Fabrication and electrochemical characterization of polyaniline nanorods modified with sulfonated carbon nanotubes for supercapacitor applications

The novel composites of sulfonated multi-walled carbon nanotubes (sMWCNTs) modified polyaniline (PANI) nanorods (PANI/sMWCNTs) were synthesized successfully by in situ oxidative polymerization method in the HClO₄ solution. FTIR and Raman spectra revealed the presence of π–π interaction between the PANI and the sulfonated carbon nanotubes and the formation of charge transfer composites. It was found that the specific capacitance of the PANI/sMWCNT composites was markedly influenced by their morphological structure and the content of PANI which was coated onto the sMWCNT. The specific capacitance of the PANI/sMWCNT composite exhibited a maximum value of 515.2 F g⁻¹ at the 76.4 wt% PANI. The charge–discharge tests showed the PANI/sMWCNT composites possessed a good cycling stability (below 10% capacity loss after 1000 cycles) compared to PANI nanorods.     

Self-standing manganese dioxide/graphene carbon nanotubes film electrode for symmetric supercapacitor with high energy density and superior long cycling stability

The low capacitance utilization and capacitance fading of manganese dioxide (MnO₂) is mainly due to poor electro-conductivity and irreversible phase transform. This work proposes a new method of designing hierarchical and binder-free electrode based on MnO₂ material for stable supercapacitor with high specific capacitance. Herein, we fabricated the self-standing electrode of MnO₂ on nitrogen-doped graphene and single wall carbon nanotubes (SWCNTs) self-standing film (NGCF) by electrochemical deposition. As a result, as-prepared MnO₂/NGCF cathode showed excellent electrochemical performance of 489.7 F g^-1 at 1 A g^-1. Assembled symmetric aqueous supercapacitor (SC) manifests high voltage of 2.4 V and presents excellent high energy density of 106.7 Wh kg^-1 at 1200 W kg^-1 and outstanding long-life stability without no decay after 10 000 charge-discharge circuits. This work proposes a new view of designing hierarchical and binder-free electrode with high energy density and long cycling stability based on MnO₂ material for stable symmetric supercapacitor.     

Enhanced performance by polyaniline/tailored carbon nanotubes composite as supercapacitor electrode material

Polyaniline/tailored carbon nanotubes composite (PANI/TCN) synthesized via situ polymerization of aniline monomer in the presence of tailored carbon nanotubes (TCN) is reported as electrode material for supercapacitors. The morphology, structure, and thermostability of the composite were characterized by scanning electron microscope, Fourier transform infrared, and thermogravimetric analysis. The electrochemical property of the resulting material was systematically studied using cyclic voltammetry and galvanostatic charge–discharge. The results show that the short rod‐like PANI dispersed well in the TCN with three‐dimensional network structure. The as‐prepared composite shows high specific capacitance and good cycling stability. A specific capacitance of 373.5 F g^?1 at a current density of 0.5 A g^?1 was achieved, which is much higher than that of pure PANI (324 F g^?1). Meanwhile, the composite retains 61.7% capacity after 1000 cycles at a scan rate of 50 mV s^?1. The enhanced specific capacitance and capacity retention indicates the potential of composite as a promising supercapacitor electrode material. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39971.     

Preparation and electrochemical performance of polyaniline-based carbon nanotubes as electrode material for supercapacitor

Nitrogen-containing carbon nanotubes (CNTs) with open end and low specific surface area were prepared via the carbonization of polyaniline (PANI) nanotubes synthesized by a rapidly mixed reaction. On the basis of analyzing the morphologies and structures of the original and carbonized PANI nanotubes, the electrochemical properties of PANI-based CNTs obtained at different temperatures as electrode materials for supercapacitors using 30 wt.% aqueous solution of KOH as electrolyte were investigated by galvanostatic charge/discharge and cyclic voltammetry. It was found that the carbonized PANI nanotubes at 700 °C exhibit high specific capacitance of 163 F g⁻¹ at a current density of 0.1 A g⁻¹ and excellent rate capability in KOH solution. Using X-ray photoelectron spectroscopy measurement the nitrogen state and content in PANI-CNTs were analysed, which could play important roles for the enhancement of electrochemical performance. When the appropriate content of nitrogen is present, the presence of pyrrole or pyridone and quaternary nitrogen is beneficial for the improvement of electron mobility and the wettability of electrode.     

