Triptycene-based microporous polyimides: Synthesis and their high selectivity for CO2 capture

A series of triptycene-based porous polyimides (STPIs) were synthesized by condensation polymerizations. The structure and properties of these STPIs were characterized by IR, solid ¹³C NMR, powder XRD, SEM, TEM and gas absorption. As STPI-2 with the high thermal stability, they display excellent adsorption ability to CO₂ uptake capacity of 14.6 wt% (273 K), and exhibit the high selectivity of CO₂/N₂ of 107.     

Partial O2-fired coal power plant with post-combustion CO2 capture: A retrofitting option for CO2 capture ready plants

In the work presented in this paper, an alternative process concept that can be applied as retrofitting option in coal-fired power plants for CO₂ capture is examined. The proposed concept is based on the combination of two fundamental CO₂ capture technologies, the partial oxyfuel mode in the furnace and the post-combustion solvent scrubbing. A 330 MW_el Greek lignite-fired power plant and a typical 600 MW_el hard coal plant have been examined for the process simulations. In a retrofit application of the ECO-Scrub technology, the existing power plant modifications are dominated by techno-economic restrictions regarding the boiler and the steam turbine islands. Heat integration from processes (air separation, CO₂ compression and purification and the flue gas treatment) can result in reduced energy and efficiency penalties. In the context of this work, heat integration options are illustrated and main results from thermodynamic simulations dealing with the most important features of the power plant with CO₂ capture are presented for both reference and retrofit case, providing a comparative view on the power plant net efficiency and energy consumptions for CO₂ capture. The operational characteristics as well as the main figures and diagrams of the plant’s heat balances are included.     

Microporous phenol-formaldehyde resin-based adsorbents for pre-combustion CO2 capture

Different types of phenolic resins were used as precursor materials to prepare adsorbents for the separation of CO₂ in pre-combustion processes. In order to obtain highly microporous carbons with suitable characteristics for the separation of CO₂ and H₂ under high pressure conditions, phenol-formaldehyde resins were synthesised under different conditions. Resol resins were obtained by using an alkaline environment while Novolac resins were synthesised in the presence of acid catalysts. In addition, two organic additives, ethylene glycol (E) and polyethylene glycol (PE) were included in the synthesis. The phenolic resins thus prepared were carbonised at different temperatures and then physically activated with CO₂. The carbons produced were characterised in terms of texture, chemical composition and surface chemistry. Maximum CO₂ adsorption capacities at atmospheric pressure were determined in a thermogravimetric analyser. Values of up to 10.8 wt.% were achieved. The high-pressure adsorption of CO₂ at room temperature was determined in a high-pressure magnetic suspension balance. The carbons tested showed enhanced CO₂ uptakes at high pressures (up to 44.7 wt.% at 25 bar). In addition, it was confirmed that capture capacities depend highly on the microporosity of the samples, the narrow micropores (pore widths of less than 0.7 nm) being the most active in CO₂ adsorption at atmospheric pressure. The results presented in this work suggest that phenol-formaldehyde resin-derived activated carbons, particularly those prepared with the addition of ethylene glycol, show great potential as adsorbents for pre-combustion CO₂ capture.     

