Nitroxide‐mediated polymerization of styrene initiated from the surface of montmorillonite clay platelets

Polymer‐grafted montmorillonite (MMT) hybrid composites which possess a hard backbone of MMT and a soft shell of brush‐like polystyrene (PSt) were prepared via “grafting from” strategy based on nitroxide‐mediated radical polymerization (NMRP) using 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO) as mediator. Three steps were used to graft PSt chains to the surface of MMT: anchoring of methacrylatoethyl trimethyl ammonium chloride (DMC) onto the surface of MMT by ion exchange reaction first. And then, the surface alkoxyamine initiator was produced in a one‐step process by reacting simultaneously TEMPO, BPO, and DMC in the presence of MMT. Next, PSt chains with controlled molecular weights and polydispersities were grown from the alkoxyamine functionalized MMT surface. The prepared PSt‐g‐MMT hybrid particles have been extensively characterized by FTIR, XPS, XRD, TGA, TEM, respectively. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Controlled atom transfer radical polymerization of MMA onto the surface of high-density functionalized graphene oxide

We report on the grafting of poly(methyl methacrylate) (PMMA) onto the surface of high-density functionalized graphene oxides (GO) through controlled radical polymerization (CRP). To increase the density of surface grafting, GO was first diazotized (DGO), followed by esterification with 2-bromoisobutyryl bromide, which resulted in an atom transfer radical polymerization (ATRP) initiator-functionalized DGO-Br. The functionalized DGO-Br was characterized by X-ray photoelectron spectroscopy (XPS), Raman, and XRD patterns. PMMA chains were then grafted onto the DGO-Br surface through a ‘grafting from’ technique using ATRP. Gel permeation chromatography (GPC) results revealed that polymerization of methyl methacrylate (MMA) follows CRP. Thermal studies show that the resulting graphene-PMMA nanocomposites have higher thermal stability and glass transition temperatures (T_g) than those of pristine PMMA.     

Chemical Functionalization of Graphene Oxide by Poly(styrene sulfonate) Using Atom Transfer Radical and Free Radical Polymerization: A Comparative Study

Poly(sodium styrenesulfonate)-functionalized graphene was prepared from graphene oxide, using atom transfer radical polymerization and free radical polymerization. In atom transfer radical polymerization route, the amine-functionalized GO was synthesized through hydroxyl group reaction of GO with 3-amino propyltriethoxysilane. Atom transfer radical polymerization initiator was grafted onto modified GO (GO-NH₂) by reaction of 2-bromo-2-methylpropionyl bromide with amine groups, then styrene sulfonate monomers were polymerized on the surface of GO sheets by in situ atom transfer radical polymerization. In free radical polymerization route, the poly(sodium 4-styrenesulfonate) chains were grafted on GO sheets in presence of Azobis-Isobutyronitrile as an initiator and styrene sulfonate monomer in water medium. The resulting modified GO was characterized using range of techniques. Thermal gravimetric analysis, scanning electron microscopy, transmission electron microscopy, and atomic force microscopy results indicated the successful graft of polymer chains on GO sheets. Thermogravimetric analysis showed that the amount of grafted polymer was 22.5 and 31?wt% in the free radical polymerization and atom transfer radical polymerization methods, respectively. The thickness of polymer grafted on GO sheets was 2.1?nm (free radical polymerization method) and 6?nm (atom transfer radical polymerization method) that was measured by atomic force microscopy analysis. X-ray diffractometer and transmission electron microscopy indicated that after grafting of poly(sodium 4-styrenesulfonate), the modified GO sheets still retained isolated and exfoliated, and also the dispersibility was enhanced.     

Graphene oxide-anchored reactive sulfonated copolymer via simple one pot condensation polymerization: proton-conducting solid electrolytes

A rapid and efficient post-polymerization functionalization of poly(urea-co-urethane) (PUU) onto the graphene oxide (GO) nanosheets has been developed to produce super-acidic polymer/GO hybrid nanosheets. Thus, the surface of GO nanosheets were functionalized with 3-(triethoxysilyl)propyl isocyanate (TESPIC) from hydroxyl groups to yield isocyanate functionalized graphene oxide nanosheets. Then, sulfonated polymer/GO hybrid nanosheets were prepared by condensation polymerization of isocyanate-terminated pre-polyurea onto isocyanate functionalized graphene oxide nanosheets through the formation of carbamate bonds. FTIR and TGA results indicated that TESPIC modifier agent and poly(urea-co-urethane) were successfully grafted onto the GO nanosheets. The grafting efficiency of poly(urea-co-urethane) polymer onto the GO nanosheets was estimated from TGA thermograms to be 205.9%. Also, sulfonated polymer/GO hybrid nanosheets showed a proton conductivity as high as 3.7 mS cm^?1. Modification and morphology of GO nanosheets before and after modification processes were studied by scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD).     