Fabrication of graphene/single wall carbon nanotubes/polyaniline composite gels as binder-free electrode materials

A three-dimensional (3D) graphene-based hydrogels system containing one-dimensional (1D) carbon material-single wall carbon nanotubes (SWCNTs) and pseudocapacitor material-polyaniline (PANI) was prepared by combination of cross-linking, reduced and in situ polymerization. The polyaniline nanoparticles were combined with the reduced graphene sheet by π-π conjugation. The as-perpared composite gels could be directly used as electrode materials without binders. Due to the synergistic effect between SWCNTs, graphene sheet and PANI, the graphene/single wall carbon nanotubes/polyaniline (GH/SWCNTs/PANI) composite gel shows the enhanced electrochemical performances. The resultant GH/SWCNTs/PANI gel electroactive material shows a gravimetric specific capacitance of 145.4 F/g at 0.5 A/g and has improved 45% compared with initial graphene hydrogel (GH) at the same current density. And it keeps high retention of 98.8% of the initial capacity after 10,00 charge/discharge cycles at high current density of 10 A/g. The great cycle stability achieved is fundamentally attributed to the support of graphene sheet and single wall carbon nanotubes, which favors stress distribution and charge transfer during the longtime charge/discharge process. The graphene-based hydrogels could be a potential applicant for high rate charge/discharge applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 46948.     

Fabrication and electrochemical capacitance of hierarchical graphene/polyaniline/carbon nanotube ternary composite film

A film composed of graphene (GN) sheets, polyaniline (PANI) and carbon nanotubes (CNTs) has been fabricated by reducing a graphite oxide (GO)/PANI/CNT precursor prepared by flow-directed assembly from a complex dispersion of GO and PANI/CNT, followed by reoxidation and redoping of the reduced PANI in the composite to restore the conducting PANI structure. Scanning electron microscope images indicate that the ternary composite film is a layered structure with coaxial PANI/CNT nanocables uniformly sandwiched between the GN sheets. Such novel hierarchical structure with high electrical conductivity perfectly facilitates contact between electrolyte ions and PANI for faradaic energy storage and efficiently utilizes the double-layer capacitance at the electrode–electrolyte interfaces. The specific capacitance of the GN/PANI/CNT estimated by galvanostatic charge/discharge measurement is 569 F g⁻¹ (or 188 F cm⁻³ for volumetric capacitance) at a current density of 0.1 A g⁻¹. In addition, the GN/PANI/CNT exhibits good rate capability (60% capacity retention at 10 A g⁻¹) and superior cycling stability (4% fade after 5000 continuous charge/discharge cycles).     

Electropolymerization of polyaniline on titanium oxide nanotubes for supercapacitor application

Vertically aligned polyaniline (PANI) nanotubes have great potential application in supercapacitor electrode material. In this paper we have investigated facile growth of PANI nanotubes on a titanium nanotube template (TNT) using electrochemical polymerization. The morphology of PANI nanostructures grown over TNT is strongly influenced by the scan rate in the electrochemical polymerization. The growth morphology of PANI nanotubes has been carefully analyzed by field emission scanning electron microscopy. The detailed growth mechanism of PANI nanotubes has been put forward. Specific capacitance value of 740 F g⁻¹ was obtained for PANI nanotube structures (measured at charge–discharge rate of 3 A g⁻¹).     