Reactivation and remaking of calcium aluminate pellets for CO2 capture

CaO-based pellets supported with aluminate cements show superior performance in carbonation/calcination cycles for high-temperature CO₂ capture. However, like other CaO-based sorbents, their CO₂ carrying activity is reduced after increasing numbers of cycles under high-temperature, high-CO₂ concentration conditions. In this work the feasibility of their reactivation by steam or water and remaking (reshaping) was investigated. The pellets, prepared from three limestones, Cadomin and Havelock (Canada) and Katowice (Poland, Upper Silesia), were tested in a thermogravimetric analyzer (TGA). The cycles were performed under realistic CO₂ capture conditions, which included calcination in 100% CO₂ at temperatures up to 950 °C. Typically, after 30 cycles, samples were hydrated for 5 min with saturated steam at 100 °C in a laboratory steam reactor (SR). Moreover, larger amounts of pellets were cycled in a tube furnace (TF), hydrated with water and reshaped, and tested to determine their CO₂ capture activity in the TGA. It was found that, after the hydration stage, pellets recovered their activity, and more interestingly, pellets that had experienced a longer series of cycles responded more favorably to reactivation. Moreover, it was found that conversion of pellets increased after about 70 cycles (23%), reaching 33% by about cycle 210, with no reactivation step. Scanning electron microscope (SEM) analyses showed that the morphology of the low-porosity shell formed at the pellet surface during cycles, which limits conversion, was eliminated after a short period (5 min) of steam hydration. The nitrogen physisorption analyses (BET, BJH) of reshaped spent pellets from cycles in the TF confirmed that sorbent surface area and pore size distribution were similar to those of the original pellets. The main alumina compound in remade pellets as determined by XRD was mayenite (Ca₁₂Al₁₄O₃₃). These results showed that, with periodic hydration/remaking steps, pellets can be used for extended times in CO₂ looping cycles, regardless of capture/regeneration conditions.     

CO2 capture by adsorption with nitrogen enriched carbons

The success of CO₂ capture with solid sorbents is dependent on the development of a low cost sorbent with high CO₂ selectivity and adsorption capacity. Immobilised amines are expected to offer the benefits of liquid amines in the typical absorption process, with the added advantages that solids are easy to handle and that they do not give rise to corrosion problems. In this work, different alkylamines were evaluated as a potential source of basic sites for CO₂ capture, and a commercial activated carbon was used as a preliminary support in order to study the effect of the impregnation. The amine coating increased the basicity and nitrogen content of the carbon. However, it drastically reduced the microporous volume of the activated carbon, which is chiefly responsible for CO₂ physisorption, thus decreasing the capacity of raw carbon at room temperature.     

Evaluation of solid sorbents as a retrofit technology for CO2 capture

Processes based upon solid sorbents are currently under consideration for post-combustion CO₂ capture. Twenty-four different sorbent materials were examined on a laboratory scale in a cyclic temperature swing adsorption/regeneration CO₂ capture process in simulated coal combustion flue gas. Ten of these materials exhibited significantly lower theoretical regeneration energies compared to the benchmark aqueous monoethanolamine, supporting the hypothesis that CO₂ capture processes based upon solids may provide cost benefits over solvent-based processes. The best performing materials were tested on actual coal-fired flue gas. The supported amines exhibited the highest working CO₂ capacities, although they can become poisoned by the presence of SO₂. The carbon-based materials showed excellent stability but were generally categorized as having low CO₂ capacities. The zeolites worked well under dry conditions, but were quickly poisoned by the presence of moisture. Although no one type of material is without concerns, several of the materials tested have theoretical regeneration energies significantly lower than that of the industry benchmark, warranting further development research.     

Development of low-cost biomass-based adsorbents for postcombustion CO2 capture

In this work a series of carbon adsorbents were prepared from a low-cost biomass residue, olive stones. Two different approaches were studied: activation with CO₂ and heat treatment with gaseous ammonia. The results showed that both methods are suitable for the production of adsorbents with a high CO₂ adsorption capacity, and their potential application in VSA or TSA systems for postcombustion CO₂ capture. It was found that the presence of nitrogen functionalities enhances CO₂ adsorption capacity, especially at low partial pressures.     

CO2 capture using oxygen enhanced combustion strategies for natural gas power plants

This paper describes a series of experiments conducted with natural gas in air and in mixtures of oxygen and recycled flue gas, termed O₂/CO₂ recycle combustion. The objective is to enrich the flue gas with CO₂ to facilitate its capture and sequestration. Detailed measurements of gas composition, flame temperature and heat flux profiles were taken inside CANMET's 0.3 MWth down-fired vertical combustor fitted with a proprietary pilot scale burner. Flue gas composition was continuously monitored. The effects of burner operation, including swirling of secondary stream and air staging, on flame characteristics and NO_x emissions were also studied. The results of this work indicate that oxy-gas combustion techniques based on O₂/CO₂ combustion with flue gas recycle offer excellent potential for retrofit to conventional boilers for CO₂ emission abatement. Other benefits of the technology include considerable reduction and even elimination of NO_x emissions, improved plant efficiency due to lower gas volume and better operational flexibility.     