A replicated investigation of nitroxide‐mediated radical polymerization of styrene over a range of reaction conditions

A comprehensive experimental investigation of nitroxide‐mediated radical polymerization (NMRP) of styrene using 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) as controller is presented. Polymerizations with a bimolecular initiator (benzoyl peroxide; BPO) were carried out at 120 and 130°C, with TEMPO/BPO molar ratios ranging from 0.9 to 1.5. Results indicate that increasing temperature increases the rate of polymerization while the decrease in molecular weights is only slight. It was also observed that increasing the ratio of TEMPO/BPO decreased both the rate of polymerization and molecular weights. Probably for the first time in the history of such investigations, the paper contains a comprehensive database, appropriate for parameter estimation in aid of future modelling studies, since it comes from a systematic data collection containing independent replication.     

Effect of the addition of inert or TEMPO‐capped prepolymer on polymerization rate and molecular weight development in the nitroxide‐mediated radical polymerization of styrene

The importance of diffusion‐controlled (DC) effects on controlled radical polymerization (CRP) processes has been rather controversial and usually considered only if there is some mismatch between experimental data and model predictions of polymerization rate and molecular weight averages. Results from an experimental study designed to create conditions in which DC effects may be present from the outset for the bimolecular nitroxide‐mediated radical polymerization (NMRP) of styrene in the presence of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) and dibenzoyl peroxide (BPO), are presented herein. The experiments consisted of adding size exclusion chromatography (SEC) polystyrene (PS) standards or nitroxyl‐capped PS (of different molecular weights, in several proportions), to a conventional recipe of bimolecular NMRP of styrene, and studying the effect of their presence on polymerization rate and molecular weight development. A previously developed kinetic model for NMRP of styrene was modified to take into account the presence of prepolymer as an inert “solvent,” or as a monomolecular “controller” of high molecular weight. The effects of DC reactions (propagation, termination, activation, and deactivation of polymer radicals) were modeled using conventional free‐volume theory. Reasonably, good agreement between experimental data and model predictions with either modeling approach was obtained. It was concluded that DC effects are weak in the NMRP of styrene, even in the presence of prepolymer. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Styrenation of triglyceride oil by nitroxide mediated radical polymerization

Styrenated oil was obtained by nitroxide mediated radical polymerization (NMRP) method in the presence of 2,2′,6,6′-tetramethylpiperidinyl-1-oxy (TEMPO). For this purpose, firstly, macroinitiator having thermally unstable azo groups was obtained with reaction of partial glycerides (PGs) mixture and 4,4′-azobis-4-cyanopentanoyl chloride (ACPC). Then, the macroinitiator was subjected to polymerization with styrene in the presence of TEMPO in order to obtain a copolymer with controlled structure and low polydispersity. The products thus obtained were characterized by GPC, ¹H NMR and FT-IR measurements. A classical styrenated oil was also prepared for comparison. The film properties of the products were determined according to the related standards and compared with each other. The product obtained at the end of the 72 h in the presence of TEMPO showed to some extent brittle film properties. To improve the film properties, this product was further reacted with the oil-based vinyl macromonomer (MM). The styrenated oil samples prepared by the controlled polymerization method, exhibited relatively low polydispersity (<1.5) and showed good film properties.     

Thermal polymerization of styrene in the presence of TEMPO

To investigate aspects of the contribution of (thermal) self-initiation in nitroxide-mediated radical polymerization (NMRP) of styrene, selective styrene polymerizations with 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) in the absence of initiator were carried out at 120 and 130 °C. The results of these experiments (including conversion data, molecular weight averages, polydispersity and molecular weight distribution information) were compared with regular thermal polymerization of styrene and NMRP of styrene in the presence of a bimolecular initiator (benzoyl peroxide; BPO). It was observed that although the thermal polymerization of styrene can be controlled to some extent in the presence of TEMPO to provide polystyrene with low polydispersity, the polymerization was never as controlled as that obtained by a BPO-initiated NMRP.     

