D(CO₂) value and almost the same FFV compared with 2d. Further, the comparison of the permeability between three types of membranes with the same chemical structure revealed that the microvoids were not generated by the desilylation of membranes of poly(diphenylacetylene)s containing alkyl groups.     

Living radical polymerization of styrene mediated by a piperidinyl-N-oxyl radical having very bulky substituents

A new cyclic nitroxide 1 and the corresponding alkoxyamines 9 and 10 were synthesized and the polymerization of styrene (St) initiated with 10 was investigated. The NO-C bond of 9 is very weak, cleaving at room temperature. On the other hand, alkoxyamine 10 is stable at room temperature and the A_act and E_act for the NO-C bond homolysis were determined to be 1.4 × 10¹⁵ s⁻¹ and 124.5 kJ mol⁻¹, respectively. When the polymerization of St was carried out at 70 °C, the resultant poly(St) showed narrow polydispersities below 1.25. In the polymerization at 90 °C, the resulting poly(St) showed narrow polydispersity until 60% conversion, but M_w/M_n was rapidly increased above 60% conversion. On the other hand, the polymerization at 120 °C gave poly(St) with broad polydispersities. The unusual polymerization behavior was discussed on the basis of the SEC and ESR results.     

Synthesis and optoelectronic properties of thermally cross-linkable hole-transporting poly(fluorene-co-triphenylamine)

This paper describes the synthesis of a new thermally cross-linkable hole-transporting poly(fluorene-co-triphenylamine) (PFTV) by Suzuki coupling reaction and its application in polymer light-emitting diodes (PLEDs). The characteristics of PFTV were analyzed by ¹H NMR, differential scanning calorimetry, optical spectroscopy, cyclic voltammetry, and atomic force microscopy. Its HOMO level lies between those of PEDOT:PSS and poly(9,9-dioctylfluorene), forming a stepwise energy ladder to facilitate hole-injection. Multilayer device with thermally cross-linked PFTV as hole-transporting layer (ITO/PEDOT:PSS/HTL/PFO/LiF/Ca/Al) was readily fabricated by successive spin-coating processes, its maximum luminance efficiency (2.27 cd/A) was significantly higher than that without PFTV layer (0.50 cd/A). In addition, the PFTV was successfully applied as host for red-emitting Ir(piq)₂acac to obtain a device with moderate performance (5300 cd/m² and 2.64 cd/A). The PFTV is a promising hole-transporting material for the fabrication of multilayer PLEDs by wet processes as well as a potential host for phosphorescent PLEDs.     

Preparation of π-conjugated polymers consisting of 2-decylbenzimidazole and thiophene units and chemical properties of the polymers

Polycondensation by Stille coupling of 2-decyl-4,7-dibromobenzimidazoles and N-methyl-2-decyl-4,7-dibromobenzimidazole with 2,5-bis(trimethylstannyl)thiophene and 5,5′-bis(trimethylstannyl)-2,2′-bithiophene gave the corresponding π-conjugated polymers, poly(2-decylbenzimidazole-4,7-diyl-thiophene-2,5-diyl) 1b, poly(2-decylbenzimidazole-4,7-diyl-bithiophene-2,5-diyl) 1c and poly(N-methyl-2-decylbenzimidazole-4,7-diyl-thiophene-2,5-diyl) 2b, in 98-99% yields. The polymers 1b and 2b were fully soluble in CF₃COOH, and partially soluble in DMF (about 60 and 40% for 1b and 2b, respectively) and NMP (about 70 and 40%, respectively). The NMP soluble part of 1b and DMF soluble part of 2b gave values of 0.36 and 0.24 dl g⁻¹ in NMP and DMF, respectively. The DMF soluble part of 1b, 1c and 2b showed absorption peaks at about 458, 465 and 388 nm, respectively, in DMF. In an alkaline medium the absorption peaks of 1b and 1c are shifted to a longer wavelength by 92-101 nm; the observed shifts in the acidic medium and alkaline medium were much larger than those observed with usual benzimidazoles with low molecular weights. Packing structures of 1b, 1c and 2b are discussed based on their XRD patterns.     

Metallocene-catalyzed synthesis of polyethylenes with side-chain triarylamines: Effects of catalyst structure and triarylamine functionality

The copolymerization of ethylene with 8-triarylamine (TAA) substituted 1-octene monomers (TAA = triphenylamine (M1), N,N-diphenyl-m-tolylamine (M2), N,N-diphenyl-1-naphthylamine (M3)) using various types of group 4 single-site catalytic systems (Cp₂ZrCl₂ (C1), rac-EBIZrCl₂ (C2), rac-SBIZrCl₂ (C3), i-PrCpFluZrCl₂ (C4), Me₂Si(η⁵-C₅Me₄)(η¹-N-^tBu)TiCl₂ (C5)) was investigated to prepare functionalized polyethylene with side-chain TAA groups. The metallocene/methylaluminoxane (MAO) catalytic systems (C1-C4) efficiently lead to the production of high-molecular-weight poly(ethylene-co-M1). While the C4/MAO catalytic system shows the highest comonomer response, the C5/MAO system exhibits the poor compatibility with the M1 comonomer. Copolymerization results of ethylene with M1-M3 using C4/MAO indicate that M1-M3 are well tolerated by both the cationic active species of C4 and MAO cocatalyst, giving rise to the copolymers with high levels of activity and molecular weight. Inspection of the aliphatic region of the ¹³C NMR spectra of the copolymers (P1-P3) having ca. 11 mol% of M1-M3, respectively, reveals the presence of isolated comonomer units with prevailing [EEMEE] monomer sequences in the polymer chain. UV-vis absorption and PL spectra exhibit an apparent low-energy band broadening for P1 and P2 indicative of intrachain aggregate formation. Whereas P2 and P3 undergo completely reversible one-electron oxidation process, P1 shows relatively poor oxidational stability.     

Electrochemical study of stable N-alkoxyarylaminyl radicals

The electrochemical study of N-tert-butoxy-2,4-diphenyl-6-tert-butylphenylaminyl (1a), N-tert-butoxy-2,4-bis(4-chlorophenyl)-6-tert-butylphenylaminyl (1b), N-[2-(methoxycarbonyl)-2-propyl]-2,4-diphenyl-6-tert-butylphenylaminyl (2), and N-tert-butoxy-2,4,6-tris(4-chlorophenyl)phenylaminyl radicals (3) was performed by cyclic voltammetry using acetonitrile as the solvent and Bu₄NPF₆ as the supporting electrolyte. On cathodic scan (100 mV/s), all the radicals gave chemically reversible cyclic voltammograms, and the were determined to be −1.405 V (1a), −1.310 V (2a), −1.282 V (2b), and −1.195 V (3) (versus Fc⁺/Fc), respectively. On anodic scan (100 mV/s), on the other hand, 1a, 1b and 2 showed chemically reversible cyclic voltammograms, but 3 exhibited a partially reversible couple even on a scan rate of 500 mV/s, indicating that the cation species of 3 was less stable. The determined for 1a, 1b, 2 and 3 were 0.220, 0.280, 0.318 and 0.294 V (versus Fc⁺/Fc), respectively. The electrochemical data were compared with those of thioaminyl radicals, the corresponding sulfur analogues of 1-3.