Atom transfer radical polymerization of styrene and methyl (meth)acrylates initiated with poly(dimethylsiloxane) macroinitiator: Synthesis and characterization of triblock copolymers

Poly(dimethylsiloxane)(PDMS)‐based triblock copolymers were successfully synthesized via atom transfer radical polymerization (ATRP) initiated with bis(bromoalkyl)‐terminated PDMS macroinitiator (Br‐PDMS‐Br). First, Br‐PDMS‐Br was prepared by reaction between the bis(hydroxyalkyl)‐terminated PDMS and 2‐bromo‐2‐methylpropionyl bromide. PSt‐b‐PDMS‐b‐PSt, PMMA‐b‐PDMS‐b‐PMMA and PMA‐b‐PDMS‐b‐PMA triblock copolymers were then synthesized via ATRP of styrene (St), methyl methacrylate (MMA) and methyl acrylate (MA), respectively, in the presence of Br‐PDMS‐Br as a macroinitiator and CuCl/PMDETA as a catalyst system at 80 ^oC. Triblock copolymers were characterized by FTIR, ¹H‐NMR and GPC techniques. GPC results showed linear dependence of the number‐average molecular weight on the conversion as well as the narrow polydispersity indicies (PDI < 1.57) for the synthesized triblock copolymers which was lower than that of Br‐PDMS‐Br macroinitiator (PDI = 1.90), indicating the living/controlled characteristic of the reaction. Also, there was a very good agreement between the number‐average molecular weight calculated from ¹HNMR spectra and that calculated theoretically. Results showed that resulting copolymers have two glass transition temperatures, indicating that triblock copolymers have microphase separated morphology. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Controllable synthesis of poly(N-vinylpyrrolidone) and its block copolymers by atom transfer radical polymerization

At room temperature atom transfer radical polymerization (ATRP) of N-vinylpyrrolidone (NVP) was carried out using 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetra-azacyclo-tetradecane (Me₆Cyclam) as ligand in 1,4-dioxane/isopropanol mixture. Methyl 2-chloropropionate (MCP) and copper(I) chloride were used as initiator and catalyst, respectively. The polymerization of NVP via ATRP could be mediated by the addition of CuCl₂. The resultant poly(N-vinylpyrrolidone) (PNVP) has high conversion of up to 65% in 3 h, a controlled molecular weight close to the theoretical values and narrow molecular weight distribution between 1.2 and 1.3. The living nature of the ATRP for NVP was confirmed by the experiments of PNVP chain extension. With PNVP-Cl as macroinitiator and N-methacryloyl-N′-(α-naphthyl)thiourea (MANTU) as a hydrophobic monomer, novel fluorescent amphiphilic copolymers poly(N-vinylpyrrolidone)-b-poly(N-methacryloyl-N′-(α-naphthyl)thiourea) (PNVP-b-PMANTU) were synthesized by ATRP. PNVP-b-PMANTU copolymers were characterized by ¹H NMR, GPC-MALLS and fluorescence measurements. The results revealed that PNVP-b-PMANTU presented a blocky architecture.     

Ultra high molar mass poly[2-(dimethylamino)ethyl methacrylate] via atom transfer radical polymerization

Well-defined high molecular weight poly[2-(dimethylamino)ethyl methacrylates] [poly(DMAEMA)s] with molar masses up to ∼1×10⁶ g/mol were successfully synthesized via atom transfer radical polymerization (ATRP). This was achieved by using p-toluenesulfonyl chloride(p-TsCl)/CuCl/1,1,4,7,10,10-hexamethyl-triethylenetetramine(HMTETA) initiator/catalyst complex in methanol/water mixture. Well-controlled/‘living’ behavior was demonstrated throughout the reaction, up to high monomer conversion. The PDI value remained low at 1.26 even for a polymer with very high molecular weight at 1.1×10⁶ g/mol. We believe this is the first successful case where controlled ATRP produces a polymer with molar mass exceeding a million!     