Synthesis of polystyrene oligomers by nitroxide‐mediated radical polymerization using diethylketone triperoxide as a multifunctional radical initiator

Styrene oligomers (M_n, 2500–3000 g/mol) with low polydispersity index and containing peroxidic groups within their structure were synthesized using a novel trifunctional cyclic radical initiator, diethylketone triperoxide (DEKTP), through nitroxide‐mediated radical polymerization (NMRP), using OH‐TEMPO. During the synthesis of the polystyrene (PS) oligomers, camphorsulfonic acid (CSA) was used to inhibit the thermal autoinitiation of styrene at the evaluated temperatures (T = 120–130°C). The polymerization rate, which can be related to the slope of the plot of monomer conversion with reaction time, was monitored as a function of OH‐TEMPO, DEKTP, and CSA concentrations. The experimental results showed that all the synthesized polymers presented narrow molecular weight distributions, and the monomer conversion and the molecular weight of the polymers increased as a function of reaction time. Under the experimental conditions, T = 130°C, [DEKTP] = 10 mM, and [DEKTP]/[OH‐TEMPO] = 6.5, PS oligomers containing unreacted O? O sites in their inner structure were obtained. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Covalent modification of graphene oxide with polynorbornene by surface-initiated ring-opening metathesis polymerization

Surface-initiated ring-opening metathesis polymerization (SI-ROMP) was employed to prepare polymer-grafted graphene oxide (GO). Grubbs catalysts were immobilized onto GO surfaces followed by ROMP of norbornene from these active catalyst sites to result in polynorbornene (PNb)-functionalized GO (GO-PNb), whose structure and morphology were fully characterized by FTIR, Raman, NMR, XRD, TGA and SEM. The as-prepared hybrid material of GO-PNb is an intercalated layer structure with an improved solubility in organic solvents. Further epoxidation of double bonds along the PNb chains resulted in the epoxidized PNb-functionalized GO (GO-ePNb). The relatively low and irregular grafting ratio of PNb on GO measured by gravimetry mainly result from the effect of complex GO surfaces and the chain-transfer reactions in the polymerization process.     

Highly thermal conductive composites with polyamide-6 covalently-grafted graphene by an in situ polymerization and thermal reduction process

The thermal conductive polyamide-6/graphene (PG) composite is synthesized by in situ ring-opening polymerization reaction using ε-caprolactam as the monomer, 6-aminocaproic acid as the initiator and reduced graphene oxide (RGO) as the thermal conductive filler. The generated polyamide-6 (PA6) chains are covalently grafted onto graphene oxide (GO) sheets through the “grafting to” strategy with the simultaneous thermal reduction reaction from GO to RGO. The homogeneous dispersion of RGO sheets in PG composite favors the formation of the consecutive thermal conductive paths or networks at a relatively low GO sheets loading, which improves the thermal conductivity (λ) from 0.196 W m⁻¹ K⁻¹ of neat PA6 to 0.416 W m⁻¹ K⁻¹ of PG composite with only 10 wt% GO sheets loading.     

Styrenation of air-blown linseed oil by nitroxide-mediated radical polymerization

Styrenation of air-blown linseed oil by a nitroxide-mediated radical polymerization (NMRP) technique is described. In this technique, air-blown linseed oil bearing hydroperoxide groups was used as a macroinitiator in NMRP of styrene in the presence of 2,2′,6,6′-tetramethylpiperidinyl-1-oxy (TEMPO). The effects of various parameters, such as the amount of TEMPO and hydroperoxide groups, were investigated in terms of molecular weight and polydispersity. For comparison, a copolymer sample of air-blown linseed oil with styrene was also prepared in the absence of TEMPO. The film properties of all samples were determined according to the related standards and were compared with respect to surface protection. Samples prepared by the NMRP technique exhibited relatively narrow polydispersity and better film properties compared to those of the samples obtained by the conventional method.     

Graphene‐reinforced biodegradable poly(ethylene succinate) nanocomposites prepared by in situ polymerization

In this study, poly(ethylene succinate)(PES)/graphene nanocomposites were facilely prepared by in situ melt polycondensation of succinic acid and ethylene glycol in which contained well dispersed graphene oxide (GO). Fourier transform infrared (FTIR), GPC, TGA, and XRD were used to characterize the composites. The FTIR spectra and TGA measurement confirmed that PES chains had been successfully grafted onto GO sheets along with the thermal reduction of GO to graphene during the polymerization. GPC results indicated that increasing amounts of graphene caused a slight decrease in number average molecular weight of PES matrix when polymerization time was kept constant. The content of grafted PES chains on graphene sheets was also determined by TGA and was to be about 60%, which made the graphene sheets homogeneously dispersed in the PES matrix, as demonstrated by SEM and XRD investigations. Furthermore, the incorporation of thermally reduced graphene improved the thermal stability and mechanical properties of the composites significantly. With the addition of 0.5 wt % graphene, onset decomposition temperature of the composite was increased by 12°C, and a 45% improvement in tensile strength and 60% in elongation at break were also achieved. The enhanced performance of the composites is mainly attributed to the uniform dispersion of graphene in the polymer matrix and the improved interfacial interactions between both components. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3212–3220, 2013     