Techno-economic evaluation of a PVAm CO2-selective membrane in an IGCC power plant with CO2 capture

Published data for an operating power plant, the ELCOGAS 315 MWe Puertollano plant, has been used as a basis for the simulation of an integrated gasification combined cycle process with CO₂ capture. This incorporated a fixed site carrier polyvinylamine membrane to separate the CO₂ from a CO-shifted syngas stream. It appears that the modified process, using a sour shift catalyst prior to sulphur removal, could achieve greater than 85% CO₂ recovery at 95 vol% purity. The efficiency penalty for such a process would be approximately 10% points, including CO₂ compression. A modified plant with CO₂ capture and compression was calculated to cost €2320/kW, producing electricity at a cost of 7.6 € cents/kWh and a CO₂ avoidance cost of about €40/tonne CO₂.     

Experimental programme in CIUDEN's CO2 capture technology development plant for power generation

Energy projections made by the World Energy Council, the International Energy Agency (IEA) and the US Energy Information Administration give similar pictures of the dominant role of fossil fuel in the future primary energy global demand and the necessity of incorporating CCS Technologies as part of the portfolio of solutions to reach the target world emission reduction in the coming years. Without CCS, CO₂ emission levels by 2050 are expected to increase by 70%.One of the most relevant initiatives for the deployment of CCS technologies is promoted by the Spanish Government through the institution Fundacion Ciudad de la Energia (CIUDEN). CIUDEN is developing a complete programme focusing on the development of CCT and CCS technologies in Europe.CIUDEN's CO₂ capture programme includes the construction and operation of a Technology Development Plant (TDP) in NW Spain (El Bierzo). The construction of the installation started in November 2008 and incorporates the following technologies: fuel preparation system, pulverised coal boiler (20 MWth), circulating fluidized bed boiler (30 MWth), biomass gasifier (3 MWth), flue gas cleaning train for NO_x, dust and SO_x, and CO₂ processing unit.This paper describes CIUDEN's TDP for CO₂ capture, focusing on the particularities of the installation and design, and especially on the PC unit and equipment required for its operation. The experimental programme currently under way is also described.Results are expected to be an extraordinary advance in the development and strengthening of CCT and CCS technologies, particularly oxycombustion.     

Cyclic CO2 capture behavior of KMnO4-doped CaO-based sorbent

This study examines the CO₂ capture behavior of KMnO₄-doped CaO-based sorbent during the multiple calcination/carbonation cycles. The cyclic carbonation behavior of CaCO₃ doped with KMnO₄ and the untreated CaCO₃ was investigated. The addition of KMnO₄ improves the cyclic carbonation rate of the sorbent above carbonation time of 257 s at each carbonation cycle. When the mass ratio of KMnO₄/CaCO₃ is about 0.5-0.8 wt.%, the sorbent can achieve an optimum carbonation conversion during the long-term cycles. The carbonation temperature of 660-710 °C is beneficial to cyclic carbonation of KMnO₄-doped CaCO₃. The addition of KMnO₄ improves the long-term performance of CaCO₃, resulting in directly measured conversion as high as 0.35 after 100 cycles, while the untreated CaCO₃ retains conversion less than 0.16 at the same reaction conditions. The addition of KMnO₄ decreases the surface area and pore volume of CaCO₃ after 1 cycle, but it maintains the surface area and pores between 26 nm and 175 nm of the sorbent during the multiple cycles. Calculation reveals that the addition of KMnO₄ improves the CO₂ capture efficiency significantly using a CaCO₃ calcination/carbonation cycle and decreases the amount of the fresh sorbent.     