Solid state structure-property behavior of semicrystalline poly(ether-block-amide) PEBAX thermoplastic elastomers

The solid state structure-property behavior was investigated of a series of poly(ether-block-amide) PEBAX^® thermoplastic elastomers based on nylon 12 and poly(tetramethylene oxide) with varying hard segment content. Particular emphasis was placed on better defining the morphological features of this entire series of commercially available materials. Compression molded and solution cast samples were studied by the techniques of DMA, DSC, WAXS, SAXS, AFM, SALS and stress-strain response. The strain-induced crystallization behavior of the soft polyether (PE) segments was also investigated. All samples exhibited a microphase separated morphology over a broad temperature range. As expected, an increase in the interconnectivity of the polyamide hard phase was greatly controlled by the polyamide (PA) content. Due to the crystallization of the PA hard segment, the formation of PA lamellar crystals was noted in both melt and solution cast films. At the higher PA contents, a distinct spherulitic superstructure was also observed but this form of morphological texture was diminished as the PE soft segment content increased. Limited studies of the deformation/recovery behavior of the spherulitic superstructure provided further information concerning the interaction between the hard and soft segments.     

苯乙烯-丁二烯-苯乙烯嵌段共聚物/聚(苯乙烯- 甲基丙烯酸甲酯)热塑性互穿聚合物网络

采用原子转移自由基聚合(ATRP)和分步方法,制备了以苯乙烯-丁二烯-苯乙烯嵌段共聚物(SBS)为聚合物Ⅰ,聚(苯乙烯-甲基丙烯酸甲酯)[P(St—MMA)]为聚合物Ⅱ的SBS／P(St—MMA)热塑性互穿聚合物网络(TIPN)。研究了P(St—MMA)质量分数、MMA／St(摩尔比)和不同聚合方式对TIPN动态力学性能和黏结性能的影响。结果表明,采用ATRP法制备的TIPN的动态力学性能和黏结性能均优于常规自由基聚合制备的TIPN。高温区聚苯乙烯(PSt)嵌段的玻璃化转变温度明显降低,而损耗角正切tanδ2显著增加;TIPN的黏结性能也得到明显改善,拉伸剪切强度提高了3倍多。     

Synthesis of poly(ethylene glycol-b-styrene) block copolymers by reverse atom transfer radical polymerization

Reverse atom transfer radical polymerization (RATRP) of styrene (S) was carried out in bulk using polyazoester prepared by the reaction of polyethylene glycol with molecular weight of 3000 and 4,4′-azobis(4-cyanopentanoyl chloride) as initiator and CuCl₂/2,2′-bipyridine (bpy) catalyst system to yield poly(ethylene glycol-b-styrene) block copolymer. The block copolymers were characterized ¹H NMR, FT-IR spectroscopy and GPC. The ¹H NMR, and FT-IR spectra showed that formation of poly(ethylene glycol-b-styrene) block copolymer. The polydispersities of block copolymers were observed between from 1.49 and 1.98 GPC measurements.     

Physicochemical characterization of poly(tert-butyl acrylate-b-methyl methacrylate) prepared with atom transfer radical polymerization by inverse gas chromatography

Poly(tert-butyl acrylate) (PtBuA) was synthesized by atom transfer radical polymerization (ATRP) using methyl-2-bromo propionate (MBP) as an initiator in bulk at 80 °C. The successive ATRP of methyl methacrylate in diphenyl ether at 80 °C using previously obtained PtBuA as a macroinitiator led to formation of poly(tert-butyl acrylate-b-methyl methacrylate) (poly(tBuA-b-MMA)). The synthesized macroinitiator and block copolymer have controlled molecular weight and low polydispersity (M_w/M_n<1.2). The block copolymer was characterized by gel permeation chromatography (GPC) and ¹H NMR. The retention diagrams of poly(tBuA-b-MMA) for some aliphatic esters and aromatic hydrocarbons were obtained using inverse gas chromatography (IGC) technique. The glass transition temperatures, T_gs of poly(tBuA-b-MMA) were determined by both differential scanning calorimeter (DSC) and IGC. It was observed that the block copolymer represents three T_gs at 50, 75 and 100 °C by IGC although it represents only one T_g at 71 °C by DSC. After the column was quenched from 180 to 0 °C, the T_g at 100 °C shifted to 105 °C however others did not change. Specific retention volumes, and the thermodynamical polymer-solvent interaction parameters such as Flory-Huggins, , equation-of-state, and effective exchange energy, X_eff were found for all studied solvents. Partial molar heat of sorption, , partial molar heat of mixing, and molar heat of vaporization, ΔH_v, were determined. In addition, the solubility parameter of the corresponding block copolymer, δ₂ was determined as 11.0 (cal/cm³)^1/2 at 25 °C.     