Influence of structure of amines on the properties of amines‐modified reduced graphene oxide/polyimide composites

Graphene oxide (GO), as an important precursor of graphene, was functionalized using alkyl‐amines with different structure and then reduced to prepare reduced amines grafted graphene oxide (RAGOs) by N₂H₄ · H₂O. The successful chemical amidation reaction between amine groups of alkyl‐amines and carboxyl groups of GO was confirmed by Fourier transform infrared (FTIR), X‐ray photoelectron spectroscopy (XPS), and thermal gravimetric analysis (TGA). Then RAGOs/polyimide nanocomposites were prepared via in situ polymerization and thermal curing process with different loadings of RAGOs. The modification of amine chains lead to homogenous dispersion of RAGOs in the composites and it formed strong interfacial adhesion between RAGOs and the polymer matrix. The mechanical and electrical properties of polyimide (PI) were significantly improved by incorporation of a small amount of RAGOs, the influence of structure of amines grafted on RAGOs on the enhancement effects of composites was discussed. The research results indicated that the proper structure of amine could effectively enhance the properties of composites. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43820.     

Synthesis and reactivity of functionalized alkoxyamine initiators for nitroxide‐mediated radical polymerization of styrene

The synthesis and examination of different functionalized (2,2,6,6‐tetramethyl‐1‐piperidinyloxy free radical) TEMPO‐containing alkoxyamine initiators for nitroxide‐mediated radical polymerization of styrene are reported. Initiators with ester and carbonate functional groups were synthesized by a low‐temperature radical‐abstraction reaction of the functionalized ethylbenzene in the presence of TEMPO to introduce the functional groups onto the initiating chain‐end of polystyrene. An initiator with two alkoxyamine groups symmetrically located at each end of a carbonate bond was also synthesized and used for nitroxide‐mediated styrene polymerization. Styrene polymerization using these initiators followed first‐order kinetics up to approximately 60 min at 140 °C or 30% monomer conversion. Alkoxyamines bearing an acetoxy or tert‐butylcarbonate group at the p‐position of 1‐(2,2,6,6‐tetramethyl‐1‐piperidinyloxy)ethylbenzene behave in a similar way to the unfunctionalized initiator. With an initiator containing two alkoxyamine groups, the resulting polymer molecular weight was twice that of the polymer obtained from initiators with only one alkoxyamine group, as expected from propagation from both chain‐ends. Upon hydrolysis of the carbonate bond, it was revealed that equivalent polymer chain growth occurred from each alkoxyamine site in the difunctional initiator. Copyright © 2003 Society of Chemical Industry     

Grafting of polymer chains on the surface of carbon nanotubes via nitroxide radical coupling reaction

Poly(butylene succinate) (PBS) was grafted on the surface of TEMPO (2,2,6,6‐tetramethyl‐1‐piperidinyloxy) modified multi‐walled carbon nanotubes (MWCNTs) via a nitroxide radical coupling reaction. TEMPO functionalized MWCNTs (MWCNTs‐g‐TEMPO) were synthesized using the Cu(I)‐catalyzed azide/alkyne click chemistry approach and the covalent bond of the nitroxide moieties onto the MWCNTs was confirmed via electron paramagnetic resonance (EPR) spectroscopy. The PBS grafting on the sidewalls of MWCNTs was carried out in solution via peroxide‐induced formation of macroradicals and it was confirmed by EPR and attenuated total reflectance Fourier transform infrared analysis. Preliminary rheological and calorimetric analyses revealed that the grafting improves both the quality of stress transfer across the polymer ? nanotube interface and the degree of dispersion of the filler, which also exhibited a moderate nucleating action on the PBS. Overall, our results demonstrate that nitroxide radical coupling is an efficient and feasible ‘grafting to’ method to covalently bond polymer chains on MWCNTs with possible advantages in the final properties of the polymer nanocomposites. © 2015 Society of Chemical Industry     

Edge‐functionalized graphene nanoplatelets with polystyrene by atom transfer radical polymerization: grafting through carboxyl groups