Facile in-situ preparation of polyaniline/graphene nanocomposites using methanesulfonic acid

Polyaniline (PANI)/graphene composites were prepared by the in-situ polymerization of aniline in a 1 M aqueous solution of methanesulfonic acid (MSA) containing graphene, which was prepared separately from graphite powders by simple sonication in MSA. Graphite powders spontaneously exfoliated to form graphene (GPM), which was then quenched with excess water, filtered, and dried to produce powders. The dried graphene powders produced were re-dispersed well in a 1 M MSA aqueous solution, in which the in-situ polymerization of aniline was performed. The resulting PANI/GPM composite had a conducting emeraldine salt (ES) form, and showed good electrical and thermal properties, compared to pure PANI prepared using a 1 M HCl solution. The PANI/GPM composite could be dissolved in a MSA solution and spin-coated in a conducting ES form of PANI. In contrast, the ES form produced from a HCl solution was insoluble in organic solvents and needed to be reduced to convert it to the emeraldine base form to produce a PANI solution. Therefore, the in-situ preparation of PANI/graphene composites using MSA provides a facile means of improving the thermal and electrical properties of PANI and its processability.     

Stable nanostructured polyaniline electrode for supercapacitor application

In this work, we present a chemical strategy for the synthesis of stable nanostructured polyaniline electrodes for supercapacitor applications. Based on field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM) analysis, average nanograined polyaniline electrode diameter was found to be 20–30 nm. The specific capacitance reaches a maximum value of 503 F g⁻¹ with a specific energy and a specific power of 96.23 Wh kg⁻¹ and 8.88 kW kg⁻¹, respectively. Additionally, a working toy fan is demonstrated.     

Layer-by-layer assembly of graphene/polyaniline multilayer films and their application for electrochromic devices

Graphene/polyaniline (PANI) multilayer films were prepared via alternate deposition of negatively charged graphene oxide (GO) and positively charged PANI upon electrostatic interaction, followed by the reduction of their GO components with hydroiodic acid. The thickness of the multilayer film increased linearly with the number of its bilayers and that of each bilayer was measured to be about 3 nm. Cyclic voltammetry studies indicated that these thin composite films were electroactive, and their redox reactions were related to the insertion-extraction of counter ions in PANI layers. Furthermore, the composite films were tested to be promising electrode materials for electrochromic devices even without using the conventional indium tin oxide (ITO) electrodes.     

Influence of microstructure on the capacitive performance of polyaniline/carbon nanotube array composite electrodes

A series of polyaniline/carbon nanotube array (PANI/CNTA) composite electrodes are prepared by electrodeposition of PANI onto CNTA electrodes by 100-500 cyclic voltammetry (CV) cycles, with the aim to investigate the influence of microstructure on the capacitive performance of PANI/CNTA composites. The morphology of PANI/CNTA composites varies remarkably with the CV cycles of electrodeposition. The optimum condition is obtained for the PANI/CNTA composite prepared by 100 CV cycles, corresponding to the highest specific capacitance, best rate performance, and longest cycle life, which are much better than that of activated carbon fiber cloth, the PANI electrodeposited on stainless steel substrate, and CNTA electrode. The forming process of the microstructure and its influence on the capacitive performance of PANI/CNTA composites are presented in this paper.     

The genesis of polyaniline nanotubes

Aniline has been oxidized with ammonium peroxydisulfate in 0.4 M acetic acid. Protons are produced in the course of oxidation and the pH decreases as the reaction proceeds. The oxidation had two subsequent phases: (1) the oxidation of the neutral aniline molecules and the initially produced low-molecular weight aniline oligomers at low acidity, followed by (2) the oxidation of the anilinium cation after the acidity became higher. The two phases of oxidation gave different products, aniline oligomers with mixed ortho- and para-coupling of aniline molecules, and polyaniline nanotubes, respectively.The aniline oligomers are produced at first at low acidity, pH > 4, some of them as rod-like crystals. The molecular weight of the oligomers has been assessed by gel-permeation chromatography to be of several thousands. The 2-3 wt.% content of sulfur in deprotonated samples suggests that the oxidation products are partly sulfonated. The oxidation of ortho-coupled anilines combined with intramolecular cyclization produces phenazine units or their blocks, as indicated by FTIR spectra. A high-molecular weight polyaniline is produced at pH < 2. The protonation of the intermediate pernigraniline form of polyaniline is a prerequisite for the polymerization.The nano-sized oligomer crystallites serve as starting templates for the nucleation of PANI nanotubes. Further growth of nanotubes proceeds by the self-organization of the phenazine units or their blocks located at the ends of the PANI chains. Polyaniline nanotubes have a typical outer diameter of 100-200 nm, with a wall thickness of 50-100 nm, an inner diameter of 0-100 nm, and a length extending to several micrometres.     