Graft copolymerization of poly(methyl methacrylate) with some alkyl methacrylates by atom transfer radical polymerization method and thermal properties

The preparation of graft copolymers of poly(methyl methacrylate) with some alkyl methacrylates were carried out via atom transfer radical polymerization method catalyzed by CuCl/2,2′-bipyridine and using a macroinitiator, poly[(methyl methacrylate)-co-(3,5-bis(chloroacetoxy)phenyl methacrylate)], including an amount of 1 mol % having α-halogeno carbonyl group in the side groups. Although the number-average molecular weights of a graft copolymer series of n-butyl methacrylate (n-ButMA) ended at different times increased from 55,700 to 99,500, the polydispersities decreased from 1.85 to 1.39 with time. The thermal degradation kinetics of macroinitiator and a two-armed graft copolymer of n-ButMA with this macroinitiator, PMMA-g-PnButMA: 4% (by mol), were carried out at different heating rates by thermogravimetric analysis and the results were compared. Using both the Flynn–Wall–Ozawa and Kissinger methods, the decomposition activation energies for macroinitiator were determined as 168 and 162 kJ/mol, respectively; they were also calculated as 233 and 239 kJ/mol for PMMA-g-PnButMA: 4%. The solid state thermodegradation mechanisms of both macroinitiator and PMMA-g-PnButMA: 4% are R₁-type mechanism, a phase boundary-controlled reaction, and F₁-type mechanism, a random nucleation with one nucleus on the individual particle, respectively. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Development of antifouling poly(vinyl chloride) blend membranes by atom transfer radical polymerization

In this study, antifouling poly(vinyl chloride) (PVC) blend membranes were prepared by blending the PVC based amphiphilic copolymer PVC‐g‐poly(hydroxyethyl methacrylate) (PVC‐g‐PHEMA), synthesized by atom transfer radical polymerization (ATRP), into the hydrophobic PVC matrix via the nonsolvent‐induced phase separation method. The in situ ATRP reaction solutions were also used as the blend additives to improve membrane performance. Attenuated total reflectance–Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy indicated that the blend membranes based on the two blend routes exhibited similar surface chemical compositions. The membrane morphology and surface wettability were determined by scanning electronic microscopy and water contact angle measurement, respectively. The blend membranes showed improved water permeability, comparable rejections and enhanced antifouling properties compared with the pure PVC membrane. The PVC blend membranes also had excellent long‐term stability in terms of chemical compositions and fouling resistance. The results demonstrated that ATRP was a promising technique to synthesize amphiphilic copolymer and prepare stable blend antifouling membranes. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45832.     

Synthesis of ABA triblock copolymer of poly(potassium acrylate-styrene-potassium acrylate) by atom transfer radical polymerization and the self-assembly in selective solvents