The surface modifier 3‐((4‐hydroxybutoxy)dimethylsilyl)propyl methacrylate (CD), which contains a double bond and a hydroxyl group, was synthesized through a coupling reaction of 1,4‐butanediol and (3‐methacryloxypropyl)dimethylchlorosilane. Subsequently, graphene oxide (GO) was functionalized with different amounts of CD from its edge carboxyl groups. Then, grafting through atom transfer radical polymerization of styrene in the presence of various amounts of the edge‐functionalized GO was carried out to evaluate the effect of graphene loading along with graft density. A peak at 3.8 ppm in the ¹H NMR spectrum of CD associated with the methylene adjacent to the Si–O group indicated a successful coupling reaction. Attachment of CD on the edges of GO was evaluated using X‐ray photoelectron and Fourier transform infrared spectroscopies. Expansion of GO interlayer spacing by functionalization was evaluated using X‐ray diffraction. The ordered and disordered crystal structure of carbon was studied using Raman spectroscopy. The close I_D/I_G values for GO and various kinds of functionalized graphenes show the preserved graphitic crystallite size. Relaxation behaviour of polystyrene chains in the presence of graphene nanoplatelets and also the effect of graft content on chain confinement were studied using differential scanning calorimetry. High‐graft‐density nanocomposites show higher glass transition temperatures. Morphology of graphene nanoplatelets was studied using scanning electron and transmission electron microscopies. The flat and smooth morphology of graphene nanoplatelets is disturbed and also the transparency of the nanoplatelets decreases during the oxidation and functionalization processes. © 2014 Society of Chemical Industry     

Grafting polystyrene with various graft densities through epoxy groups of graphene nanolayers via atom transfer radical polymerization

A double bond and amine group containing chemical (OD) was synthesized by coupling reaction of ethylenediamine and 3‐(chlorodimethylsilyl)propyl methacrylate. Subsequently, graphene oxide (GO) was functionalized with OD in different densities via ring opening of its epoxy groups. The graphene containing double bond (GOD) was incorporated into polystyrene (PS) chains by a grafting through atom transfer radical polymerization. Grafting of OD at the surface of GO was confirmed by Fourier transform infrared spectroscopy and thermogravimetric analysis (TGA). The interlayer spacing of the graphenes was evaluated by X‐ray diffraction. Molecular weight and PDI values of the free and attached PS chains were studied by size exclusion chromatography. TGA was also used to study the degradation points, char values, and grafting ratios. Relaxation of PS chains in the presence of graphene layers was evaluated by differential scanning calorimetry. Scanning electron and transmission electron microscopies show that flat graphene layers are wrinkled during oxidation and functionalization processes. POLYM. COMPOS., 38:2450–2458, 2017. © 2015 Society of Plastics Engineers     

Organic/inorganic hybrid composites prepared by polymerization compounding and controlled free radical polymerization

A new method to produce highly filled and well dispersed polymer solid composites using controlled free radical polymerization has been developed. Grafting of polymers onto ultrafine silica was done in bulk polymerization at 120 °C in presence of N-tert-butyl-1-diethylphosphono2,2-dimethyl propyl nitroxide (DEPN) as a nitroxide stable free radical. Optimum conditions for tert-butyl hydroperoxide grafting onto fumed silica were first determined. The percentage of grafting, the architecture of grafted polymers, the length of chains, and the polydispersity index can be controlled at will using this approach. The effect of the number of grafted polymer chains combined with its molecular weight on the processing of these materials was investigated. The syntheses performed in this work gave grafting percentages of polymers and copolymers ranging from 12 to 88 wt%. All ‘synthesized’ composites gave stable suspensions in toluene and tetrahydrofuran.     

Nitroxide mediated living radical polymerization of styrene in miniemulsion—modelling persulfate-initiated systems

Recently we have constructed a mechanistic model describing the nitroxide mediated miniemulsion polymerization (NMMP) of styrene at 135°C, using alkoxyamine initiators to control polymer growth (Nitroxide-Mediated Polymerization of Styrene in Miniemulsion. Modeling Studies of Alkoxyamine-Initiated Systems, 2001b). The model has since been expanded to describe styrene NMMP at 135°C using TEMPO and the free radical initiator, potassium persulfate (KPS). The model includes mechanisms describing reactions in the aqueous and organic phases, particle nucleation, the entry and exit of oligomeric radicals, and the partitioning of nitroxide and styrene between the aqueous and organic phases. Predicted monomer conversions, number average molecular weights and polydispersities were in agreement with experimentally measured values. Model simulations revealed that for systems employing high ratios of TEMPO:KPS, the consumption of TEMPO by polymer radicals derived from KPS decomposition and styrene thermal initiation (using the accepted literature kinetic rates) is not sufficient to lower TEMPO concentrations to levels where polymer growth can occur. By accounting for the consumption of TEMPO by acid-catalyzed disproportionation, TEMPO concentrations are significantly reduced, allowing for accurate model predictions of monomer conversion, number average molecular weight and polydispersity at every experimental condition considered.