The additive-free electrode based on the layered MnO2 nanoflowers/reduced,graphene oxide film for high performance supercapacitor

The MnO₂ nanoflowers/reduced graphene oxide composite is coated on a nickel foam substrate (denoted as MnO₂ NF/RGO @ Ni foam) via the layer by layer (LBL) self-assembly technology without any polymer additive, following the soft chemical reduction. The layered MnO₂ NF/RGO composite is uniformly anchored on the Ni foam skeleton to form the 3D porous framework, and the interlayers have access to lots of ions channels to improve the electron transfer and diffusion. This special construction of 3D porous structure is beneficial to the enhancement of electrochemical property. The specific capacitance is up to 246 F g⁻¹ under the current density of 0.5 A g⁻¹. After 1000 cycles, it can retain about 93%, exhibiting excellent cycle stability. The electrochemical impedance spectroscopy measurements confirm that MnO₂ NF/RGO @ Ni foam electrode has lower R_ESR and R_CT values when compared to MnO₂ @ Ni foam and RGO @ Ni foam. This study opens a new door to the preparation of composite electrodes for high performance supercapacitor.     

Hierarchical MnNiCo ternary metal oxide/graphene nanoplatelets composites as high rated electrode material for supercapacitors

For achieving a higher supercapacitor performance, electrode material with high surface area and conductivity such as graphene, graphene nanoplatelets (GNP), and carbon nanotubes along with Transition Metal oxides (TMO) can be used. Herein, the composite of graphene nanoplatelets with ternary metal oxide of manganese, nickel, and cobalt (MNC) is synthesized through a facile cost-effective hydrothermal process and its compositional, morphological, and electrochemical properties are investigated. As-synthesized MNC-GNP composite showed excellent electrochemical properties owing to the high porosity offered by graphene nanoplatelets and synergistic effects produced by individual components of the composite. For comparative studies, ternary oxide MNC was prepared by the same hydrothermal route. The cubic structure of the MNC-GNP composite is confirmed by X-ray diffraction (XRD). Scanning Electron Microscope (SEM) showed distinct hierarchical dendritic structures which showed an increase in density by the addition of graphene nanoplatelets. Electrochemical testing revealed that MNC-GNP exhibited an enhanced specific capacity of 605 mAh g^-1 which is higher compared to MNC which exhibited 243 mAh g^-1 at a current density of 2 mV s^-1. GCD also depicted an increased charge-discharge time in the case of MNC-GNP as compared to its counterpart. MNC-GNP has also shown charge stability up to 99.5 % of capacity retention up to 1000 cycles. Hence, synthesized composite shows to be an effective electrode material for supercapacitors owing to enhanced electrochemical properties.     

In situ electrochemical preparation of multi-walled carbon nanotubes/polyaniline composite on the stainless steel

Polyaniline–carbon nanotubes (PANI–CNTs) composites have been deposited via in situ electropolymerization on stainless steel (SS) surface. The presence of the oxidized multi-walled carbon nanotubes (mCNTs) in the composite was confirmed by thermal gravimetric analysis (TGA) and scanning electron microscope. Introducing 28 and 70 mg L⁻¹ mCNT in the electrolyte increased the growth rate of PANI from 38 to 67 and 83 mC/cycle, respectively. The mCNT decreases the porosity of the PANI, forming networks which held the polymer. Influences of the composite layer on the passivation and corrosion of the stainless steel were studied and compared with pure PANI layer. It was confirmed that a higher resistant passive film was formed on the steel under the composite layer compared to that formed under the pure PANI.     

石墨烯/聚吡咯复合电极材料超电容性能研究进展

分析了目前石墨烯和聚吡咯(PPy)用作电极材料的不足,详细介绍了近年来超级电容器用石墨烯/PPy复合电极材料的研究进展,指出石墨烯/PPy复合材料在能量转换和存储领域的未来发展方向.     