A series of well-defined ABA triblock copolymers of poly(methyl acrylate)-polystyrene-poly(methyl acrylate) (PMA-b-PS-b-PMA) with different molecular weights were synthesized using Cl-PS-Cl as macroinitiator, CuCl/N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) as catalyst system via atom transfer radical polymerization (ATRP). Amphiphilic triblock copolymer poly(potassium acrylate)-polystyrene-poly(potassium acrylate) (PKAA-b-PS-b-PKAA) was obtained by hydrolyzing PMA-b-PS-b-PMA. The self-assembly behavior of the triblock copolymers in organic solutions, which is a good solvent for the PS block and in aqueous solutions, which is a good solvent for the PKAA blocks was studied by high performance particle sizer (HPPS). The results showed that the Z-average size of the micelles obviously increases with increase in molecular weight of triblock copolymers, and the micelles in organic solutions are relatively more stable than in aqueous solutions. The effect of the length of PS block on the Z-average size of the micelles is more obvious in organic solution than in aqueous solution. The morphology of triblock copolymers PKAA-b-PS-b-PKAA in aqueous solution, which is a nearly ‘pearl-necklace’-like shape, was examined by transmission electron microscopy (TEM) at room temperature.     

Synthesis of amphiphilic poly(methyl methacrylate)‐block‐poly(methacrylic acid) diblock copolymers by atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) of 1‐(butoxy)ethyl methacrylate (BEMA) was carried out using CuBr/2,2′‐bipyridyl complex as catalyst and 2‐bromo‐2‐methyl‐propionic acid ester as initiator. The number average molecular weight of the obtained polymers increased with monomer conversion, and molecular weight distributions were unimodal throughout the reaction and shifted toward higher molecular weights. Using poly(methyl methacrylate) (PMMA) with a bromine atom at the chain end, which was prepared by ATRP, as the macro‐initiator, a diblock copolymer PMMA‐block‐poly [1‐(butoxy)ethyl methacrylate] (PMMA‐b‐PBEMA) has been synthesized by means of ATRP of BEMA. The amphiphilic diblock copolymer PMMA‐block‐poly(methacrylic acid) can be further obtained very easily by hydrolysis of PMMA‐b‐PBEMA under mild acidic conditions. The molecular weight and the structure of the above‐mentioned polymers were characterized with gel permeation chromatography, infrared spectroscopy and nuclear magnetic resonance. Copyright © 2005 Society of Chemical Industry     

Synthesis of poly(ethylene oxide)-block-poly(methyl methacrylate)-block-polystyrene triblock copolymers by two-step atom transfer radical polymerization

The synthesis of ABC triblock copolymer poly(ethylene oxide)-block-poly(methyl methacrylate)-block-polystyrene (PEO-b-PMMA-b-PS) via atom transfer radical polymerization (ATRP) is reported. First, a PEO-Br macroinitiator was synthesized by esterification of PEO with 2-bromoisobutyryl bromide, which was subsequently used in the preparation of halo-terminated poly(ethylene oxide)-block-poly(methyl methacrylate) (PEO-b-PMMA) diblock copolymers under ATRP conditions. Then PEO-b-PMMA-b-PS triblock copolymer was synthesized by ATRP of styrene using PEO-b-PMMA as a macroinitiator. The structures and molecular characteristics of the PEO-b-PMMA-b-PS triblock copolymers were studied by FT-IR, GPC and ¹H NMR.     

The amphiphilic block copolymers of 2-(dimethylamino)ethyl methacrylate and methyl methacrylate: Synthesis by atom transfer radical polymerization and solution properties

Amphiphilic di- and tri-block copolymers of poly(methyl methacrylate) (PMMA) and poly(2-dimethylamino)ethyl methacrylate (PDMAEMA) have been synthesized by atom transfer radical polymerization (ATRP) at ambient temperature (35 °C) in the environment-friendly solvent, aqueous ethanol (water 16 vol%) using CuCl/o-phenanthroline as the catalyst. The PDMAEMA blocks are contaminated with ethyl methacrylate (EMA) residues to the extent of 1-2 mol% of DMAEMA depending on the length of the PDMAEMA block. The EMA forms through the autocatalyzed ethanolysis of the DMAEMA monomer and undergoes random copolymerization with the latter. The rate of ethanolysis is unexpectedly greater in the aqueous ethanol than in neat ethanol, which has been attributed to the higher polarity of the former than of the latter. In contrast to the ethanolysis no hydrolysis of DMAEMA in the aqueous ethanol medium could be detected for 133 h. The block copolymers form micelles in water. Their solubility and CMC in neutral water have been studied. Dynamic light scattering (DLS) studies reveal that for a fixed degree of polymerization (DP) of the PMMA block the hydrodynamic diameter of the micelles in methanolic water (water 95 vol%) increases at a faster rate with the DP of the PDMAEMA block when it is much greater than that of the PMMA block compared to when it is less than or close to that of the latter.     