Cyclic calcination/carbonation looping of dolomite modified with acetic acid for CO2 capture

The dolomite modified with acetic acid solution was proposed as a CO₂ sorbent for calcination/carbonation cycles. The carbonation conversions for modified and original dolomites in a twin fixed-bed reactor system with increasing the numbers of cycles were investigated. The carbonation temperature in the range of 630 °C–700 °C is beneficial to the carbonation reaction of modified dolomite. The carbonation conversion for modified dolomite is significantly higher than that for original sorbent at the same reaction conditions with increasing numbers of reaction cycles. The modified dolomite exhibits a carbonation conversion of 0.6 after 20 cycles, while the unmodified sorbent shows a conversion of 0.26 at the same reaction conditions, which is calcined at 920 °C and carbonated at 650 °C. At the high calcination temperature over 920 °C modified dolomite can maintain much higher conversion than unmodified sorbent. The mean grain size of CaO derived from modified dolomite is smaller than that from original sorbent with increasing numbers of reaction cycles. The calcined modified dolomite possesses greater surface area and pore volume than calcined original sorbent during the multiple cycles. The pore volume and pore area distributions for calcined modified dolomite are also superior to those for calcined unmodified sorbent during the looping cycle. The modified dolomite is proved as a new and promising type of regenerable CO₂ sorbent for industrial applications.     

Industrial wastes derived solid adsorbents for CO2 capture: A mini review

Coal combustion in thermal power plants throughout the world produces large amounts of fly ash. Disposal of fly ash is a serious threat to the environment and hence is a worldwide concern for conversion of these wastes into useful products. Synthesis of mesoporous silica materials from coal fly ash has already been proposed as an option which can be utilized as an adsorbent. Adsorption is considered to be one of the more promising technologies for capturing CO₂ from flue gases. This paper reviews the recent development of solid adsorbents from industrial waste materials with special reference to fly ash for post-combustion capture of CO₂.     

Enhancement of reactivity in surfactant-modified sorbent for CO2 capture in pressurized carbonation

The calcination/carbonation loop of calcium-based (Ca-based) sorbents is considered as a viable technique for CO₂ capture from combustion gases. Recent attempts to improve the CO₂ uptake of Ca-based sorbents by adding calcium lignosulfonate (CLS) with hydration have succeeded in enhancing its effectiveness. The optimum mass ratio of CLS/CaO is 0.5 wt.%. The reduction in particle size and grain size of CaO appeared to be parts of the reasons for increase in CO₂ capture. The primary cause of increase in reactivity of the modified sorbents was the ability of the CLS to retard the sintering rate and thus to remain surface area and pore volume for reaction. The CO₂ uptake of the modified sorbents was also enhanced by elevating the carbonation pressure. Experimental results indicate that the optimal reaction condition of the modified sorbents is at 0.5 MPa and 700 °C and a high conversion of 0.7 is achieved after 10 cycles, by 30% higher than that of original limestone, at the same condition.     

Optimization of CO2 capture process with aqueous amines using response surface methodology

Amine is one of candidate solvents that can be used for CO₂ recovery from the flue gas by conventional chemical absorption/desorption process. In this work, we analyzed the impact of different amine absorbents and their concentrations, the absorber and stripper column heights and the operating conditions on the cost of CO₂ recovery plant for post-combustion CO₂ removal. For each amine solvent, the optimum number of stages for the absorber and stripper columns, and the optimum absorbent concentration, i.e., the ones that give the minimum cost for CO₂ removed, is determined by response surface optimization. Our results suggest that CO₂ recovery with 48 wt% DGA requires the lowest CO₂ removal cost of $43.06/ton of CO₂ with the following design and operating conditions: a 20-stage absorber column and a 7-stage stripper column, 26 m³/h of solvent circulation rate, 1903 kW of reboiler duty, and 99°C as the regenerator-inlet temperature.     

Thermodynamic performance of O2/CO2 gas turbine cycle with chemical recuperation by CO2-reforming of methane

This paper proposes a novel power cycle system composed of chemical recuperative cycle with CO₂–NG (natural gas) reforming and an ammonia absorption refrigeration cycle. In which, the heat is recovered from the turbine exhaust to drive CO₂–NG reformer firstly, and then lower temperature heat from the turbine exhaust is provided with the ammonia absorption refrigeration system to generate chilled media, which is used to cool the turbine inlet gas except export. In this paper, a detailed thermodynamic analysis is carried out to reveal the performance of the proposed cycle and the influence of key parameters on performance is discussed. Based on 1 kg s⁻¹ of methane feedstock and the turbine inlet temperature of 1573 K, the simulation results shown that the optimized net power generation efficiency of the cycle rises up to 49.6% on the low-heating value and the exergy efficiency 47.9%, the new cycle system reached the net electric-power production 24.799 MW, the export chilled load 0.609 MW and 2.743 kg s⁻¹ liquid CO₂ was captured, achieved the goal of CO₂ and NO_x zero-emission.     