Reduced chemically modified graphene oxide for supercapacitor electrode

An efficient active material for supercapacitor electrodes is prepared by reacting potassium hydroxide (KOH) with graphene oxide followed by chemical reduction with hydrazine. The electrochemical performance of KOH treated graphene oxide reduced for 24 h (reduced chemically modified graphene oxide, RCMGO-24) exhibits a specific capacitance of 253 F g^-1 at 0.2 A g^-1 in 2 M H₂SO₄ compared to a value of 141 F g^-1 for graphene oxide reduced for 24 h (RGO-24), and good cyclic stability up to 3,000 cycles. Interestingly, RCMGO-24 demonstrated a higher specific capacitance and excellent cycle stability due to its residual oxygen functional groups that accelerate the faradaic reactions and aid in faster wetting. This non-annealed strategy offers the potential for simple and cost-effective preparation of an active material for a supercapacitor electrode.     

Improving the electrochemical performance of polyaniline electrode for supercapacitor by chemical oxidative copolymerization with p-phenylenediamine

A series of poly(aniline-co-p-phenylenediamine) (P(ANI-co-PPDA)) copolymers were synthesized via the chemical oxidative polymerization of aniline with p-phenylenediamine (PPDA) as the comonomer. The structure and morphology of the P(ANI-co-PPDA) copolymers prepared with different feeding ratio of PPDA under different polymerizing temperature were compared with the two homopolymers polyaniline (PANI) and poly(p-phenylenediamine) (PPPDA). It is interesting to find that the electrical conductivity, specific capacitance and cycling stability of the P(ANI-co-PPDA) copolymer electrode materials were obviously improved with certain feeding ratio of PPDA, compared with those two homopolymers.     

Facile synthesis of graphene/polyaniline composite hydrogel for high-performance supercapacitor

The graphene/polyaniline (PANI) composite hydrogel was successfully prepared by a one-step hydrothermal method. The morphology and structure of the sample were characterized by digital camera, scanning electron microscopy, and Fourier transform infrared spectroscopy spectra. By combining the advantages of high conductivity of graphene and high pseudocapacitance of PANI, the composite hydrogel was taken as supercapacitor electrode material. Cyclic voltammetry and galvanostatic charge/discharge experimental results show that the composite has excellent electrochemical performance. The specific capacitance value is 258.5 F g^?1 at a scan rate of 2 mV s^?1 and the specific capacitance value is up to 307 F g^?1 at a current density of 0.2 A g^?1. The specific capacitance value can still maintain 90 % of the initial value after repeating the galvanostatic charge–discharge for 1000 cycles at a current density of 1.0 A g^?1 showing good cycle stability.     

Influence of multi-walled carbon nanotubes on the electrochemical performance of graphene nanocomposites for supercapacitor electrodes

In this work, multi-walled carbon nanotube (MWNT) bonded graphene (M-GR) composites were prepared using the chemical reduction of graphite oxide (GO) and acid treated MWNTs with different ratios. The M-GR/polyaniline (PANI) nanocomposites (M-GR/PANI) were prepared using oxidation polymerization. The effect of the M-GR ratio on the electrochemical performances of the M-GR/PANI was investigated. It was found that the substrate 2D graphene was coated with 1D MWNTs by chemical reduction and the M-GR was further coated with PANI, leading to increased electrical properties by the π–π interaction between the M-GR and PANI. In addition, the electrochemical performances, such as the current density, charge–discharge, and specific capacitance of the M-GR/PANI were higher than those of graphene/PANI and the highest specific capacitance (1118 F/g) of the composites was obtained at a scan rate of 0.1 A/g for the PANI containing a 0.5 M-GR ratio compared to 191 F/g for the graphene/PANI. The dispersion of the MWNTs onto the graphene surface and the ratio of M-GR had a pronounced effect on the electrochemical performance of the PANI-based composites, which was attributed to the highly conductive pathway created by the M-GR incorporated in the PANI-based composites and the synergistic effect between M-GR and PANI.