Direct synthesis of syndiotactic-rich poly(N-isopropylacrylamide) via radical polymerization of hydrogen-bond-complexed monomer

Radical polymerization of N-isopropylacrylamide (NIPAAm) in toluene was investigated in the presence of hexamethylphosphoramide (HMPA). We succeeded in directly preparing syndiotactic-rich poly(NIPAAm), the syndiotacticity of which (r=70%) is the highest among those of radically-prepared poly(NIPAAm)s so far reported, by lowering polymerization temperature to −60 °C in the presence of a two-fold amount of HMPA. The NMR analysis revealed that the induced syndiotactic-specificity was ascribed to 1:1 complex formation between NIPAAm and HMPA. Furthermore, thermodynamic analysis described that the induced syndiotactic-specificity was enthalpically achieved.     

Heterotactic poly(N-isopropylacrylamide) prepared via radical polymerization in the presence of fluorinated alcohols

Radical polymerization of N-isopropylacrylamide in toluene at −40 °C in the presence of fourfold amounts of fluorinated alcohols was investigated. The ¹³C NMR analysis of the obtained polymers suggested that the addition of fluorinated alcohols induced heterotactic specificity in radical polymerization of NIPAAm, although syndiotactic poly(NIPAAm)s were obtained by adding alkyl alcohols as we have previously reported. To the best of our knowledge, this is the first synthesis of heterotactic poly(NIPAAm).     

Convenient synthesis of poly(2,6-dihydroxy-1,5-naphthylene) by Cu(II)-amine catalyzed oxidative coupling polymerization

A convenient synthesis of regiocontrolled poly(2,6-dihydroxy-1,5-naphthylene) (PDHN) with high molecular weights by oxidative coupling polymerization of 2,6-dihydroxynaphthalene (2,6-DHN) has been developed. Polymerizations were conducted in 2-methoxyethanol in the presence of di-μ-hydroxo-bis[(N,N,N′,N′-tetramethylethylenediamine)copper (II)] chloride (CuCl(OH)TMEDA) as the catalyst under air at 25 °C. To determine the optimum conditions, the effects of the amounts of the catalysts and the solvents were investigated. In the presence of 5 mol% of the catalyst to the monomer in 2-methoxyethanol, polymerization proceeded smoothly, giving PDHN with a number average molecular weight (M_n) of 52,000. PDHN was converted to poly(2,6-dibutoxy-1,5-naphthylene) (PDBN) to improve the solubility. The structure of PDBN was characterized by ¹H and ¹³C NMR spectroscopy and was estimated to consist completely of the 1,5-linkage. The average refractive indices (n_AV) of the PDHN and PDBN films were 1.6003 and 1.5815, respectively, and the dielectric constants (ε) estimated from the refractive indices were 2.82 and 2.75, respectively.     

Amphiphilic poly(acrylic acid-b-styrene-b-isobutylene-b-styrene-b-acrylic acid) pentablock copolymers from a combination of quasiliving carbocationic and atom transfer radical polymerization