Experimental and modeling of CO2 capture by dry sodium hydroxide carbonation

In this work, CO₂ capture from the air using dry NaOH sorbents has been studied. The influences of the main operating parameters such as temperature, air humidity, and NaOH loading on the CO₂ removal rate have been experimentally investigated using Taguchi method. The results revealed that the appropriate value of the temperature to maximize the rate was in the range of 35–45 °C. A multilayer artificial neural network (ANN) was also used to model the process in order to find the optimal conditions. A procedure reported in the literature was modified and applied to design the ANN model. The model predictions were validated by conducting some more experiments. The experimental results proved the accuracy of the model to predict the optimal conditions. The effects of NaOH particle size and multiple carbonation cycles have also been investigated.     

Dynamic modeling and validation of absorber and desorber columns for post-combustion CO2 capture

The paper evaluates, by modeling and simulation, carbon dioxide capture in aqueous solution of mono-ethanolamine (MEA) in packed absorption columns to be used in power sector for reducing greenhouse gas emissions. The mathematical model of carbon dioxide absorption and rich amine regeneration process includes transfer processes: mass and heat to study the coupled effect of temperature and concentration on the rate of absorption. The reaction kinetics and the vapor-liquid equilibrium (VLE) are other important parts of the model. The present dynamic mathematical model can be used to analyze the absorption rate, to understand the micro level interaction of various processes taking place inside the absorption and desorption column, and to improve the overall design of the system.The aim of the project was to validate the absorber and desorber models, as well as to understand the dynamic behavior of the whole capture-regeneration steps.     

Separation and capture of carbon dioxide from CO2/H2 syngas mixture using semi-clathrate hydrates

The relation between anthropogenic emissions of CO₂ and its increased levels in the atmosphere with global warming and climate change has been well established and accepted. Major portion of carbon dioxide released to the atmosphere, originates from combustion of fossil fuels. Integrated gasification combined cycle (IGCC) offers a promising fossil fuel technology considered as a clean coal-based process for power generation particularly if accompanied by precombustion capture. The latter includes separation of carbon dioxide from a synthesis gas mixture containing 40 mol% CO₂ and 60 mol% H₂.A novel approach for capturing CO₂ from the above gas mixture is to use gas hydrate formation. This process is based on selective partition of CO₂ between hydrate phase and gas phase and has already been studied with promising results. However high-pressure requirement for hydrate formation is a major problem.We have used semiclathrate formation from tetrabutylammonium bromide (TBAB) to experimentally investigate CO₂ capture from a mixture containing 40.2 mol% of CO₂ and 59.8 mol% of H₂. The results shows that in one stage of gas hydrate formation and dissociation, CO₂ can be enriched from 40 mol% to 86 mol% while the concentration of CO₂ in equilibrium gas phase is reduced to 18%. While separation efficiency of processes based on hydrates and semi-clathrates are comparable, the presence of TBAB improves the operating conditions significantly. Furthermore, CO₂ concentration could be increased to 96 mol% by separating CO₂ in two stages.     

新型CO2低温捕集与N2/O2分离复合系统性能分析

提出了一种CO₂低温捕集液化与N₂/O₂分离的新型复合系统,并且对该系统的性能以及优势进行了分析。这一系统不仅将CO₂低温捕集液化与N₂/O₂的分离结合起来,而且能达到降低能耗与减少投资的目的。采用理论分析和软件模拟相结合的方法,对该系统进行可行性分析。结果显示,这一新型系统不仅能量消耗低于传统醇胺吸收捕集CO₂的系统,该新型复合系统捕集1 t CO₂耗能3.29 GJ·t^-1,而传统MDEA吸收法耗能4.11 GJ·t^-1。而且在该系统中,CO₂分离液化的同时,可以获得副产物N₂与O₂。本研究阐明了一种CO₂低温捕集液化与N₂/O₂分离复合系统的新思想。