Amphiphilic poly(acrylic acid-b-styrene-b-isobutylene-b-styrene-b-acrylic acid) (PAA-PS-PIB-PS-PAA) block copolymers were prepared using a combination of quasiliving carbocationic and atom transfer radical polymerization (ATRP) techniques. Poly(styrene-b-isobutylene-b-styrene) (PS-PIB-PS) block copolymer macroinitiators with targeted molecular weights and high degrees of chain end functionality (F_n>1.7) were prepared by quasiliving carbocationic polymerization of isobutylene followed by sequential addition of styrene. Poly(tert-butyl acrylate-b-styrene-b-isobutylene-b-styrene-b-tert-butyl acrylate) (PtBA-PS-PIB-PS-PtBA) pentablock terpolymers with targeted molecular weights and low polydispersities (PDIs) were synthesized from the PS-PIB-PS macroinitiators via ATRP of tBA using either a Cu(I)Cl/1,1,4,7,7-pentamethyldiethylenetriamine (PMDETA) or Cu(I)Cl/tris[2-(dimethylamino)ethyl]amine (Me₆TREN) catalyst system. Deprotection of the tert-butyl groups using trifluoroacetic acid at 25 °C resulted in the formation of PAA-PS-PIB-PS-PAA pentablock terpolymers. Comonomer composition of the final terpolymers, determined by ¹H-NMR spectroscopy, was very close to theoretical.     

Synthesis of poly(epichlorohydrin‐g‐methyl methacrylate) graft copolymers by the combination of cationic and atom transfer radical polymerization

Poly(epichlorohydrin) possessing chloromethyl side groups in the main chain was used in the atom transfer radical polymerization of methyl methacrylate and styrene to yield poly(epichlorohydrin‐g‐methyl methacrylate) and poly(epichlorohydrin‐g‐styrene graft copolymers. The polymers were characterized by ¹H NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, and fractional precipitation method. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2725–2729, 2006     

Synthesis of poly(cyclohexene oxide)‐block‐polystyrene by combination of radical‐promoted cationic polymerization,atom transfer radical polymerization and click chemistry

The combination of radical‐promoted cationic polymerization, atom transfer radical polymerization (ATRP) and click chemistry was employed for the efficient preparation of poly(cyclohexene oxide)‐block‐polystyrene (PCHO‐b‐PSt). Alkyne end‐functionalized poly(cyclohexene oxide) (PCHO‐alkyne) was prepared by radical‐promoted cationic polymerization of cyclohexene oxide monomer in the presence of 1,2‐diphenyl‐2‐(2‐propynyloxy)‐1‐ethanone (B‐alkyne) and an onium salt, namely 1‐ethoxy‐2‐methylpyridinium hexafluorophosphate, as the initiating system. The B‐alkyne compound was synthesized using benzoin photoinitiator and propargyl bromide. Well‐defined bromine‐terminated polystyrene (PSt‐Br) was prepared by ATRP using 2‐oxo‐1,2‐diphenylethyl‐2‐bromopropanoate as initiator. Subsequently, the bromine chain end of PSt‐Br was converted to an azide group to obtain PSt‐N₃ by a simple nucleophilic substitution reaction. Then the coupling reaction between the azide end group in PSt‐N₃ and PCHO‐alkyne was performed with Cu(I) catalysis in order to obtain the PCHO‐b‐PSt block copolymer. The structures of all polymers were determined. Copyright © 2010 Society of Chemical Industry     

Synthesis and characterization of poly(vinyl chloride‐co‐vinyl acetate)‐graft‐poly[(meth)acrylates] by atom transfer radical polymerization

The graft polymerization of methyl methacrylate and butyl acrylate onto poly(vinyl chloride‐co‐vinyl acetate) with atom transfer radical polymerization (ATRP) was successfully carried out with copper(I) thiocyanate/N,N,N′,N′,N″‐pentamethyldiethylenetriamine and copper(I) chloride/2,2′‐bipyridine as catalysts in the solvent N,N‐dimethylformamide. For methyl methacrylate, a kinetic plot of ln([M]₀/[M]) (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) versus time for the graft polymerization was almost linear, and the molecular weight of the graft copolymer increased with increasing conversion, this being typical for ATRP. The formation of the graft polymer was confirmed with gel permeation chromatography, ¹H‐NMR, and Fourier transform infrared spectroscopy. The glass‐transition temperature of the copolymer increased with the concentration of methyl methacrylate. The graft copolymer was hydrolyzed, and its swelling capacity was measured. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 183–189, 2005